Opened FCP Clip In STP . . . Now How Do I Add Audio Tracks?

I have opened an FCP 6 video clip in STP and the video and 2 audio tracks are facing me.
I want to get rid of the clip's audio tracks and replace them with tracks on which I am going to create a musical background.
I am not concerned about deleting the original audio tracks as I can mute them back in FCP but I would like to add some new tracks for the music.
It was dead simple in the old Soundtrack 1.5 but how do I do it in STP ?

I'm on STP 2.0.2 and page 409 doesn't seem to have anything relevant but your sentences do!
I tried "Send to STP Multitrack Project" and that seems to fit the bill.
So why didn't I try it earlier? I made an assumption . . . . . I assumed that "multitrack" was synonymous with "multicam" and as I wasn't exporting a multicam file, it would not be appropriate.
It's not the first time I have been tripped up by terminology.
Thanks for nudging me in the right direction, Paul.

Similar Messages

  • How to add Audio Track to Existing AVI File

    Dear Friends,
    I have a AVI file, which contains only the Video Track.
    Now i want to add Audio track to this existing Video Track AVI File.
    Please suggest me with samples.
    Regards
    Senthil

    Try next:
    Get a datasource from the avi.
    Get a datasource from the audio track.
    Create a MergedDataSource with both.
    Use a datasink to write to a file or play it with a player...

  • Just got fcp, how do mute the sound on the video clip so it does not come through the audio track?

    just got fcp, how do mute the sound on the video clip so it does not come through the audio track?
    Please help

    Don't edit the audio into the timeline. Or pull the audio level down to zero in the inspector or on the audio waveform in the timeline.

  • How to make the audio track independent from the video track?

    Can someone remind me how to make the audio track independent from the video track? My memory just went blank. Must be the age.
    Thanks

    Hi -
    Select the clip in the timeline.
    Type Command + L or go to the menu Modify > Link to toggle it off.
    MtD

  • How do I add audio books to my shuffle

    How do I add audio books to my shuffle

    If this is a 4th (or 3rd) gen shuffle, and you use automatic syncing for loading songs...  Select the shuffle in iTunes.  There is a row of "tabs" (buttons) starting with Summary.  Click on Books there.  This is the Books tab, where you tell iTunes how to sync audiobooks to the shuffle.  Set it up as desired, and click Apply.
    NOTE:  If your shuffle is currently NOT set up for automatic syncing, its content will be replaced by content selected in the sync settings.
    If you are NOT using automatic syncing for songs, so you have been loading songs manually by dragging them to the shuffle in iTunes, then you should NOT do the above.  Instead, you can load audiobooks the same way.  Drag the books you want to the shuffle from your Books library in iTunes.
    If this is a 1st or 2nd gen shuffle, it is different.  Please post back.

  • HT204394 How do i add audio to a single slide, not using soundtrack on ipad? but having new audio for each slide, on the ipad (not mac)?

    How do i add audio to single slide on keynote, not using soundtrack so i can have new sound on each slide controlled by my click? Have ipad so cannpt drag from itunes i dont think.

    Troubleshooting Apple Mail
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • HT4059 How can I add audio to my ibook title page?

    How do I add audio to the Title page of an ebook I am creating with ibook author?

    Everytime I add an audio file to the iWeb page a "Drop Image Here" appears with the audio control. Is there a way to eliminate the box for the image?
    If you don't put a picture in the area and publish all you'll get on the published page is the controller as shown here: Embedtests.
    You do know that if a visitor click on the small downward pointing triangle at the right of the control bar you get the option to download the file, right?
    Click to view full size
    However, having a download link to a zipped file as Riddy suggested would be more apparent to those who might not know about that feature.
    OT

  • HT1349 I have registered my product, now how do I add it to my products?

    I have registered my product, but all I have on the "My Products" list is my iPhone and my MacBook is not added, how do I add it?

    Hello,
    Your bookmarks should sync automatically across your devices after pairing them on Firefox Sync. It could take a few minutes, depending on how much information you've chosen to sync.
    If your bookmarks still aren't showing up in the ''Bookmarks'' menu after a few minutes, try the following:
    1. Make sure you've checked off bookmarks in your Sync settings. See this help article for step-by-step instructions: [[How do I choose what types of information to sync on Firefox?]]
    2. Click on the orange Firefox button to open the menu. If Sync is set up correctly, you should see a "Sync Now" button as pictured. Click on it to resync your bookmarks.
    Please let us know if that worked.
    Next week, Firefox is coming out with a new, improved Firefox Sync feature. It's much easier to use - just a simple sign-in, no device codes needed.

  • How to SIMPLY add audio crossfade between two clips ?

    Tried to make a simple cut edit for tv news.
    How to add an audio crossfade between two clips to soften transition ?
    Detach audio, then create audio only scenario, then add transition ? Unusable.
    When importing 8 tracks from Xdcam HD, how do you choose wich audio track to add your transition to ?
    Also, impossible to re-export to Xdcam disk on the field.
    This piece of software is simply unusable in real life pro conditions. Some very nice features, globally a disaster.

