OpenGL Hardware acceleration not working?

Hey everyone, it seems I've run into a bit of a road block.
I've been using Photoshop CS4 for a while, but I just realized it had OpenGL hardware acceleration. I tried to use it, but I found I couldn't check the box to enable.
I have a Radeon X800 XT, AMD Dual Core x64, and 2gigs of RAM. (plenty of disk space to go with that.) Monitor running at 1680x1050.
On the ATI support, it lists the X800 as having OpenGL 2.0, which is the minimum requiremnt to use the Hardware acceleration.
Any possible fixes?
Thanks in advance,
-GX67
(p.s. attatched are screenshots of what it looks like.)

update photoshop to 11.0.1, upgrage to the latest video card drivers and if it still doesn't work then try using this http://www.adobe.com/support/downloads/detail.jsp?ftpID=4056

Similar Messages

Why is hardware acceleration not working?

Hi. I own an ASUS N61JV-X2 notebook PC. I am using Mozilla Firefox 4.0.1 for Microsoft Windows 7 Ultimate 64 bit. My laptop comes with two graphics cards: an Intel HD GPU and a nVIDIA GeForce GT 325M with 1 GB DDR3 VRAM GPU. It also comes with nVIDIA Optimus technology. I configured my nVIDIA Control Panel to make Mozilla Firefox utilize my nVIDIA GeForce GT 325M GPU when I launch the web browser.
Currently, it is not utilizing my nVIDIA GeForce GT 325M GPU. When I type in about:support, it lists my Intel HD Graphics as the GPU being used with both Direct2D Enabled and DirectWrited Enabled set to true and GPU Accelerated Windows showing 1/1 Direct3D 10.
This is not correct. It used to show my nVIDIA GeForce GT 325M GPU with 1 GB of VRAM.
I left a thread on the nVIDIA support forums, but no one has replied yet so I thought to contact Mozilla regarding this problem.
How do I enable Mozilla Firefox to use hardware acceleration so that it utilizes my nVIDIA GeForce GT 325M GPU again?
For the record, I did turn on use hardware acceleration when available under the Advanced tab within my Mozilla Firefox configuration settings.

I am having the same issue as wellwu with FF 4.0.1.
My computer is a Dell / Alienware MX11R3 with Nvidia GeForce GT 540m and Intel HD 3000 display adapters.
The issue does not occur with the Google Chrome browser. On Chrome the Nvidia drivers load automatically. WebGL works fine.
I am not sure how to find out if the Nvidia adapter is working on IE 9.
Anybody have any thoughts on this issue?

How can apple send out an os update that renders an important function of the software/hardware to not work? They knowingly have sent out this new os update for iPad which makes airplay nonfunctining! I need this for my business!

How can apple send out an os update that renders an important function of the software/hardware to not work? They knowingly have sent out this new os update for iPad which makes airplay nonfunctining! I need this for my business! I could understand if they didn't know, but it is all over the Internet! When I went in to have it revert back to os6 (which worked fine!) I was actually asked if I had done any research before I installed the upgrade! As if this is the consumer's fault for being dumb enough to fall for the upgrade!

That is not what I have discovered, nor what others have discovered, nor what I was told when I went the Genius Bar. I cannot remotely mirror to my MacBook Pro and it only started the day after I installed the upgrade. We tested it with an iPad that had not been upgraded, no problem.

CUDA GPU Acceleration not working on Dell 4700 K2000M

Hello,
I have a new Dell 4700 laptop that was outfitted with the NVIDIA Quadro K2000M and my CS6 Premiere Pro does not allow me to choose GPU Acceleration as the option is grayed out for new files. I searched the web and tried several things suggested such as turning OPTIMUS off in the laptop BIOS, uploading the latest drivers for the NVIDIA card and still the Premeire Pro refuses to allow hardware acceleration.
Am I missing something? I really want this to work. Please help!!
Thanks,
Charles

Cuda Hack
CS6 - minimum 1GB video ram
PC - add:
(Your card name) example: GeForce GTX 680
to this list:
C:\Program Files\Adobe\Adobe Premiere Pro CS6\cuda_supported_cards.txt
(or simply delete the cuda_supported_cards.txt file)
mac:
How To Enable GPU Cuda in Adobe CS6 for Mac
http://www.vidmuze.com/how-to-enable-gpu-cuda-in-adobe-cs6-for-mac/

Flash gpu acceleration not working

I can't get gpu acceleration to work it just uses the cpu.
I've watched numerous 1080p videos windowed & fullscreen in firefox and IE on youtube, they play fine but their only using the cpu.
The only thing that i've tested that uses gpu acceleration is windows 7 media player.
E6600 core 2 duo
8800 gts 640mb
Edit: From Adobe support page....
"The desktop player still uses software rendering for this release. Software rendering is used because drivers vary widely on the desktop, and drivers can accentuate rendering differences"
Is it only for laptops ? In the release notes of my desktop driver it says gpu acceleration support for 10.1.

Same Problem with my AMD HD 7450 w/ Catalyst 12.04.
What does "GPUDevice: not available" mean? That is listet in every post here ...
Version von Lightroom: CC 2015 [1014445]
Lizenz: Creative Cloud
Betriebssystem: Windows 7 Home Premium Edition
Version: 6.1 [7601]
Anwendungsarchitektur: x64
Systemarchitektur: x64
Anzahl logischer Prozessoren: 4
Prozessorgeschwindigkeit: 3,2 GHz
Integrierter Speicher: 16347,7 MB
Für Lightroom verfügbarer phys. Speicher: 16347,7 MB
Von Lightroom verwendeter phys. Speicher: 1340,8 MB (8,2%)
Von Lightroom verwendeter virtueller Speicher: 1367,2 MB
Cache-Speichergröße: 284,5 MB
Maximale Anzahl Threads, die Camera Raw verwendet: 4
Camera Raw SIMD-Optimierung: SSE2,AVX
DPI-Einstellung des Systems: 96 DPI
Desktop-Komposition aktiviert: Ja
Monitore/Anzeigegeräte: 1) 1680x1050
Eingabetypen: Multitouch: Nein, integrierte Toucheingabe: Nein, integrierter Stift: Nein, externe Toucheingabe: Nein, externer Stift: Nein, Tastatur: Nein
Informationen zum Grafikprozessor:
Check OpenGL support: Failed
Vendor: ATI Technologies Inc.
Version: 3.3.13283 Core Profile Context 14.501.1003.0
Renderer: AMD Radeon HD 7450
LanguageVersion: 4.40
Anwendungsordner: C:\Program Files\Adobe\Adobe Lightroom
Bibliothekspfad: Y:\LR5_Katalog\LR5_Katalog-2.lrcat
Einstellungen-Ordner: C:\Users\mmphotographie\AppData\Roaming\Adobe\Lightroom
Installierte Zusatzmodule:
1) Behance
2) Canon Tether-Zusatzmodul
3) Facebook
4) Flickr
5) HDR Efex Pro 2
6) Imagenomic Portraiture
7) Leica Tether-Zusatzmodul
8) Nikon Tether-Zusatzmodul
Config.lua-Flags: None
Adapter Nr. 1: Anbieter : 1002
    Gerät : 6779
    Subsystem : 32001682
    Version : 0
    Grafikspeicher : 1008
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Lautsprecher (Realtek High Definition Audio)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: LR5x102
Direct2DEnabled: false
GPUDevice: not available
OGLEnabled: true

