OpenGL problem with ASUS EAH4850

I have 64bit XP and 64bit Photoshop installed. I have the latest driver from asus and OpenGL is dimmed in the "Performance" tab under preferences. I installed the Photoshop update but when i look in "About Photoshop..."  it shows 11.0 as the version. I have the ASUS EAH4850 512MB DDR3. Please let me know of any suggestions.
Thank you
Mikhail

That card is not on the Adobe list of tested cards for CS4 so it may not be suitable.
In particular some GPU-accelerated features require graphics support for Shader Model 3.0 and OpenGL 2.0.

Similar Messages

  • Linksys wireless router G problem with ASUS Eee PC 1000H laptop

    This is a new laptop with a Ralink rt2860 chipset. Problem: I have trouble connecting to the router at my office. When I can connect, I often get such a low connection speed that the signal drops out and I lose the connection entirely. I have no trouble connecting to other routers. ASUS tech support says this is not a problem with the laptop. The rep told me that some "older" routers have a problem recognizing the Ralink chipset. Logically, if I can connect but it drops out, does this indicate a need for a signal booster? Does anyone know about any related compatibility issues? Thanks for any help; this is driving me nutty!

    I know just enough to be dangerous. How is the change the channel on the router changed? Sounds like a system administrator job...

  • Problem with ASUS laptop and Windows 8

    Hii
    I have a problem with my ASUS vivo LAPTOP. Its running on Windows 8 and going pretty well, but sometimes when I use the Google chrome browser and open multiple pages the computer freezes and does nothing which requires me to shut it down by long pressing
    the power button.
    The question is what is the problem and does this process of long pressing the power button to shut it down harm my computer Hardware or Software?

    Are you sure the issue is happening only when you use Google chrome. Then, it is an issue with the browser. Remove chrome and then re-install and check if that fix the issue.
    Regarding force shut down is only meant to be used in emergency situations. If the computer is forced to shutdown everytime, this can lead to formation of bad sectors in hard disk and reduce its life span.
    Hope this helps.

  • Problems with Asus Xonar D2X and DMIX

    Hello,
    i have a problem with my ASUS Xonar D2X and DMIX. It is not possible for me to change the "defaults.pcm.dmix.format" in /usr/share/alsa my audio/video/youtube files are always playing with "format: S32_LE" (defaults.pcm.dmix.rate is working fine). On my other rig with an Onboard Realtek Soundcard i dont have this problem. Iam also using on a extern DAC.
    Please help me.

    If it only needs 12V, you could use one of the auxiliary power connectors in the PCI bay. See Figure 1
    <http://developer.apple.com/documentation/Hardware/Conceptual/HWtechPCI/Articles/pciimplementation.html>
    You can get the connector from this cable
    <http://www.welovemacs.com/9227128.html>

  • OpenGL problems with mavericks

    OSX Mavericks OpenGL Viewport Performance Issues
    Considering that I had not this problem previously working on Lion, Mavericks seems to have problem when you are working with softwares such as Modo and Blender.
    The 3d orbit and the pan command  slow down quite annoyingly if compared with the normal performance you generaly had in the previous OS.
    Sometimes it lacks fluidity, I guess it might be a problem with the drivers for the graphic card ..... I'm not an expert.
    A way to work around the problem is to restart the software you are working with.
    Thank you.

    OSX Mavericks OpenGL Viewport Performance Issues
    Considering that I had not this problem previously working on Lion, Mavericks seems to have problem when you are working with softwares such as Modo and Blender.
    The 3d orbit and the pan command  slow down quite annoyingly if compared with the normal performance you generaly had in the previous OS.
    Sometimes it lacks fluidity, I guess it might be a problem with the drivers for the graphic card ..... I'm not an expert.
    A way to work around the problem is to restart the software you are working with.
    Thank you.

  • Wireless printing problems with Asus router RT-N56U and HP8500

    Neew MacBookPro with Lion. Also have HP 8500a 909a printer hooked up to an Asus router RT-N56U Google search indicates MANY problems with HP printers being used with wireless Mac, even with Airport. Of course we know HP is one of the worse customer support companies on earth,, so I came here in hopes to find a solution. I updated my mac and firmware for router. The Mac doesn't find any printers wirelessly at all. If I hook up with a cable it works fine.. Thanks

    I own the RT-N56U (best router on the market hands-down), along with an HP LaserJet 1320, however it's connected via USB to my computer instead of the router. While it's true that HP don't have a terrific support record for Mac drivers in fairness it may be the Asus router causing the problem; if you Google "Asus RT-N56U" and "mac os x print server", you'll find complaints similar to yours from other users. From what I understand this is partly dependent on your printer and whether it supports network printing, and partly on compliance with the Asus router firmware. I Googled what appears to be a possible solution to configuring the Asus print server, however I haven't yet tested this myself:
    http://forums.techarena.in/networking-security/1424669.htm#post5384770

  • OpenGL problem with PSE9

    Hello,
    On a Windows XP SP3 machine with Intel processor and Gigabyte graphics card with OpenGL 3.1 I use Photoshop Elements 9
    When I choose for a Pan & Zoom transition in the slideshow mode (with Full Screen, F11) a Adobe message is saying that my system does not support OPENGL.
    I have the newest version of the AMD (ATI) catalyst drivers installed.
    Graphics card Gigabyte GV-R577SL-1GD
    Motherboard ASUS P5Q3
    How can I check my system if it is fully supporting OpenGL?
    Is there a solution for this issue?
    Thank you in advance.
    Kees
    Message was edited by: Vartiala
    In the meantime I have tested my system for OpenGL with GPU Caps Viewer version 1.14.4 from www.ozone3d.net. Done all available tests. No problems or restricted capabilities during the tests.
    Remains that PSE9 is still detecting that my system does not support OpenGL.
    Message was edited by: Vartiala
    I found a similar Post about OpenGL in this forum, titled : Elements 9, OpenGl not recognized on Radeon 5670 of 18 Apr. 2011 9:16 PM

    Hi,
    I've installed the video card driver directly from the Nvidia website, and also checked with GeForce Experience, all is clear.
    For Photoshop, AAM don't display any update for him, only for After Effects CC (http://puu.sh/hdX68/54d5595104.png). I've tried with a manual installer, but he's saying "Updates can't be applied. This corrector don't work in your case." (http://puu.sh/hdXzX/040d671391.png).

  • Problem with ASUS wireless dongle

    Hello. I recently bought an ASUS WLAN USB 2.0 adapter and am having problems using it with my MDD. At unpredictable moments, I get the screen saying "you need to restart your computer" (is that a "kernel panic"?). Otherwise, the unit works perfectly.
    Has anyone else had experience with this adapter? And/or does anyone have any suggestions on how to get it to calm down?
    MDD Dual 1.25   Mac OS X (10.4.3)  

    Hello. I recently bought an ASUS WLAN USB 2.0 adapter
    and am having problems using it with my MDD. At
    unpredictable moments, I get the screen saying "you
    need to restart your computer" (is that a "kernel
    panic"?). Otherwise, the unit works perfectly.
    Has anyone else had experience with this adapter?
    And/or does anyone have any suggestions on how to get
    it to calm down?
    Yes, that is a kernel panic. I have no experience with it but if you don't get kernel panics without the adapter, it's almost surely a driver problem. Is this the WL-167g? I noticed that there were no OS X drivers, nor did it mention Mac support on Asus' website.

  • OpenGL Problems with Alu iMac

    Hi, I've got a small but annoying problem wit my 20" Alu iMac (base model). It seems that some openGL based graphics are not shown correctly. Some polygones are blacked out resulting in an image with black triangles and trapezes, where the blacked out parts change constantly (I presume at the same rate as the frames are calculated).
    I encountered this problem first using Windows and 3D-Games with Boot Camp as well as using Parallels or VMWare Fusion. Then I tried a little 3D-Game for MacOS called "l1neum". Same problem.
    Now I made a clean install of MacOS 10.5 and realized that the problem occours with CoverFlow in the new Finder.
    Has anybody else experienced this problem or got a solution?

    Try downloading and installing the 10.4.10 Combo update. Let the update run alone. Don't use the Mac for anything else while it installs the update, including Airport and Bluetooth. Use a wired keyboard and mouse if you can.
    Mac OS X 10.4.10 Combo Update v1.1 (Intel)
    Repair Disk Permissions after the update is installed and you have restarted the Mac.

  • OpenGL Problems with the 8600M

    Any ideas on when Apple will release a bug fix to address OpenGL on Macbook Pros?

