Openfiler does not detect NIC cards

Hi,
During installation of Openfiler on a Dell T410 with two network cards, the install didn't prompt for network configuration as per the following article.
http://www.oracle.com/technetwork/articles/hunter-rac10gr2-iscsi-101317.html
Any help please.
Thanks
A/A

asgar_amin wrote:
During installation of Openfiler on a Dell T410 with two network cards, the install didn't prompt for network configuration as per the following article.A year old article - a very long time in the rapid evolving life cycle of Open Source software. Which means the article may only be correct for the exact versions of the kernel and s/w installed as mentioned in the article.
Is there an alternative to openfiler that I can use? To be honest - you need to rethink your attitude if a simple issue like this, s/w not behaving as a year old article stated, is a show stopper.
Have you bothered to look at the OpenFiler documentation? There are installation and configuration guides. Have you confirmed that your platform's NICs are working?
Very likely the problem at hand is due to ignorance. And unless you can discard that, proclaim yourself knowledgeable about OpenFiler, you should not consider binning a s/w product because of your inability to configure it.

Similar Messages

Lumia 625 does not detect MicroSD cards, please he...

My Lumia 625 does not detect MicroSD cards when inserted.
I have tried powering off/on.
I have tried formating them in my PC.
I have updated my phone to 3050.0000.1334.0007
I have tried a Kingston 64GB SDXC Class10
I have tried a Sandisk Ultra 64GB SDXC Class10
I have tried formatting the cards in various ways including exFAT / FAT32 / FAT64 etc.
The only progress i made was when i tried formatting in NTSC and after inserting the card i recieved a message saying "incomattable formatted card inserted, do you whish to format the card in a compattable format?" After choosing yes, the phone formatted the card and then the card was undetected...
This was confirmed by checking the card in my PC, which confirmed that the card had been formatted using exFAT, which i believe is the correct format for the phone/card.
Clearly the phone is somehow detecting and writing to the card and the card is functioning properly, except that the phone does not detect that the card exists as expanded memory and will not allow me to use it.
Any help with this would be really appreciated!
Becoming quite frustrated now...

Hi Pepperami33,
Have you tried to perform a reset? It will delete all your data so backup is required. See this link: http://www.windowsphone.com/en-us/how-to/wp8/basics/back-up-my-stuff for the steps on how to backup your files. After creating a backup, go to Settings > About > Reset your phone.
If the reset will not work, it is best to have your phone checked by our care point. Visit www.nokia.com/support for more info about the repair process.

Aperture does not detect CF Card

I am using Aperture 2 with my Canon EOS 30D. I used 2GB Sandisk CF cards and have had no issues ever. Recently I bought a 4GB and 16GB CF card and for some reason Aperture/Mac does not detect these cards. When I connect my camera via USB to my macbook, and click import, it does not show my Canon as a drive available to choose pics from. With my 2GB card it does.
Any ideas?

Does the card show up in the Finder? I suspect this isn't an Aperture issue.

Ricoh PCIe SDXC/MMC Host Controller does not detect SD cards

Hi,
My Lenovo Thinkpad X230 has an integrated 4-in-1 SD card reader (SD/SDHC/SDXCMMC), but it does not detect any card I insert. The two cards I have are working correctly under my sister's MacBook. My kernel version is 3.6.10. Here's the output of a few commands :
lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Lenovo Device 21fa
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: Lenovo Device 21fa
Kernel driver in use: i915
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: mei
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
Subsystem: Lenovo Device 21f3
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: i801_smbus
02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)
Subsystem: Lenovo Device 21fa
Kernel driver in use: sdhci-pci
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Device 8195
Kernel driver in use: rtl8192ce
lsmod | grep sd
sd_mod 29560 4
scsi_mod 133434 2 libata,sd_mod
sdhci_pci 10834 0
sdhci 23695 1 sdhci_pci
mmc_core 82791 2 sdhci,sdhci_pci
Nothing new happens if I type dmesg | tail after inserting a card.
I didn't find any solution after searching on Google, but it seems there are a few other people experiencing the same problem as me. I haven't actively tried anything yet.
I don't have much experience when it gets to this kind of things, so I hope there are some of you who can help me.
Thank you!
Last edited by Fayden (2012-12-22 05:13:09)

In case someone else has the same problem, there's actually a package in the AUR that fixes the problem : https://aur.archlinux.org/packages/ricoh-e823-fix/
Install it and enables it with systemd and it should work correctly!

