Opening 6.0 projects in CS3 Premiere Pro

I am planning on up grading my editing system and I am currently evaluating the latest version of Premiere VS switching to a Mac and final cut.
When I attempt opening previous projects edited on 6.0 I get the Message:
The editing mode used by this project could not be loaded. The project will be opened in Desktop mode.
Do you have any suggestion on how I can open my previous projects?
Thanks
Robert Jackson
System Information:
Adobe Premiere 6.0
Matrox Video Tools version: 3.1.0.2127b
Matrox RT2500
Dell Dimension 8300
Intel ® Pentium 4 CPU 3.00GHz, 2.99 GHz, 200.GB of Ram
XP Professional Version 2002 Service Pack 2
(c) 120GB Serial ATA Hard Drive, 7200RPM ST3160811AS
(d) Maxtor 120GB 7200RPM 8MB SATA/150 3.5" Hard Drive 6Y120MO
(e) External Maxtor OneTouch III Turbo Edition, Terabyte Hard Drive, RAID

There may not be a way to do what you desire. I don't think Matrox supplies any drivers for the 2500 working with CS3. Without them, it's no surprise things don't work correctly.

Similar Messages

Why AE project files in Premiere Pro Project Manager collection of files?

Am I missing something? I can't seem to find any information as to why a AE project file is collected by Premiere Pro CC 2014. I realize that I I'm using AE Comps within Premiere Pro (Dynamic Link). I have always wished that Premiere Pro would "collect" any AE projects being used. But apparently Premiere Pro just collect the AE project file...
If I open the AE project file that Premiere Pro "collected" it still has to locate its resources on my machine, and I also now have two copies of the same AE project file. Nothing gained for me. I still have to "collect" the AE project file which creates yet another copy of the same AE project file... I makes no sense to me and I hope I'm missing a step or overlooking something...
Ideally it would nice if PPro would somehow communicate with AE and have AE collect the project and send it over to Premiere Pro to include in its "collection" of resources.
Am I missing something here?
Thanks in advance,
Lou

Discovered another issue. If I'm using multiple AE comps in PPro, PPro generates several AE project files, on for each Comp. If I go back into my PPro collected project file it references those specific AE files. That means I have to collect each of those new AE project files that PPro generated... In addition, PPro won't let me change those references within the PPro collected project file to the original AE project file. What a headache! There has to be another way. Is that the way I'm going to have to collect projects from both PPro and AE now??

Open Adobe Premiere Pro CC 2014 project in Adobe Premiere Pro CC

Hi everyone,
Did somebody knows how to open Adobe Premiere Pro CC 2014 project in Adobe Premiere Pro CC ?
Best regards, Alex

This method is not good for me, because I lost stuff like titles with its settings of motions and effects (I try to open my templates for video clips ).
Maybe there is another way to do it ?

I am trying to open a previous completed project made on premiere pro CC 2014. i am getting a message that says the project was made on a newer version and cannot be opened on my new computer. However i made the older project on the same premiere pro CC 2

I am trying to open a preciously completed project mad eon premiere pro CC 2014. I purchased a new computer and downloaded the same premiere pro cc 2014. However when i try to open my old project it says the project was made on a newer version and cannot open.
that makes no sense...i downloaded the same version of premiere pro CC...help please!

Hi,
Seems that you don't have the most recent version installed right now. After launching Premiere Pro go to Help > Updates and check if any updates are available.
Thanks,
Rameez

Converting AE project into Adobe Premiere Pro project.

I have found the way to convert AE project into Adobe Premiere Pro project.
I use the following line of code:
app.executeCommand(app.findMenuCommandId("Adobe Premiere Pro Project ..."));
It works. But unfortunately it opens the SaveFileDialog window for the file name to be assigned.
I'd love not to see this window. I'd love to assign the file name programmatically. It would be great!
Is there any way to prevent the dialog window from opening?
Thank you.

Depends if you are on the cloud or not or the new 12.0 version. One way to do it is to import your AE footage into PP as pending on your puter....
Important to tell your version and OS when posting. What seems clear at your end is being asked from someone who has not seen your challenge.

Options for exporting a project in Adobe premiere Pro CS5.5

When Exporting a project from Adobe premiere Pro CS5.5 I use the format of Windows Media file and Preset HDTV 1080P 30 HighQuality. At the bottom of the window there are some options that say "Use Maximum Render Quality" And "Use Frame Blending". I used these two options on my first video I exported but I want to know for the future what both of these options do exactly to my film and if they could adversely effect things like lighting and the frame rate of a clip or anything?

Max Render Quality does what is says: gives better picture quality, but will lengthen the export process.
Frame Blending you check when output framerate differs from timeline framerate.

FAQ: Can I open my Adobe Premiere Clip project in Adobe Premiere Pro?