    Although, I do feel strongly about this, I think it should be handled more calm. If you are experiencing poor performance, I was able to get a minor boost by stripping the PowerPC Code out of my game's binary. (Provided that the game is universal, because I don't think my Mac was recognizing it as universal).
    I ran this command
    ditto --arch i386 /Applications/pathtogame/game.app /Applications/pathtogame/gameintel.app
    Depending on the size of the binary, this may take 5 seconds or 5 minutes. I got about a 5-10FPS boost. Still pretty bad performance.
    Here is a screenshot of the performance. (Note, FPS is displayed at lower right, and notice the strange wall shader. There appears to be lines on it, when on Windows, there are no lines, just a normal wall with a shader on it)
    http://img176.imageshack.us/img176/9004/openglmacou7.jpg

  • Problems with Comodo Kill Switch, Windows Services & Bitlocker Encryption on Asus N56VZ

    Hi All,
    So recently I found myself stuck in a different scenario than before, and after many hours researching and efforts to fix this I still find myself stuck  yet with a few options still to fix.
    What is the problem?
    So as a security cautious user when i first got to Windows 8.1 Pro 64Bit I encrypted both the C and D drive (Split the main disk) to protect myself and my family. Unfortunately that has not been very helpful with the way in which booting and running from
    either external USB devices or CD/DVD works, not allowing myself to at all.
    My usual security suit I  use is Comodo Internet Security, which additionally comes with Comodo Kill Switch. Whilst using the application instead of stopping one of the TCP connections I was meant to I accidently stopped an Windows Explorer connection.
    For some reason since then Windows Explorer, nor most windows apps or services themselves will run. For example msconfig will run but sfc /scannow or mmc will not, whether in safe mode or normal mode.
    What Caused the Problem?
    Cannot 100% say
    What I Think Caused the Problem?
    Myself running Comodo Kill Switch stopping a vital server connection with Windows Explorer that messed up alot. Or a potential Virus unknown how cannot fully scan system as wont boot externally or run many apps.
    Additional Info
    Asus Webcam is Disabled on Purpose
    Laptop was fully customized to run latest games full graphics minus Anti Aliasing, works with Evolve + CoD Advanced Warfare
    Laptop does not boot if USB Keyboard plugged in, works with everything else normal (had this on other systems no problem for me)
    Ask me for more info if required to add here, braindead again
    Specifications of my system
    Intel® Core™ i7 3610QM Processor
    Windows 8.1 Pro 64Bit
    Intel® HM76 Chipset
    DDR3 1600 MHz SDRAM, 2 x SO-DIMM 8GB
    15.6" HD (1366x768)/Full HD (1920x1080)/Wide View Angle LED Backlight
    NVIDIA® GeForce® GT 650M with 2GB DDR3 VRAM
    1TB 5400RPM OR 750GB 5400/7200RPM (Cannot remember off top of head, braindead)
    Super-Multi DVD 
    Kensington lock (Security Feature)
    LoJack (Security Feature)
    BIOS Booting User Password Protection (Security Feature)
    HDD User Password Protection and Security (Security Feature)
    Pre-OS Authentication by programmable key code (Security Feature)
    What Can Run and Won't Run?
    ON BOOT:
    Bitlocker Encryption Password & Advanced Settings are accessible
    Bios (password protected) is accessible
    Windows Recovery Mode is accessible (Think it is F9 or F10)
    Windows Logon Password Screen is accessible
    ON NORMAL/SAFE-MODE START UP:
    After Log-In Windows Explorer will not run
    Task Manager will run, also allows me to browse the files when trying to start new task
    Can run Command prompt
    Cannot run any control panel items
    Cannot run services.msc
    Cannot run mmc
    Cannot run sfc
    Every time it metions windows drive is locked
    Start Error's when running certain applications (Will post codes soon)
    Rufus USB Tool does run
    Cannot boot Kali Linux off USB
    Cannot boot Windows 8.1 off USB
    Cannot boot Windows 8.1 off DVDRW
    Fixwin2 will not run
    Apps either work or don't whether in safe mode or normal
    Cannot use Windows Installer
    What Fixes I Have Tried So Far
    Ok so like any normal user I don't want to lose my files. So here are what I have tried so far:
    Repair MBR (Repair Completed, No Luck)
    SFC /SCANNOW (Returns Error 'Windows Resource Protection could not start the repair service')
    Tried sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=c:\windows (Could not access drive)
    Fixwin2 (Will not run in either normal or safe mode)
    Booting using Windows 8.1 via USB (Cannot boot from extermal devices due to Bitlocker Encryption)
    Booting using Kali Linux Via DVD & USB (Cannot boot from external devices due to Bitlocker Encrytption)
    How do I know it is because of Bitlocker, because last time I disabled it, I could run from external devices
    Tried to run bitlocker to change settings (Will not run)
    Have used both password and recovery keys to unlock driver, they work but when applications are running on windows the drive is still locked?
    Tried windows Automatic Diagnostic and Repair (Could not repair anything, did make a log I am still to extract from the syste)
    There are No System Restore Points
    I'm sure there is much more information I could post however I will leave it on an ask to know basis, apart from the log files and further information to gather. Below is my list of trial and error fixes to try for today (need more ideas and help please!):
    Hiren's 15.2 Boot CD via DVD (NOT ABLE TO BOOT)
    Hiren's 15.2 Boot CD via USB (NOT ABLE TO BOOT)
    Research into the Bios and Possible Update in-case of implementation of Virus, can access flash utility (STILL NOT TESTED)
    Try and get a portable version or a working version of windows installer to try and re-install Comodo Internet Security (STILL NOT TESTED)
    Another way to disable Bitlocker
    Anti-Malware / Anti-Virus Scan If Possible to Run One
    Bitlocker Repair Tool, will try this also
    I have posted this as have not found much info online, usually find it and crack on but this time things are a little more tricky, my priority task I really need to do is remove the Bitlocker Encryption, but if the application will not run... what do I do
    then?
    Thanks for your time reading all, Sorry for any poor formatting or spelling.
    Update 1: MMC.exe Error Code
    Ok so now have the computer in safe mode, still same as before, no explorer.exe, no services etc... Just went into the Task Manager > Services (Tab) > Open Services (Option at bottom)
    This is the error I get:
    'The Instruction at 0x785a746c referenced memory at 0x000000a8. The memory could not be read.
    Any Ideas on what this error is and why?
    Update 2: CHKDSK Works with no Fix
    Update 3: Hiren's 15.2 Boot CD - USB Boot still no luck booting around Bitlocker Encryption
    Just to explain again, I already have unlocked the drive with correct bitlocker password or recovery key yet the drive remains locked not allowing windows refresh of files of complete install from the windows recovery menu as keeps saying drive is locked

    Ok so attempt number two to write this update via bloody phone! (Just refreshed page whilst writing!)
    Update 4:
    Problem - cannot run from bootable devices (DVD/USB)
    Cause - bitlocker fully encrypted drive stops this working
    Repair - Boot up holding F9 to enter windows recovery Input Bitlocker recovery keys to unlock drives
    Navigate to Command Prompt in advanced settings Execute following code:
    Repair-bde c: d: -rp 000111-222333-444555-etc...
    (Code found from https://technet.microsoft.com/en-us/library/ee523219%28v=ws.10%29.aspx)
    Note for those using this: It is common while unlocking certain drives to get errors such as: Quote from http://www.benjaminathawes.com/2013/03/17/resolving-partial-encryption-problems-with-bitlocker/
    "LOG INFO: 0x0000002aValid metadata at offset 8832512000 found at scan level
    1.LOG INFO: 0x0000002b Successfully created repair context.
    LOG ERROR: 0xc0000037 Failed to read sector at offset 9211592704.
    (0×00000017) LOG ERROR: 0xc0000037 Failed to read sector at offset 9211593216.
    (0×00000017) …followed by around 20 similar entries that differed only by the offset value"
    Repair Status for Update 4: COMPLETED - However over wrote D drive data so now need to recover that
    Problem 2 - windows services corrupted along with windows files
    Cause - Unknown
    Repair - wait until system is fully decrypted Once fully decrypted ensure boot from USB/DVD
    Re-do fixes that would not work before if this has fixed boot issue Confirm fix / update post Hope anything I put here helps others also

  • Memory Problem With 4gb Crucial Ballistix and Asus M4A785TD-V EVO

    motherBoard: ASUS M4A785TD-V EVO
    bios Version :2005
    Video: amd hd5750
    Processor: AMD PHENON II X2 550 3.100MHZ
    Memory: Crucial
    Modele Memory: blt4g3d1608dt1tx0
    Capacity: 4GB
    greetings to all
    i have asus m4a785td-v evo mobo. i ve bought 4 gb crucial ballistix ram today. it says on product its 1600 mhz and cl8 but it shows on my pc 1333 mhz and cl9.  when i was searching for this problem i came across this topic: http://forum.crucial.com/t5/Crucial-Ballistix-gaming-memory/Memory-Probleme-With-8GO-Crucial-Ballistix-and-Asus-M4A785TD-V/td-p/9464 can i apply the same settings? how can i fix that?  is it possible via bios settings? thx in advance and sry for my bad english. here is some screenshots: 

    I am not good at RAM setting but the 'Timings Table' shows there is XMP-1600 profile available so I believe it would be enough to turn on that memory profile in BIOS.

