OpenHub - unable to change the extraction mode in DTP

Hi there,
I have an Open Hub that is loaded from two InfoCubes and I need to change the DTPs from both of them.
The problem is that Iu2019m unable to change the extraction mode of both DTPs from Delta to Full in spite of having deleted the Open Hub table. Even I have deleted the requests from the InfoCubes, but itu2019s not working.
What else I have to do to change the extraction mode? Are there any other tables I should delete first?
Thanks!!

hi Rocio.
Yes i think u can achieve this using an Init DTP load.
first try to run an Init DTP , Init Without Data Transfer, select it from the Execute tab of processing Mode and then try to run the delta DTP without any load, then successive can be done.
hope this will help u.
thanks

Similar Messages

  • Unable to change the Extract structure

    Hi All,
    In LBWE in R/3, I need to the change the extract structure MC02M_0HDR for DataSource 2LIS_02_HDR, by including some fields using the maintenance tab, After doing the required changes when i give "continue", the system is throwing me the following error -
    <b>"Struct. from appl. 02 due to open V3 proc. not changed".</b>.
    The long text of the error message shows -
    Diagnosis
    Changing the extract structure MC02M_0HDR of application 02 is not recommended as there are no V3 update entries for the update module MCEX_UPDATE_02.
    If an extract structure is changed for which there are still open V3 updates, these can no longer be updated and the V3 collective update is terminated.
    Procedure
    Start the V3 update and delete those update entries that are already incorrect. You will find these in the update overview.
    Kindly reply me as soon as possible in this regard.
    Regards,
    Manickavasagan

    Hello,
    in transaction sm37 in the source system, you will find a job starting with LIS-BW-VB_APPLICATION*. Please select the job related to your application and in the menu Job->Delete, delte the same which is in the released state ready to be executed.
    then you can go ahead and enhance the extract structure.
    Hope it helps.
    thanks

  • Unable to change the operating mode in informatica admin tool.

    hi
    i have installed Informatica 8.6.0
    my repository service is running . and i have also created the integration service but its not running, the reason as i fount out in various blogs is that my repository is iin exclusive mode .
    so , i tried to change it to normal mode . but the problem is as i select normal in the drop-down list in general properties operating mode option and click ok , nothing's happening a and the page error is coming as shown below:
    Can't move focus to the control because it is invisible ,not enabled or of a type that does not accept the focus
    Is this an error of internet explorer ??? i am using IE 7.or are there any options that i need to enable???
    what should i do in this case???
    plz help !!!!
    Edited by: Nikhil.S on Jun 8, 2011 3:37 AM
    Edited by: Nikhil.S on Jun 8, 2011 3:41 AM

    I got the same error and after I tested with firefox and everything.. I found out the issue (in my case):
    - Under Database properties, The value for "ConnectString" property contains a space at the end.
    -Example "host.oracle.com "
    - Solution: I remove the space at the end , save it, and Now I can modify the operatingmode to Exclusive
    Edited by: hcamacho on Jun 24, 2011 1:53 PM

  • Changing the Document Mode to IE9

    I exported my Captivate project for HTML5, and the project works on my MAC and PC, but when testing it on another co-workers computer using IE9, she was unable to play the project, index.html. When she opened index.html, this is the response she received in her browser,
    "The content you are trying to view is not supported in the current Document Mode of Internet Explorer. Change the Document Mode to Internet Explorer 9 Standards and try to view the content again.
    To change the Document Mode, press F12, click Document Mode: , and then select Internet Explorer 9 Standards."
    Is this something I can change in the CSS document within the project folder?
    Any advise would be helpful.

    IE9 is not all that HTML5 ready.  I would recommend you output for both HTML5 and HTM/SWF when you publish.  If you do, you should see a file called Multiscreen.html.  Ask your coworker to try that file instead.

  • My MacBook Pro speakers are stopped working and on screen volume icon shows in gray colour I am unable to change the volume.

    My MacBook Pro speakers are stopped working and on screen volume icon shows in gray colour I am unable to change the volume.