Msi x99 gaming 9 ack does not detect capture card when using with xsplit

msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.

Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth...

Photoshop CS5 64-bit does not detect Video Card

I just updated from CS4 to CS5. I have a core i7 with an ATI HD 5700 series graphics card with the most recent driver 10.9. Photoshop is also updated to 12.0.1. For some reason, only the 64-bit version does not detect the graphics card. Photoshop CS4 64-bit and Photoshop CS5 32-bit see the graphics card fine. I noticed a few others have had the same issues. Has this problem been addressed yet? If not, is there a workaround?

It's a recently-reported issue with Catalyst 10.9 on the Radeon 57xx.
See this thread: http://forums.adobe.com/message/3184458
-Noel

Re: msi x99 gaming 9 ack does not detect capture card when using with xsplit

I concur with all of badboy2k's thoughts. He puts forth a very good explanation, and it makes sense.
I'd get the power supply out and get a good branded power supply (Seasonic is my preference at this time)....

I have a MSI z87-GD65 and I cannot get the computer to reboot.
I am on a fresh windows 7 install.
Specs
i5 4690k
EVGA GTX 670
EVGA 750w
G skill 2x8gb 2400
samsung 250gb ssd
Did:
Latest bios update from msi
CMOS reset
Latest Intel ME driver from msi

Hello everyone, I just updated my 3GS from iOS 5.0.0 to 5.0.1 Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network. I tried restarting the phone se

Hello everyone,
I just updated my 3GS from iOS 5.0.0 to 5.0.1
Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.

You do not need to keep posting the same thing over and over again.
Look to the right side of this page at "more Like this" or do a forum search.

Win XP does not detect onboard ethernet card

Hi,
i have bought a used T41 (2373-tg5) and installed XP Pro SP3.
I have installed all the drivers and everything is working fine. The only problem i have, is the fact, that XP does not detect my onboard 10/100/1000 Ethernet LAN card. It does not show up in the device manager and manually searching for new hardware is to no use.
I have also looked at the BIOS config, the onboard ethernet card is listed as being "enabled". I am sure, there was a device marked with a yellow exclamation mark in the device manager named "ethernet adapter" once. I am not sure, wether this was the WLAN card, i have successfully installed a driver for...it is completely gone now though...
Is this some weird XP thing? I thought, i had read something like this once, but cannot remember.

cnhoff, wilkommen im Forum,
when you enter BIOS the MAC address of the internal LAN card should be shown at the bottom, is it showing a number or is it all zeros? All zeros means that there is no LAN installed which would mean in your case a new mainboard or using a pcmcia LAN card.
Grüße
edit: Typo
Message Edited by andyP on 08-13-2008 07:10 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Photo Downloader does not detect Thunderbolt connection. Help!

I am using Bridge CS5.1 on MacBook OSX 10.8.3. I bought a Seagate Thunderbolt Adapter which works with 2.5" eSATA hard drives (Seagate Backup Plus). Instead of connecting a 2.5" eSATA to this Thunderbolt Adapter to my Mac, I am doubling this thunderbolt connection as a CF card reader by swapping the eSATA portable drive with a CF to eSATA Adapter instead. Photo Downloader does not detect anything connected through thunderbolt!?
When the CF card or portable drive is connected via the TB adapter, it appears in Bridge and Finder. The Canon's Image Browser (Memory Card Utility) detects only the CF card (not the portable drive) as a Camera and downloads the images from the CF card via the thunderbolt adapter with no issues. I would prefer Bridge to download the images due how the folder names are created by Bridge. (I have been using Bridge for few years now and dont want to change the naming convention. Can't seem to find a way for Canon to name it exactly the same as Bridge. It does YYYY_MM_DD amd I cant get rid of the underscores in Canon's software)
How can I get Photo Downloader (File: Get Photos from Camera...) on Bridge CS5.1 to detect the Thunderbolt connection as a Camera?
Excuse my messy desk, here's a pic of the set up with the CF card plugged into the CF to eSATA adapter : and onto the Seagate TB Adapter. and the TB cable goes into the Mac

