Opengl issue in hp dv4-3145tx like the hp dv6 6100 series

i have an hp dv4 3145tx with i5 2430m processor and amd 6750m graphics card but it seems to have the same problem as dv6 6100 series in using amd graphics card in opening opengl applications and since in hp dv6 problem is solved by updating bios but there is no suvh bios for my dv4 and yes i have updated my bios and graphics driver to latest version .everytime i try opening an opengl application with amd one it says opengl 2.0 or above not supported and application refuses to start up . so any solution ???????

Try this BIOS Update
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96883-1&cc=us&dlc=en&lc=en&...
Also Notify me If the Problem is solved, I am also searching for a laptop!

Similar Messages

What controller do I use with my 15" Macbook Pro Retina to play games like the Lego Star Wars series?

I have a bright and shining new 15" Macbook Pro with Retina display. I did not upgrade the processor or the storage. I want to play games on this great computer, too, games that need a controller . . ie . . The Lego Star Wars series and other action games that require a controller like I use on my X Box 360.
What works? What works best?

It would help to post this in a more proper form. This is for the iTunes family of stores.

Issue with recorded sound- sounds like the recordings were made underwater.

Hi, all.
I'm running Adobe Audition CS5.5 on a Toshiba Satellite Pro C660-1UZ with Windows 7 Home Premium installed. My machine meets all of the system requirements, as far as I can tell, and yet recordings made in Adobe Audition sound like they were made underwater.
For reference:
http://www.soundclick.com/player/single_player.cfm?q=hi&songID=11138745
I'm not using an interface at present, but would be willing if there were a cheap model available.
Thanks for any help,
Casey

I have a slightly older Toshiba Satellite notebook that I use for recording and mixing and I can tell you that the built in audio interface (i.e. the mni jack mic input) is worse than bad. I can get away with it for Skype phone calls but that's about it--and even for Skype I often plug in my interface.
The other thing going on with the sample you posted is that the levels are very low so the need to crank things up to hear anything just accentuates the noise.
Basically, Audition just takes the signal provided by your mic and interface and doesn't affect the sound in any way until you deliberately add processing. You really do need to invest in an interface--pretty well any two track USB devices will be a vast improvement on the Toshiba mic input.

HT4623 i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+

I have an apple id for my ipod touch at home. My company is planning to issuing Ipads. Should I use the same apple id on the ipad for those apps I purchase and would like to purchase and use on my work ipad?

I have an apple id for my ipod touch at home. My company is planning to issuing Ipads. Should I use the same apple id on the ipad for those apps I purchase and would like to use on my work ipad?

Yes, otherwise you will have to pay for those apps again. If an app is purchased by one Apple ID, he/she will be able to redownload it again for no cost (note: this does apply to songs, but NOT to movies).

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Hi to All, My wife still has ios 6 on her ipad (she likes the look). I will do the 7.1 upgrade when it is released. Should there be any issues going from 6 directly to 7.1? Thanks!

Hi to All, My wife still has ios 6 on her ipad (she likes the look). I will do the 7.1 upgrade when it is released. Should there be any issues going from 6 directly to 7.1? Thanks!

There shouldn't be. I went from iOS5.whatever to iOS6.1 with no issues.
Just make sure to back everything up before you do it, just in case all doesn't go as planned.
I always do mine the old fashioned way, download the full OS via iTunes so if you've already got it linked to a computer and been using iTunes to do updates/syncing that's how I'd suggest you do it.

In develop "mode" and I can't locate my "Basic" slider that opens up my "Treatment" sliders. There's not even a drop down arrow to Minimize and open. I was working in it and the next moment it was gone. I'm in Lr 5 using a trackpad. Seems like the issue c

In develop "mode" and I can't locate my "Basic" slider that opens up my "Treatment" sliders. There's not even a drop down arrow to Minimize and open. I was working in it and the next moment it was gone. I'm in Lr 5 using a trackpad. Seems like the issue came up while using my trackpad. Any thoughts?

