Opened eMac, and now it won't turn on
Hi,
I opened my eMac for the first time to clean out the dust. I just took of the outer cover and the wire to the power button came off. I thought I reattached it correctly. But now the computer will not turn on.
If someone knows what is wrong please help.
Thank You
... Just jumping in here. Having taken the shell casing of my eMac several times, I can say the wire is indeed allowed to come of the switch. They only fit one way however and are very fiddly to remove and attach.
What might have happened is that when removing the shell with the wires unknowingly still attached you might have internally yanked one or both from their connector, ie broken the wire.
A simple zero resistance test from a suitably equipped multimeter will tell you if the wire is broken or not. You will need a fine probe point to stick into the end of the connector.
See if you can test the switch in a disconnected state, just in the shell alone, as well.
Another thought is whether you washed the casing in water. If so, a wet switch will not work.
Similar Messages
-
I was syncing my phone to itunes and then my phone automatically locked and now it won't turn back on but when i plug it into a charger it makes the charging sound.
Hi lemmag17,
If your iPhone doesn't appear to be responding or turning on, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden -
I haven't used my iPod touch 4g in a while and now it won't turn on or connect to my computer to charge. holding power+home isn't working either. i've had it plugged in for a while, but i'm pretty sure that's pointless if it won't even connect....help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
iPod touch 3rd generation crashed while updating, and now it won't turn on, and it won't charge or be recognized in iTunes because it's completely dead; it's been dead for 3 days now. I've tried pressing home/sleep buttons for reset but nothing works, I've tried using different usb ports to charge it, but nothing seems to work. Please help asap. ...Thanks!(:
After charging the iPod for half an hour, see if placing the iPod in recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now
I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend! -
I cracked my iphone 4s screen and now it won't turn on
So I dropped my iphone 4s and cracked it and then I picked it up and now it won't turn on. I've tried plugging it into my wall, computer, etc. I don't know what to do, so what should I do? also will i be able to access my photos again because my photos aren't backed up or anything? also i would like to access my notes again? I'm so confused and don'please help!
Sounds to me like your phone is broken as well. Without a backup you've likely lost your data. You could try taking it into an Apple store or contact them and see if they have any way recovering your data. Likely not but worth a try.
-
my iphone 4 turned off and now it won't turn back on I've tried charging it and plugging it into my computer but it's still a blank screen. please help me.
Intel-based Macs: Resetting the System Management Controller (SMC)
-
I just updated my mom's Iphone 4, and now it won't turn on. When it does, there is a "itunes" icon, with the cord picture, which is asking me to connect to Itunes, I believe. Can't get past this screen to even turn it on. What do I do without having to restore her entire phone, which I have no idea how to do that?
You need to restore using the recovery mode described in http://support.apple.com/kb/HT1212 and may need to do that more than once to succeed.
-
Have updated my iPhone 5c to iOS 8 and restored it and now it won't turn on. I have tried plugging it in even though I know it was fully charged, I have shut down my rebooted my computer and iTunes from scratch and reconnected my phone and still nothing, any ideas?
Hello Nikmuz,
It sounds like your screen is either black so it looks like it is not on, or it is just plain not turning on at all and it is also not being recognized in iTunes. I would recommend the followng troubleshooting from this article to help you determine whether that is the case or not, named:
iPhone: Hardware troubleshooting
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
While connected to the iPhone charger, try to reset the iPhone.
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I dropped my iPhone 4S, and now it won't turn on...
I just got it, and I dropped it, and now it won't turn on. I usually always have cases on my phones, but I'm waiting for it to come in the mail. And just my luck, I dropped it.
I tried plugging it in to my computer, and it just makes the sync noise repeatedly. But won't turn on. Is this fixable? I really can't afford to buy a new one at $600. this close to Christmas. Please help me!Hmm. That helps. But I just got it through my service provider, so its only a week old. Lets hope its less then the $200!
Thanks! -
My phone keeps freezing and I have the 5s and now it won't turn on but I can talk to sir
My phone keeps freezing and I have the 5s and now it won't turn on but I can talk to sir
If you can talk to Siri, but the screen is not turning on, try the 2 button reset. Press and hold the Sleep/Wake (Power) Button and the Home Button at the same time for at least 10 seconds. http://support.apple.com/kb/ht1430
If that doesn't make you screen come back on, you can try restoring your iPhone. http://support.apple.com/kb/ht1414
iPhone hardware troubleshooting - http://support.apple.com/kb/ts2802
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
My issue is still not resolved. What do I do next?
Contact Apple Support. https://support.apple.com/kb/HE57 or https://selfsolve.apple.com -
I tried to update my phone last night. When I woke up, it said it needed to be connected to iTunes. I restored my phone and now it won't turn on and keeps saying it needs to be connected to iTunes.
probably need pc or mac update for ios 6 on your home device
-
I was working on my iPad and it turned off suddenly and now it won't turn back on. It was at least 50% charged and when I tried to connect the charger it still will not come on. Is there a reset button?
Thank you so much! It worked, I was reading around and saw this has happened to a number of iPad users. Thank you for your prompt response, I was so worried I broke it or something.
-
I turned my iphone off when visiting the doctor's surgery and now it won't turn back on. It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens. I have taken out and replaced the sim card too. Any suggestions
If wjosten's tip doesn't work try plugging it into a USB charger (not through your computer), wait about 30 seconds and it should come on. If it doesn't remove the cord from the phone and keep trying this. I've had this same issue and found a combination of the reset & charging cable tends to work. Sometimes it takes about 5 minutes for the phone to respond.
Best of luck. -
My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing the amber light. I don't know what to do, and this has never happened before.
Hello Toby135
Reset the SMC or System Management Controller to resolve issues with the power on your MacBook Pro and power adapter.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Regards,
-Norm G.
Maybe you are looking for
-
I am unable to connect my Macbook air, iPhone or iPad though bluetooth. I have tried all the suggestions I have read. i.e. toggle bluetooth on and off, turn devices on and off, forget devices and then pair. I seem to be able to pair but the devices i
-
Interactive Reporting is not opening in Hyperion workspace
Hi, I have installed Hyperion Foundation Services 11.1.1.1.0 and IR 11.1.1.1.0 I am trying to access IR through Workspace I could see the procedure like File-> New-> Document_> interactive reporting document. Then i have selected a .oce file to make
-
Problem in Service Pricing Procedure
Dear Experts, I am facing on interesting problem In service prices in Purchase Order - I have One vendor for material supply. So Material Pricing procedure has been assigned to him through Schema group vendor. and as a price determination process pri
-
Trouble with display on desktop.
I just made a site, and it formats perfectly on my laptop, but have heard from many people that it doesn't display well on their desktops. Has anyone had this problem before?
-
Hi Experts During vendor evaluation which program gets hit. particularly delivery date related. In the selection criteria the proposed delivery date is from PO creation date say if 5 days is the lead time, the PO creation date is 10.11.08 ,po releas