[Solved]I don't know if hardware acceleration is working

I often watch movies in HD, and when using XBMC, they sometimes lag and/or get out of sync (audio/video). So recently I tried mplayer, and it seems better, but I've also looked into va-api. So I grabbed the pkgbuild for mplayer-vaapi (in community) and edited it to include pulseaudio and then built and installed it. But when trying 'mplayer -ao pulse -vo vaapi [movie] I don't really notice any difference. Htop shows cpu usage 70-90%, I thought it would be lower if it is working. My hardware is not the best though, so maybe it is? how do I know?
Here is output of mplayer:
MPlayer SVN-r32025-4.5.1 (C) 2000-2010 MPlayer Team
159 audio & 342 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing f-brothers.720p.mkv.
libavformat file format detected.
[matroska,webm @ 0x360dbc0] Estimating duration from bitrate, this may be inaccurate
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (dca), -aid 0
VIDEO: [H264] 1280x536 0bpp 24.000 fps 0.0 kbps ( 0.0 kbyte/s)
Opening video filter: [expand osd=1 aspect=16/9 round=16]
Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 1.777778, round: 16
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
[VD_FFMPEG] VA API accelerated codec.
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000)
Selected audio codec: [ffdca] afm: ffmpeg (FFmpeg DTS)
==========================================================================
AO: [pulse] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
Unsupported PixelFormat 61
[VD_FFMPEG] Trying pixfmt=1.
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
Unsupported PixelFormat 61
[VD_FFMPEG] Trying pixfmt=0.
Unsupported PixelFormat 61
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
[VD_FFMPEG] Trying pixfmt=2.
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
[VD_FFMPEG] Trying pixfmt=3.
Movie-Aspect is 2.39:1 - prescaling to correct movie aspect.
VO: [x11] 1280x720 => 1280x720 Planar YV12
[swscaler @ 0xeafc20]using unscaled yuv420p -> bgra special converter
A: 1.5 V: 1.5 A-V: -0.002 ct: 0.007 0/ 0 19% 27% 3.1% 1 0
Exiting... (Quit)
in ~/.mplayer/config I have this:
# default configuration that applies to every file
[default]
# use X11 for video output
vo=x11
va=vaapi
# use also for audio output
ao=pulse
# scale the subtitles to the 3% of the screen size
subfont-text-scale = 3
# never use font config
nofontconfig = 1
# add black borders so the movies have the same aspect ratio of the
# monitor
# for wide screen monitors
vf-add=expand=::::1:16/9:16
If I use vo=vaapi and va=vaapi, I get audio, but video is black. Mplayer seems to think it's working, though there is no video.
My system is:
Asus UL30a
Intel CULV 1,3ghz
4GB ram
Intel x4500mhd
I am running gnome with compiz enabled, and system is fully up-to-date with [testing] enabled:
testing/kernel26 2.6.35.4-1 (base)
testing/xf86-video-intel 2.12.0-2 (xorg-video-drivers)
extra/libva 1.0.4-1
extra/libdrm 2.4.21-2
So, how do I know if it's working if I can't see any difference just by my eyes?
Last edited by KlavKalashj (2010-08-29 18:08:00)

Ok, so I installed mplayer-mt-git from aur, and it's now working nicely. It's still not super smooth, but I guess that's becouse of my hardware. At least it syncs perfectly now, and I did not need to add anything to get pulse support. So thanks for the help! I'll keep my eyes open for va-api support

Video Acceleration not working

Hi,
I have a new MacMini Mid2011 server, core i7 with Intel HD Graphics 3000 384 Mb. It seems that video acceleration is not working: trying to watch a youtube video in Chrome only shows a hole (ie, I can see the window behind), and on Safari I only see a black rectangle. If I disable the Hardware Acceleration in the flash settings, I can see the video, so I firsth thought this was an issue just with flash. However, this is not the case: I can see tears when scrolling a regular page in the browser (chrome and safari), videos with QT or VLC also show tears. Also I have configured the Desktop pictures to change every 15 minutes, and every time there's a transition, it's not smooth anymore, I see a lot of artifacts (ie, flickers, white areas).
Anyone seen this issue? I think it started happening after the last update, but can't tell for sure.
I tried the following stuff:
1) Ran Apple Hardware Test (didn't find any issues).
2) Cleard NVRAM and PRAM.
3) Erased the HD and installd Lion Server from scratch.
I'd really appreciate any pointers here...

Just a note, EFI won't show up once installed because it
is firmware in the Mini itself. Java is also independent of
OSX so it will not show up.
With that aside, if you did a reinstall of Lion after the
Thunderbolt 1.1 update came out, it will already be
in the OSX download.
Something to check, if your monitor has a DVI input,
try using the adapter that came with the Mini and connect
to the monitor that way.
Another thing to try is a PRAM reset. Make sure the
monitor is on then follow this procedure:
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
As far as test software, TechTool Pro has video testing capabilities
as well as other features. That is the first that comes to mind.
Probably not a bad idea to get it anyway.

Macbook dies after 2008-005 security update: even hardware test not working

My Macbook no longer boots after installing security update 2008-005. Behaves as if HD is dead, AND as if boots from SuperDrive are broken too.
Sequence of events:
1. 10.5.4, Software Update notifies me of update.
2. I permit it. Immediately requires a reboot.
3. Go away for several hours.
4. Upon return, I notice the Leopard outer-space background.
5. Spinning beachball when I move the mouse.
6. Go away for several minutes.
7. Return. No change. Power down computer.
OK ... by now, you may be saying that it might still have been updating and I shouldn't have interrupted it.
But since then, the machine behaves not only like the disk is dead, but I can't even get a hardware test to run from DVD.
So, to continue.
8. Start machine again. Apple boot sound. Nothing on screen.
9. After a while, flashing "folder" icon with question mark.
Since then I've attempted to boot in safe mode, verbose mode, FireWire target disk mode (against a 10.4.x box), boot from original install disk, boot into hardware test mode from original install disk. None of these things worked. I've reset the PRAM.
The only diagnostic activity of all of these that has produced any different feedback is the PRAM reset (which sounded the Apple boot sound a second time). Everything else does not work. If the HD was dead, I could understand that none of the attempts to boot into FireWire target disk mode, or to boot from DVD and then expect to see the HD mount in some way, would work. But since it doesn't even boot the hardware test from the DVD, I'm really baffled. Any ideas? Thanks.