  • [SOLVED]Asus UX32VD, problems with ACPI and Intel video driver

    1. The bigger problem seems to be Intel video driver:
    When xf86-video-intel is installed, screen stays black after booting. By adding "nomodeset" to grub doesn't help. If I don't start gdm while booting, I can boot to command line with "nomodeset".  From command line I tried "startx", but X doesn't start, probably because "nomodeset" has disabled KMS and I've understood that Intel driver needs KMS for GNOME.
    When xf86-video-vesa is installed instead of intel driver, screen is still black. By adding "nomodeset" to grub, I can see only mouse at gdm. If rebooting computer without gdm, I can start gnome from command line with startx and it works nice.
    In both setups I can connect to laptop with ssh when screen is black. With ssh I checked screen brightness, but it was maximum.
    Intel driver version: xf86-video-intel 2.20.1-3
    2. The problem with ACPI is found from dmesg, I don't think this effects to graphics problem, because with vesa driver and "acpi=off" set to grub I can start Gnome with startx. I don't even know if it effects at all on my system, dmesg shows error which effects to displayport( intel_dp_i2c_aux_ch error) these maybe related to each others:
    [ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
    [ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
    [ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120320/psparse-536)
    [ 2.738789] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
    [ 2.741836] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
    There is log files while booting with Intel driver and gdm set to start at boot in rc.conf, the screen is black, but got logs with ssh:
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
    [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
    [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
    [ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
    [ 0.000000] BIOS-e820: 0000000040005000 - 00000000c97be000 (usable)
    [ 0.000000] BIOS-e820: 00000000c97be000 - 00000000c9dbf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000c9dbf000 - 00000000c9dc2000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9dc2000 - 00000000c9dd7000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9dd7000 - 00000000c9ddd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9ddd000 - 00000000c9ddf000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9ddf000 - 00000000c9de4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9de4000 - 00000000c9f3d000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f3d000 - 00000000c9f41000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9f41000 - 00000000c9f8b000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f8b000 - 00000000c9f92000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9f92000 - 00000000c9f94000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f94000 - 00000000c9fb2000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fb2000 - 00000000c9fb5000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fb5000 - 00000000c9fb7000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fb7000 - 00000000c9fce000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fce000 - 00000000c9fd4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fd4000 - 00000000c9fdc000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fdc000 - 00000000c9fdd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fdd000 - 00000000c9fec000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fec000 - 00000000c9fed000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fed000 - 00000000c9ff8000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9ff8000 - 00000000c9ffd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9ffd000 - 00000000ca01c000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca01c000 - 00000000ca01e000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca01e000 - 00000000ca032000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca032000 - 00000000ca033000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca033000 - 00000000ca045000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca045000 - 00000000ca06b000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca06b000 - 00000000ca07f000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca07f000 - 00000000ca080000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca080000 - 00000000ca081000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca081000 - 00000000ca083000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca083000 - 00000000ca084000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca084000 - 00000000ca089000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca089000 - 00000000ca0a1000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca0a1000 - 00000000ca645000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca645000 - 00000000ca8c5000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000ca8c5000 - 00000000ca8ca000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000ca8ca000 - 00000000ca8cb000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca8cb000 - 00000000ca90e000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000ca90e000 - 00000000cad1d000 (usable)
    [ 0.000000] BIOS-e820: 00000000cad1d000 - 00000000caff4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000caff4000 - 00000000cb000000 (usable)
    [ 0.000000] BIOS-e820: 00000000cbc00000 - 00000000cfe00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000012f200000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by American Megatrends
    [ 0.000000] efi: ACPI=0xca894000 ACPI 2.0=0xca894000 SMBIOS=0xf04c0 MPS=0xfd4c0
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
    [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
    [ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
    [ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
    [ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fc2000) (14MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000fc2000-0x0000000001000000) (0MB)
    [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
    [ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ec2000) (14MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002ec2000-0x0000000020000000) (465MB)
    [ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037a46000) (376MB)
    [ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000037a46000-0x0000000037d1b000) (2MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000037d1b000-0x0000000040004000) (130MB)
    [ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040005000-0x000000008ea0f000) (1258MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000008ea0f000-0x00000000be4b2000) (762MB)
    [ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000be4b2000-0x00000000be7b3000) (3MB)
    [ 0.000000] efi: mem19: type=1, attr=0xf, range=[0x00000000be7b3000-0x00000000be7d2000) (0MB)
    [ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000be7d2000-0x00000000be7f1000) (0MB)
    [ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000be7f1000-0x00000000be808000) (0MB)
    [ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000be808000-0x00000000be810000) (0MB)
    [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000be810000-0x00000000be9c4000) (1MB)
    [ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000be9c4000-0x00000000be9ca000) (0MB)
    [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000be9ca000-0x00000000bea2f000) (0MB)
    [ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000bea2f000-0x00000000beb59000) (1MB)
    [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000beb59000-0x00000000beb5b000) (0MB)
    [ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000beb5b000-0x00000000bed30000) (1MB)
    [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000bed30000-0x00000000c8613000) (152MB)
    [ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000c8613000-0x00000000c8617000) (0MB)
    [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000c8617000-0x00000000c90e1000) (10MB)
    [ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000c90e1000-0x00000000c9789000) (6MB)
    [ 0.000000] efi: mem33: type=2, attr=0xf, range=[0x00000000c9789000-0x00000000c9794000) (0MB)
    [ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000c9794000-0x00000000c97be000) (0MB)
    [ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000c97be000-0x00000000c9dbf000) (6MB)
    [ 0.000000] efi: mem36: type=5, attr=0x800000000000000f, range=[0x00000000c9dbf000-0x00000000c9dc2000) (0MB)
    [ 0.000000] efi: mem37: type=3, attr=0xf, range=[0x00000000c9dc2000-0x00000000c9dd7000) (0MB)
    [ 0.000000] efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000c9dd7000-0x00000000c9ddd000) (0MB)
    [ 0.000000] efi: mem39: type=3, attr=0xf, range=[0x00000000c9ddd000-0x00000000c9ddf000) (0MB)
    [ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000c9ddf000-0x00000000c9de4000) (0MB)
    [ 0.000000] efi: mem41: type=3, attr=0xf, range=[0x00000000c9de4000-0x00000000c9f3d000) (1MB)
    [ 0.000000] efi: mem42: type=5, attr=0x800000000000000f, range=[0x00000000c9f3d000-0x00000000c9f41000) (0MB)
    [ 0.000000] efi: mem43: type=3, attr=0xf, range=[0x00000000c9f41000-0x00000000c9f8b000) (0MB)
    [ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000c9f8b000-0x00000000c9f92000) (0MB)
    [ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000c9f92000-0x00000000c9f94000) (0MB)
    [ 0.000000] efi: mem46: type=6, attr=0x800000000000000f, range=[0x00000000c9f94000-0x00000000c9fa1000) (0MB)
    [ 0.000000] efi: mem47: type=5, attr=0x800000000000000f, range=[0x00000000c9fa1000-0x00000000c9fb2000) (0MB)
    [ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x00000000c9fb2000-0x00000000c9fb5000) (0MB)
    [ 0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x00000000c9fb5000-0x00000000c9fb7000) (0MB)
    [ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000c9fb7000-0x00000000c9fce000) (0MB)
    [ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000c9fce000-0x00000000c9fd4000) (0MB)
    [ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000c9fd4000-0x00000000c9fdc000) (0MB)
    [ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000c9fdc000-0x00000000c9fdd000) (0MB)
    [ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x00000000c9fdd000-0x00000000c9fec000) (0MB)
    [ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000c9fec000-0x00000000c9fed000) (0MB)
    [ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x00000000c9fed000-0x00000000c9ff8000) (0MB)
    [ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000c9ff8000-0x00000000c9ffd000) (0MB)
    [ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x00000000c9ffd000-0x00000000ca01c000) (0MB)
    [ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca01c000-0x00000000ca01e000) (0MB)
    [ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x00000000ca01e000-0x00000000ca032000) (0MB)
    [ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca032000-0x00000000ca033000) (0MB)
    [ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x00000000ca033000-0x00000000ca045000) (0MB)
    [ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca045000-0x00000000ca06b000) (0MB)
    [ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x00000000ca06b000-0x00000000ca07f000) (0MB)
    [ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca07f000-0x00000000ca080000) (0MB)
    [ 0.000000] efi: mem66: type=3, attr=0xf, range=[0x00000000ca080000-0x00000000ca081000) (0MB)
    [ 0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000ca081000-0x00000000ca083000) (0MB)
    [ 0.000000] efi: mem68: type=3, attr=0xf, range=[0x00000000ca083000-0x00000000ca084000) (0MB)
    [ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000ca084000-0x00000000ca089000) (0MB)
    [ 0.000000] efi: mem70: type=3, attr=0xf, range=[0x00000000ca089000-0x00000000ca0a1000) (0MB)
    [ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000ca0a1000-0x00000000ca101000) (0MB)
    [ 0.000000] efi: mem72: type=5, attr=0x800000000000000f, range=[0x00000000ca101000-0x00000000ca11b000) (0MB)
    [ 0.000000] efi: mem73: type=6, attr=0x800000000000000f, range=[0x00000000ca11b000-0x00000000ca120000) (0MB)
    [ 0.000000] efi: mem74: type=6, attr=0x800000000000000f, range=[0x00000000ca120000-0x00000000ca126000) (0MB)
    [ 0.000000] efi: mem75: type=6, attr=0x800000000000000f, range=[0x00000000ca126000-0x00000000ca128000) (0MB)
    [ 0.000000] efi: mem76: type=6, attr=0x800000000000000f, range=[0x00000000ca128000-0x00000000ca145000) (0MB)
    [ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000ca145000-0x00000000ca272000) (1MB)
    [ 0.000000] efi: mem78: type=0, attr=0xf, range=[0x00000000ca272000-0x00000000ca5da000) (3MB)
    [ 0.000000] efi: mem79: type=0, attr=0xf, range=[0x00000000ca5da000-0x00000000ca5e0000) (0MB)
    [ 0.000000] efi: mem80: type=0, attr=0xf, range=[0x00000000ca5e0000-0x00000000ca645000) (0MB)
    [ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000ca645000-0x00000000ca702000) (0MB)
    [ 0.000000] efi: mem82: type=10, attr=0xf, range=[0x00000000ca702000-0x00000000ca8ad000) (1MB)
    [ 0.000000] efi: mem83: type=10, attr=0xf, range=[0x00000000ca8ad000-0x00000000ca8b1000) (0MB)
    [ 0.000000] efi: mem84: type=10, attr=0xf, range=[0x00000000ca8b1000-0x00000000ca8c5000) (0MB)
    [ 0.000000] efi: mem85: type=9, attr=0xf, range=[0x00000000ca8c5000-0x00000000ca8c9000) (0MB)
    [ 0.000000] efi: mem86: type=9, attr=0xf, range=[0x00000000ca8c9000-0x00000000ca8ca000) (0MB)
