Opening a file offline

the file loads very slowly - is there any trick to open it quickly and instantly in "offline all " or "skip all" ?

First, work through the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed, report back with the DETAILS asked for in the questions at the end of that link... For question #1 see the note about the FREE http://www.headbands.com/gspot/

Similar Messages

  • I can not open rpd file in online mode by oracle bi administrator tool

    Dear All,
    I faced an error below:
    - Yesterday, i opened rpd file online normally. after that, i restarted (stop bi services + start bi services) bi server. we did work by openning rpd file onlie normally.
    - today, i could not open rpd file online, it noted _"logon failed"_. i could open rpd file offline
    - i check log in OEM --> Business Intelligence --> coreapplication --> Selected Item: Diagnostics, some error below (i don't know exactly cause by what error)
    + Failed to restore ctx from reference
    + server is local, but local login bypassed.
    + Demo trusted CA certificate is being used in production mode
    + !!! Oracle FOI server destroyed. !!!
    + !!! Oracle MapTileServer destroyed. !!!
    please help me as soon as possible,
    Many thanks,

    Hi,
    Can check the nqsserver latest error log message
    path will be like below,
    D:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIServerComponent\coreapplication_obis1\nqsserver.log
    what changes u done? is it configured with SSL?
    Thanks
    Deva
    Edited by: Devarasu on Nov 23, 2012 5:09 PM

  • Protected mode message comes up and when I try to open files it says it encountered an error and to check online.. i can not open any files now

    Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
    I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
    and will check online for solution. Please assist as no files will open now
    This is details of error
    Problem Event Name:    APPCRASH
      Application Name:    AcroRd32.exe
      Application Version:    11.0.10.32
      Application Timestamp:    547e9779
      Fault Module Name:    StackHash_147f
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Code:    c000041d
      Exception Offset:    77a011f1
      OS Version:    6.1.7601.2.1.0.256.48
      Locale ID:    1033
      Additional Information 1:    147f
      Additional Information 2:    147ff66574b08dc93180d912e60eb897
      Additional Information 3:    c48b
      Additional Information 4:    c48be403c52ec6c06778481aaa8948d8
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Can you open Adobe Reader by itself?  If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].

  • Error while collecting files in AE CS3 - You do not have permission to open this file (-54)

    I've got a rather large project that I'm attempting to collect.  35,000+ files to collect (lots of image sequences as footage), totaling near 80GB.  The collect process starts and copies files for a while, but inevitably errors out during the copy procedure with the error "You do not have permission to open this file" -- a different file each attempt.
    I'd read some complaints of a similar error last year due to QT 7.4, but I'm on the current Quicktime (7.6.4).
    Anyone seen this before?  What can I do!?  Thanks in advance for any ideas.
    --Rob LaRose
      Imaginary Forces

    Well, we're just a small shop, but since it usually falls upon me to administrate, here's a few general tips:
    Hide all resources that are not meant to be accessed by certain people. This can be done easily by using different sub-nets on your network and defining access privileges. Write down the network MAC addresses and use a whitelist/ blacklist. A bit of work initially, but a lot safer than working with user names.
    Forget about individual user privileges. At one point or another everyone will bump into situations where they cannot access stuff, but need it for their work. Simply ramp up all users to Power User status, but assign individual groups to them which only you can manage. That leaves it up to you to define who can access what, but without having to dig so deep that you always end up with individual adjustments. You merely add or remove users from groups (which is more practical for interns and freelancers, even)
    Quota can do miracles for you. If a user only has x GB of storage available, he'll quickly learn to not create redundant data by copying files.
    Prevent all local storage. Artists have a tendency to offline files at whim for experimentation and then forget about it. Give them a "garbage dump" directory on the server instead where they can store their private data and any non-persistent work files, but with quota. Use server-side desktops and user home directories, if possible, but unfortunately many programs cause problems with that (including Adobe's), so it's not always an option.
    For each new project, create a pre-defined folder structure. We e.g. use number_clientname_worktype_year for the root, and inside have directories for compositing, 3D stuff, print, client data etc.. Define it so from the getgo, that specific structures like project directories for 3D programs with their sub-folders for textures etc. are in place, but users cannot create additional folders. When they are forced to use existing folders, they will be much more careful in naming their files.
    Define versioning rules and naming conventions. Now "siginificant milestone" is a matter of view, but I at least try to create new version files for that. So if e.g in the morning I open up a comp project and change a few things in it that take more than 10 minutes to reproduce, this is significant and a new version is safed. I don't care much for simple things like adding effects - I can reproduce them in a wee in case of crashes or data loss - but complex masking, elaborate 3D modeling, dynamics simulations etc. qualify.
    Of course back up every day, at least incrementally. If following the above rules, this can be as easy as copying the project folder to an external disk.
    As for the rest - simply be hard-nosed. Your artists will whine and complain for a while, but they will get used to it and eventually see the wisdom in a regulated system. It's also up to you to brief them accordingly and remind them from time to time.
    Mylenium

  • Can't open any files in hotmail account or even post on there forum anymore. I am not receiving any error messages.