Yes. When you are ready to export your project to Premiere Pro, begin by tapping the share button in the upper right corner of your screen. Next, simply tap the Edit in Premiere Pro button. Within a few minutes, this will send your project and media to your Creative Cloud folder. Open up Premiere Pro on your computer, and from the Welcome Screen select the option to “Convert Premiere Clip Project” under the “New” heading. Next, choose the project XML file you wish to continue editing in Premiere Pro. All of your project edits will show up in your Premiere Pro timeline, making it easy to continue working.

Since PrPro project is an XML file, you can open it up in any script editor (e.g. Adobe ExtendScript Toolkit) or even text editor, in fourth line find Version="25"
<?xml version="1.0" encoding="UTF-8"?>
<PremiereData Version="3">
<Project ObjectRef="1"/>
<Project ObjectID="1" ClassID="62ad66dd-0dcd-42da-a660-6d8fbde94876" Version="25">
and replace it with Version="23".
Although it works just fine most of the time, bear in mind: everything is at your own peril.

Errors opening a project in Adobe Premiere pro CC 2014 from previous version

Hello!
I have a problem with Adobe Premiere Pro CC 2014. I use Adobe to edit my film project and from the last time I updated the CC to CC 2014, it shows me an error message (Pic nr 1). When I want to continue and save that, Premiere CC 2014 shows me another message(Nr 2). but next time when I want to open that, it's impossible ... (Nr 3).
I didn't change or remove anything. The problem started after I updated the program. Even now that I want to open the project with previous version of CC 2013, its showing me the same errors...
Do someone have any idea about it?
Thanks

Try this:
Error "This project contained a sequence that could not be opened"

Opening a project edited in Premiere Pro 6 with Premiere Pro CC

I am trying to open a project that was produced in Premiere Pro 6 and when I try to open it I get the following warning “This project contained a sequence that could not be opened no sequence preset or codek could be associated with the sequence type.” Any fixes?

1st, you burn a disc using Encore, not PPro... the links below may help
Adobe and 3D http://forums.adobe.com/thread/1229799
-and http://forums.adobe.com/thread/831871
-w/3rd party tools in Encore http://forums.adobe.com/thread/1286644

Cant open project file with premiere pro 7.2.2

Hi, i have a big problem. I can't open a premiere pro project on a mac pro (10.9.2) with premiere cc 7.2.2 (33). Yet it is working on a mac book pro (10.9.2) with Premiere cc 7.0.0 (342). Is there a way to downgrade premiere ? Please help. Thanks

Hi DB Films,
See this article: Revert to a previous version of any Creative Cloud application
Thanks,
Kevin

Premiere Elements project imported into Premiere Pro CS5.5 becomes unusable after first save

I have Premiere Pro CS5.5, and I have been trying for some time to successfuly edit an old project that was originally created in Premiere Elements (not sure which version--probably 7.0). It has the .prel extension. The project imports just fine, and I am able to edit it initially. However, if I save my new Premiere Pro project, close Pr and try to open the new project again, I get the "The project could not be loaded, it may be damaged or contain outdated elements." error message. I have tried many of the various project recovery suggestions people have made in this forum and elsewhere online, but none of them seem to work. I even opened the project in XML Wrench, but there were no errors returned when I clicked "check is well formed." Once I close the project after doing some initial editing, it is gone. Is this a known issue? Is there any way I can be able to edit the old project in Pr and save my work? Thanks!

Have you tried using the project manager to re-copy all elements and timeline etc into a totally new directory. I'm just curious to see if that would make a difference. I'd be intrested to see if when making a new project in this manor if it would because as you have stated the normal save methods haven't.

How to transfer and use the project files from Premiere Pro cs6 MAC OS to Premiere Pro CS6 Windows

Is there any plugin or tool that can help me to transfer my project files along data edited on adobe premiere cs6 MAC OS to the adobe premiere pro cs 6 on windows PC

When transferring a project from one computer to another,to stop errors such as these, its essential to ensure that the project is copied with all the files and folders in exactly the same locations. Also before opening the project on the new computer, you need to set up a new project and set all the preferences to be exactly the same as on the first computer. Then when you open the project, premiere will find all the files in all the right places. Even then you may need to re-link some files. Just follow the prompts when Premiere asks "Where is file...."
We use USB hard drives to store students projects on and they are used on many different computers without problems, as the preferences are all set to be the same.

