OpenG Package Builder tool 0.1-alpha6 released

Hello Everyone,
There is a new version of the OpenG Package
Builder tool (ogrsc_package_builder package) available. This tool
allows you to create package files that can be installed using VI Package Manager.
This release resolves an issue caused by a LabVIEW 8.x bug with handling variant coercion (see here for bug details).
See here for more info about this release.
You can download and install this library (as well as all the OpenG libraries) using VI Package Manager.
Thank you,
Message Edited by Jim Kring on 03-04-2007 10:58 PM
Attachments:
package_builder.png ‏28 KB

Bob Y. wrote:
OK,  but what is it and why should I use it?  What need does it fulfill?  I have been unable to find much documentation for this at the wiki page and maybe a couple of paragraphs here would help.
Thanks,
Bob Young
Hi Bob,
Yes, this info got burried.  Basically, it's a tool for building LabVIEW-based software products.  It is highly flexible/extensible and tries to fill the holes left by LabVIEW's built-in Application Builder.  Here are some good links to more info:
OpenG Builder Homepage
OpenG Builder 1.0 Documentation
Thanks,
-Jim

Similar Messages

  • OpenG Package Builder Release 0.1-alpha, Build packages for OpenG Commander

    You can finally build Your own OpenG Commander packages (.ogp files) using the intuitive user interface of the OpenG Package Builder.
    Read more about it, here.

    Bob Y. wrote:
    OK,  but what is it and why should I use it?  What need does it fulfill?  I have been unable to find much documentation for this at the wiki page and maybe a couple of paragraphs here would help.
    Thanks,
    Bob Young
    Hi Bob,
    Yes, this info got burried.  Basically, it's a tool for building LabVIEW-based software products.  It is highly flexible/extensible and tries to fill the holes left by LabVIEW's built-in Application Builder.  Here are some good links to more info:
    OpenG Builder Homepage
    OpenG Builder 1.0 Documentation
    Thanks,
    -Jim

  • Build tools language resources - amd64 "packages missing" Installation stuck

    I am installing the VS2015 Enterprise RC, the first installation went well, but after the second one, the installation pauses asking, package missing, download from internet or search in this address? I chose the internet one, and the installation has
    never advanced ever since, the package that is missing is "build tools language resources - amd64", and it is still acquiring this package.
    Tao Wang

    Hi ,
    Export location provided is not correct , make sure files exist as per  requirement.
    Import directory 'C:\Documents and Settings\belis\My Documents\NW7.02\NWASABAPTRIAL70206\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP1' does not exist;
    Import directory 'C:\Documents and Settings\belis\My Documents\NW7.02\NWASABAPTRIAL70206\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP2' does not exist;
    Import directory 'C:\Documents and Settings\belis\My Documents\NW7.02\NWASABAPTRIAL70206\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP3' does not exist.
    Regards,

  • Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise

    Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise 
    Standalone installer available here
    http://www.microsoft.com/en-us/download/details.aspx?id=28972
    fails with error code 0x80004005
    Is this because my installation has issues, or would the admin pack files be updated for RTM?
    Thank you in advance for any insight

    Found the solution here:
    http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
    Workaround:
    Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
    Extract the .msu file with a tool such as 7-Zip.
    Open an Admin command prompt and change directory to where you extracted the .msu.
    Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
    Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
    Use the tools as per usual.

  • Shape Builder tool not working on shapes in a clipping mask

    Hello again,
    Why is the Shape Builder Tool don't work on shapes inside a Clipping Mask? The Pathfinder does work but for the Shape Builder Tool: NADA!
    Thank's for answering,
    Lindberg

    Hi,
    Thank you for answering. No it will work correctly. The Pathfinder work inside a clipping path and in any situation but not the Shape Builder Tool. Unless this is normal, I think that the specialist at Adobe should have a look at this annoying behavior and try to release an upgrade with this behavior corrected in a near futur.
    Thank’s again for answering,
    Robert Marchand
    [email protected] <mailto:[email protected]>
    Le 8 avr. 2015 à 10:41AM, Larry G. Schneider <[email protected]> a écrit :
    Shape Builder tool not working on shapes in a clipping mask
    created by Larry G. Schneider <https://forums.adobe.com/people/LarryG.Schneider> in Illustrator - View the full discussion <https://forums.adobe.com/message/7418340#7418340>
    If you release the Clipping Mask and try the Shape Builder tool then, does it still balk at making the shape?
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7418340#7418340 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7418340#7418340
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • Help needed for ISA Build Tool

    Hi All,
    Can you give some references from where i can download and install ISA Build tool. Please pass on any step step guide for enhancing standard SAP features.
    Thanks,
    Uday.

    > Hi All,
    >
    > Can you give some references from where i can
    > download and install ISA Build tool. Please pass on
    > any step step guide for enhancing standard SAP
    > features.
    >
    > Thanks,
    > Uday.
    Hi Uday,
    If you go to service.sap.com/crm and then go through the documents available for CRM 4.0 or 5.0 you should be able to find the extension and development guide and also the ISA build tool documentation.
    Gareth.

  • IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

    iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

    There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
    Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

  • How to develop GUI/Form builder tool...?

    Hi,
    I am newbie to SWINGS. i've been a middle tier and backend developer in java.
    In one of my project i need to develop one GUI builder tool.
    Basically it contains menubar, palette to contain few components such as rectangle, table etc, and a space where we can design a gui by
    selecting the components from the palette.
    How can i start with this...?
    plz hlp me out....
    Thanks & Regards,
    Chandrakanth

    hi
    as you see i have post the same topic so if you know any
    information how to do such thing please inform me

  • Folio Builder tool palette: Cannot sign in.

    Help Please???
    In Indesign CS and CC:  When I select 'Sign In' in the Folio Builder tool palette, the App manager will launch then I sign in with my credentials.  Then app manager simply quits.  tried this many times with same result in CS and CC.  Have also tried this and it corrupted my InDesing (meaning InDesigned prompted a window that the InDesign application has been dammaged):  Deleted the following file... /Users/{username}/Library/Application Support/Adobe/OOBE and then restart Indesign?
    Thanks, RW

    Moved to DPS forum

  • UVision Build Tools Error

    I consistently receive the following error message when trying to compile LVE:
    "Failed to Script uVision Build Tools"
    Once I receive the error, I will get it every time until I quit LV and restart.
    Bill F

    Hi tim tu,
    What version of LabVIEW for ARM are you using? Is it in evaluation mode or has it been activated? Can you compile a example program? How big is the program you're trying to build?
    Check out these articles for more information:
    What is the size of my ARM program?
    Activating Keil uVision
    Evaluation Kit
    Regards,
    Product Support Engineer
    National Instruments

  • Problem in accessing integration builder tool of XI

    Hi
    i am having problem in accessing integration builder tool of XI system , when i enter the user credentials  it is getting hanged
    can any body please help me with this
    thanks and regards
    Pendyala

    Hi,
    check whether your xi server is working fine or is it down. If you are not able to open the integration builder, what is the exact error message you are getting.
    How are you trying to open your IB.
    Are you able to login to SAPGUI for the XI client.
    If so try to provide the tcode sxmb_ifr and check whether you are able to open the IB.
    Reward points
    Regards,
    Nithiyanandam

  • Can't use Shape Builder Tool - getting circle with line through it.

    I can't find any setting or anything I can change to make the Shape Builder Tool work. Using latest version.

    Without more info, it can only be a guess, but be aware that the tool only works on selected objects. PRE-selected, that is.

  • What features do you need in a LabVIEW build tool?

    When developing LabVIEW applications, libraries, and components often ones needs many more features than the Application Builder provides. For example:
    * excluding certain directories from the build
    * defining custom destinations for specific source directories
    * optionally convert destination folders to LLBs (or EXEs)
    * adding a Namespace suffix so that all VIs in the built application have globally unique names.
    I have created a tool called the Development Environment Application Builder that addresses many of these problems. I am looking for feedback and suggestions from other LabVIEW developers. I want to
    know what features you need in a LabVIEW build tool.
    I have started a discussion for this topic here.
    You can get more info and download this project here.

    All you can do is turn off the phone.  SMS text messages are sent on the same network as voice calls - there is no way around that.  You cannot change how they are routed.
    iMessgae, will use a wifi connection, when available, but otherwise your text messages will be sent and received over the cellular network.

  • Regarding accesing integration builder tool for java proxy generation

    Hi Abapers,
        How can I access integration builder tool to generate java proxy via SAP XI server in my ECC 5.0?
        Please give me the clear idea of that.
    regards
    Subash

    Hi Marinel,
    The support for XSD import is limited on 10.1.2. If you can, you should consider moving to the 10.1.3 preview as the support for document style web services has improved. The other option will be to inline the schema in your WSDL.
    Eric.

  • Illustrator Shape Builder Tool:  After the latest CC update, the tool alters shapes once edited instead of just removing/adding the desired shape.  Anyone else run into this and/or have any fixes?

    I am using a PC and installed the latest update of all the CC programs I use (AI, PS, AE, etc.) and within Illustrator I've noticed the Shape Builder Tool doesn't behave exactly as it did in the past. (And not in a good way.)
    Previous versions allowed me to edit/add/remove shapes from one another without issue (leaving all shape paths as they were before the editing while making the desired alterations), but the newest behavior seems to alter existing paths once shapes are merged/deleted making the tool almost non-usable. 
    Not sure if there's a check box I'm missing or what, but have done some brief research on the problem and haven't found anything helpful.  If anyone has run into this issue and/or knows a way to correct it, I would greatly appreciate it
    Thanks!

    Please show a screenshot before and after.

Maybe you are looking for