    This started a couple days ago. I can log into my hotmail account but I can't do anything once in it. What I can do from day to day varies. I have never received an error message. Day one I could log into hotmail but not open any files or emails. Day two was the same problem. Today, I was able to open some files and emails but cant send an email. I posted on hotmail's troubleshooting forum but today I can't even access their response to tell them their "solution" did not work. All that happens is I get the blue circle of Windows that shows up when waiting for something. The top tabs will indicate it is connecting and it flashes like crazy.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode

  • Can't open FCP file (version 5.1.1)

    I have a FCP file file that will not open. The movie file included 1) imported pictures 2) movie footage, 3) several sound tracks (two from Cds and about 5 sound track files from SoundTrak Pro for effects); the movie file has a duration of about 5 minutes. I’ve tried the following (in this order):
    1. Checked the autosave vault. While I can recover the file, I’ve lost 14 hours of editing so I would like to find a better solution.
    2. Moved the Soundtrack files so they are no longer referenceable (moved these to another folder); that didn’t work.
    3. Repaired disk permission s (only had two differences) so I don’t think this was the problem; that didn’t work.
    4. Moved the render files so they are no longer referenceable; that didn’t work.
    5. Moved the media files offline; that didn’t work.
    I am using FCP 5.1.1 on OS X Version 10.4.6, on a Dual 2 Ghz Power PC G5, 2 GB DDR SDRAM Memory. I started the project on FCP 5.1.1 I didn’t create the FCP file in an earlier version. I also haven’t moved the files from one disk to another (I created the movie file on my primary drive). I have checked the support postings but can’t find something with exactly the same situation (one of the above items seems to have worked for most people) but I’ve tried these and the FCP file will not open. I would really appreciate your help on this! Thanks.
    Power Mac G5   Mac OS X (10.4.6)  

    I got FCP Rescue and opened the application. There isn't much to this application except "Trash" as I understand it. So, I clicked on Trash. After the third try of reopening the FCP file, it OPENED! Yea, which is great! So, that is good. Thank you for the suggestion; that was helpful!
    While I can see the file and can export it to Quicktime; for some reason the movie file will only play about 5 seconds and then stop/start/stop/start, etc. I am using "Safe RT", Playback Video Quality is set to "Low", and Frame rate is "low". I've tried various combinations of these including Dynamic; the movie won't play for more than two-five seconds which makes it very difficult to edit.
    I have 40 gigabytes remaining on my hard drive; could this be causing a playback problem? The playback worked fine before I couldn't open the FCP file. For some reason after I opened the file it won't playback smoothly.

  • Unable to open PDF Files with adobe reader VI

    I have downloaded the latest version of Adobe Reader VI I am still not able to open PDF Files. When I click on the file I get a blank window with a  little black box inside a White X!    This black box appears  in the upper left hand corner of the blank window! Please any help to overcome this issue is welcomed...Rick

    You are not addressing Adobe here, just fellow users, and you are not providing enough information about your problem. Based on the little you say, I would sauy that you can try using this tool to first remove all traces of Reader from your computer:
    http://labs.adobe.com/downloads/acrobatcleaner.html
    Then, you can download the full offline Reader installer from
    http://get.adobe.com/reader/enterprise/

  • Workaround: open Macpaint file in Windows 7

    Decades ago I owned a MacPlus and made a few files in MacPaint, which I have doggedly copied from computer to computer, ending up on a Windows 7 PC.  Feeling nostalgic, I figured out a way, albeit crudely, to get those old MacPaint files saved as JPGs.  
    1. Save old MacPaint file as filename.mac (.mac extension).
    2. (Download and) Open Quicktime for Windows. Mine glitches when it opens and I find I have to minimize it, then maximize it again to get the full window.
    3.  Then go File-> Open File and navigate to your filename.mac folder.
    4.  change filetypes to all files (*.*) and select your filename.mac
    5.  Mine just opened up the MacPaint file and there it was--my 30 year old picture in all its Steve Jobs-vision glory!
    6.  Make the QT window as large as possible then use the Snip-it tool to save a JPG screen capture of your picture.  (There may be a better way than this, but that is all I could figure out, and the original is pretty low resolution to begin with). 
    Alas, it only seems to work with MacPaint files.  For MacDraw files I was able to open them in Adobe Illustrator, although the fonts and some of the lines were wrong. Not bad for 30 year old files though!