Well, my solution was to buy DiskWarrior and copy what I could (which was a lot, thankfully) to a FireWire external disk, then reinstall. DiskWarrior reports S.M.A.R.T. status OK, so I've gone with a fresh partition in Disk Utility and successfully installed 10.4 from the original DVDs.
Have also run Apple Hardware Test and had no problems, so I've decided to trust the drive in the short term.
Unfortunately, now, 10.5 upgrade disks won't finish and guess what ... a partial install of 10.5 breaks the 10.4! So, the machine has a recognizable startup disk but justs sits in a loop rebooting itself, presumably as it hits some inter-10.4/10.5 state and gives up.
Next up I tried to restore my 10.5 from a wired ethernet connection to my Time Capsule. Having never once been able to browse my backups in Time Machine under 10.5, I was somewhat surprised to find that the 10.5 Installer was happy to let me try a restore from the Time Capsule. It crunched away until it was happy that I had enough space on my new partition, and then did what seemed a pretty instantaneous restore. The Macbook reboots and ... can't see the startup disk.
Maybe my disk really is on the way out.

OpenGL Enabled, but not working (Photoshop CS4)

I have having a weird problem with Photoshop CS4. First of all, let me give off the specs.
OS: Windows 7 64 bit
Graphics Card: AMD Radeon HD 7570 (Driver Version 8.960.11.1000, with latest Catalyst Control Center)
I use Photoshop CS4 for freelance work, and one of the tools I like to use is the Rotate tool. When I first got my desktop and installed Photoshop, everything worked fine. However, recently I was forced to perform and factory restore on my desktop thanks to a virus.
Today I started working on something and when I tried using the Rotate tool, it was not working (I go that error window saying it wasn't enabled). I checked the OpenGL settings to see it was enabled. Confused, I restarted Photoshop and tried again with no luck.
This turned into a search around the internet to see just what is going on, but the only thing I could find was suggesting updating drivers for my graphics card and Adobe, which I have tried with no success. I have found out that some people were having the same trouble as me, but what makes my case odd is that it was working fine before the factory restore.
Any help would be great.

Because of ATI's plethora of version information I'm not really sure what Catalyst release your 8.960.11.1000 driver comes from, but I do know that Catalyst 12.4 has some problems working with later versions of Photoshop. Perhaps Photoshop CS4 isn't too happy with it either.
The most recent Catalyst release that was known to be good with Photoshop was 12.2 (though it shows up as 12.3 in the status display). It can be found here:
http://support.amd.com/us/gpudownload/windows/previous/Pages/radeonaiw_vista64.aspx
Downgrading drivers is a bit more tricky than upgrading them - you have to fully remove the current ones first, then install the older set.
-Noel

Hardware buffering not working on Win XP Pro

Card: Audigy 2 Platinum with latest drivers (02.09.006)
Latest DirectX 9.0c (directx_dec2006_redist.exe)
DxDiag DirectSound test passes ok, except that at the end gives:
"Your card does not support hardware buffering. Sounds will only play back from software buffers."
Tested on Win XP Pro SP2, hardware buffering worked ok.
Solution?
Thanks,
Gustavs
Sound Devices
Description: SB Audigy 2 Audio [D880]
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_02&DEV_0004&SUBSYS_00202&REV_04
Manufacturer ID:
Product ID: 00
Type: WDM
Driver Name: ctaud2k.sys
Driver Version: 5.2.000.96 (English)
Driver Attributes: Final Retail
WHQL Logo'd: n/a
Date and Size: 8//2006 5:24:22, 853376 bytes
Other Files:
Driver Provider: Creative
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 00, 200000
Static/Strm HW Mix Bufs: 0, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: All tests were successful.

Just found that the problem is probably something with RAM configuration (motherboard problem).
I have 4GB RAM, with Memory Hole disabled in bios it works ok, but then only shows ~2.2GB. I only get 2GB in Win XP Pro SP2 with Memory Hole enabled (x64 is ok, 4GB). I think this option is not working properly.
Gustavs

Cs4 - hardware rendering not working

The checkbox is LOCKED and set to software render by default!
I have updated to Bridge CS4 and now the slideshow and dinamic zoom are not working smoothly as on CS3.
How can I set the checkbox to Hardware?
Thanks,
Z
Graphic Card = Intel GMA 500 (latest drivers)
Bridge cs3 accepts render by hardware and it works smoothly!

Ok, here is some detail info of the issue:
On my netbook: CPU=1.6ghz, RAM=2Gb, VGA=Intel500, SSD@60mb/s
- Bridge cs3 = Hardware Render = impressive response time. [way beyond 30fps]
- Bridge cs3 = Software Render = <10fps
- Bridge cs4 = Hardware Render = not available
- Bridge cs4 = Software Render = 2 or maybe 3fps (!!!) Its a huge diference!
Come on Adobe, a loot of computers are/will be shipping this graphic card!
Just release a patch for us. Or think about it on cs5.
Z

3d hardware acceleration not found while playing games

the direct 3d accelaration is enabled however I am getting 3d hardware accelaration not found, I went to run->dxdiag & there is no option to enable 3d hardware accelarion, neither I can set the accelaration mode to full as the option is disabled.
Please help.its a brand new Hp pavilios g4 1117TU bought almost 20 days ago.

Hi,
Are you sure you have 3D accelaration in your machine ? Nothing in this material mentions about 3D
http://h20195.www2.hp.com/V2/GetPDF.aspx/c02847311.pdf
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My Iphone4s hardware is not working!!

I just bought an Iphone4s 2 months ago and its not working anymore. I cannot restore it (error 2001) nor turn it on. What should I do??? People told me that my iPhone had some problems with its hard ware. Is the warranty gonna cover this ??

Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

After updating to 10.10.2, my OpenGL applications do not work, and there are problems with window updates/refresh in App Store, and many applications, Google Chrome is unusable.