    [ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000ca8ca000-0x00000000ca8cb000) (0MB)
    [ 0.000000] efi: mem88: type=10, attr=0xf, range=[0x00000000ca8cb000-0x00000000ca90e000) (0MB)
    [ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000ca90e000-0x00000000caa58000) (1MB)
    [ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x00000000caa58000-0x00000000cacee000) (2MB)
    [ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000cacee000-0x00000000cacf3000) (0MB)
    [ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x00000000cacf3000-0x00000000cacf7000) (0MB)
    [ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000cacf7000-0x00000000cad04000) (0MB)
    [ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x00000000cad04000-0x00000000cad16000) (0MB)
    [ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000cad16000-0x00000000cad1d000) (0MB)
    [ 0.000000] efi: mem96: type=6, attr=0x800000000000000f, range=[0x00000000cad1d000-0x00000000caff4000) (2MB)
    [ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x00000000caff4000-0x00000000cb000000) (0MB)
    [ 0.000000] efi: mem98: type=7, attr=0xf, range=[0x0000000100000000-0x000000012f200000) (754MB)
    [ 0.000000] efi: mem99: type=0, attr=0x8000000000000000, range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
    [ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
    [ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
    [ 0.000000] efi: mem103: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem104: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem105: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: ASUSTeK COMPUTER INC. UX32VD/UX32VD, BIOS UX32VD.206 06/06/2012
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x12f200 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 100000000 mask FE0000000 write-back
    [ 0.000000] 2 base 120000000 mask FF0000000 write-back
    [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
    [ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
    [ 0.000000] 6 base 0CBC00000 mask FFFC00000 uncachable
    [ 0.000000] 7 base 12F800000 mask FFF800000 uncachable
    [ 0.000000] 8 base 12F400000 mask FFFC00000 uncachable
    [ 0.000000] 9 base 12F200000 mask FFFE00000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000cbc00000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fd7b0] fd7b0
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000cb000000
    [ 0.000000] 0000000000 - 00cb000000 page 2M
    [ 0.000000] kernel direct mapping tables up to cb000000 @ 1fffb000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000012f200000
    [ 0.000000] 0100000000 - 012f200000 page 2M
    [ 0.000000] kernel direct mapping tables up to 12f200000 @ c978e000-c9794000
    [ 0.000000] RAMDISK: 37a46000 - 37d1b000
    [ 0.000000] ACPI: RSDP 00000000ca894000 00024 (v02 _ASUS_)
    [ 0.000000] ACPI: XSDT 00000000ca894088 00094 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000ca8a83b8 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000ca8941b8 141FA (v02 _ASUS_ Notebook 00000013 INTL 20091112)
    [ 0.000000] ACPI: FACS 00000000ca8c2f80 00040
    [ 0.000000] ACPI: APIC 00000000ca8a84b0 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 00000000ca8a8528 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 00000000ca8a8570 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: MCFG 00000000ca8a8638 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000ca8a8678 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a90b8 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a9d60 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a9df8 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
    [ 0.000000] ACPI: SLIC 00000000ca8aa718 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
    [ 0.000000] ACPI: HPET 00000000ca8aa890 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 00000000ca8aa8c8 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000ca8ab150 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: DMAR 00000000ca8abbe8 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000012f200000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000012f200000
    [ 0.000000] NODE_DATA [000000012f1fc000 - 000000012f1fffff]
    [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012a800000-ffff88012e7fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0012f200
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x00020000
    [ 0.000000] 0: 0x00020200 -> 0x00040004
    [ 0.000000] 0: 0x00040005 -> 0x000c97be
    [ 0.000000] 0: 0x000c9dc2 -> 0x000c9dd7
    [ 0.000000] 0: 0x000c9ddd -> 0x000c9ddf
    [ 0.000000] 0: 0x000c9de4 -> 0x000c9f3d
    [ 0.000000] 0: 0x000c9f41 -> 0x000c9f8b
    [ 0.000000] 0: 0x000c9f92 -> 0x000c9f94
    [ 0.000000] 0: 0x000c9fb2 -> 0x000c9fb5
    [ 0.000000] 0: 0x000c9fb7 -> 0x000c9fce
    [ 0.000000] 0: 0x000c9fd4 -> 0x000c9fdc
    [ 0.000000] 0: 0x000c9fdd -> 0x000c9fec
    [ 0.000000] 0: 0x000c9fed -> 0x000c9ff8
    [ 0.000000] 0: 0x000c9ffd -> 0x000ca01c
    [ 0.000000] 0: 0x000ca01e -> 0x000ca032
    [ 0.000000] 0: 0x000ca033 -> 0x000ca045
    [ 0.000000] 0: 0x000ca06b -> 0x000ca07f
    [ 0.000000] 0: 0x000ca080 -> 0x000ca081
    [ 0.000000] 0: 0x000ca083 -> 0x000ca084
    [ 0.000000] 0: 0x000ca089 -> 0x000ca0a1
    [ 0.000000] 0: 0x000ca8ca -> 0x000ca8cb
    [ 0.000000] 0: 0x000ca90e -> 0x000cad1d
    [ 0.000000] 0: 0x000caff4 -> 0x000cb000
    [ 0.000000] 0: 0x00100000 -> 0x0012f200
    [ 0.000000] On node 0 totalpages: 1019347
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 11 pages reserved
    [ 0.000000] DMA zone: 3908 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 806020 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3016 pages used for memmap
    [ 0.000000] Normal zone: 190008 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
    [ 0.000000] PM: Registered nosave memory: 00000000c97be000 - 00000000c9dbf000
    [ 0.000000] PM: Registered nosave memory: 00000000c9dbf000 - 00000000c9dc2000
    [ 0.000000] PM: Registered nosave memory: 00000000c9dd7000 - 00000000c9ddd000
    [ 0.000000] PM: Registered nosave memory: 00000000c9ddf000 - 00000000c9de4000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f3d000 - 00000000c9f41000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f8b000 - 00000000c9f92000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f94000 - 00000000c9fb2000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fb5000 - 00000000c9fb7000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fce000 - 00000000c9fd4000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fdc000 - 00000000c9fdd000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fec000 - 00000000c9fed000
    [ 0.000000] PM: Registered nosave memory: 00000000c9ff8000 - 00000000c9ffd000
    [ 0.000000] PM: Registered nosave memory: 00000000ca01c000 - 00000000ca01e000
    [ 0.000000] PM: Registered nosave memory: 00000000ca032000 - 00000000ca033000
    [ 0.000000] PM: Registered nosave memory: 00000000ca045000 - 00000000ca06b000
    [ 0.000000] PM: Registered nosave memory: 00000000ca07f000 - 00000000ca080000
    [ 0.000000] PM: Registered nosave memory: 00000000ca081000 - 00000000ca083000
    [ 0.000000] PM: Registered nosave memory: 00000000ca084000 - 00000000ca089000
    [ 0.000000] PM: Registered nosave memory: 00000000ca0a1000 - 00000000ca645000
    [ 0.000000] PM: Registered nosave memory: 00000000ca645000 - 00000000ca8c5000
    [ 0.000000] PM: Registered nosave memory: 00000000ca8c5000 - 00000000ca8ca000
    [ 0.000000] PM: Registered nosave memory: 00000000ca8cb000 - 00000000ca90e000
    [ 0.000000] PM: Registered nosave memory: 00000000cad1d000 - 00000000caff4000
    [ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cbc00000
    [ 0.000000] PM: Registered nosave memory: 00000000cbc00000 - 00000000cfe00000
    [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
    [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:28200000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012ee00000 s82880 r8192 d23616 u524288
    [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999936
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3751436k/4966400k available (4538k kernel code, 889012k absent, 325952k reserved, 4307k data, 740k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 1696.208 MHz processor.
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.76 BogoMIPS (lpj=5654026)
    [ 0.000007] pid_max: default: 32768 minimum: 301
    [ 0.000028] init_memory_mapping: 00000000cbc00000-00000000cfe00000
    [ 0.000032] 00cbc00000 - 00cfe00000 page 2M
    [ 0.151118] Security Framework initialized
    [ 0.151124] AppArmor: AppArmor disabled by boot time parameter
    [ 0.151478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.153001] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.153673] Mount-cache hash table entries: 256
    [ 0.153885] Initializing cgroup subsys cpuacct
    [ 0.153888] Initializing cgroup subsys memory
    [ 0.153897] Initializing cgroup subsys devices
    [ 0.153899] Initializing cgroup subsys freezer
    [ 0.153901] Initializing cgroup subsys net_cls
    [ 0.153903] Initializing cgroup subsys blkio
    [ 0.153938] CPU: Physical Processor ID: 0
    [ 0.153940] CPU: Processor Core ID: 0
    [ 0.153946] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.153947] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.154505] mce: CPU supports 7 MCE banks
    [ 0.154520] CPU0: Thermal monitoring enabled (TM1)
    [ 0.154528] using mwait in idle threads.
    [ 0.155909] ACPI: Core revision 20120320
    [ 0.173638] ftrace: allocating 17828 entries in 70 pages
    [ 0.187014] DMAR: Host address width 36
    [ 0.187017] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.187030] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.187033] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.187044] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.187046] DMAR: RMRR base: 0x000000ca395000 end: 0x000000ca3b1fff
    [ 0.187049] DMAR: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff
    [ 0.187125] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.187127] HPET id 0 under DRHD base 0xfed91000
    [ 0.187335] Enabled IRQ remapping in x2apic mode
    [ 0.187337] Enabling x2apic
    [ 0.187339] Enabled x2apic
    [ 0.187348] Switched APIC routing to cluster x2apic.
    [ 0.187829] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.220796] CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz stepping 09
    [ 0.325329] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
    [ 0.325337] ... version: 3
    [ 0.325338] ... bit width: 48
    [ 0.325340] ... generic registers: 4
    [ 0.325342] ... value mask: 0000ffffffffffff
    [ 0.325343] ... max period: 000000007fffffff
    [ 0.325345] ... fixed-purpose events: 3
    [ 0.325347] ... event mask: 000000070000000f
    [ 0.345395] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.365318] Booting Node 0, Processors #1
    [ 0.379062] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.391966] #2
    [ 0.405760] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.418597] #3 Ok.
    [ 0.432328] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.432363] Brought up 4 CPUs
    [ 0.432366] Total of 4 processors activated (13575.06 BogoMIPS).
    [ 0.436881] devtmpfs: initialized
    [ 0.438137] PM: Registering ACPI NVS region [mem 0xc97be000-0xc9dbefff] (6295552 bytes)
    [ 0.438244] PM: Registering ACPI NVS region [mem 0xca645000-0xca8c4fff] (2621440 bytes)
    [ 0.438288] PM: Registering ACPI NVS region [mem 0xca8cb000-0xca90dfff] (274432 bytes)
    [ 0.439159] NET: Registered protocol family 16
    [ 0.439285] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.439288] ACPI: bus type pci registered
    [ 0.439359] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.439363] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.488790] PCI: Using configuration type 1 for base access
    [ 0.489423] bio: create slab <bio-0> at 0
    [ 0.489488] ACPI: Added _OSI(Module Device)
    [ 0.489490] ACPI: Added _OSI(Processor Device)
    [ 0.489492] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.489494] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.492750] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.496137] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.598886] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.599592] ACPI: SSDT 00000000ca5f2018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.600414] ACPI: Dynamic OEM Table Load:
    [ 0.600417] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.600767] ACPI: SSDT 00000000ca5f3a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.601622] ACPI: Dynamic OEM Table Load:
    [ 0.601626] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.601797] ACPI: SSDT 00000000ca5f4c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.602615] ACPI: Dynamic OEM Table Load:
    [ 0.602618] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.603483] ACPI: Interpreter enabled
    [ 0.603488] ACPI: (supports S0 S3 S4 S5)
    [ 0.603522] ACPI: Using IOAPIC for interrupt routing
    [ 0.709320] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    [ 0.709614] ACPI: No dock devices found.
    [ 0.709618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.710040] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.710623] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.710626] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.710629] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.710632] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.710634] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.710637] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.710639] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [ 0.710643] pci_root PNP0A08:00: host bridge window [mem 0xcfe00000-0xfeafffff]