CS3 Premiere Pro - export to Encore settings closes PP

OS = XP, SP2
Adobe CS3 Master Collection
Capture = Matrox RT.X2 LE (MxTools ver. 3.6.0.145)
Video = Matrox QID LP PCIe
Hi,
This a new install of CS3, first project.
When exporting a full sequence to Encore from Premiere, selecting the "Settings" button causes Premiere Pro to close with no error messages.
If I accept the default settings, the export continues as normal and creates the files.
Single Layer chosen
Encoding Settings - Preset: NTSC Medium Quality
Defaults come up as;
NTSC, 720x480, 29.97 non-drop frame [fps]. Lower, Quality
3.0
48kHZ, 16 bit, Stereo, PCM
VBR, 1Pass, Min 1.50, Target 4.00, Max 7.00 [Mbps]
It's a very simple program in SD, 4:3 aspect, 93.5 minutes in length with a few still frames (jpg or bmp at 720x480) inserted. No audio or video effects processing. I'd like to tweek the settings or adjust the edited program if necessary for best/better quality.
Is this a known issue, am I missing something simple? I can't seem to find any theads (or Kb) pertaining to this.
Any ideas or solutions greatly appreciated.
Thanks.

I do not recall a lot of issues in CS3, that were specific to Matrox, but CS4 and its updates pointed up tons of issues with Matrox drivers. Matrox had play "catch up" with every iteration of the CS4 updates. However, there almost always seem to be some issue with Matrox and Adobe, so that would be a likely "candidate," as Harm points out. It might not be the correct one, but would be worth a look with a test on a totally non-Matrox Project.
It seems that when everything (and I do mean everything) is set up perfectly at all levels, the Matrox cards work well for many, even with PrPro, but there are just so many, who have little problems in the setup (drivers, etc.) and things go south in a big hurry.
Please report your findings, as they will likely help others.
Good luck,
Hunt

Why does my entire computer freeze while opening or using After Effects or Premiere Pro CS5?

Just built a computer to meet all requirements for Adobe, Autodesk 3ds Max, and UDK, for school.
Specs;
Motherboard - ASRock X79 Extreme 4-M, Socket 2011 - Micro ATX - 4 DDR3 1600/1333/1066/800 - 3 PCI-E 3.0 x 16 - 7.1 CH HD Audio - PCIE GLAN - 3 SATA3 - eSATA3 - 4 SATA2 - 4 USB 3.0 - 10 USB 2.0
Processor - Intel Core i7 Processor - i7-3820 LGA 2011
Processor fan - Intel Thermal Solution RTS2011 AC
RAM - Ballistix by Crucial - 2x 8GB Tactical PC3 - 12800 CL8 1.5 VW/XMP = 16GB RAM
SSD - Crucial M4 SSD 128GB - Comptatibility with 6Gb/s & backward compatible with SATA 3Gb/s
HDD - Seagate Barracuda 1TB - 7200 RPM up to 32mb cache
Power Supply - Cooler Master Extreme Power Plus 700W
Graphics Card - EVGA - NVIDIA GeForce GTX480 - DirectX11 - CUDA - OpenCL Support - PhysX Technology - OpenGL 4.1 (so says the box it came in; but if I'm not mistaken I think the command prompt had shown OpenGL 3 or 3.2)
Disc Driver - LG DVD/CD RW... It is an OEM, Windows claims it is updated.
I use an external component - USB Microsoft Wireless Mouse & Keyboard 2000.
I have, as far as software goes...
Windows 7 64-bit SP1
Adobe Creative Suite 5, student version or what have you.
- I do have several plugins installed as well for After Effects only.
Autodesk 3ds Max 2012
-I have several maxscripts as well as a couple plugins for 3ds Max.
UDK 2-2012 & 3-2012
NVIDIA PhysX Lab 1.1
NVIDIA Texture Tools 2
NVIDIA plugin for Photoshop
xNormal
ConTEXT
UnCodeX
Quicktime
AVG Free
Malwarebytes
7-Zip
Java
Sculptris
As for anything else giving me issues I haven't noticed anything besides a previous Graphics Card wasn't supported very well at all with 3ds Max, it would freeze while using the material editor which was fixed with replacing a GTX550 ti with a more compatible GTX480. Thought maybe the upgrade would also solve the fact that almost everytime I go to start up and/or use After Effects or Premiere Pro CS5 my whole system freezes. Whether or not I'm doing anything, it occasionally happened during "Scrubbing" the timeline, but also during the splash load up screen. Would take the time to wait for several minutes but nothing would change. Hard reboot was needed. After countless hours of searching online I stumbled upon what is called an "Unlock" for Premiere Pro/After Effects to allow accelerated GPU and CUDA cores. Simple procedure, seems as if things go faster... When it is working. But still, I encounter freezes on my entire system. It isn't a crash back to Windows or anytihng. Just a complete freeze on the entire system. I have not extensively used other Adobe programs besides Photoshop quite briefly just so I could open menus and force a freeze within 5 minutes and noticed nothing wrong. Which in AE & PP just running through any of the menu windows can quickly cause a sudden freeze.
note* I have alternated shutting off and turning on OpenGL as well as multiprocessing. Doesn't matter, it really doesn't seem to change much of anything.
Alas, I am absolutely sure, after checking and re-checking 80+ hours over the past 2 weeks that yes, everything is updated as far as each individual program, software or hardware will allow me to update them. I have reinstalled Windows as well as each program up to 3 times, and 1 system (restore?) I had Windows dump everything, started from scratch, backed up nothing. To reinstall everything from scratch, while not installed several "Utilities" or software components from stuff like the Motherboard and its XFAST USB/LAN or whatever, thinking maybe it was cluttering up anything.
Please, if anyone has any ideas upon this and could give me advice, whether you notice any other incompatibilities or anything. Any and all advice would be greatly appreciated. Thank you.
note* I do not have a wired Keyboard or mouse to disable the USB plugin and attempt that route.. at least not yet, its on my list of things to do. Also, I did run Memtest86+ during a boot and it claims that everything there had passed 100%. I am not "overclocking" anything either. I just wanted something I could work smoothly on, that would have decent rendering capabilities. I used to use my girls' laptop which was an HP with 3GB RAM and never experienced crashes or freezes and I could use AE, PPro, 3ds Max with some lag but not any issues. Rendering took forever on it, but I usually avoided that 'cuz it would start heating up pretty fierce. Saved my rendering for school computers where I could. But either way, now I have this expensive piece and it is getting frustrating that I cannot work on it.
note* Also, incase it does help, I have Windows as well as any major components installed onto the C: drive (aka SSD for my system) while all my secondary software, such as Adobe, Autodesk, etc. are all installed directly to my D: drive (or HDD) And everything is set up to go through Windows Firewall as well.