It works perfectly well. My issue is getting Adobe Bridge 5.1 to recognise the CF card via thunderbolt in photo downloader.
Despite having bought a MacPro just a few months ago I still have no Thunderbolt connection so i can't confirm this.
I do know Photodownloader has not changed a bit since it was presented long time ago and definitively needs a lot of improvement.
It is very possible that Photodownloader is not capable detecting thunderbolt connections and Canon software doing so does almost proof APDL does not do so.
You can try to dive in the user library (by default hidden, use menu Go and press option to reveal it) and in the folder preferences find and delete the Photodownloader plist file manual.
restart photodownloader and try again.
The other option is to use a USB 3.0 or Firewire (both also pretty fast).
The third option is to use Bridge itself for renaming the files you imported manual. Using the sort order creation date and batch rename use the option for shot date (yymmdd-number or other info) and either organize with stacks or create folders.
There is also a nice app (not free but cheap called 'big mean folder machine" from the same team that offers 'A better finder rename'.
Both offer plenty of options that makes life easier, such as producing folders with specific naming and order in no time

Solution who encounter 'Setup does not detect Sound Blaster .....' error msg during installat

For those who encounter 'Setup does not detect sound blaster audio in the system' error upon installing from the installation CD. You can try the steps below that work for me. It seems Windows have lock on to the sound card with an incorrect ID thus the installation CD are not able to correctly identify the card. Be sure to do a backup copy of the registry first incase something goes wrong since we are editing the registry.
. Go to Start-Run and type in 'regedit' to start the registry editor application.
2. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\P CI.
3. You should see listing with 'VEN....'. Expand them by clicking on the + icon and then see if it's listed as unknown or Creative related stuff. Keep note of them.
4. Right click on those 'VEN......' listing that you have noted earlier and select full permission. Ensure that full control are selected. Now delete all those listed as unknown or Creative related stuff.
5. Exit registry editor and reboot. Try using the installation CD again.
Hope it hel
ps.
Message Edited by BadBoy on 05-22-2005 09:5 PM

I only have this problem when i try to install <A href="]Li'veDrvUni-Pack(ENG).exe[/url] ... That driver pack also says that the drivers from cd are the newest ... :S !

Got an (unlocked) iphone 4s from US and tried activating in India but it throws an error saying 'unable to activate bcos the activation server cannot be reached' ..I tried connecting to itunes through my laptop but it does not detect my iphone..pls help

Got an (unlocked) iphone 4s from US and tried activating in India but it throws an error saying 'unable to activate bcos the activation server cannot be reached' ..I tried connecting to itunes through my laptop but it does not detect my iphone..pls help

mithaani wrote:
Got an (unlocked) iphone 4s from US
As kb1951 states, unless this phone was purchased directly from Apple, it is not officially unlocked. In the US, only Apple sells officially unlocked iPhones. The message you got generally means your phone was hacked to unlock it...jailbroken...Apple's servers have detected such & are preventing your phone from activating...there's nothing wrong with the activation servers.
You'll need a sim card from the carrier your phone is locked to in order to activate it. If you don't know what carrier, you'll have to call AppleCare in the US to determine this info. Be aware, US carriers will not authorize official unlocking unless you are a customer that used the phone on their network. Thus, there is most likely no way for you to get this phone officially unlocked.
Good luck.

Wi-Fi does not detect on Satellite L40-139

Hello!
I have a problem with Wi-Fi connection on Toshiba L40-139 under Windows XP Professional
I have all drivers for this model from this site.
Also Intel PRO/Wireless 2915ABG: 9.0.4.39 adapter was installed.
But during the installation there was an error "Couldn't install driver".
Wi-fi card does not detect by device manager
When I try connect to Wi-Fi network I have a message that there isn't any Wi-Fi devices on my notebook.
Help, please!

