OpenEdge / Progress V10 & Visual C++ Runtime Error R6034

I'm trying to sequence OpenEdge V10 but I'm hitting a wall with whatever I try. I'm getting C++ Runtime error R6034 at launch.
I've tried loads, but the key is that I sequenced it on a Win7 x86 VM and converted the VM from a Sequencer into a Client and still received the error.
I started on AppV v5 SP2, but reverted to using SP1 as there's new built-in functionality concerning runtimes, that I theorised *could* be breaking this app, however SP1 still didn't work (I was running the SP1 sequence on an SP2 client).
I've also tried:
- Installing the Runtime locally prior to sequencing (I used the Runtime that was inside one of the installers for the application)
- Installing every Runtime I can find onto the Client.
Has anyone experienced this error ?
Thanks
Note: The application works successfully during sequencing and also if I install it locally, without sequencing.

Hello,
See these troubleshooting steps someone did to narrow down the issue;
http://www.keysolutions.com/blogs/kenyee.nsf/d6plinks/kkye-7c8nm8
Nicke Källén | The Knack| Twitter:
@Znackattack

Similar Messages

Itunes 9.1 for windows causes visual c++ runtime error r6034

howdy y'all,
my setup ...
os = win xp pro, sp3, current patches installed
itunes = 9.1.0.79
the original update was thru the apple software updater. after the error showed up on 1st start of itunes, i ...
= rebooted the system = no fixee
= uninstalled itunes, rebooted, reinstalled itunes, rebooted = no fixee
since i updated to 9.1 i get the following errors at itunes startup ...
[1] visual c++ runtime error r6034
after i hit ok for item [1] i get ...
[2] itunes cannot sync information ..SNIP.. because syncing has been disabled on this computer. do you want to enable syncing?
if you do not enable ..SNIP.. to your ipod.
after i hit yes for item [2] i get ...
[3] itunes was unable to load provider data from sync services. reconnect or try again later.
after i hit ok for item [3] itunes runs.
the itouch shows up in the left panel "devices" list and is selectable. pressing the sync button on the itouch summary page triggers TWO dialogs of item [1]! hitting ok on them lets the sync go forward. i presume the only actual sync going on is the music. the sync finishes with no errors and says "ipod sync is complete. ok to disconnect."
i haven't tested to get confirmation that anything is being synced so it might just be going thru the motions.
item [1] is listed on the ms site here ...
http://msdn.microsoft.com/en-us/library/ms235560%28VS.80%29.aspx
it says the error is caused by a missing "manifest" and the fix is to rebuild the app with a proper one.
links to the 3 error msg screen captures ...
http://img163.imageshack.us/i/itunes91startuperror01.png/
http://img6.imageshack.us/i/itunes91startuperror02.png/
http://img408.imageshack.us/i/itunes91startuperror03.png/
otherwise, itunes runs in its usual slothful [on windows] and crash-prone [on windows] manner.
help, please?
take care,
lee
Message was edited by: Lee Dailey
Message was edited by: Lee Dailey
Message was edited by: Lee Dailey
Message was edited by: Lee Dailey

Hi all,
I could resolve some of the issues posted here with the fix offered by jeffcoffee under http://discussions.apple.com/thread.jspa?threadID=1595916&start=285&tstart=0 (However, I still have the R6034 error message. Would be great to have a fix for that too).
This is what he did:
copy the file 'sqlite3.dll'
from 'C:\Program Files (x86)\Common Files\Apple\Apple Application Support'
to 'C:\Program Files (x86)\Common Files\Apple\Mobile Device Support'
*In a 32 bit Windows OS remove (x86) from the path.
Another potential dll issue might be: 'libxml2.dll', follow the same copy routine. If the first one does not fix it.

The latest update has resulted in a runtime error (R6034) and I keep being told Microsoft Visual C Runtime Library is being accessed incorrectly. Anyone know how to overcome the problem? I am using a Dell Inspiron 9400 running Vista.

The latest update to itunes has resulted in a whole series of runtime errors (R6034). Microsoft Visual C++ Runtime Library states it is being accessed incorrectly. I am also told that Apple Mobile Device Failed to Start. Additional messages suggest the error is in itunes.exe and ituneshelper.exe. I also get Error 7 (Windows error 1114). Anyone got any ideas how to overcome this (these) problems?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99527)

I tried downloading the new update for itunes I get these error messages: Visual C runtime library R6034 an application has made an attempt to load the C runtime library incorrectly Error 7 windows error 1114. What should I do to correct this?