    [ 0.710683] PCI host bridge to bus 0000:00
    [ 0.710686] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.710688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.710691] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.710693] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.710696] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.710698] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.710701] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.710703] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
    [ 0.710714] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.710765] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.710808] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.710842] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.710857] pci 0000:00:02.0: reg 10: [mem 0xf7400000-0xf77fffff 64bit]
    [ 0.710866] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.710873] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
    [ 0.710919] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
    [ 0.710933] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.711023] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.711053] pci 0000:00:14.0: reg 10: [mem 0xf7900000-0xf790ffff 64bit]
    [ 0.711145] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.711176] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.711206] pci 0000:00:16.0: reg 10: [mem 0xf7922000-0xf792200f 64bit]
    [ 0.711301] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.711353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.711380] pci 0000:00:1a.0: reg 10: [mem 0xf7920000-0xf79203ff]
    [ 0.711490] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.711525] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.711543] pci 0000:00:1b.0: reg 10: [mem 0xf7918000-0xf791bfff 64bit]
    [ 0.711626] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.711657] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.711790] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.711831] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 0.711963] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.712027] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.712052] pci 0000:00:1d.0: reg 10: [mem 0xf791f000-0xf791f3ff]
    [ 0.712164] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.712196] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
    [ 0.712346] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.712370] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
    [ 0.712380] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
    [ 0.712391] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
    [ 0.712400] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
    [ 0.712410] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
    [ 0.712421] pci 0000:00:1f.2: reg 24: [mem 0xf791e000-0xf791e7ff]
    [ 0.712480] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.712505] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.712526] pci 0000:00:1f.3: reg 10: [mem 0xf791d000-0xf791d0ff 64bit]
    [ 0.712556] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
    [ 0.712601] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.712629] pci 0000:00:1f.6: reg 10: [mem 0xf791c000-0xf791cfff 64bit]
    [ 0.712761] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
    [ 0.712778] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
    [ 0.712796] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.712814] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.712826] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
    [ 0.712839] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
    [ 0.718669] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.718673] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.718677] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.718681] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.718759] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.719023] pci 0000:03:00.0: [8086:088e] type 00 class 0x028000
    [ 0.719239] pci 0000:03:00.0: reg 10: [mem 0xf7800000-0xf7801fff 64bit]
    [ 0.720103] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.725437] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.725447] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.725477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.725613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
    [ 0.725684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.725749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.725903] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.726168] pci0000:00: ACPI _OSC control (0x18) granted
    [ 1.474997] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
    [ 1.475053] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
    [ 1.475105] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
    [ 1.475156] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
    [ 1.475207] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 1.475258] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 1.475309] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
    [ 1.475359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
    [ 1.475453] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.475460] vgaarb: loaded
    [ 1.475461] vgaarb: bridge control possible 0000:00:02.0
    [ 1.475508] PCI: Using ACPI for IRQ routing
    [ 1.477328] PCI: pci_cache_line_size set to 64 bytes
    [ 1.477339] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
    [ 1.477421] reserve RAM buffer: 000000000009f000 - 000000000009ffff
    [ 1.477423] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
    [ 1.477426] reserve RAM buffer: 00000000c97be000 - 00000000cbffffff
    [ 1.477439] reserve RAM buffer: 00000000c9dd7000 - 00000000cbffffff
    [ 1.477451] reserve RAM buffer: 00000000c9ddf000 - 00000000cbffffff
    [ 1.477462] reserve RAM buffer: 00000000c9f3d000 - 00000000cbffffff
    [ 1.477473] reserve RAM buffer: 00000000c9f8b000 - 00000000cbffffff
    [ 1.477484] reserve RAM buffer: 00000000c9f94000 - 00000000cbffffff
    [ 1.477494] reserve RAM buffer: 00000000c9fb5000 - 00000000cbffffff
    [ 1.477504] reserve RAM buffer: 00000000c9fce000 - 00000000cbffffff
    [ 1.477514] reserve RAM buffer: 00000000c9fdc000 - 00000000cbffffff
    [ 1.477523] reserve RAM buffer: 00000000c9fec000 - 00000000cbffffff
    [ 1.477532] reserve RAM buffer: 00000000c9ff8000 - 00000000cbffffff
    [ 1.477540] reserve RAM buffer: 00000000ca01c000 - 00000000cbffffff
    [ 1.477548] reserve RAM buffer: 00000000ca032000 - 00000000cbffffff
    [ 1.477556] reserve RAM buffer: 00000000ca045000 - 00000000cbffffff
    [ 1.477563] reserve RAM buffer: 00000000ca07f000 - 00000000cbffffff
    [ 1.477569] reserve RAM buffer: 00000000ca081000 - 00000000cbffffff
    [ 1.477575] reserve RAM buffer: 00000000ca084000 - 00000000cbffffff
    [ 1.477581] reserve RAM buffer: 00000000ca0a1000 - 00000000cbffffff
    [ 1.477586] reserve RAM buffer: 00000000ca8cb000 - 00000000cbffffff
    [ 1.477590] reserve RAM buffer: 00000000cad1d000 - 00000000cbffffff
    [ 1.477593] reserve RAM buffer: 00000000cb000000 - 00000000cbffffff
    [ 1.477596] reserve RAM buffer: 000000012f200000 - 000000012fffffff
    [ 1.477696] NetLabel: Initializing
    [ 1.477698] NetLabel: domain hash size = 128
    [ 1.477699] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.477713] NetLabel: unlabeled traffic allowed by default
    [ 1.477738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.477746] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.479760] Switching to clocksource hpet
    [ 1.485853] pnp: PnP ACPI init
    [ 1.485869] ACPI: bus type pnp registered
    [ 1.486219] pnp 00:00: [bus 00-3e]
    [ 1.486224] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 1.486226] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 1.486229] pnp 00:00: [io 0x0d00-0xffff window]
    [ 1.486231] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 1.486234] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 1.486236] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 1.486238] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 1.486241] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 1.486243] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 1.486246] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 1.486248] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 1.486250] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 1.486253] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 1.486255] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 1.486257] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 1.486260] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 1.486262] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 1.486264] pnp 00:00: [mem 0xcfe00000-0xfeafffff window]
    [ 1.486267] pnp 00:00: [mem 0x00010000-0x0001ffff window]
    [ 1.486345] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 1.486376] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 1.486418] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 1.486422] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.533253] pnp 00:02: [io 0x0000-0x001f]
    [ 1.533255] pnp 00:02: [io 0x0081-0x0091]
    [ 1.533257] pnp 00:02: [io 0x0093-0x009f]
    [ 1.533259] pnp 00:02: [io 0x00c0-0x00df]
    [ 1.533262] pnp 00:02: [dma 4]
    [ 1.533297] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.533306] pnp 00:03: [mem 0xff000000-0xffffffff]
    [ 1.533336] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.533438] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 1.533473] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.533487] pnp 00:05: [io 0x002e-0x002f]
    [ 1.533489] pnp 00:05: [io 0x004e-0x004f]
    [ 1.533491] pnp 00:05: [io 0x0061]
    [ 1.533493] pnp 00:05: [io 0x0063]
    [ 1.533495] pnp 00:05: [io 0x0065]
    [ 1.533497] pnp 00:05: [io 0x0067]
    [ 1.533498] pnp 00:05: [io 0x0070]
    [ 1.533500] pnp 00:05: [io 0x0080]
    [ 1.533502] pnp 00:05: [io 0x0092]
    [ 1.533504] pnp 00:05: [io 0x00b2-0x00b3]
    [ 1.533506] pnp 00:05: [io 0x0680-0x069f]
    [ 1.533508] pnp 00:05: [io 0x0200-0x020f]
    [ 1.533510] pnp 00:05: [io 0xffff]
    [ 1.533512] pnp 00:05: [io 0xffff]
    [ 1.533514] pnp 00:05: [io 0x0400-0x0453]
    [ 1.533518] pnp 00:05: [io 0x0458-0x047f]
    [ 1.533520] pnp 00:05: [io 0x0500-0x057f]
    [ 1.533522] pnp 00:05: [io 0x164e-0x164f]
    [ 1.533573] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 1.533576] system 00:05: [io 0x0200-0x020f] has been reserved
    [ 1.533579] system 00:05: [io 0xffff] has been reserved
    [ 1.533581] system 00:05: [io 0xffff] has been reserved
    [ 1.533584] system 00:05: [io 0x0400-0x0453] has been reserved
    [ 1.533587] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 1.533590] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 1.533592] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 1.533596] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.533606] pnp 00:06: [io 0x0070-0x0077]
    [ 1.533620] pnp 00:06: [irq 8]
    [ 1.533653] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.533685] pnp 00:07: [io 0x0454-0x0457]
    [ 1.533733] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 1.533737] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.533764] pnp 00:08: [io 0x0010-0x001f]
    [ 1.533767] pnp 00:08: [io 0x0022-0x003f]
    [ 1.533769] pnp 00:08: [io 0x0044-0x005f]
    [ 1.533771] pnp 00:08: [io 0x0072-0x007f]
    [ 1.533773] pnp 00:08: [io 0x0080]
    [ 1.533774] pnp 00:08: [io 0x0084-0x0086]
    [ 1.533776] pnp 00:08: [io 0x0088]
    [ 1.533778] pnp 00:08: [io 0x008c-0x008e]
    [ 1.533780] pnp 00:08: [io 0x0090-0x009f]
    [ 1.533782] pnp 00:08: [io 0x00a2-0x00bf]
    [ 1.533784] pnp 00:08: [io 0x00e0-0x00ef]
    [ 1.533786] pnp 00:08: [io 0x04d0-0x04d1]
    [ 1.533836] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 1.533840] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.533849] pnp 00:09: [io 0x00f0-0x00ff]
    [ 1.533858] pnp 00:09: [irq 13]
    [ 1.533892] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.533945] pnp 00:0a: [irq 12]
    [ 1.533982] pnp 00:0a: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 1.534008] pnp 00:0b: [io 0x0060]
    [ 1.534010] pnp 00:0b: [io 0x0064]
    [ 1.534017] pnp 00:0b: [irq 1]
    [ 1.534053] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 1.534293] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
    [ 1.534295] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
    [ 1.534297] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
    [ 1.534300] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
    [ 1.534302] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
    [ 1.534304] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
    [ 1.534306] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
    [ 1.534308] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
    [ 1.534310] pnp 00:0c: [mem 0xff000000-0xffffffff]
    [ 1.534313] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
    [ 1.534315] pnp 00:0c: [mem 0xcfe00000-0xcfe00fff]