After performing the OS X 10.10.2 update, OpenGL applications, for example Starry Night Pro fail to run, there are numerous windows update/refresh problems (incomplete refresh, remnants of window/frame borders), and some applications, for example Google Chrome are unusable, as cursor motion in the application window causes the display to flash horizontal bars in the window.
I've tried a variety of things, including downloading the most current release of Xcode, turning on/off transparency in Accessibility, graphics switching, and a few other things, but the problem persists.
The App Store display behaves similarly. I am running a MacBook Pro.
This is the output from EtreCheck:
Problem description:
Screen/windows corruption
EtreCheck version: 2.1.8 (121)
Report generated March 11, 2015 at 10:26:15 PM CDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
    MacBook Pro - model: MacBookPro9,1
    1 2.6 GHz Intel Core i7 CPU: 4-core
    16 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 36
Video Information: ℹ️
    Intel HD Graphics 4000
    NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software: ℹ️
    OS X 10.10.2 (14C1510) - Time since boot: 23:26:45
Disk Information: ℹ️
    APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 748.96 GB (146.71 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 749.30 GB Online
    HL-DT-ST DVDRW GS31N
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple iPod
    Western Digital My Book 1 TB
        EFI (disk3s1) <not mounted> : 210 MB
        WDP1 (disk3s2) /Volumes/WDP1 : 333.40 GB (9.12 GB free)
        WDP2 (disk3s3) /Volumes/WDP2 : 333.40 GB (2.55 GB free)
        WDP3 (disk3s4) /Volumes/WDP3 : 332.79 GB (94.00 GB free)
    Western Digital My Book 1140 2 TB
        EFI (disk4s1) <not mounted> : 210 MB
        2TB_1 (disk4s2) /Volumes/2TB_1 : 666.79 GB (31.36 GB free)
        2TB_2 (disk4s3) /Volumes/2TB_2 : 666.79 GB (58.76 GB free)
        2TB_3 (disk4s4) /Volumes/2TB_3 : 666.18 GB (70.41 GB free)
    Logitech USB Receiver
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
    Logitech USB Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Anywhere
Kernel Extensions: ℹ️
        /Applications/Parallels Access.app
    [loaded]    com.parallels.virtualsound (1.0.36 36 - SDK 10.6) [Click for support]
        /Applications/Parallels Desktop.app
    [not loaded]    com.parallels.kext.hypervisor (10.1.1 28614 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.netbridge (10.1.1 28614 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.usbconnect (10.1.1 28614 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.vnic (10.1.1 28614 - SDK 10.7) [Click for support]
        /Applications/Utilities/DiskWarrior.app
    [not loaded]    com.alsoft.Preview (4.1) [Click for support]
        /Library/Extensions
    [loaded]    com.epson.driver.EPSONProjectorUDAudio (1.40 - SDK 10.6) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) [Click for support]
    [loaded]    com.Logitech.Control Center.HID Driver (3.6.0 - SDK 10.6) [Click for support]
    [loaded]    com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.6) [Click for support]
    [not loaded]    com.Ralink.driver.RT73 (1.1.6) [Click for support]
    [not loaded]    com.beceem.BeceemAppleWiMAXAdapter (5.2.56d16) [Click for support]
    [not loaded]    com.cisco.nke.ipsec (2.0.1) [Click for support]
    [not loaded]    com.devguru.driver.DIFMCDFree (1.1.0) [Click for support]
    [not loaded]    com.devguru.driver.DIFMSerial (1.1.0) [Click for support]
    [not loaded]    com.fklt.driver (1.8.0) [Click for support]
    [not loaded]    com.novatelwireless.driver.3G (2.2.8) [Click for support]
    [not loaded]    com.novatelwireless.driver.DisableAutoInstall (1.2) [Click for support]
    [not loaded]    com.prolific.driver.PL2303 (2.0.0) [Click for support]
    [not loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.39) [Click for support]
    [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) [Click for support]
    [not loaded]    com.sbig.driver.SBIGUSBEDriver (4.70) [Click for support]
    [not loaded]    com.sbig.driver.SBIGUSBLoader (4.70.2) [Click for support]
    [not loaded]    com.sierrawireless.driver.SierraDevSupport (2.0.6) [Click for support]
    [not loaded]    com.sierrawireless.driver.SierraFSCSupport (2.0.6) [Click for support]
    [not loaded]    com.tomtom.driver.UsbEthernetGadget (1.0.0d1) [Click for support]
    [not loaded]    com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) [Click for support]
    [not loaded]    org.emul.driver.EarthMate (1.0.0d1) [Click for support]
        /System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
    [not loaded]    com.novatelwireless.driver.3GData (2.2.8) [Click for support]
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
    [not loaded]    com.canon.MFManager.plist [Click for support]
    [loaded]    com.divx.dms.agent.plist [Click for support]
    [loaded]    com.divx.update.agent.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.kodak.BonjourAgent.plist [Click for support]
    [running]    com.Logitech.Control Center.Daemon.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Click for support]
    [running]    com.wacom.wacomtablet.plist [Click for support]
    [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
    [running]    com.adobe.adobeupdatedaemon.plist [Click for support]
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.autodesk.backburner_manager.plist [Click for support]
    [running]    com.autodesk.backburner_server.plist [Click for support]
    [loaded]    com.autodesk.backburner_start.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [running]    com.makerbot.conveyor.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.parallels.mobile.dispatcher.launchdaemon.plist [Click for support]
    [loaded]    com.parallels.mobile.kextloader.launchdaemon.plist [Click for support]
    [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
    [loaded]    com.kodak.KODAK AiO Firmware Updater.plist [Click for support]
    [loaded]    com.kodak.KODAK AiO Software Updater.plist [Click for support]
    [running]    com.parallels.mobile.startgui.launchagent.plist [Click for support]
    [loaded]    com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
    Google Drive    Application (/Applications/Google Drive.app)
    USB Display Agent    Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
    USB Display Agent    Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
Internet Plug-ins: ℹ️
    WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
    OVSHelper: Version: 1.1 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Google Earth Web Plug-in: Version: 6.0 [Click for support]
    SlingPlayer: Version: Unknown [Click for support]
    RealPlayer Plugin: Version: Unknown [Click for support]
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 6.0
    WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
    AdobePDFViewer: Version: 9.5.5 [Click for support]
    JavaAppletPlugin: Version: Java 8 Update 40 Check version
User internet Plug-ins: ℹ️
    fbplugin_1_0_3: Version: Unknown [Click for support]
    BrowserPlus_2.6.0: Version: 2.6.0 [Click for support]
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    fbplugin_1_0_1: Version: Unknown [Click for support]
    Picasa: Version: 1.0 [Click for support]
Safari Extensions: ℹ️
    Open in Internet Explorer
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    GoPro [Click for support]
    Growl [Click for support]
    Java [Click for support]
    Logitech Control Center [Click for support]
    MacFUSE [Click for support]
    Perian [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        Macintosh HD: Disk size: 748.96 GB Disk used: 602.25 GB
    Destinations:
        WDP3 [Local]
        Total size: 332.79 GB
        Total number of backups: 2
        Oldest backup: 2013-04-03 12:26:32 +0000
        Last backup: 2013-04-03 12:26:32 +0000
        Size of backup disk: Too small
            Backup size 332.79 GB < (Disk used 602.25 GB X 3)
        STAR_TECH_EXT [Local]
        Total size: 499.76 GB
        Total number of backups: 2
        Oldest backup: 2013-04-03 14:26:44 +0000
        Last backup: 2013-04-03 14:26:44 +0000
        Size of backup disk: Too small
            Backup size 499.76 GB < (Disk used 602.25 GB X 3)
Top Processes by CPU: ℹ️
         3%    WindowServer
         1%    Creative Cloud
         0%    firefox
         0%    fontd
         0%    AdobeUpdateDaemon
Top Processes by Memory: ℹ️
    670 MB    Safari
    567 MB    firefox
    464 MB    softwareupdated
    395 MB    mds_stores
    309 MB    WindowServer
Virtual Memory Information: ℹ️
    1.43 GB    Free RAM
    7.87 GB    Active RAM
    6.40 GB    Inactive RAM
    1.47 GB    Wired RAM
    7.30 GB    Page-ins
    205 KB    Page-outs
Diagnostics Information: ℹ️
    Mar 11, 2015, 04:04:23 PM    /Library/Logs/DiagnosticReports/ScreenSaverEngine_2015-03-11-160423_[redacted]. cpu_resource.diag [Click for details]
    Mar 11, 2015, 02:54:29 PM    /Library/Logs/DiagnosticReports/ScreenSaverEngine_2015-03-11-145429_[redacted]. cpu_resource.diag [Click for details]
    Mar 11, 2015, 10:18:18 AM    /Library/Logs/DiagnosticReports/ScreenSaverEngine_2015-03-11-101818_[redacted]. cpu_resource.diag [Click for details]
    Mar 10, 2015, 10:55:10 PM    Self test - passed
    Mar 9, 2015, 03:21:58 AM    /Library/Logs/DiagnosticReports/SubmitDiagInfo_2015-03-09-032158_[redacted].cpu _resource.diag [Click for details]