I tried downloading the new update for my desktop PC I get the following error messages:
Visual C++ Runtime library
R6034
an application has made an attempt to load the C runtime library incorrectly Error 7 Windows Error 1114

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99907)

I have a runtime error R6034 when i try to log in to itunes so i unistalled itunes prog from my pc and tried to download itunes prog again but no luck still keep getting this error

I am having major problem. a while ago i downloaded a programm from the internet and there was an error so i uninstalled as i was unable to use it. Since this application, Everytime i log on i get dialogue box opens up Microsoft visual runtime library, Runtime Error R6034. An application has been made an attempt to load the C runtime library incorrectly.please contact the application support team for more info.and every time i tried to open itunes on my desktop i receive this message.So i have just unistalled itunes logged on to apple to try and download the itunes prog ,but it dont seem to have downloaded.can anyone help me please.

So i have just unistalled itunes logged on to apple to try and download the itunes prog ,but it dont seem to have downloaded.can anyone help me please.
Could you walk us through what happened when you tried to do the download, please?

Windows client gives runtime error R6034 with TMMONITOR=app,svc,tran,sys::

PLEASE REFER TO THE DUPLICATE POSTING IN THE "TUXEDO" FORUM FOR AN ANSWER TO THIS QUESTION.
Hi,
I'm testing TSAM on a Windows system. If I run without setting the TMMONITOR environmental variable set everything works fine, but when I set TMMONITOR=app,svc,tran,sys:: both the client and server programs give the runtime error R6034: "An application has made an attempt to load the C runtime library incorrectly". Clicking the "OK" button lets the programs continue, but the following messages appear in the ULOG:
142539.868.TUXMODEL!tuxmodelclient.5996.5860.0: GP_CAT:1345: ERROR: pif: can't load 'libmonplugin.dll'
142539.868.TUXMODEL!tuxmodelclient.5996.5860.0: GP_CAT:1341: ERROR: pif: can't load impl 'bea/performance/mongui' that is in InterceptorSequence for 'bea/performance/monfan'
142539.868.TUXMODEL!tuxmodelclient.5996.5860.0: LIBTUX_CAT:6623: ERROR: TMMONITOR failed to invoke the monitoring plug-in
142547.342.TUXMODEL!TuxModelServer.3220.728.0: GP_CAT:1345: ERROR: pif: can't load 'libmonplugin.dll'
142547.342.TUXMODEL!TuxModelServer.3220.728.0: GP_CAT:1341: ERROR: pif: can't load impl 'bea/performance/mongui' that is in InterceptorSequence for 'bea/performance/monfan'
142547.342.TUXMODEL!TuxModelServer.3220.728.0: LIBTUX_CAT:6623: ERROR: TMMONITOR failed to invoke the monitoring plug-in
142547.482.TUXMODEL!TuxModelServer.3220.728.0: LIBTUX_CAT:6623: ERROR: TMMONITOR failed to invoke the monitoring plug-in
142547.498.TUXMODEL!TuxModelServer.3220.728.0: LIBTUX_CAT:6623: ERROR: TMMONITOR failed to invoke the monitoring plug-in
142547.498.TUXMODEL!tuxmodelclient.5996.5860.0: LIBTUX_CAT:6623: ERROR: TMMONITOR failed to invoke the monitoring plug-in
Can anyone tell me what I need to do to overcome this problem? (I'm running Tuxedo Version 10.0 with VS2005, 32-bit, Patch Level (none) and TSAM version 1.1. Both programs were compiled with buildclient/buildserver, using Microsoft Visual C++ Express Edition 2008 (Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 15.00.30729.01 for 80x86)
Thanks & kind regards,
Malcolm.
Edited by: Malcolm Freeman on Oct 28, 2008 11:55 AM

As I know, the runtime rrror R6034 can be caused by Windows, not caused by TSAM, you need check your Windows system.
guggi

Reader X crashes after launching with Visual C++ Runtime Error on Win7

Reader X (10.1.2) just crashes shortly after launching. An error message box appears saying "Visual C++ Runtime Error". Not able to view any document! Please see the attached image for details.