Thanks all. I have just tried a few things, installing them onto the C drive as you all specified as not being one of them. I can understand it, but at the same time i have a classmate who has their software on a seperate drive and it runs smoothe. I'm on my second GPU in 2 weeks, unless I have terrible luck it seems doubtful being that I can run games and a majority of the software no problem. Through further testing around with a corded mouse and keyboard I've noticed the following...
The computer freezes entirely only when I'm performing a "scrubbing" action or using a mouse. Left clicking, scrolling, or moving it around. Otherwise if I do not use the mouse and I make all my actions, such as "scrubbing" in AE via "Page Up & Down" keys, there's no freeze and it preloads the preview no problem.
"Scrubbing" does not load a preview (the green bar doesn't load at all while scrubbing). But, also noticed no matter how smoothe everything is running in 3ds Max as well as PPro, once I start performing a "scrubbing" action with whatever timeline I use, it will definately freeze my whole computer, Windows and all. Hard reboot is neeed.
With having gone through 2 GPU's, done a full memtest via Windows 7 and Memtest86+, there seems to be no issue with my memory or GPU. Like I said, I've run UDK without an issue. Whether the editor or game. The USB doesn't seem like it's the cause, I've used both wireless as well as wired keyboards/mouse. Still freezes, but now only when using a mouse to "Scrub".
Is it possible my motherboard could be incompatible somewhere? I mean, really.. everything is brand new but 2 weeks of troubleshooting.
And I do plan on trying to run my software off the C drive, I just wanted to make sure it wasn't something else, like I said, I've seen and used a computer where it all runs off the D drive and it runs perfectly, actually better on his computer than off the C drive at my schools. So if it is an issue would it lie within the fact that I'm using an Nvidia GPU? Considering my classmate is using a AMD/ATI Radeon or something like that.
Again, to those who replied, your shared knowledge is greatly appreciated, thank you.

Full Project Screen in Premiere Pro 2.0

Hello, my imported videos do not occupy the full project screen. They show up as small windows inside the screen. When the same videos are viewed in Windows Media Player, they play fine (full screen). The titles that I created in Premiere are fine, full screen. What am I doing wrong? Thanks for your help.

I personally have 0 experince with Premiere 2.0 so I can't promise the advice I'm going to give you will apply. However all you need to do is pick a sequence setting that is 320x240 and your footage will be full screen. Try watching this video.
http://video.answers.com/how-to-customize-presets-and-modifying-project-settings-in-adobe- premiere-pro-86619268
http://premierepro.wikia.com/wiki/FAQ:How_do_I_change_the_project_settings%3F
according to the one article though you can't change it right off the bat inside 2.0 although I cant promise this info is correct. It does however say you can change it you just have to do it differently. Please check out these links.
The issue is though that I'm not positive your version of Premiere is going to allow to use custom sequence settings. I don't have any personal experince with this old a version of premiere. However you might be able to create a new sequence by dragging your footage onto the new sequence icon that is inside your project bin. If you watch the videos on the site I gave you a link to you can figure this out.

Opening 6.0 projects in CS3 Premiere Pro

Similar Messages

Maybe you are looking for