    [ 1.534382] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.534385] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.534388] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.534392] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.534395] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.534398] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.534401] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.534404] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.534407] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
    [ 1.534413] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.534416] system 00:0c: [mem 0xcfe00000-0xcfe00fff] has been reserved
    [ 1.534420] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.534494] pnp 00:0d: [mem 0xcfe00000-0xcfe00fff]
    [ 1.534558] system 00:0d: [mem 0xcfe00000-0xcfe00fff] has been reserved
    [ 1.534562] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.534715] pnp 00:0e: [mem 0x20000000-0x201fffff]
    [ 1.534718] pnp 00:0e: [mem 0x40004000-0x40004fff]
    [ 1.534783] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.534786] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
    [ 1.534790] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.534823] pnp: PnP ACPI: found 15 devices
    [ 1.534824] ACPI: ACPI bus type pnp unregistered
    [ 1.541624] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfe08000-0xcfe0ffff 64bit]
    [ 1.541631] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.541634] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 1.541638] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 1.541642] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 1.541647] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.541662] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.541670] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
    [ 1.541716] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.541719] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.541721] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.541724] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.541727] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.541729] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.541732] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.541734] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff]
    [ 1.541737] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 1.541739] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
    [ 1.541742] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 1.541745] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
    [ 1.541791] NET: Registered protocol family 2
    [ 1.541920] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 1.542713] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 1.544194] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.544343] TCP: Hash tables configured (established 524288 bind 65536)
    [ 1.544346] TCP: reno registered
    [ 1.544359] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.544378] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.544464] NET: Registered protocol family 1
    [ 1.544482] pci 0000:00:02.0: Boot video device
    [ 1.579823] PCI: CLS 64 bytes, default 64
    [ 1.579868] Unpacking initramfs...
    [ 1.651952] Freeing initrd memory: 2900k freed
    [ 1.652345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.652349] Placing 64MB software IO TLB between ffff8800ba4b2000 - ffff8800be4b2000
    [ 1.652351] software IO TLB at phys 0xba4b2000 - 0xbe4b2000
    [ 1.652909] audit: initializing netlink socket (disabled)
    [ 1.652920] type=2000 audit(1343310419.543:1): initialized
    [ 1.653295] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.655215] VFS: Disk quotas dquot_6.5.2
    [ 1.655264] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.655387] msgmni has been set to 7683
    [ 1.655586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 1.655616] io scheduler noop registered
    [ 1.655619] io scheduler deadline registered
    [ 1.655674] io scheduler cfq registered (default)
    [ 1.655790] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
    [ 1.656047] efifb: probing for efifb
    [ 1.658527] efifb: framebuffer at 0xd0000000, mapped to 0xffffc9000a200000, using 3072k, total 3072k
    [ 1.658530] efifb: mode is 1024x768x32, linelength=4096, pages=1
    [ 1.658532] efifb: scrolling: redraw
    [ 1.658534] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.661755] Console: switching to colour frame buffer device 128x48
    [ 1.664865] fb0: EFI VGA frame buffer device
    [ 1.664872] intel_idle: does not run on family 6 model 58
    [ 1.664905] GHES: HEST is not enabled!
    [ 1.664976] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.665554] Linux agpgart interface v0.103
    [ 1.665643] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 1.667162] i8042: Detected active multiplexing controller, rev 1.1
    [ 1.668312] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.668346] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.668370] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.668392] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.668415] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.668518] mousedev: PS/2 mouse device common for all mice
    [ 1.668581] rtc_cmos 00:06: RTC can wake from S4
    [ 1.668727] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 1.668756] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.668766] cpuidle: using governor ladder
    [ 1.668768] cpuidle: using governor menu
    [ 1.668897] TCP: cubic registered
    [ 1.669011] NET: Registered protocol family 10
    [ 1.669206] NET: Registered protocol family 17
    [ 1.669210] Registering the dns_resolver key type
    [ 1.669345] PM: Hibernation image not present or could not be loaded.
    [ 1.669352] registered taskstats version 1
    [ 1.669923] rtc_cmos 00:06: setting system clock to 2012-07-26 13:47:00 UTC (1343310420)
    [ 1.670074] Initializing network drop monitor service
    [ 1.671692] Freeing unused kernel memory: 740k freed
    [ 1.671810] Write protecting the kernel read-only data: 8192k
    [ 1.677537] Freeing unused kernel memory: 1588k freed
    [ 1.680114] Freeing unused kernel memory: 640k freed
    [ 1.688393] systemd-udevd[48]: starting version 186
    [ 1.702336] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.729878] usbcore: registered new interface driver usbfs
    [ 1.729905] usbcore: registered new interface driver hub
    [ 1.729967] usbcore: registered new device driver usb
    [ 1.730626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.730703] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.730709] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.730735] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.730768] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.733581] SCSI subsystem initialized
    [ 1.734651] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.734672] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7920000
    [ 1.735298] libata version 3.00 loaded.
    [ 1.742916] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.743591] hub 1-0:1.0: USB hub found
    [ 1.743601] hub 1-0:1.0: 2 ports detected
    [ 1.743896] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.743903] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.743919] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.743958] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.747853] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.747877] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf791f000
    [ 1.756260] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.756431] hub 2-0:1.0: USB hub found
    [ 1.756436] hub 2-0:1.0: 2 ports detected
    [ 1.756777] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 1.756784] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.756817] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 1.756946] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.756957] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7900000
    [ 1.757034] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
    [ 1.757594] xHCI xhci_add_endpoint called for root hub
    [ 1.757598] xHCI xhci_check_bandwidth called for root hub
    [ 1.757646] hub 3-0:1.0: USB hub found
    [ 1.757657] hub 3-0:1.0: 4 ports detected
    [ 1.757744] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.757751] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 1.757848] xHCI xhci_add_endpoint called for root hub
    [ 1.757851] xHCI xhci_check_bandwidth called for root hub
    [ 1.757894] hub 4-0:1.0: USB hub found
    [ 1.757905] hub 4-0:1.0: 4 ports detected
    [ 1.759643] ahci 0000:00:1f.2: version 3.0
    [ 1.759745] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.759829] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
    [ 1.759836] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 1.759845] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.766833] scsi0 : ahci
    [ 1.766937] scsi1 : ahci
    [ 1.767022] scsi2 : ahci
    [ 1.767101] scsi3 : ahci
    [ 1.767184] scsi4 : ahci
    [ 1.767262] scsi5 : ahci
    [ 1.767498] ata1: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e100 irq 44
    [ 1.767503] ata2: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e180 irq 44
    [ 1.767505] ata3: DUMMY
    [ 1.767507] ata4: DUMMY
    [ 1.767508] ata5: DUMMY
    [ 1.767510] ata6: DUMMY
    [ 2.049225] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 2.085851] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.085878] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.086220] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.086306] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.086310] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.086526] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.086607] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.086610] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.086623] ata2.00: ATA-9: SanDisk SSD i100 32GB, 11.50.00, max UDMA/133
    [ 2.086626] ata2.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32)
    [ 2.087041] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.087128] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.087131] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.087143] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
    [ 2.087146] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.087320] ata2.00: configured for UDMA/133
    [ 2.087589] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.087650] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.087669] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.087920] ata1.00: configured for UDMA/133
    [ 2.088043] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
    [ 2.088297] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD i100 11.5 PQ: 0 ANSI: 5
    [ 2.093498] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
    [ 2.093608] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.093612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.093648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.093819] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
    [ 2.093913] sd 1:0:0:0: [sdb] Write Protect is off
    [ 2.093919] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.093951] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.095497] sda: sda1 sda2
    [ 2.095893] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.096681] sdb: sdb1 sdb2 sdb3
    [ 2.096999] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 2.173153] hub 1-1:1.0: USB hub found
    [ 2.173332] hub 1-1:1.0: 6 ports detected
    [ 2.227030] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.332228] usb 3-3: new high-speed USB device number 2 using xhci_hcd
    [ 2.359348] usb 3-3: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 2.359354] usb 3-3: ep 0x3 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 2.415509] systemd-udevd[144]: starting version 186
    [ 2.465386] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 2.465658] [drm] Initialized drm 1.1.0 20060810
    [ 2.468971] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 2.482290] ACPI: Lid Switch [LID]
    [ 2.483112] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 2.483119] ACPI: Power Button [PWRB]
    [ 2.484540] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 2.484548] ACPI: Sleep Button [SLPB]
    [ 2.488074] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
    [ 2.488698] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 2.491571] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 2.491779] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 2.494298] ACPI: Requesting acpi_cpufreq
    [ 2.507995] i915 0000:00:02.0: setting latency timer to 64
    [ 2.530014] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.530018] ACPI: Thermal Zone [THRM] (52 C)
    [ 2.530047] ACPI: AC Adapter [AC0] (on-line)
    [ 2.532019] Monitor-Mwait will be used to enter C-1 state
    [ 2.532089] Monitor-Mwait will be used to enter C-2 state
    [ 2.532122] ACPI: acpi_idle registered with cpuidle
    [ 2.555771] ACPI: Battery Slot [BAT0] (battery present)
    [ 2.561573] wmi: Mapper loaded
    [ 2.564667] iTCO_vendor_support: vendor-support=0
    [ 2.565251] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 2.568922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 2.569169] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.569279] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.584441] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.587955] MXM: GUID detected in BIOS
    [ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
    [ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
    [ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120

