Opening a FCP7 Project in FCP X

How do you open a previous Final Cut Pro project in Final Cut Pro X??????

A totally new app with the same name and and incremental number identifier (although missing two)... should therefore be safe to assume that one can import old projects.
Imagine the **** storm that would kick up if Microsoft Word 2012 couldn't import old word documents!!

Similar Messages

Newbie Question: Why can't I open my iMovie project in FCP?

Hello all--
I'm sure some variation of this question has been posted a bajillion times but I can't seem to find the answer. At this point I feel like a damsel in distress. Rescue me?
I've been working with iMovie for about two years now and I've recently been learning Final Cut Pro to up the ante on my videos. However, when I tried to import an iMovie project into FCP yesterday, it didn't quite work. Let me explain what I did and what happened:
1) I exported my (edited but previously unpublished) iMovie project by clicking Share>Export Final Cut XML
2) I opened FCP and clicked File>Import>XML and then selected the XML, leaving all the boxes checked
3) FCP imported the project as a sequence; however, the entire sequence reads "Media Offline" in the Canvas.
4) I clicked File>Reconnect Media and the list of offline files is overwhelming. I tried my luck by clicking "locate" and going to my imovie folders to find the clips, but even when the browser allowed me to select a clip, when I double clicked it, nothing in the sequence changed - it's all still "offline."
I really don't know much about media management, I'll admit - I'm wondering if maybe iMovie saves edited clips in a folder other than the events or originals folder - maybe the edited clips become "temporary items"? I know I have a ridiculous amount of imovie cache and temporary items and I never touch them because there are just so many of them and I don't want to mess anything up. But could the files that FCP claims to be "offline" in fact be located in these "temporary" folders? I mean, I've looked everywhere else on my hard drive and nothing is working! Sorry, I am probably just confusing myself MORE (and you), but maybe SOMEONE will know what in the world I should do
Thanks in advance.

Welcome to the family. I don't think many of us have ever used iMovie so your post might be more quickly answered in that forum.
My suggestion is to forget trying to move the project. Rebuild it in FCP. The exercise will teach you much more about your new software than fighting XML.
If you don't feel like doing that, try a smaller iMovie project, something with only two or three clips and one dissolve.
The larger issue is probably how iMovie stores its captured media which is completely different from how FCP does it. And the format is different. FCP does not, IIRC, view iMovie's default dvstream codec. You will want to export your movie clips as DV.
bogiesan
Message was edited by: David Bogie Chq-1 correct fifth grade typos

Can't open an FCE project in FCP

I got FCE 4.0.1 and have now upgraded to FCP 6.0.1. When I try to open my existing FCE project in FCP, I get a message that says, " File's format is too new for this version of application."
I just bought the FCS, so I assume it's the latest version of the program.
Any ideas?

The latest version of Final Cut Pro is 6.0.5.
Use the software updater to get to that version.
My guess is the 6.0.1 was released before FCE 4.0.1.
"In general, Final Cut Pro can open a Final Cut Express project if it was last modified in a version of Final Cut Express that was released before the version of Final Cut Pro that you are using."
http://support.apple.com/kb/TA24708?viewlocale=en_US

Opening FCE 4 project in FCP 7? Is it possible?

Hi All
I am on the verge of buying FCE 4 to rough-cut a doc project that will likely end up being finished on FCP. Budget is tight at the moment and my current 'field' machine is too slow to run FCP 7 properly.
I know that FCE cannot export an edit decision list, but that FCE 4 projects can be opened in FCP 6, according to Tom Wolsky (see http://forums.creativecow.net/thread/8/995580).
I assumed that FCE 4 projects could thus be opened in FCP 7 -- but this website http://www.answers.com/topic/final-cut-pro says that FCE 4 is NOT compatible with FCP 7.
Can anyone advise on this? Is it possible to rough-cut a project in Apple Intermediate Codec in FCE 4 and then open this project in FCP 7, re-import footage as ProRes, and finish?
I look forward to your responses!
Adam Welz

Hi Tom
I've split this question into two parts:
A) I'm not entirely sure what the implications of FCE 4 losing 'all timecode' when converting (in this case AVCCAM .mts) files to AIC on import are. Apparently the original timecode is still there -- it's just not visible unless you use a filter like FCE Timecode Display (http://web.mac.com/piero.fiorani/PieroFFCE_Effect/TimecodeDisplay.html).
I'm on a steep learning curve here, so please excuse me if I sound a bit dumb, but does the fact that AIC 'loses timecode' mean that if I open an FCE 4 project file in FCP 7 and try to re-capture media (and convert to ProRes while recapturing) from my original AVCCAM files using FCP 7, that FCP 7 will not know where to find the clips to re-capture?
B) I'm also not sure what you mean by capturing media as DV anamorphic downconverted to retain timecode. Presumably this does not apply to AVCHD footage, as you have indicated elsewhere in this forum (and chapter 16 of the FCE users manual says) that the only transcode (ingest) option with FCE is to convert AVCHD footage (including AVCCAM footage) to full-size AIC? Please clarify.
Thanks for all your help!
Adam
Message was edited by: adamwelz

How to open FC Express project in FCP

Using FCE 3.5 and need to open the project in FCP 5.0.4.
At the moment I get a window telling me:
"File format is too new for this operation"
Checked Software Update to see if there was a FCP upgrade I was missing, but doesn't seem to be one.
If this has already been posted I apologise and please direct me to it.
Thanks Mac People
-justin!

