Opendocument without the header information

I'm using opendocument to open some webi reports. When it opens up the IE window, it displays with the toolbars at the top. Is it possible to have it open only with the contents of the reports? i.e report title, and the data itself? I know for Crystal reports you can have it only display components but don't see how for webi docs.
Thanks
Steve

Found the answer: Supress Infoview toolbar when linking to reports using opendocument

Similar Messages

I am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going of

i am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going off. Can some one help?

Hi Jay,
Be aware that "Freeze Header Rows" and "Freeze Header Columns" apply only to rows and columns that are Header rows or Header columns. You can have up to five Header rows, Five Header Columns (and five Footer rows) on a Numbers Table.
"Header rows" is a special designation. Besides being able to be frozen, Header and Footer rows are not included in formulas referencing whole columns, making it possible to place formulas such as =SUM(B) at the top (or bottom) of column B without causing a self-reference error, These designated rows are also not included in sorts of the rows in a table.
Regards,
Barry

How can I include the Header Information....for a File to IDOC Scenario

Hi,
I made a File to IDOC Scenario with DEBMDM06 for MDM>XI>SAP R/3. The Header Information in the XML File which is at the XI end is Missing. For that reason In Tcode SXMB_MONI we are getting an Error that "HEADER Information Missing: Message should Start with EDI_DC40" i.e the Header Information.
My Question is that whether we can do some changes in the Message mapping Step in the Integration Repository. I HardCoded the Few mandatory Fields that were there but it Again gave me the Same Error as above.
Can you please Suggest some Solution for this. Since the data is Coming in from MDM part the Header information is not there but It actually Important as it has got all the Port Information.
Kindly Inform me some Solutions.
Thanks & Regards
Somnath

Hi Suraj,
Thanks for ur Reply, but Since we are Doing a File to IDOC Scenario the IDOC DEBMDM is on the Right Side in Message Mapping and as U know it is Mandatory to Map an IDOC on the Right Part. EDI_DC40 is coming as it is there in the IDOC but our XML File Does not have that. If we Don't Map then it Becomes RED, which is an Error.
Furthermore in the Receiver Agreement we have put the Necessary Details such as Sender Service and Receiver Service along with the IDOC Communication Channels.
Can U give as a Better Insight on this Note how to check the Header Part as it is mandatory to MAP.We also tried to HARDCODE it by putting those Values and Mapping them to a Constant but it is Giving the Same Error.
Thanks and Regards
Somnath

Help Needed regarding the Header Information

Hi,
I am doing a File to IDOC Scenario for CREMDM. The problem I am Facing is that the Basic type is as CREMDM but it should be CREMAS. I am invoking the Function Module IDOC_INPUT_CREDITOR_MDM and I have made a 'Z' out of that. I have also Used a Custom Process Code to link with this Z Function Module, but it is giving me the Error that " Wrong Function Module Called up". In this Z Function Module I have also checked the Exception of "WRONG FUNCTION CALLED".
Can someone tell me the details of how I can know from where the Header Information is being populated and how i.e. the EDI_DC part.
I did the same thing (i.e. made a Z Function Module and a Z Process Code for DEBMDM) and it is working. In case of the CREMDM scenario, there is a check in the Function Module which checks the IDOCtype and it is giving an error there, whereas in the Header it is coming as CREMAS04 but the Function Module is Giving me an Error.
 Can someone Suggest me how I can go about a file to IDOC Scenario for CREMDM and which Function Module i need to Invoke.
Thanking in anticipation.
Warm Regards
Somnath

Hi,
Since this is file to idoc scenrio,the header inforamtion will be populated with the information provided in the mapping part i.e,it will be dependent on the fields mapped during the message mapping in XI .
so the edc_dc control record parameters should be populated with the parameters mapped during the messsage mapping,depending on the file parameters or the constant defined during mapping.
and in your case if the message type is CREMDM then the basic type has to be CREMDM04,which u hav to chk with the xi ppl who performed the mapping.since it is mapped to CREMAS04 u r getting a error in function module.so try changing basic type to CREMDM04.
regards
jithesh

How to print the header information journal from FB03

Hi
I would like the FB03 to show the header e.g. Entered by/ Parked by on the screen, without clicking the header button. So I can print the journal via printer with those information.
Thank you
Sirirak

Hey,
This also depends from the SAP release that you are using.
Release undependent I suppose you have the following possibilities:
- Use the line item extract report S_ALR_87012347. Here at least you can see the entry date (this transaction does of course not work for parked documents.
- Create a query on an infoset mit logical database BRM
Best regards,
Koen

I bought an iPod 5 on ebay, it's iCloud locked, how can I remove it from original owners Apple ID without the owners information?

I bought an iPod on eBay, without knowing that it was iCloud locked. I contacted the seller and he said he bought it iCloud locked, and did not know the original Apple ID or password. Is there a way I can remove the iPod from the original owners ID without the original owners information?

The only way is to have the AppleID and password of the ptrvious owner.
Without that information, it is totally worthless to you. think iPod shaped brick,
Return it to eBay and ask for a refund.

How do you print from safari without the header and footer?