    Dear Margthecar
    Thank you for the sharing. I have some figures created in 1994 on my old Mac SE, as you did i copied the files many times from computer to computer, from Mac to PC. I would like to recover those images to be saved in jpgs so i can publish them in a journal paper (yes, the information is still relevent due to difficulty to obtain those results), open those files whatever on a Mac or preferably on a PC. I could not remember they were done in paint or draw, could you I ask you a favor to have a look at my files and if possible, convert them to a format i can handle now?
    it seems i cant attach anything here, i might need your email address offline to send you the files.
    Ping

  • Can open .pdf files in Chrome but cannot open the same file after saving it.

    Description:
      A problem caused this program to stop interacting with Windows.
    Problem signature:
      Problem Event Name:          AppHangB1
      Application Name:          AcroRd32.exe
      Application Version:          11.0.3.37
      Application Timestamp:          518e18e3
      Hang Signature:          99d4
      Hang Type:          0
      OS Version:          6.1.7601.2.1.0.256.1
      Locale ID:          1033
      Additional Hang Signature 1:          99d4b1f941b223144a152a1173c0a0ff
      Additional Hang Signature 2:          01f5
      Additional Hang Signature 3:          01f554accbda5b57fa70e2256b021236
      Additional Hang Signature 4:          99d4
      Additional Hang Signature 5:          99d4b1f941b223144a152a1173c0a0ff
      Additional Hang Signature 6:          01f5
      Additional Hang Signature 7:          01f554accbda5b57fa70e2256b021236
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Thanks Pat.  Tried each, restarted computer each time; tried the "Accept" routine several days ago - it worked briefly and then stopped.  Uninstalled Reader and Flash as well.  Strange thing with Flash, one of my online broker programs provides streaming of CNBC.  When I clicked on the CNBC option to initiate CNBC, I got a message saying that I needed to load Flash.  I did, and it loaded again with no mention of Flash having already been installed.
    Using Internet Explorer works, as well as, clicking on the .pdf file within Windows Explorer (WE).  Expanding the window in WE makes it large enough to read.  I would still like to find a way to open the files as they are designed to open.
    I have done all of the Adobe updates as they have been presented.  Microsoft updates load automatically, and restart my computer in the process.  I do not look to see what the updates have been.  I figure if there was not a need, Microsoft would not make the updates.
    [private data removed]

  • After I download an attachment I have to go to the download window and manually open it, my laptop use to download then automatically open the file, how do I get this feature turned back on?

    After I download an attachment from my webmail I have to go to the download window and manually open it, my laptop use to download then automatically open the file, how do I get this feature turned back on?

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode

  • Render File Offline; Project in a Loop

    I was rendering a complex part when FCX stopped and said a render file was offline or something. It was so many steps ago, I forget exactly.
    Eventually, I had to force quit FCX because it "froze up" on me. I went back to the autovault and got a slightly earlier version before all this started but now if I try to render that same part, FCX stops with the message "La Cie 250/Sequence 2 Op-FIN-0000015d" Render file offline. I had to force quit again because the program won't let me go anywhere.
    Am I going to have to trash preferences, repair permissions and restart again? Just had to do this a few days ago. If so, what is the problem? I try not to have too many apps open at a time, do things one at a time, etc.
    Any help MOST WELCOME!!
    Lee

    See if you can play the material using Opt-P without
    rendering.
    Sorry. . . . .what does "using Opt-P" mean?
    Look in the capture scratch folder in
    column view and see if there are preview windows for
    all your clips. If any show up with a generic icon or
    the preview is a generic QuickTime icon the file may
    be corrupted.
    There seem to be files all over the place in the folders where I designated what was to be the destination for the scratch disk. (I wasn't 100% sure about how to set up the files for the scratch disk because I had to transfer all the project files from one external hard drive to another when the first drive died. I was so afraid of losing all the work that I did what I thought best at the time. Have been a little afraid something like this might rear its head.)
    Tom, I don't even know how to begin explaining to you what is where in that external hard drive.
    This may be too much for a discussion group question.
    Lee

  • Photoshop 6 - Cannot open AVI files or fix codecs - help !