Here is the diagnostic script output:
Start time: 12:06:12 03/14/15
Revision: 1290
Model Identifier: MacBookPro9,1
System Version: OS X 10.10.2 (14C1510)
Kernel Version: Darwin 14.1.0
Time since boot: 3 days 13:11
UID: 502
Memory
    BANK 0/DIMM0
      Size: 8 GB
      Speed: 1600 MHz
      Status: OK
      Manufacturer: 0x859B
    BANK 1/DIMM0
      Size: 8 GB
      Speed: 1600 MHz
      Status: OK
      Manufacturer: 0x859B
USB
    Hub (Belkin Corporation)
    My Book 1140 (Western Digital Technologies, Inc.)
    My Book (Western Digital Technologies, Inc.)
    USB Receiver (Logitech Inc.)
    USB Receiver (Logitech Inc.)
FileVault 2: On
Activity
    CPU: user 13%, system 7%
CPU usage (%)
    plugin-container (UID 502): 100.0
    com.apple.WebKit (UID 502): 26.2
File opens (per sec)
    AdobeUpdateDaem (UID 0) => /tmp/UUID_OUT (status 60): 6
Energy (lifetime)
    WindowServer (UID 88): 7.44
    com.apple.WebKit.WebContent (UID 502): 7.22
Energy (sampled)
    plugin-container (UID 502): 99.13
    com.apple.WebKit.WebContent (UID 502): 23.60
    WindowServer (UID 88): 21.29
    com.apple.WebKit.WebContent (UID 502): 13.16
    Console (UID 502): 12.28
Memory (MB)
    kernel_task (UID 0): 1327
Font issues: 1
Listeners
    launchd: ftp
System caches/logs
    3.6 GiB: /System/Library/Caches/com.apple.coresymbolicationd/data
Diagnostic reports
    2015-02-19 com.apple.WebKit.WebContent crash
    2015-02-20 Topaz Adjust 5 crash
    2015-02-20 Topaz ReStyle crash
    2015-02-20 com.apple.WebKit.WebContent crash x2
    2015-02-21 com.apple.WebKit.WebContent crash x2
    2015-02-25 com.apple.WebKit.WebContent crash
    2015-03-04 system_profiler crash
    2015-03-07 com.apple.WebKit.WebContent crash
    2015-03-08 MPEG Streamclip hang x2
    2015-03-08 com.apple.WebKit.WebContent crash
I/O errors
    disk2s2: close: journal 0xffffff8049bb9c20, is invalid. aborting outstanding transactions 1
    disk2s2: do_jnl_io: strategy err 0x6 1
    disk2s3: close: journal 0xffffff8049bb9740, is invalid. aborting outstanding transactions 1
    disk2s3: do_jnl_io: strategy err 0x6 1
    disk2s4: close: journal 0xffffff8049bb9260, is invalid. aborting outstanding transactions 1
    disk2s4: do_jnl_io: strategy err 0x6 1
    disk3s2: do_jnl_io: strategy err 0x6 1
    disk3s3: close: journal 0xffffff8049bb95a0, is invalid. aborting outstanding transactions 1
    disk3s3: do_jnl_io: strategy err 0x6 1
    disk3s4: close: journal 0xffffff8049bb9400, is invalid. aborting outstanding transactions 1
    disk3s4: do_jnl_io: strategy err 0x6 1
    disk4s3: close: journal 0xffffff8023522c20, is invalid. aborting outstanding transactions 1
    disk4s3: do_jnl_io: strategy err 0x6 1
Volumes
    disk1: /
    disk5s3: /Volumes/WDP2
    disk5s2: /Volumes/WDP1
    disk5s4: /Volumes/WDP3
    disk6s2: /Volumes/2TB_1
    disk6s4: /Volumes/2TB_3
    disk6s3: /Volumes/2TB_2
    disk7s2: /Volumes/Starry Night Pro 7
HID errors: 3
Kernel log
    Mar 8 17:08:19 firefox (map: 0xffffff80501790f0) triggered DYLD shared region unnest for map: 0xffffff80501790f0, region 0x7fff8a200000->0x7fff8a400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    Mar 8 17:08:59 firefox (map: 0xffffff8051e54870) triggered DYLD shared region unnest for map: 0xffffff8051e54870, region 0x7fff8a200000->0x7fff8a400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    Mar 9 08:11:09 jnl: disk2s4: close: journal 0xffffff8049bb9260, is invalid. aborting outstanding transactions
    Mar 9 08:11:09 jnl: disk3s4: close: journal 0xffffff8049bb9400, is invalid. aborting outstanding transactions
    Mar 9 08:11:09 jnl: disk2s3: close: journal 0xffffff8049bb9740, is invalid. aborting outstanding transactions
    Mar 9 08:11:09 jnl: disk3s3: close: journal 0xffffff8049bb95a0, is invalid. aborting outstanding transactions
    Mar 9 08:11:09 jnl: disk3s2: write_journal_header: error writing the journal header!
    Mar 9 08:11:09 jnl: disk2s2: close: journal 0xffffff8049bb9c20, is invalid. aborting outstanding transactions
    Mar 9 11:42:59 firefox (map: 0xffffff8031b5e780) triggered DYLD shared region unnest for map: 0xffffff8031b5e780, region 0x7fff89e00000->0x7fff8a000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    Mar 10 13:44:08 Limiting closed port RST response from 310 to 250 packets per second
    Mar 10 23:03:12 firefox (map: 0xffffff802a954780) triggered DYLD shared region unnest for map: 0xffffff802a954780, region 0x7fff90000000->0x7fff90200000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    Mar 10 23:20:37 Limiting icmp unreach response from 302 to 250 packets per second
    Mar 11 08:39:04 jnl: disk4s3: write_journal_header: error writing the journal header!
    Mar 11 08:39:04 jnl: disk4s3: close: journal 0xffffff8023522c20, is invalid. aborting outstanding transactions
    Mar 13 17:42:33 Limiting icmp unreach response from 428 to 250 packets per second
    Mar 13 17:42:34 Limiting icmp unreach response from 433 to 250 packets per second
System log
    Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128828
    Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128829
    Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128830
    Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128831
    Mar 14 09:14:35 Adobe Photoshop Elements Editor: Error loading /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: dlopen(/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library, 262): no suitable image found. Did find:
    /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: mach-o, but wrong architecture
    Mar 14 09:14:35 Adobe Photoshop Elements Editor: Error loading /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: dlopen(/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library, 262): no suitable image found. Did find:
    /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: mach-o, but wrong architecture
    Mar 14 09:14:35 Adobe Photoshop Elements Editor: Error loading /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: dlopen(/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library, 262): no suitable image found. Did find:
    /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: mach-o, but wrong architecture
    Mar 14 09:32:27 com.apple.sbd: SOSCCThisDeviceIsInCircle SOSCCThisDeviceIsInCircle!! 7
    Mar 14 09:35:28 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 09:47:41 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Installer" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 09:50:38 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 09:52:55 WindowServer: WSGetSurfaceInWindow : Invalid surface 583724228 for window 1898
    Mar 14 10:09:38 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 10:09:38 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.WebKit.Plugin.64" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 10:09:48 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 10:09:49 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.WebKit.Plugin.64" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 10:09:55 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 10:10:08 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 10:39:34 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=7 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29a29a pid=25591 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
    Mar 14 10:39:34 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=8 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29a29a pid=25591 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
    Mar 14 11:57:26 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=7 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29f29f pid=26088 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
    Mar 14 11:57:26 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=8 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29f29f pid=26088 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
launchd log
    Mar 8 17:07:46 com.apple.xpc.launchd.domain.system: Session adoption is only allowed in user domains.
    Mar 8 17:08:18 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.341, service = com.garmin.renu.service, error = 119: Service is disabled
    Mar 8 17:08:18 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.341, service = com.apple.photostream-agent, error = 119: Service is disabled
    Mar 9 11:41:23 com.apple.xpc.launchd.domain.system: Session adoption is only allowed in user domains.
    Mar 9 11:41:51 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.274, service = com.garmin.renu.service, error = 119: Service is disabled