You probably need v 5.1. It is not a downloadable version.
To move from 5.0 to 5.1 is considered a Crossgrade and the forms and details for how it works can be found on the Apple website - FCP Studio pages under updates. I believe the cost is ~$200 but may have forgotten the exact price.
good luck.
x

How can I open a fcp7 project in the new logic pro X?

How can I open a final cut pro 7 project in Logic Pro X?

What are you trying to achieve? FCP7 is a movie project format, not to mention it's years old while Logic is a music sequencer. If you try to add audio and soundtracks to a movie you'll need to export the movie file and add it as a video track (just drag and drop) to your Logic project. You may want to do your editing in Logic with a LoRes version of your movie, than export your work to a lossless audio format and put that file in your Final Cut for HiRes export. Logic Pro also supports region positions as SMPTE (e.g. in the event browser), if that helps you synchronize some events.

Open iMovie 10 Project in FCP X

My son edited a movie in iMovie 10 and wanted to choose different fonts for the titles. For some reason we haven't been able to figure out, he is unable to edit the font styles as that option appears to be grayed out, regardless of which title style he chooses (reading in the Apple Support Communities, this is either a bug or intentional), so we decided to add titles in FCP X. But we can't find the project now! Where in the heck does iMovie 10 save projects?
Chris

Thanks so much! I followed that info and was able to get much of the material up in iMovie. There are still some projects that it cant find the media for, but that's not surprising. I've got files and folders spread between two different drives, in all kinds of places. iMovie shows three different Libriaries in the lefthand colum now, iMovie Library, iMovie Library 1 and iMovie Library 2.
I was able to find the main Movies folder, with its iMovie Porjects and iMovie events folder and I put them at the root level of the external.
Now I need to figure out where this new material has been stored, then find all those other folder and files and somehow get them into iMovie as well.
Eventually I'd like for the iMovie library and and all its assoicated files and folders to be stored on one of these externals Iit may be that way now...) Do you know how to check which folders and files iMovie is referencing?

Issues opening projects in FCP 7

I am having issues opening up my project in FCP 7...when I go to open a project, only the browser window opens and I can't seem to open the timeline and canvas...when I go to the Window tab, Canvas and Timeline are not highlighted as options for me, how do I get those windows open?
Also, I imported .MOV movie files into Final Cut that opened up in my viewer window and played fine on my timeline the other day, now I get a "General Error" "Not enough memory" warning that comes up when I try to open, is there a reason for this and a way around it?
Thanks!

Unless you are planning to output the timeline to tape, you can turn off the dropped frame warning. It is not a problem if the canvas is dropping frames while you edit as it is only a reference display of the timeline.
In Final Cut Pro, go to the menu Final Cut Pro > User Preferences and on the General Tab, make sure Report Dropped Frames during playback is UNCHECKED:
RavenF wrote:
but when I go to the "RT" drop down menu, the only option I see is: Play Base Layer Only. The other options that are normally there are not coming up.
What are your sequence settings? Click anywhere on the timeline and type Command + 0 {zero} to see your sequence settings. Either report those settings, or take a screen shot of the sequence settings and post that here.
Are you attempting to edit to a timeline set to an H.264 codec?
MtD

Open FCExpress projects with FCP

Hi Mac friends,
I once had FCExpress. Not any more.
I´ve all FCExpress projects and all the media stored on an external FW hard drive.
Can I open this projects now with FCP and save them as new FCP Projects in order to use and preserve this works?
If so, what´s the proper way to do it?
Thank you very much.
L.

You can open FCE projects with FCP. You will not be able to open the updated projects from FCP on FCE.
Just do a "Save As..." to make a copy.

Opening iMovie 6 Projects in Final Cut Pro?

I have a load of unfinished iMovie 6 HD projects that I'd like to finish in Final Cut Pro, firstly is it possible to open iMovie 6HD projects in FCP and if so how?
Thanks

Not a very good way obviously as you you'd have a string of shot with no handles. FCP doesn't work in the same format DV as iMovie does, so the audio will need to be rendered. The best thing is to try opening the project and see if it works. You could try taking the media from inside the iMovie package and reconsidering the project in FCP, but again the video format is not the same and will need rendering.

FCP6 Project Files Open in FCP7?