    Sometimes with Intel driver I can see mouse while loading gdm, but then it goes to black.
    I tried to boot with Intel driver with "drm.debug=14" and "log_buf_len=16M"  as boot parameters. There is debug log from gdm, it seems to have some errors, I have not yet looked deeble on it:
    gnome-session[1269]: DEBUG(+): Enabling debugging
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/Louis-laptop:@/tmp/.ICE-unix/1269,unix/Louis-laptop:/tmp/.ICE-unix/1269
    gnome-session[1269]: DEBUG(+): GsmShell: Not connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: setting client store 0xe4e070
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
    gnome-session[1269]: DEBUG(+): fill: *** Getting session 'gdm-shell'
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/local/share/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/usr/local/share/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/lib/gnome-session/gnome-session-check-accelerated'' to know if session is runnable
    gnome-session[1269]: DEBUG(+): fill: *** Checking required components and providers
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): fill: *** Done checking required components and providers
    gnome-session[1269]: DEBUG(+): fill: *** Adding required components
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
    gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
    gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
    gnome-session[1269]: DEBUG(+): fill: *** Done adding required components
    gnome-session[1269]: DEBUG(+): fill: *** Adding default providers
    gnome-session[1269]: DEBUG(+): fill: *** Done adding default providers
    gnome-session[1269]: DEBUG(+): GsmManager: GSM starting to manage
    gnome-session[1269]: DEBUG(+): GsmManager: App startup summary
    gnome-session[1269]: DEBUG(+): GsmManager: Phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App2 app-id:gnome-settings-daemon.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1269]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: Phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: Phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: Phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App1 app-id:gnome-shell.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
    gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/lib/gnome-settings-daemon/gnome-settings-daemon startup-id=10bba787d7390cc455134324418397061300000012690001
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1279
    gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418445168000000012690002 to session
    gnome-session[1269]: DEBUG(+): uid = 120
    gnome-session[1269]: DEBUG(+): pid = 1360
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
    gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient 10bba787d7390cc455134324418397061300000012690001
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418397061300000012690001 to session
    gnome-session[1269]: DEBUG(+): uid = 120
    gnome-session[1269]: DEBUG(+): pid = 1279
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): App gnome-settings-daemon.desktop registered
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
    gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=10bba787d7390cc455134324418396973400000012690000
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1369
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase RUNNING
    gnome-session[1269]: DEBUG(+): GsmPresence: adding idle watch
    gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
    gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Setting up new connection
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: New client '0xe99030 []'
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Initializing client 0xe99030 []
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 []' received RegisterClient(10bba787d7390cc455134324418396973400000012690000)
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418396973400000012690000 to session
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Set properties from client '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: ProcessID = '1369'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: handling signal 15
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
    gnome-session[1269]: DEBUG(+): Got callback for signal 15
    gnome-session[1269]: DEBUG(+): GsmManager: Logout called
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: requesting logout
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase RUNNING
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): Caught signal 15, shutting down normally.
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Done handling signals
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, 9, 32771, 0)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: query end session complete
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, c, 32771, 0)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase END_SESSION
    gnome-session[1269]: DEBUG(+): Using ConsoleKit for session tracking
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase EXIT
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]')
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received CloseConnection
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe99030
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000])
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: unable to find application for client - not restarting
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe7ff30
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe9b020
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: last client disconnected - exiting
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase EXIT
    gnome-session[1269]: DEBUG(+): Unreffing manager
    gnome-session[1269]: DEBUG(+): GsmManager: disposing manager
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece830
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece910
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    (gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    (gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    PolicyKit daemon disconnected from the bus.
    We are no longer a registered authentication agent.
    g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Window manager warning: Log level 16: gnome-shell: Fatal IO error 0 (Success) on X server :0.