    Mar 9 11:41:51 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.274, service = com.apple.photostream-agent, error = 119: Service is disabled
    Mar 10 22:48:48 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = imklaunchagent.14852, service = com.parallels.inputmethod.ParallelsIM.5712, error = 134: Service cannot load in requested session
    Mar 10 22:48:58 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = WacomTabletDriv.14813, service = com.wacom.WacomTouchDriver.183780, error = 134: Service cannot load in requested session
    Mar 10 22:48:59 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = prl_deskctl_age.14812, service = com.parallels.mobile.prl_deskctl_agent.220416.UUID, error = 134: Service cannot load in requested session
    Mar 10 22:48:59 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = WacomTabletDriv.14813, service = com.wacom.TabletDriver.184064, error = 134: Service cannot load in requested session
    Mar 10 22:56:21 com.apple.xpc.launchd.domain.system: Session adoption is only allowed in user domains.
    Mar 10 22:59:02 com.apple.xpc.launchd.user.502.100005.Aqua: Could not import service from caller: caller = otherbsd.340, service = com.garmin.renu.service, error = 119: Service is disabled
    Mar 10 22:59:02 com.apple.xpc.launchd.user.502.100005.Aqua: Could not import service from caller: caller = otherbsd.340, service = com.apple.photostream-agent, error = 119: Service is disabled
Loaded kernel extensions
    com.Logitech.Control Center.HID Driver (3.6.0)
    com.Logitech.Unifying.HID Driver (1.2.0)
    com.epson.driver.EPSONProjectorUDAudio (1.40)
    com.parallels.virtualsound (1.0.36 36)
System services loaded
    com.adobe.adobeupdatedaemon
    com.adobe.fpsaud
    com.apple.watchdogd
    com.autodesk.backburner_manager
    com.autodesk.backburner_server
    com.autodesk.backburner_start
    com.google.keystone.daemon
    com.makerbot.conveyor.daemon
    com.oracle.java.Helper-Tool
    com.oracle.java.JavaUpdateHelper
    com.parallels.mobile.dispatcher.launchdaemon
    com.parallels.mobile.kextloader.launchdaemon
    org.macosforge.xquartz.privileged_startx
System services disabled
    com.apple.security.FDERecoveryAgent
    com.apple.mtmd
    com.apple.mrt
    com.apple.mtmfs
Login services loaded
    com.GoPro.GoPro-Importer
    com.Logitech.Control Center.Daemon
    com.adobe.AAM.Scheduler-1.0
    com.adobe.ARM.UUID
    com.adobe.ARM.UUID
    com.adobe.ARM.UUID
    com.adobe.AdobeCreativeCloud
    com.apple.Safari
    - status: 78
    com.apple.mrt.uiagent
    com.citrixonline.GoToMeeting.G2MUpdate
    com.divx.dms.agent
    com.divx.update.agent
    com.google.keystone.system.agent
    com.kodak.BonjourAgent
    com.kodak.KODAK AiO Firmware Updater
    com.kodak.KODAK AiO Software Updater
    com.oracle.java.Java-Updater
    com.parallels.mobile.prl_deskctl_agent.launchagent
    com.parallels.mobile.startgui.launchagent
    com.valvesoftware.steamclean
    com.wacom.wacomtablet
    gldrvmond
    org.macosforge.xquartz.startx
Global login items
    /Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
    /Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
User login items
    Google Drive
    - /Applications/Google Drive.app
    USB Display Agent
    - /Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
    USB Display Agent
    - /Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
User crontab
    #SqzS VERSION = 1.0.0
    #SYMANTEC SCHEDULER CRON ENTRIES. THESE ENTRIES ARE AUTOMATICALLY GENERATED
    #PLEASE DO NOT EDIT.
    # Enc=1 Name="Update Virus Protection" EvType1=1 EvType2=0 Sched=2
    0 8 * * 5 "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" 1 "/Applications/Symantec Solutions/LiveUpdate.app/Contents/MacOS/LiveUpdate" "    " "oapp" "aevt" "exAG" "-update LUdf"
    # Enc=1 Name="My AntiVirus Scan Task" EvType1=2 EvType2=0 Sched=2
    #0 9 * * 6 "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" -n 2 "/Library/Application Support/Symantec/AntiVirus/ScanNotification.app/Contents/scheduledScanner" "    " "NVsi" "SCae" "path" '/' "kydo" "niCE" "long" 0
    # Enc=1 Name="My Product Update Task" EvType1=1 EvType2=0 Sched=3
    0 8 * * * "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" 3 "/Applications/Symantec Solutions/LiveUpdate.app/Contents/MacOS/LiveUpdate" "    " "oapp" "aevt" "exAG" "-update LUlu"
    #SqzS END SYMANTEC CRON ENTRIES
Safari extensions
    Open in Internet Explorer
    - com.parallels.openinie
Widgets
    TimeCalc
    eCalc_Scientific
iCloud errors
    bird 137
    cloudd 18
    storedownloadd 2
    CallHistorySyncHelper 2
Continuity errors
    lsuseractivityd 21
    sharingd 11
Restricted files: 10847
Lockfiles: 19
High file counts
    Desktop: 84
Accessibility
    Keyboard Zoom: On
    Scroll Zoom: On
Contents of /Library/LaunchAgents/com.canon.MFManager.plist
    - mod date: May 22 05:23:32 2012
    - checksum: 290641261
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.canon.MFManager</string>
    <key>Program</key>
    <string>/Applications/Canon Utilities/ImageBrowser EX/ExtApp/MFManager.app/Contents/MacOS/MFManager</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Canon Utilities/ImageBrowser EX/ExtApp/MFManager.app/Contents/MacOS/MFManager</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    </dict>
    </plist>
Contents of /Library/LaunchAgents/com.divx.dms.agent.plist
    - mod date: Nov 17 02:11:48 2014
    - checksum: 637650676
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.divx.dms.agent</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/DivX/DivXMediaServer.app/Contents/MacOS/DivXMediaServer</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    </dict>
    </plist>
Contents of /Library/LaunchAgents/com.divx.update.agent.plist
    - mod date: May 19 16:24:29 2014
    - checksum: 3867571547
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.divx.update.agent</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/DivX/DivXUpdate.app/Contents/MacOS/DivXUpdate</string>
    <string>/silent</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>10800</integer>
    </dict>
    </plist>
Contents of /Library/LaunchAgents/com.kodak.BonjourAgent.plist
    - mod date: Sep 21 01:39:00 2012
    - checksum: 2625351456
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Kodak Version</key>
    <string>7.1.6.10</string>
    <key>Label</key>
    <string>com.kodak.BonjourAgent</string>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Printers/Kodak/AiO_Printers/KodakAiOBonjourAgent.app/Contents/ MacOS/KodakAiOBonjourAgent</string>
    </array>
    <key>ServiceIPC</key>
    <true/>
    </dict>
    </plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
    - mod date: Feb 15 11:22:20 2014
    - checksum: 2857777334
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.oracle.java.Java-Updater</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
    <string>-bgcheck</string>
    </array>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
    <key>StartCalendarInterval</key>
    <dict>
    <key>Hour</key>
    <integer>71</integer>
    <key>Minute</key>
    <integer>54</integer>
    <key>Weekday</key>
    <integer>5</integer>
    </dict>
    </dict>
    ...and 1 more line(s)
Contents of /Library/LaunchAgents/com.parallels.mobile.prl_deskctl_agent.launchagent.plist
    - mod date: Feb 24 10:45:51 2015
    - checksum: 1795713191
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>EnableTransactions</key>
    <true/>
    <key>KeepAlive</key>
    <dict>
    <key>PathState</key>
    <dict>
    <key>/etc/com.parallels.mobile.prl_deskctl_agent.launchd</key>
    <true/>
    </dict>
    </dict>
    <key>Label</key>
    <string>com.parallels.mobile.prl_deskctl_agent.launchagent</string>
    <key>LimitLoadToSessionType</key>
    <array>
    <string>Aqua</string>
    <string>LoginWindow</string>
    </array>
    <key>Program</key>
    <string>/Applications/Parallels Access.app/Contents/MacOS/Parallels Access Agent.app/Contents/MacOS/prl_deskctl_agent</string>
    </dict>
    </plist>
Contents of /Library/LaunchAgents/com.wacom.wacomtablet.plist
    - mod date: Oct 11 17:37:46 2013
    - checksum: 2972905917
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>EnvironmentVariables</key>
    <dict>
    <key>RUN_WITH_LAUNCHD</key>
    <string>1</string>
    </dict>
    <key>KeepAlive</key>
    <dict>
    <key>SuccessfulExit</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.wacom.wacomtablet</string>
    <key>LimitLoadToSessionType</key>
    <array>
    <string>Aqua</string>