    I am running PS6 and want to open and edit AVI files. When I try to do that I get an error message saying "the video file cannot be opened" . This seems to apply to ALL avis - yet I can open and edit MP4, MMV etc. I installed Gspot to track whether it was a codec issue and when I try to open ANY file I get this error message : "Warning: DirectShow crashed while GSpot was attempting to obtain information about a codec.  This is usually due to damaged, misconfigured, conflicting, or poorly written codec drivers.  It is possible, perhaps even likely, that other media players will crash when they attempt to play this file as well, as most of them will also use DirectShow.  GSpot was able to intercept the crash, and has attempted to identify the codec or filter involved; uninstalling or reinstalling this codec or filter may solve the problem.  The codec was tentatively identified as:  C:\Windows\system32\imaadp32.acm Unknown video codec #11" I have NO idea where to go from here. I see a site to download the "imaadp32.acm"  codec but what about the "Unknown video codec #11". What the heck is that and what do I do about it. Any help would be appreciate, Cliff
    ps I should add that the avi files DO open and play in Bridge. I have the latest Quicktime. Everything is up to date and PS and the computer is otherwise working perfectly !

    See your other post. The forum was offline for a while, so things may not have shown up in the way they should.
    Mylenium

  • Illustrator CS2 can't open new file with network printer installed

    It seems that with my network printer set up I can't do much with Illustrator, I can't open new files and I can't print without opening up the printer setup menu in Windows.
    Photoshop CS btw, I can't open it at all.
    I take the network printer offline and everything is fine, except then I don't have a printer.
    Windows XP SP2
    Illustrator CS2 12.0.1
    Any fix for this?
    Thanks,
    David

    Creating a Dummy Generic printer fixed the issues of opening a new file in Illustrator and being able to open PS at all.
    However Illustrator is still taking several minutes to print something as simple as a test circle.
    The menu I was referring to is Printers & Faxes under control panel, though I realized later that may not have had anything to do with it. It may have simply been coincidental timing. I opened the P&F window about 10 minutes after hitting print and just after opening P&F the print window popped up. It simply may have been taking 10 minutes for the print window to open.
    With the network printer set up as the default printer if I try to open Photoshop a window opens but just stays a grey blank screen, no credits box, nothing. Then if after a few minutes I hit ctrl+alt+del it says Photoshop not responding.
    What I was doing to take the printer offline was to completely delete the network printer from Printers & Faxes.
    I'll see if they have an updated set of drivers, but I think I have the latest ones, as I updated them a month or so ago.
    Thanks,
    David

  • Can't open .mov files for iMovie editing; can't even view in QuickTime, etc

    Our band recently had a videographer record our performance using two panasonic hd cameras: AG-HVX200 and HPX170. Both were set to hd 720 X (?) at 30 fps.
    All files were saved as .mov files.
    We can't see them at all. We were told that they were designed to be opened in Final Cut Pro (which we told him not to do).
    We do have Final Cut Express, but neither FCE nor iM allows us to select the files ("grey'ed" out).
    Can someone please help us understand how to open these files? Do we need a specific codec?
    Thanks much.

    I am no expert on DVC Pro HD, but here is what I found out.
    HD compression format by Panasonic. 
    Similar compression type to DV 25 but uses a higher bit rate up to 100 Mbit/sec,  depending on 
    the specific HD format being recorded. Highly popular format because of its lowe r bit rates, and 
    incredible resolution considering how highly compressed the format is. 
    This format is very popular as an acquisition format used with Panasonic's Varic am camera as well>as several Panasonic cameras that record to P2 card systems. A lso used heavily to convert higher->end HD formats into a high quality offline e diting format. Uses component recording, DCT 
    compression at approx. 7:1 (intraframe), 4:2:2 color sampling, 8->bit depth and  up to 8 audio channels. 
    1080 formats record at 1280x1080, 720 formats record at 960x720. At 1080p, frame  rates include>23.98, 24, 25 fps. At 1080i, frame rates include 25, 29.97, 30 fp s. At 720p, frame rates include 
    23.98, 24, 25, 29.97, 30, 59.94, 60 fps.
    Source: Moviola
    I agree that you want AIC not DV. AIC is a 4:2:0 codec so you will lose some quality, but it is your best option without buying FCP.
    Message was edited by: AppleMan1958
    Message was edited by: AppleMan1958

  • How to view olk14 messages that are not opened by outlook offline

    My problem is with olk14 messages that can not be opened by outlook offline.
    I have been following previous post and explanations, namely rebuild the Microsoft Database User identity but with no sucess.

    Will this link help?
    http://www.officeformachelp.com/outlook/troubleshoot/outlook-cannot-open-the-fil e-because-it-is-not-associated-with-the-default-identity/
    This is a user to user forum & most are not using Outlook. Your best bet is to do a Google search.
     Cheers, Tom

Maybe you are looking for