I may be missing something but...
When printing in Safari how do you remove the header and footer. I am using PDF creator to save pages as PDF for things like online pay slips and want them to be 'clean'.
Running Safari 5.1 on Windows Vista
Thanks in advance for any help.
Mark

I may be missing something but...
When printing in Safari how do you remove the header and footer. I am using PDF creator to save pages as PDF for things like online pay slips and want them to be 'clean'.
Running Safari 5.1 on Windows Vista
Thanks in advance for any help.
Mark

I am trying to export all of the separate audio files from Logic Pro X so that I can transfer them into pro Pro Tools, however it won't let me do it without the panning information. The option to untick panning is greyed out. How can I do it?

I have exported the separate audio files, but it contains the panning information. When the export pop up window opens, the export with panning information box is ticked, but it is greyed out so it won't let me unselect it. How do I fix this problem?

A brief and probably non-helpful answer: I know of no way to eliminate your large amount of duplicates other than by repetitive, tedious manual effort.
*There has got to be a simpler way.*
I hope you're right, but I don't think there is a simpler way.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
Yes, really

Any way to print an email without the header/contact image?

Friend of mine doesn't have a printer and he sent me an important email to print out for him.
However it prints the [Address Book] contact image as well - not only does this waste ink, but I don't want the goofy contact image I have of him printed on 'official' documents. Is there any way to not print the header part at all, or at least not the contact image?
Thanks
Message was edited by: Sean Mooney

Just select the text you want to print and paste it into a text edit document and print from there.

Capturing only software screens without the browser information

Hello, I'm looking for a way to capture only the application part of the screen for a software demo. I've defined the size of the capture area but every time i record, captivate places the capture area at the top of the browser screen. i don't want the url, toolbars and favorites, etc in the demo., only the application area. Pulling down the capture area manually each time is not precise enough and causes small jumps or shifts in the screen captures. Any help would be much appreciated.

Hi There,
Please try use Application>Application region from the recording window. Try to use Internet Explorer as your Browser.
Regards,
Mayank

I want to print the front panel without all the header stuff while the vi is running

I want to print the vi front panel without all the header information that Labview puts at the top. I want to do all this while the vi is running by pushing a button.

One option is to use the the 'Print VI to Printer' method. Beware that invoking this method repeatedly with complex front panels has caused me graphics problems in my VI's display that persist until the development environment or the built .exe app is exited and re-entered.
See: http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=5065000000080000005F5A0000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=spaz+print&USEARCHCONTEXT_QUESTION_S=0
NI has confirmed this to be a bug in 6.0x and 6.1 and has indicated that it will be fixed in the next version.
I was forced to fall back on the Append Front Panel Image to Report.vi in the report toolkit. Which does not produce printed graphs of as high as quality as the Print VI to
printer method.

Header Information Repeating in the Same Page

Hi Buddies,
I have an issue with PO Print Report. I am trying to reapet the header information by using <?start:body?> after the header informaiton and <?end body?> before the footer informaiton.
If i have two different headers, it displayed in the same page. For e.g I have po header details for PO 30124 and PO 30124-1. These two headers information displaying in all the pages and main body and footer informations goes to the next page.
pls guide me how to solve this one?
Regards
Prabu

Hi,
Are you saying that you need conditional headers? If so, then use <?IF ...> statements.
If your footer is not working correctly make sure your syntax is correct?
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/

How to use a dynamic SQL data as the header ?

I'm using BO XI Rel 2. I have hard coded the report headers, but i do have a table wherein the header data is available. I like to fetch the HEADER information from the table, rather than hard coding. How to go about it?
Example: "Statement of Closing" is the header.
The above output can be retrieved by using the below query!
Select Form_desc from TBS_FORMS where form_id = 'tbs1a';
form_id is a common link between tables!! Since the actual report data has multiple value as output, just by plugging the query in the header, i'm getting #multivalue error!!!!
In oracle reports, i have something called place holder to achieve the above objective. In BO, how to go about it?
Edited by: Karthik Ganesan on Dec 28, 2008 1:22 PM

Sorry, that doesn't solve my problem. Please read the question more closely - I want my USERS to be able to do this without changing their configurations. My users are public school elementary teachers and parents. I can't ask them to toggle any settings - I'm looking for a way that my users can do this on their own.
Thanks

Using POP3, possible downloading mails without the attachment?

Hello,
I am constructing an email client, with limited system resources, using JavaMail and pop3. I can only download mails that are about 8kb. So if an email has a large attachment I can not download it. I am however still interested in what the textual body of the email says. I know that the header information can be downloaded without downloading the whole email but can the textual body be downloaded without downloading the attachment?

Hi,
As far as I know, you are unable to do this with the standard POP transport protocol since the attachement is actually a part of the body (encoded, multi-part), so there is no specific way for the server to know where the text body ends and the attachement body starts (most servers are mail content ignorant).
I suppose you could try to intercept the incoming TCP data and cut the communication short the moment you intercept a part seperator (the attachements normaly are at the end of the message .. yet this is not guaranteed as far as the RFC is concerned).
play around with:
com.sun.mail.pop3.POP3Message.getContentStream()
hope this helps a little.
frgd,
J.

I only want the header on the first page . How do I remove it from the other pages but leave it on the first page only.

Uncheck the Headers (and Footers) settings in the Document Inspector.
Enter the 'header information' directly on the first page, or put it into a text box. There's no need to use Headers if you want the information on only one page.
Regards,
Barry

Opendocument without the header information

Similar Messages

Maybe you are looking for