    <string>LoginWindow</string>
    </array>
    <key>Program</key>
    <string>/Library/Application Support/Tablet/WacomTabletSpringboard</string>
    <key>RunAtLoad</key>
    <true/>
    ...and 4 more line(s)
Contents of /Library/LaunchAgents/org.macosforge.xquartz.startx.plist
    - mod date: Aug 11 16:52:54 2014
    - checksum: 2451978492
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>org.macosforge.xquartz.startx</string>
    <key>ProgramArguments</key>
    <array>
    <string>/opt/X11/lib/X11/xinit/launchd_startx</string>
    <string>/opt/X11/bin/startx</string>
    <string>--</string>
    <string>/opt/X11/bin/Xquartz</string>
    </array>
    <key>Sockets</key>
    <dict>
    <key>org.macosforge.xquartz:0</key>
    <dict>
    <key>SecureSocketWithKey</key>
    <string>DISPLAY</string>
    </dict>
    </dict>
    <key>ServiceIPC</key>
    <true/>
    <key>EnableTransactions</key>
    <true/>
    ...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.autodesk.backburner_manager.plist
    - mod date: Feb 4 12:44:56 2013
    - checksum: 3394451584
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>KeepAlive</key>
    <dict>
    <key>PathState</key>
    <dict>
    <key>/usr/discreet/backburner/nrapi.conf</key>
    <true/>
    </dict>
    </dict>
    <key>Label</key>
    <string>com.autodesk.backburner_manager</string>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/discreet/backburner/backburnerManager</string>
    </array>
    </dict>
    </plist>
Contents of /Library/LaunchDaemons/com.autodesk.backburner_server.plist
    - mod date: Feb 4 12:44:56 2013
    - checksum: 2405015914
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>KeepAlive</key>
    <dict>
    <key>PathState</key>
    <dict>
    <key>/usr/discreet/backburner/nrapi.conf</key>
    <true/>
    </dict>
    </dict>
    <key>Label</key>
    <string>com.autodesk.backburner_server</string>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/discreet/backburner/backburnerServer</string>
    </array>
    <key>Nice</key>
    <integer>18</integer>
    </dict>
    </plist>
Contents of /Library/LaunchDaemons/com.autodesk.backburner_start.plist
    - mod date: Feb 4 12:44:56 2013
    - checksum: 597826117
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>RunAtLoad</key>
    <true/>
    <key>Label</key>
    <string>com.autodesk.backburner_start</string>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/discreet/backburner/backburner</string>
    <string>boot</string>
    </array>
    </dict>
    </plist>
Contents of /Library/LaunchDaemons/com.makerbot.conveyor.plist
    - mod date: Dec 2 11:47:26 2013
    - checksum: 147573995
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>com.makerbot.conveyor.daemon</string>
        <key>WorkingDirectory</key>
        <string>/Library/MakerBot</string>
        <key>ProgramArguments</key>
        <array>
            <string>/Library/MakerBot/conveyor-svc</string>
            <string>--config_file</string>
            <string>/Library/MakerBot/conveyor.conf</string>
        </array>
        <key>KeepAlive</key>
        <true/>
        <key>EnvironmentVariables</key>
        <dict/>
        <key>RunAtLoad</key>
        <true/>
        <key>UserName</key>
        <string>_conveyor</string>
    </dict>
    ...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.parallels.mobile.dispatcher.launchdaemon.plist
    - mod date: Feb 24 10:45:50 2015
    - checksum: 1994226602
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>ExitTimeOut</key>
    <integer>150</integer>
    <key>Label</key>
    <string>com.parallels.mobile.dispatcher.launchdaemon</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Parallels Access.app/Contents/MacOS/Parallels Access Dispatcher Service.app/Contents/MacOS/prl_pm_service</string>
    <string>-e</string>
    <string>--logfile</string>
    <string>/var/log/prl_disp_service_server.log</string>
    <string>--pidfile</string>
    <string>/var/run/prl_pm_service.pid</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    </dict>
    </plist>
Contents of /Library/LaunchDaemons/com.parallels.mobile.kextloader.launchdaemon.plist
    - mod date: Feb 24 10:45:51 2015
    - checksum: 3938648138
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>ExitTimeOut</key>
    <integer>150</integer>
    <key>Label</key>
    <string>com.parallels.mobile.kextloader.launchdaemon</string>
    <key>ProgramArguments</key>
    <array>
            <string>/sbin/kextload</string>
    <string>/Applications/Parallels Access.app/Contents/Library/Extensions/10.9/prl_virtual_sound.kext</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    </dict>
    </plist>
Contents of /private/etc/ssh_config
    - mod date: Nov 19 19:03:16 2012
    - checksum: 1281775184
     Host *
       SendEnv LANG LC_*
    Host *
        XAuthLocation /opt/X11/bin/xauth
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
    - mod date: Jan 20 19:45:18 2011
    - checksum: 408149527
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
    - mod date: Jan 29 16:03:43 2010
    - checksum: 2544798274
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Reader 8/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
    - mod date: Sep 11 18:20:35 2011
    - checksum: 2170691092
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Reader 9/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
    - mod date: Oct 19 12:47:52 2009
    - checksum: 10744905
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.apple.FolderActions.folders.plist
    - mod date: Jan 30 08:36:08 2015
    - checksum: 1189540302
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.apple.FolderActions.folders</string>
    <key>Program</key>
    <string>/usr/bin/osascript</string>
    <key>ProgramArguments</key>
    <array>
    <string>osascript</string>
    <string>-e</string>
    <string>tell application "Folder Actions Dispatcher" to tick</string>
    </array>
    <key>WatchPaths</key>
    <array/>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist
    - mod date: Dec 18 09:24:48 2008
    - checksum: 3493273791
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.apple.Safari</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/S afariSyncClient</string>
    <string>--sync</string>
    <string>com.apple.Safari</string>
    <string>--entitynames</string>
    <string>com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder</string>
    </array>
    <key>RunAtLoad</key>
    <false/>
    <key>ThrottleInterval</key>
    <integer>60</integer>
    <key>WatchPaths</key>
    <array>
    <string>/Users/USER/Library/Safari/Bookmarks.plist</string>
    </array>
    </dict>
    ...and 1 more line(s)
Contents of Library/LaunchAgents/com.citrixonline.GoToMeeting.G2MUpdate.plist
    - mod date: Dec 15 10:55:51 2014
    - checksum: 3001252484
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.citrixonline.GoToMeeting.G2MUpdate</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Library/Application Support/CitrixOnline/GoToMeeting/G2MUpdate</string>
    </array>
    <key>StartInterval</key>
    <integer>3660</integer>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.parallels.mobile.startgui.launchagent.plist
    - mod date: Mar 10 23:00:25 2015
    - checksum: 662430762
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>ExitTimeOut</key>
    <integer>150</integer>
    <key>Label</key>
    <string>com.parallels.mobile.startgui.launchagent</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Parallels Access.app/Contents/MacOS/prl_deskctl_wizard</string>
            <string>--autorun</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.valvesoftware.steamclean.plist
    - mod date: Mar 7 15:48:06 2014
    - checksum: 1327160095
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.valvesoftware.steamclean</string>
    <key>Program</key>
    <string>/Users/USER/Library/Application Support/Steam/SteamApps/steamclean</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Library/Application Support/Steam/SteamApps/steamclean</string>
    <string>Public</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>SteamContentPaths</key>
    <array>
    <string>/Users/USER/Library/Application Support/Steam/SteamApps</string>
    </array>
    <key>WatchPaths</key>
    <array>
    <string>/Applications/Steam.app</string>
    </array>
    </dict>
    </plist>
App extensions
    com.google.GoogleDrive.FinderSyncAPIExtension
    com.parallels.desktop.console.Resource-Monitor
Installations
    Topaz Detail2: 11/15/12, 2:58 PM
    Topaz DeNoise 5: 11/15/12, 2:57 PM
    Topaz Adjust 5: 1