Hi
As Im not mistaken the L40-139 PSL40E supports the Atheros 802.11g WLan card.
And therefore you should use and install the Atheros Wlan card driver!!!
Additionally you should perform a BIOS update.
According to some postings here in the forum, the BIOS update helps to solve some WLan issues.
Check it out & good luck
Bye

[SOLVED] k3b does not detect optical drive

Hello,
I am running Arch Linux x86_64 with recent updates. I have k3b 2.0.3 and when I launch it I get message that it does not detect my optical drive, and I need hal daemon. I checked, udev is running, node in dev /dev/sr0 has root.optical, my user is in optical group. How do I fix this? I want to burn BluRay disk, maybe k3b even does not support it? And is there a better tool for optical discs than k3b? I use KDE 4 so Qt tool would be nice
Last edited by adomas (2015-01-09 17:34:05)

[EDIT] I think problem is solved. Not sure how, but after reboot it works now
Thank you for you reply, Lone_Wolf
Permissions seems to be ok:
[adomas@voidbox ~]$ ls -l /dev/sr0
brw-rw---- 1 root optical 11, 0 Jan 9 21:18 /dev/sr0
[adomas@voidbox ~]$
And about dependencies I think I have what I need:
[root@voidbox adomas]# pacman -Qi k3b
Name : k3b
Version : 1:2.0.3a-1
Description : Feature-rich and easy to handle CD burning application
Architecture : x86_64
URL : http://sourceforge.net/projects/k3b/
Licenses : GPL
Groups : None
Provides : None
Depends On : kdebase-runtime libkcddb libsamplerate libmad ffmpeg taglib libmpcdec libdvdread cdrkit
libxft
Optional Deps : dvd+rw-tools: for dvd burning support [installed]
vcdimager: for vcd burning support
transcode: for advanced mpeg conversion support
emovix: for bootable multimedia cd/dvd support
cdrdao: for disk-at-once (DAO) mode support [installed]
cdparanoia: for cd ripping support
Required By : None
Optional For : None
Conflicts With : None
Replaces : None
Installed Size : 33.81 MiB
Packager : Eric Belanger <[email protected]>
Build Date : Thu 06 Nov 2014 05:21:31 AM EET
Install Date : Wed 07 Jan 2015 07:28:57 PM EET
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature
[root@voidbox adomas]#
What else can be a problem? By the way may optical drive is external, connected via USB, if it makes any difference.
Last edited by adomas (2015-01-09 17:33:50)

AirPort does not detect networks, unless another network connection is made

I've just done a clean install of OS 10.5 to see if this problem was software related, but it persists.
AirPort does not detect any network the computer is near (tested in various locations) normally, but when connecting to a network via Ethernet or to another Mac via Firewire to use network sharing, it can update and load web pages as normal. A strange quirk I've noticed though, whenever connecting with ethernet or firewire, AirPort will suddenly detect the network! It still can't quite connect to WiFi properly though. While still connected through firewire or ethernet, it will have no connectivity through a self-assigned IP. If it is disconnected from ethernet and firewire again, the wireless network will still show up in a re-scan for networks but it will fail to connect.
I've opened the computer up to ensure that the airport extreme card is seated properly as well, and that the antenna cable is secured properly.
Any ideas as to what the issue is? Should I look into replacing the AirPort Extreme card?

Got no answer on my original post, so I went ahead with ordering a replacement AirPort card on eBay (item #130487488014). Once installed, the iMac was able to detect and connect to networks normally... but was still unable to load any web pages. I tried on secured and unsecured networks as I did previously, and plugging directly into the router and into my Macbook Pro via firewire, with the same results as before. Safari loads pages when connected with an ethernet or firewire cable, but will not load pages on WiFi alone. I can attempt to access a router setup page via WiFi, and am prompted for a username/password, but the page itself never manages to load.
Any clues as to what may be going on here?!

Openfiler does not detect NIC cards

Similar Messages

Maybe you are looking for