Opening a document in iwork numbners 09 in the cell you saved it
If you save a numbers'09 document for example in the cell "C1234", the next time you open it will be in the cell "B40".
What do I have to do for opening a numbers'09 document exactly in the cell where I was working the last time I save it. I have lost a lot of time going to the cell I need for working.
This do not occur in Excel. If you save a worksheet, the next time you open it it will be exactly in the same place you left it the last time you were working with it.
Your help will be very important. Thanks.
There was a thread about this a long while back. I am guessing you have the scale set to something other than 100%. At 100% it should open at the same place you saved it. At other than 100% it will open at some other spot. However, the cell you left at will be the selected cell when you open the document. All you have to do is use one of the arrow keys and it will take you to it (plus or minus a column or row due to the use of the arrow key).
Similar Messages
-
My X1 version of Adobe no longer opens bank documents -"later version of Stratia required". Can you assist please?
Sorry but what is your answer to my enquiry?
-
In Firefox 29 center clicking at the top of a tab in a maximized window will open a previously closed tab instead of closing the tab you clicked.
Is this this the intended behavior? And if so is there any way to disable it?
ThanksMiddle-clicking a tab closes it, while middle-clicking an empty area of the tab bar opens a new tab.
Different behavior is probably caused by a tab-related add-on like Tab Mix Plus. If you're not sure if you have such an add-on, restart Firefox with add-ons disabled and check if the problem still occurs.
* [[Troubleshoot Firefox issues using Safe Mode]] -
Having installed Aperture, iPhoto won't open. When I try it fails with the message "You can't open the iPhoto.app because it may be damaged or incomplete. Any help please?
OK, fixed it. Found that iPhoto is now BACK in the App store.
Found iPhoto app in Finder and dragged it to Trash.
Downloaded iPhoto from App store and all now back working again.
Didnt expect to find iPhoto in App store as last time I looked it wasn't available.
Nige -
After updates to Pages and several other applications I received an update to Mavericks 10.9, all of which were downloaded and uploaded to my MacBook Pro. After the uploads I created a document in Pages which I saved to my folder. Now when I try to open it I get a message that says I need the latest version of Pages to open this document. What do I need to do to reload the last update to Pages so I can open my document?
In both cases you have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Judging from sterling r's response Apple has not only managed to confuse all its users, but also itself.
Note: Apple has removed over 90 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter -
I have downloaded the most recent version of pages and now my computer refuses to open my documents saying Ihave to download the most recent version of pages. What can I do?
Post the first 50 lines only of the crash report
Regards
TD -
I was on a chat with Anil who was away so long, I thought he was done with me. However. He did not provide me an answer. I was away from my computer for a minute and then he ended the chat. It has no information about my problem. How can I contact someone in person. I can find no phone number for Adobe. Chat is below. The product is InDesign CC 2014, which I explained to the person I was chatting with. I need to speak to someone in person if you are unable to solve my issue. Thanks.
Info: You are now chatting with Anil Kumar.
Anil Kumar: Hello! Welcome to Adobe Customer Service.
loyce Powell-hopkins: Do I need to retype the problem all over again?
Anil Kumar: Hi Loyce.
info: Your chat transcript will be sent to [email protected] at the end of your chat.
Anil Kumar: Loyce, could you please elaborate the issue more clearly?
loyce Powell-hopkins: Hello. Just get me some help. I have a critical issue. Document has been saved in a trial version of Idd CC14 which expired some time ago. Why did this happen. Now I am unable to open the document with Creative Suite IdD 6. the trial converted all of this document, just today to Idd CC 14. I don't want to pay $29 to get my document opened.
Anil Kumar: Thank you for elaborating the issue.
Anil Kumar: May I know the product your are referring to?
Anil Kumar: Are we still connected?
Anil Kumar: Since we have not heard from you for some time, we will now end this chat. Please click to chat with us again if we can be of further assistance.