Hello
Just wondering if FCP6 project files, (created in a G5 desktop 10.4), will open in FCP7 in a Mac Pro with Lyon or Mt. Lyon? Then saved as a NEW/different file as a FCP7 project file?
Thanx
Mike

Yes. They open fine. FCP 7 will just update the project file

Can't open a project in FCP 7

Hello:
I can't open a FCP 7 project. Every time I try to open it, the project get stuck at 2% and then I received a notice that FCP 7 is not responding. The project is at an external hard drive. I run some tests and the drive is fine. I can open other projects that are stored in the same drive, but not that particular one.
Although I have the project back up at another external drive, there is some information that wasn't backed up and I need to retrieve it urgently.
What should I do? Could it be a corrupted file?
Thanks for your help!!
Rolando

First thing to try is resetting your preferences. The best way is using Digital Rebellion's preference manager. It's free
http://www.digitalrebellion.com/prefman/
Digital Rebellion also has a Project Repair App, part of Pro Maintenance Tools.
http://www.digitalrebellion.com/promaintenance/
There's a free trial.
If these two things fail, there may be a corrupt clip causing the problems. If you take your media drive offline and try launching the project, it may load. You can then slowly reconnect the media until you find the problem. Sometimes, just going thru this process will solve it.
You can also try an autosave version of the project. FCP automatically saves back up versions of the project as you work on it. The default interval is 30 minutes. Just do a finder search for autosave to find the folder.

Open fce 3.5 project in fcp 5.1

Hi Gang,
can anyone help me with this simple question... can i cut a project in fce3.5 and then email the project file to my colleague and have them open it up in their fcp 5.1?
we do this at the moment between fcp5.1 and fcp5.1.4, and it works well.
what are people's experiences with transferring project files between the two apps?
many thanks.

now this: can i import and export edls into fce? does fce have a reconnect media function?
i'm a fcp user at my work looking to start out small in fce at home - what are the big differences i will notice between the two programmes?
thanks.

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4 I noticed that if I open Final Cut Projects created on other/older models MacBook Pro Laptops or MacPro Desktops, the fonts used in the previously created FCP projects, change their

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4
I noticed that if I open Final Cut Projects created on other/older models MacBook Pro Laptops or MacPro Desktops, the fonts used in the previously created FCP projects, change their font spacing! which distorts the look of the Text that was written, by oevrlapping on other things that were put & present on the screen.. Another similar probelm is that the Vector shaped used for example to highlight certain words or shapes, also change their position on the screen so that they no longer highlight exact things that we once used these vectors to highlight or outline... Anyone knows how to solve this problem please?? I made sure that the same fonts are available in the Library in both old and newer computers...
thanks in advance..

You might want to take your question to the FCP forum - if you copied all fonts to your Library>Fonts folder and restarted they should be recognized by all applications. I know that this works for Adobe products, anyway.
Clinton

FCP crashes, and opening and saving projects take too much time

Since my upgrade to FCP 5.0.4 I’m having trouble on several aspects of FCP.
I am using an Xserve raid storage, connected via fiberchannel to an Xserve with 10.4.4.
The editing computers are connected via fiberchannel and Xsan to the central storage.
FCP runs on an Apple G5, and my projects run from an external disk described as above. Al the other FCP scratch disk settings are also set on the external disks.
Example:
I’m using the FCP 5.0.4 with the multi-clip mode, and one of the consequences is, that my projects become relatively large. The larger they become, the longer it takes to open (up to 10 minutes) it and to save it (up to 2 minutes). Together with these problems, FCP crashes a lot.
I set my “auto-save” at an interval of 15 minutes, to prevent to loose a lot of work, but when it takes 2 minutes to “auto-save” each time, I loose a lot of time.
So when my project was 224 MB, I made a copy of my project, and opened it from a local drive. Opening the project took also 10 minutes. But when it was open, “saving” the project took only 15 seconds, instead of 2 minutes. The “auto-save” was still on the external scratch disk. “Auto-saving” still took 2 minutes. So I set the “auto-save” on a local scratch disk, and after that, it took only 15 seconds. Opening the project still took 10 minutes. And the FCP didn’t crash frequently.
My conclusion would be that the problems have something to do with the size of the project in combination with the connection with the external scratch disks. Is this correct? If yes, how do I solve this.
And if not, what else could it be?
Out of memory
Another problem occurred when my project was 327 MB. I had a multi-clip sequence of 100 minutes, with 4 camera angles and a lot of cuts and effects in it. When I tried to “nest” the sequence, it didn’t work and got the message: “out of memory” . Then FCP crashed.
When I opened the project again (it took 10 minutes), I could not save it anymore: ”out of memory”. So now I cannot work with this project anymore.
How do I solve this?
Is my project or sequence too big?
Another crash example
FCP crashed sometimes, when I switch my “Ëxternal Video” setting from “Blackmagic 8 bit” to “Firewire PAL”. Could this have something to do with it the problems I previously described?
Can anyone help me with these problems?
G5 Mac OS X (10.4.4)

I've run into a simliar problem and I believe I traced the issue down to the number of files on the drive. A drive I was using had over 600,000 files on it. Opening projects took 5+ minutes, saving took 2+, for a 15 minute simple project.
See if that is your issue.
Edit: 600,000 files on the scratch/capture disk.

Opening a FCP7 Project in FCP X

Similar Messages

Maybe you are looking for