    First thank you all for taking time to reply.
    I found these solutions myself but for me these are only workaround.
    In Fcp7, you just had to drag and drop dissolve transition to clips junctions TO AUDIO TRACK ONLY. Very quick and simple. In Fcpx, it is very time consuming if you want to add audio crossfade to every clip junction in a full project. That's really not a software evolution in my opinion...
    I think "easy transitions to audio tracks only" has to be implemented in next version.
    Thanks again !

  • How to edit both audio tracks with video that has two tracks?

    I have video that has 2 tracks with it. Both however are marked ch. 1 on the premiere timeline. The properties say they are 48000 hz audio. Now when i hilight both tracks and right click to edit in Audition, only one comes over. I am wondering a few things here. Why are they both the same channel and how can i edit both of them at once since they ae exactly the same in Audition? Do i even need both tracks?

    Well, that's another nasty problem with multicam editing in PP. It cuts only the video but not both. The audio track is always that of the first selected clip (of that in the first video track) when I create a multicam sequence. I have manually to open it in the timeline, enable or disable certain audio tracks, go back to the sequence and cut. But when I have to switch the audio for only some camera angles it is impossible, because I can only change the audio track for the whole sequence. Or do I miss something? Maybe it is another cool "design feature"?

  • How do I collapse audio tracks

    I'm in FCP X 10.1 and can't figure how to collapse the audio so the black line is remove above the track so I can do cut without getting out of sync (see right side of image). Here's what it looks like. PS what is the view called and how did it happen.

    Are you talking about this black bar?
    You can't remove that. It's the shelf that connects the secondary storyline that's created when the audio cross fade transition is applied. It connects the two pieces of audio that were separate connected clips, connected to the multicam clip on the primary storyline. It looks like you detached the multicam clip audio from the multicam clip.

  • How to combine Razored Audio Tracks?

    Hi, I just razored up a big track into chunks to move around..
    Now how exactly do I mold them together so I can export to Soundbooth to DeNoise?
    Or I guess I should have done that in the beginning huh?

    I use Craig's method, and then just Import the adjusted WAV into PrPro, placing it on a new Audio Track, even if I have to create one. Then, I just Mute the original Audio Track with the Razored Clips, or Delete them. I'll usually leave them Muted, just in case.
    Good luck,
    Hunt

  • How do I merge audio tracks in Premiere?

    So I recorded some gameplay using MSI Afterburner (x264 codec) and had it split my mic audio from the game audio as a separate audio track, to prevent the game audio from being muted whenever I talk. I used handbrake to transcode the avi to m4v, and the clip works in AE/premiere. When I load it in VLC, I can confirm that there are two audio tracks. My question is, where is the section in premiere that shows the audio tracks, and how would I merge them into one track?

    If you have a clean signal on one channel, and the other is empty, you can use the Audio Effect>Fill Left, or Fill Right, to get back to two channel. Note, this will be 2-channel mono, and not true stereo, but will sound very similar, just without the separation.
    Now, if you have one clean channel, but a problem with the other (bad Audio), I'd take the Audio portion of your File into an Audio editor, like Audacity, and strip out the bad channel, then just duplicate the good channel to replace it. That is basically what Fill-Left, etc. does, but if you have bad Audio, you will want to clean that out first.
    Good luck,
    Hunt

  • How to edit only audio tracks in multicam sequences?

    How can I cut only the audio track in a multicam sequence? I need it like in Final Cut Pro: Cut both video and audio, cut only video track x while audio track y remains untouched, cut only audio track x while video track y remains untouched. I can't find any solution. I use Premiere Pro CS6. Please don't recommend CC!

    Well, that's another nasty problem with multicam editing in PP. It cuts only the video but not both. The audio track is always that of the first selected clip (of that in the first video track) when I create a multicam sequence. I have manually to open it in the timeline, enable or disable certain audio tracks, go back to the sequence and cut. But when I have to switch the audio for only some camera angles it is impossible, because I can only change the audio track for the whole sequence. Or do I miss something? Maybe it is another cool "design feature"?

  • How do you combine audio tracks in quicktime 10.2

    Students in my class recorded some voice overs in multipe clips.  We want to combine them into one track in quicktime 10.2.  However the choice to copy the track is grayed out.  How can we combine the tracks into one in quicktime 10.2?

    Students in my class recorded some voice overs in multipe clips.  We want to combine them into one track in quicktime 10.2.  However the choice to copy the track is grayed out.  How can we combine the tracks into one in quicktime 10.2?
    You don't. Use QT 7 Pro or GarageBand instead. (Video editors will also merge multiple audio tracks but they are likely more limited than QT 7 Pro which allows up to 99 data tracks.) GarageBand, also based on older QT 7 Pro technology, allows you to segment tracks, set track or selected track segment volumes to duck track or track segments, adjust or "rubberband" master track volumes, adjust stereo pan for track or selected track segments as well as, "slide" tracks or track segments along the time axis and apply numerous enhancements beyond my ability to even remember here.

Maybe you are looking for