Anil Kumar: Thank you for contacting Adobe. We are available 7 days a week, 24 hours a day. Goodbye!1 - moved so the InDesign experts may be able to help
2 - as far as I know, you will not be able to open a newer file in an older InDesign program... but, see #1 above -
Opening a document with its default application on the client
In 6i I use Win_API_Shell.StartFile("path\file", WIN_API.SW_SHOWNORMAL, TRUE);
to open a document with it's default windows application. How is this done in 10g?
Do I use webutil? and could someone supply me an example. Again, the document
would be on the local machine, or a mapped drive, not on the app server.
I know I could probably use client_host('start ....') but is there a better way?
Thanks in advance.Hi!
In Forms 10g you have to use webutil for this. No way...
Why do you think that client_host ( 'cmd /C start path\file.sfx' )
or
webutil_host.nonblocking ( 'cmd /C start path\file.sfx' ) is not a good way?
Regards
Edited by: Magoo on 05.09.2009 13:15 -
Why are objects in tables removed when opening a document (created in pages 2009) in the new pages?
I have a problem: Documents I created in Pages 2009, when opened in the new Pages I get "objects in tables were removed".
This makes all my documents useless !
Is there any way to get the objects (images and tables mostly) to load into the tables across all my documents ?No, there isn't. Use Pages 09 with your old documents and Pages 5.0 for creating new ones. Do you really need Pages 5.0 is the question you need to answer. If not, don't.
-
Help - I cant get the docs I created in pages on my ipad to open on my MAC. I've used iCloud, emailed to myself - all I get is "You need a newer version of Pages to open this document.". But my MAC has the newer version!
I have Pages for iOS 2.0.1 on my iPad and Pages '09 (4.3) on my Macbook Pro.
I haven't upgraded anything in the past few months. Still on OS 10.8.5.
Suddenly, something has changed.
If I open a new Pages doc on my iPad and later try to open it on my Mac, I get the error message saying I need a newer version of Pages.
Also, if I open an existing doc on the iPad (one that I've worked on repeatedly from both devices) I get the same message. A couple did open, but only if I hadn't touched them on the iPad. Anything opened today on the iPad won't open on the Mac.
I can open and edit these docs in the Pages beta at www.icloud.com but not on my Mac.
I don't want Mavericks and a new version of Pages now (I'm in the middle of a major project and have learned not to make major upgrades until major things are finished).
For now, the best I can do is open docs in iCloud, copy all, and paste into a new Word doc. Yes, back to Word. Thought I was finished with Microsoft.
Is there a better solution?
JS -
Hi there! I am recently on Maverick & the latest version of PAGES. I just went to open up a PAGES document & got the following error message.
You need a newer version of Pages to open this document.
You can download the latest version of Pages form the Mac App Store.
I confirmed I am on the latest version of Pages by visiting the Mac App Store. When I visit it says INSTALLED.
I created this document with the latest version of Pages.
Any help would be greatly appreciated! Thanks so much & continue Being Brilliant out there!Hi there fruhulda,
Thanks so much for your reply. I am truly grateful. I apologize in advance for just learning this now & from you! Thank you again! Your explanation sounds right? I defintely did not change those. Currently, I already have documents created in Pages 09 & Pages 5.0 on my computer. Do I switch back & forth or should I remove Pages 09 from my computer? If I remove Pages 09 will those already created documents be OK? Maybe I should just switch back? I also downloaded the new Keynote, will however I "fix" Pages be necessary for Keynote also?
Thanks again so much!! People like you make the world a brighter place!! : ) StaySm:)ing & Being Brilliant!! -
While opening specific Document "Not enough Memory" while rendering the Document with Large Image
When Opening a PDF-File with a Large Image, the Adobe Reader and Acrobat will Crash while rendering with the Message Out of Memory.
After some investigations this error is reproducable on Windows 2008 R2 and 2012 R2 Machines running on HP ProLiant BL460c Gen8.
The Servers are updated with the latest Firmware from HP.
This error does not occure on a Virtual Machine running Windows 2008 R2, so it seems like a Hardware dependent Bug.