In the Develop Module, you right-click on one of the other Panel Headers (for example, Tone Curve) and then place a check next to Basic

Hi there, I moved to a new country (Luxembourg ), my previous card is not working anymore, I am trying to change country and region but it looks like the option is not available, could you support on the issue please ? Thx ahead, Corneliu

Hi there, I moved to a new country (Luxembourg ), my previous card is not working anymore, I am trying to change country and region but it looks like the option is not available, could you support on the issue please ? Thx ahead, Corneliu

CHANGING APPLE ID/EDIT ACCOUNT INFORMATION/CHANGE ITUNES COUNTRY
Tap Settings / iTunes & App Stores, then tap the Apple ID signed in. Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID http://support.apple.com/kb/HT2731?viewlocale=en_US
Go to settings/facetime and tap the ID there and log out and log in with new ID.
Go to settings/messages and turn off imessages wait 30 seconds and turn it back on, go to “receive messages at” tap on the ID there, sign out and sign in with new ID.
Go to settings/icloud and delete the account and when prompted select “keep information on your device” then turn it back on with the new ID.
To edit account information tap Settings / iTunes & App Stores / Apple ID: / View Apple ID
To change your iTunes Store country, sign in to the account for the iTunes Store region you would like to use, tap Settings/iTunes & App Store/Apple ID/View Apple ID/Country/Region
Read this article for information http://support.apple.com/kb/HT1311

I changed my system on my mac 10.6.8 by doing a migration of my data and now i do find issues when i open logic, like i cant close it anymore (need to use the force quit option) if i ll bounce anything it will crash and same thing will happen if i wanna i

i changed my system on my mac 10.6.8 by doing a migration of my data and now i do find issues when i open logic, like i cant close it anymore (need to use the force quit option) if i ll bounce anything it will crash and same thing will happen if i wanna import something, if anybody has a idea??

Hi
This any help?
http://support.apple.com/kb/TS3968
CCT

Hello. I recently updated numbers on my macbook pro. I like the auto completion feature (proposing te word as I type). With this new update, I cannot see this feature and it doesn't work automatically. Can I have any help on this issue ?

Hello. I recently updated numbers on my macbook pro. I like the auto completion feature (proposing te word as I type). With this new update, I cannot see this feature and it doesn't work automatically. Can I have any help on this issue ?

This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl

Apple: please finally fix the 8600m opengl issues!

When will the nvidia 8600m opengl issues finally be resolved?
Getting quite sick and tired of having to use the sdlmame software renderer this past half year of 10.5. The sdlmame opengl rendering worked fine under 10.4 and it works fine on 10.5 on different video cards, so it's definitely not the sdlmame opengl rendering code. Just a very incomplete opengl driver from apple.
To check/reproduce:
- make sure you have the latest xcode installed
- install the latest stable developer packages of sdl http://www.libsdl.org/
- download and build sdlmame from http://rbelmont.mameworld.info/?page_id=163
- download one of the free romsets from http://mamedev.org/
- run sdlmame using the software renderer: ./mame -rp /path/to/whereromset_wassaved <thedownloadedgame>
- run sdlmame using the opengl renderer: ./mame -rp /path/to/whereromset_wassaved -video opengl <thedownloadedgame>
The advantage of using opengl will be that the screen will be drawn faster, just too bad it is totally useless utter crap that is being output.
Apple: please fix this! These mbp's aren't the cheapest machines around, some support would be nice.

Presuming this hasn't been addressed in 10.5.3, you can submit comments to Apple regarding Mac OS X by submitting feedback here:
http://www.apple.com/feedback/macosx.html

My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows). The key behaves the same for the laptop keyboard and for an external Apple keyboard? This just started in last week after 6 months of use

My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).
The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard.
This just started in last week after 6 months of use. The right shift key and other keys on the keyboard all appear to work correctly.
Suggestions greatly appreciated.

I have a solution to this issue now after a discussion with Apple Support. Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences. Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key). I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility. The SSD appears to be running better as a result as well.
Hope that this is of use to someone else in the future.

Every time I open it it's like the first time

Just moved to a new system and had to re download itunes. now every time I open it it's like the first time having to agree to the legal stuff and re adding the tool bars etc. Please help I have a windows 7 64 bit system and my old system was the same so I do not know why I'm having this problem!

McAfee AntiVirus by any chance? See the thread Why does iTunes delete my itunesprefs.xml?
Or it could be an issue with the SC Info folder. See TS1277 - iTunes: Missing folder or incorrect permissions may prevent authorization for details.
tt2

I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
Rodney
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]

silkman1
I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
know if I am misinterpreting anything that you have written.
You have a video created in Windows Movie Maker.
How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
But, the pan and zoom effect is not seen in playback of the export.
Is all of the above correct so far?
If so....we are going to need some more details from you...
a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
Position (for Pan) in the Motion Panel expanded?
c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
so that we are in sync to resolve the issue.
Thanks.
ATR

Opengl issue in hp dv4-3145tx like the hp dv6 6100 series

Similar Messages

Maybe you are looking for