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers.
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
        Try this even if you don’t see the red light.
    3. Reset PRAM.  http://support.apple.com/kb/PH14222
        Do this twice
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the appropriate method.
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so,uncheck it.
    6. System Preferences > Sound> Sound Effects
        Play sound effects through:
       Select "Internal speakers" and then back to "Selected sound output device".

  • My itouch 4th gen refuses to switch off and i am unable to change the volume.  Can you help?

    my itouch 4th gen refuses to switch off and i am unable to change the volume.  Can you help?

    - Have you tried resetting the iPOd:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next connec the iPod to its syncing computer and try to restore the iPod.
    - The if still same. place the iPod in recovery mode and then try to restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • Any problem in changing the update mode.

    Hi Gurur's,
                    We have set Unserialized V3  update mode  in R/3 production for 2lis_03_bf.
                    We are getting '0' records while running delta.
                    Now can we change the update mode to queued delta and run and for that what are the precautionary steps to be done.And will be the effect if we done like that happen.
    Cheers,
    Satish.M.R.

    Hi Satish
    The diffrence between these 2 update modes are
    Queued Delta:With this update mode, the extraction data is collected for the affected application instead of being collected in an extraction queue, and can be transferred as usual with the V3 update by means of an updating collective run into the BW delta queue. In doing so, up to 10000 delta extractions of documents for an LUW are compressed for each DataSource into the BW delta queue, depending on the application.
    unserialized V3:With this update mode, the extraction data for the application considered is written as before into the update tables with the help of a V3 update module. They are kept there as long as the data is selected through an updating collective run and are processed. However, in contrast to the current default settings (serialized V3 update), the data in the updating collective run are thereby read without regard to sequence from the update tables and are transferred to the BW delta queue.
    Please go through the below article
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5039632a-c398-2d10-0aaf-97167a3de753?QuickLink=index&overridelayout=true
    You will get clear idea about how the data flow differs in this 2 update modes
    Hope this helps
    Regards,
    Venkatesh

  • EA6900 - Unable to Change to Bridge Mode or Reset router Via Smart Wi-fi

    I am unable to change to Bridge mode to do a reset of the router from within the software. There is no option to change it to Bridge.  And under Diagnostics, there is no option to Reset.  I am trying first and foremost to set the IP scheme to the same as my DSL router. I would rather not put it in Bridge mode.  I have tried setting the IP out of the range of the DSL router, and within the same scheme.
    It does not work.  This is the most current version of the firmware.

    Hi Dr. Tek, You can try to reset the router for 30 seconds and power cycle it after. Try to access the Linksys Smart Wi-Fi software again and check if you can change the connection type to bridge mode. You can also use another internet browser to isolate the problem.

  • Unable to change the data in PSA

    Hello All,
    I have a delta failure because of invalid characters in one of the field and now i wanted to change the PSA. I have deleted the request from all data targets and started changing the error record, it is not showing all columns from PSA hence i am unable to change the data in required field.
    Could you please let me know how will i see all columns from PSA. Thanks
    Regards,Ashok

    Hi Ashok,
    To increase/decrease the number of columns that are displayed on the menu from the Settings option select Change display variants
    Also if you want to see say all the failed records you can sort the order of the data using the Status column

  • Unable to change the data source of SAP system

    Dear all,
    We have install SAP netweaver EHP1 standalone java on oracle 10.2.0.5 on windows 2008 R2.
    while installation i have given the central SLD system as solman,
    By mistake i have deleted the system from SMSY.. now when i createed the system manually i am unable to change the data resource as SLD due to this i can start my SMD configuration
    Request please let me know how to resolve this issue.
    Thanks
    Paresh

    Hi Paresh,
    You can proceed with deleting your SAP system from SMSY (along with connected technical content such as AS Java definition) and the run the LANDSCAPE FETCH through transaction SMSY_SETUP to have the correct definition of your SAP system in SMSY.
    Following this, you could use the addon Landscape Verification (a new thing I learnt today!!!)  to check the correctness of transaction SMSY. The following link details the Landscape verification 1.0 for SolMan:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e093b3ce-c034-2d10-01bc-b51f1691d3da?quicklink=index&overridelayout=true
    Hope this helps sort out your issue.