  • PS CS4 problems with OpenGL drawing enabled

    I've just upgraded from PS CS3 to PS CS4 (default 32 and 64 versions) and I'm having problems with seeing image files above a certain size (even moderate size) with OpenGL Drawing enabled. Disabling OpenGL Drawing results in very slow image display (very easy to see the blocks being drawn one at a time), much slower than with PS CS3.
    I'm running Vista 64 with latest updates. I'm trying to get PS CS4 32 running properly first, but PS CS4 64 seems to be having similar problems.
    GeForce 9600 GT video card with latest driver 178.24 (updated yesterday and rebooted many times since then). That card is in Adobe's list of tested cards.
    Main monitor (where I display Photoshop images) selected as primary in the driver dialog.
    I put palettes/panes on my 2nd monitor.
    I use Ultramon for 2nd monitor taskbar functionality. Turning Ultramon off doesn't seem to help, although I may need to disable Ultramon from launching on reboot.
    No plugins installed yet in PS CS4 (32), as per Adobe kb advice.
    4GB of RAM with Memory Usage set within Photoshop's Ideal Range.
    For testing, I've been opening a few different size (px and bytes) RGB image files in Photoshop by dragging them from an Explorer window into the Photoshop window, then clickin in the Photoshop window to make Photoshop active and show its palettes.
    First with OpenGL Drawing enabled in Performance, default Advanced Settings.
    JPEG, 3600 x 2600 px, 4.5MB
    - opens and displays ok (short delay before palettes appear)
    - zooms and rotates smoothly
    TIFF, 2 layers, 800 x 600 px, 16 bits, 2.5MB
    - opens and displays ok (short delay before palettes appear)
    - zooms and rotates smoothly
    TIFF, 1 layer, 3600 x 2600 px, 16 bits, 54MB
    - doesn't open properly, shows checkerboard instead of image, with checkerboard in navigator and layer icon in layers pane
    - histogram is fine
    - zooming and rotation are not smooth (jumps to new position/size)
    - duplicate layer caused PS CS4 to stop working, with a close program dialog
    - open PS CS4 32 again, no OpenGL message today, and OpenGL Drawing is still enabled (although I got the OpenGL Drawing message more than once yesterday)
    TIFF, several layers, 3600 x 2600 px, 16 bits, 306 MB
    - doesn't open properly, shows checkerboard instead of main image
    - icons in layers pane look fine, same as navigator image
    - checkerboard zooms and rotates smoothly
    - duplicate layer is still checkerboard, back one history state stopped working / close program dialog
    - started PS again, opened 1 layer TIFF, closed and tried to open multi layer TIFF again, but stopped working / close program dialog again
    I then tried the same images with OpenGL Drawing disabled in Performance.
    3600 x 2600 px JPEG
    - ok, but slow, blocky redraw
    2 layer 800 x 600 px TIFF
    - ok, but slight delay in redraw (smallest of all the files, both in px and bytes)
    1 layer 3600 x 2600 px TIFF
    - opened ok, but slow, blocky redraw
    multi layer 3600 x 2600 px TIFF
    - opened ok, but slow, blocky redraw
    From what I've read in various Adobe kb notes, it sounds like there's some kind of conflict with my video driver, but I haven't been able to figure it out. I even tried the registry plugin from the Adobe kb to disallow OpenGL Windows, but that didn't seem to make any difference. It didn't even stop me being able to select and use OpenGL Drawing in PS CS4.
    Any help would be much appreciated. I'm tearing my hair out here and I'm feeling a bit like I've blown my money on the upgrade so far.

    I had another look at PS CS4 64 and those smaller (by file size) images that I can see with OpenGL Drawing on rotate and resize in a jumpy way, not smoothly like in PS CS4 32.
    The multi layer TIFF that showed the images in at least the layers pane and navigator when using PS CS4 32 only shows the checkerboard in the layers pane and navigator in PS CS4 64.
    Either way, neither version is anywhere near working properly.
    Oh yeah, and I made a typo on the RAM. It's 6GB and not 4GB, not that I think that would make any difference.

  • Photoshop found a problem with display drive ??

    Friends,
    Now I have the Photoshop CS4 working but everytime it starts, it gives me the messege that the GPU enhancement is disabled. If I try to go to performance to enable it, the program crashes ????
    I'm using aa ASUS EAH4850 and I have 5.9 sorce in Vista 32 H-Premium.
    Can anyone please help.
    I'm sure it's not a DEP problem as I just installed the CS4 on another PC with an old Graphic card, without even touching the performance settings and it worked perfectly and the Photoshop CS4 detected and used the graphic card.
    What's the problem ?
    Please I need help.
    Thanx.

    Hello Chris,
    Well, after what I did yesterday, updating the ATi 4850 drive to the latest, and updating the 11.0.1 of Photoshop CS4, everything went ok and the CS4 detected the Graphic card.
    Today, I was asked for updates (Creative Suite CS4) and once the updates were over and installed, Photoshop went back to it's old story !!
    Now everytime I start it, it gives me that error of GPU, and if I try to go to preference or General the program crashes.
    I already enabled the graphic card in preference yesterday..
    Now I really don't know what to do.... Shall I re install the 11.0.1 update ?
    Thanx for the great help..

Maybe you are looking for

  • How do I convert an Imovie to wmv file?

    I created a imovie and tried to upload to you tube but the file type was not compatible with you tube applications.  Wmv files are, is there a way to convert imovie to wmv?  If not, is there a proceedure to upload an imovie so that it will work on yo

  • Need help with formatting a number

    hi all, the problem i am having has been a hot topic over time in java. i have an integer say 123. i want to convert this to a string of 10 characters. how do i pad the first seven spaces with blanks. ex. " 123" in c++ you can use sprintf. how do i d

  • How much data does facetime use over wifi? on 5gb mifi

    so can any1 tell me how much or how long facetime hours/minutes will i get out of my 5gb wireless mifi (wi-fi)

  • Hardware Inventory Not collecting Reg Keys with the Underscore Character

    We expanded hardware inventory to collect custom reg keys dynamically (from the child keys). While the new WMI class on the machine is able to see all the custom keys, SCCM is not collecting the ones with the underscore ('-') character in the name. D

  • Optical Surround not working in Macbook pro

    I have a MBP 15" 2.33GHz core 2 duo, and I would like to use surround (DTS or Dolby 5.1) in logic pro. I do not have a audio hardware, but I read here I can use the (digital) optical output to hear 5.1 output. Well, I plugged the optical out to a Pio