When disabling the Option Show large Images, the error will not Show up. But this is neither a solution nor a workarround, as we Need to Display all Information in the PDF.
Thanks for any HelpHello SumitV
Thanks for your answer.
Indeed the Output File can be opened without any Errors. It's a good workarround, but it's not a solution.
Why does it work (and much faster) on a Virtual Machine, but not on a very Powerful HP Machine?
I hope Adobe will investigate in this case to solve it completely.
We have a test machine where we could install some debug tools, are there any to get a deeper analysis of this problem?
Thanks a lot. -
I have removed all spyware, anti virus software and removed all iTunes programs - as suggested by Apple. I still cannot open iTunes on my PC because of the message "you do not have permission to open this file, folder"
I have changed and checked all permissions to allow this but still get the same message.
iTunes is located on my C drive and I now do not have the neccesary permissions to open it.Hey Chris-
It has been some time since you posted this message and I see you haven't gotten any replies, but I have the same issue and I was wondering if you figured out how to resolve it. Hopefully you were able to figure it out. -
I have Pages version 2.1 for the i-pad. I have Pages on my Macbook, version 4.3. When I try to ipen a doc on my Mac it says I need a newer version to open this doc. There is no newer version. I need these docs in a bad way and cant get to them on the Mac. Any ideas?
IOS Pages 2.0 and 2.1 implement an entirely incompatible document format with Pages ’09 v4.3. It cannot open them, and you are then prompted to update to Pages v5+ which is compatible with your IOS Pages.
Unfortunately, updating to Pages v5+ is a bad thing, as it is a brand new application that has omitted over 90+ features from Pages ’09 v4.3. When you update to Pages v5+, it will move your old still functional version of the earlier Pages into /Applications/iWork. Aside from all the missing functionality, Pages v5+ will likely damage older documents that depend on specific Pages ’09 v4.3 features (including AppleScript and custom Templates).
Oh, by the way, the older and new Pages documents have the same filename extension (.pages) making document organization difficult without applying different tag colors to old and new documents.
We are recommending that users remain on their earlier Pages version. You may have to export documents from IOS Pages as Word .docx to avoid the OS X Pages update notice. -
Updated Pages today - created a document. Went back few hours later to send it as email attachment - got a message saying Pages needs to be updated to open. Went to Mac app page and it said it was updated. Document won't open - what do I do???? Keeps saying to upgrade but it is upgraded - ARGH!
Here is a possible solution.
You should still have Pages 4.3, the old version, on your computer in Applications>iWork09. If you have the old Pages 4.3 running when you open the file, Pages 4.3 will warn you that you need to update because the new Pages uses a different file format. You can open the file in two ways.
Quit Pages 4.3, then open the file.
Right-click the file and choose to open the file in Pages 5.0.
I hope this helps.
Maybe you are looking for
-
ActionListener Problem - Event not triggering properly
Hello, I have slight problem ith action listeners. Below is an exercise from a book on java i'm reading. I have constructed rectangle with 3 circles inside. When the button in one panel is pushed the colors of these cicles should change from green,bl
-
My iPod shuffle is not being recognized by my computer. It is flashing orange and when plugged in with the original USB cable nothing happens to show the computer recognizes it.
-
how do i submit the ALV output of the current progrm to the spool with the syntax SUBMIT demo_list_output TO SAP-SPOOL SPOOL PARAMETERS pripar ARCHIVE PARAMETERS arcpar WITHOUT SPOOL DYNPRO. my task is to con
-
Routing counter to PFI line/ not routing counter to any external port - How is it done?
Hi! I am using a counter to create a sample clock for digital output. The counter looks just like the one in the example attached. I now discovered that the counter frequency is routed to PFI12 of my NI6259. I don´t know why, I haven´t done this. I d
-
I just received my MacBook Pro back from Apple (they had to replace a faulty hard drive). They installed Leopard on it, but there is no Dashboard anywhere on my machine. I archived and installed Leopard again from my personal Leopard DVD, but still,