Mavericks / Canon Canoscan 8800F: Hardware Buttons not working.

I've just upgraded to Mavericks. I've also updated the driver (to 13.9.2a) and installed the latest MP Navigator 1.0 (1.0.7). Is there something else I need to do?
I'm having two problems since the upgrade:
- The hardware buttons on the scanner cover have stopped working
- I'm unable to add the scanner in the System Preferences: Printers and Scanners dialog, because it's not listed as one of the available devices.
However:
- MP Navigator as well as TWAIN - compatible applications (e.g. Adobe Acrobat Pro) are working properly: they are able to see and use the 8800F (even though it's not listed as an available scanner in System Preferences)
Further explanation: The row of hardware buttons on the scanner's cover have stopped working since the upgrade to Mavericks. For example
- The "Copy" button is supposed to launch MP Navigator, scan the document on the glass and print the document.
- "Email" is supposed to scan the document, open a new message in "Mail" and insert the document as an attachment
- There are also several "PDF" buttons that are supposed to scan to a PDF document and do various things with it..
These buttons worked in previous MacOS versions, but none of them do anything since I've installed Mavericks.
Also, in the System Preferences: Printers and Scanners window: I thought I'd try deleting and re-adding the 8800F there to see if that might clear up the buttons problem. I deleted it, but am unable to add it back because it is not listed as one of the available devices. So then I checked the "System Report" under "About this Mac," and found that Canoscan is listed there as one of the USB devices.

Responding to my own post: I've learned that the problem is in the ICA driver for this device, and we're waiting for an update to that to resolve this problem.
For details, please see https://discussions.apple.com/message/23758000#23758000

OpenGL Hardware acceleration not working?

Similar Messages

Maybe you are looking for