Could you please try the following and see if they help resolve the issue:
1. Are you performing any specific operation which causes this error on your system? Or does it happen even if you just launch the application (without opening any PDF)?
2. Please let me know the Antivirus software installed on your system.
Try and temporarily disable the antivirus on your system and launch Adobe Reader. Does it still crash?
3. How did you update to Reader 10.1.2? Was it via the updater mechanism? Or was it done by downloading the installer from the adobe website?
If it was done via the updater (ARM) mechanism, could you let me know, if you launched Reader whilst the installation was in progress?
4. Could you try and repair the installation from within the Control Panel > Programs and Features.
Thanks
Ankit

After Upgrade to latest iTunes, it will not open.Uninstall and reinstall did not help Getting this error message '' Runtime Error R6034 '' An application has made an attempt to load the C runtime library incorrectly''. 3 windows PCs.1 vista, 2 windows7 7

I upgraded to the latest iTunes 11.1.4, after a prompt from the iTunes store. But will not open after the upgrade. One of three error messages told me to reinstall. I did. Restarted and scanned. But no help there. So I unistalled and re installed from Apples' website. The installation was okay as usual but still will not open. Keep getting the same error messages. '' Runtime Error R6034, '' '' An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.'' That's the error messages I get when I try to open the New installed iTunes 11.1.4. Right now there is no iTunes on any of my PCs. Installed but will not open. Please Help.Thanks.
Jonas.
3 Windows PCs. Safari 5.1.5 ( One Laptop with Vista. Two Windows 7 64 bit on All in One Sony desktop PCs. )

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

ITunes update shows runtime error R6034/iTunes error 7/Windows error 1114. iTunes tells me to reinstall but I've uninstalled/restalled and get same error messages.

After iTunes update I see this - Runtime error R6034 "application has made an attempt to load the C runtime library incorrectly". ThenUninstalled then I also get iTunes was not installed correctly. Please reinstall iTunes error 7 (Windows error 1114). I've tried fixes for runtime but computer says there are no errors. I've uninstalled/reinstalled iTunes and get all the above messages. Now when I start up my computer the runtime error pops up, but once it is closed computer works fine until I try to open iTunes. I've even tried a system restore going back to November. I use iTunes for audiobooks on iPod and I'm going to get desperate soon. Any suggestion?

Follow the instructions of tt2 in: https://discussions.apple.com/thread/5822086

I am running Windows Vista 64 bit and i get a runtime error R6034. How can i fix this and get itunes to work?

I am running Windows Vista 64 bit and i get a runtime error R6034 when i was updating itunes. How can i update itunes with out getting this error?

* Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History"
App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore

I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly."

I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly." When I then tried to run iTunes (assuming that, since the new install failed, my older version was still OK) I got the message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114". I tried then uninstalling iTunes and reinstalling it fresh, but encountered the same problems. Help!

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

TS2363 Why do I get a runtime error R6034 message when installing iTunes 11.1.4.62 on my WIn XP (SP3) system?

iTunes prompted me to download and install the newest version of iTunes (11.1.4.62). I followed all on-screen prompts. iTunes installation gets to the very end, then I get a popup stating that I have a Runtime Error # R6034 "an application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information. Okay, I am doing that. FYI, I am runnning Windows XP (SP3). Oh, and BTW, now iTunes is COMPLELETY unusable, and I cannot synch any of my multiple iOS devices. Help please!

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

Pls help me get itunes back on my computer. runtime error R6034 and error 7 windows error 1114

when i updated my itunes i got an error that it couldnt install it and to do it manually which didnt work either so i tried the uninstall and reinstall but i keep getting a runtime error R6034 and error 7 windows error 1114 and it wasnt installed correctly. pls help so i can get itunes back on my computer. i use windows vista. thanks so much in advance.

Hi shannonvc,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden

TS5376 I have a laptop that i am running with Windows Vista. A while ago, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.

I have an iMac as my home computer, upgraded to this about a year ago from a windows pc and love it.
However...
I have a HP Compaq laptop that i am running with Windows Vista, which I use when travelling. A while ago, I believe on an update, to either windows or itunes, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.
I have a reasonable amount of tunes stored on my laptop, and am unable to ascertain as to whether this fix for allowing itunes to work again will delete my music folder and lose all the tunes i have on my laptop already?
The contents of my music folders on my laptop and iMac are not the same, as they are not synced!
Any help please on this would be appreciated!
Pete

See Troubleshooting issues with iTunes for Windows updates. The second box covers the basic removal and repair steps. The rest is links to other useful resouces.
tt2

TS3212 I tried to update my iTunes, but I keep getting a runtime error R6034 Attempt to run C runtime library incorrectly. I also got an Error 7 (Windows error 1114)

I tried to update my iTunes, but I keep getting a runtime error R6034 attempt to run C runtime library incorrectly. I also got an Error 7 (Windows error 1114). Now my currently iTunes will not open.

Hey twhitten!
Here is an article that will help you troubleshoot this issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

OpenEdge / Progress V10 & Visual C++ Runtime Error R6034

Similar Messages

Maybe you are looking for