  • I have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

    i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

    i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

  • I changed my Apple ID for an iphone 4s and need to change the iCloud Apple ID/password.  I am unable to change the Apple ID under the iCloud account information without the password which no longer exists.  How can I update my phone?

    I had to change the Apple ID used for my iphone 4s.  How do I change the Apple ID for the iCloud information? - the old Apple ID/password no longer exists and this information is requested to make a change.  I am unable to change the Apple ID for the iCloud account.

    Apple IDs never go away, so it still exists.
    But lets be clear. You actually stopped using an Apple ID and created a NEW Apple ID. You didn't just change the email address of your Apple ID? That means that all of the music and apps purchased with the old Apple ID will have to be purchased again.
    If you really did create a new Apple ID you will need the password associated with the old one to disable Activation Lock. There is no way around this. As I said, the old one still exists. You can use the standard tools to recover the password at https://appleid.apple.com.

  • How can I get my installed plugins to show up in Logic after ive installed the plugin discs? ive tried changing the bit mode. it STILL doesn't work.???

    I tried installing a program but when i open logic and scan the audio units, it doesnt come up. Even if i change the bit mode, it still doesnt show up. I even tried restarting my machine..Can anyone help me or give me some ideas.
    i just wanna get this plugin to work.

    Have you confirmed that the plug-in installed to one of the locations where Logic might find it? Most plug-ins go to /Library/Audio/Plug-ins/Components. Some (rarely) install to ~/Library/Audio/Plug-ins/Components (where "~" is your user folder). Look in both locations and see if the plug-in is actually there.
    When installing plug-ins, if you are offered options as to what format to install, be sure to include Audio Units. Logic will not see other formats like VST, RTAS, AAX, TDM, etc. If you use other software that recognizes those formats, it's fine to install them too, just be sure you don't deselect Audio Units.
    Finally, if you're sure the plug-in is installed to the right place, open the Audio Units Manager in Logic and check to see if the plug-in passed validation. Go to the main menu and choose Logic Pro > Preferences > Audio Units Manager. Check to see if your plug-in is listed there. If there's not a check mark next to it in the "Logic" column, that means it failed validation. If so, the "Compatibilty" column will tell you why. Keep in mind that if the AU is 32-bit, you have to launch Logic in 32-bit mode to see it here. Likewise, 64-bit plug-ins show up in the manager in 64-bit mode.

  • Unable to change the entries in SM30

    Hi all,
    In my program i am inserting records using MODIFY DBTAB.
    COMMIT WORK.
    After the prog execution i hv to change the entries in the DBTAB.
    I am unable to change the created records.
    Can u pls explain me what is happening here?
    Thanks in advance
    Praveen

    To be able to use SM30 to modify any data in a database table you need to have a maintenance dialog generated for that table.
    If you have one generated depending on the type of the dialog (maintenance allowed with restrictions) you will still not be able to modify the data.
    If you need to change data through SM30 you should either create (or change to maintenance allowed without restrictions) and regenerate the table maintenance dialog. Make sure that the existing dialog doesn't have any customization to it because that will all be lost after regeneration.
    The other option to change the data is would be through SE16 and debugger or through a program.
    Hope that helps,
    Michael

  • Unable to change the status of a project to approved

    Dear Members,
    I am using the Oracle Vision Instance version 12.1.3 and Database 11.2.0.3.0
    I have created a project. I am unable to change the status of the project to APPROVED. I am getting the below error:-
    Please enter an active project manager for this project in order to change or update this information._
    Can any one please help me in resolving this issue.
    Many thanks in advance.
    Regards.

    R4S wrote:
    Dear Members,
    I am using the Oracle Vision Instance version 12.1.3 and Database 11.2.0.3.0
    I have created a project. I am unable to change the status of the project to APPROVED. I am getting the below error:-
    Please enter an active project manager for this project in order to change or update this information._
    Can any one please help me in resolving this issue.
    Many thanks in advance.
    Regards.Please see these docs.
    CMRO Partially Implemented Visit Errors with "Please enter an active project manager for this project in order to change or update this information" [ID 864812.1]
    Update_Project Erroring With PA_PR_INSUF_PROJ_MGR While Creating Task For Templates [ID 1085068.1
    Thanks,
    Hussein                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Maybe you are looking for