Opening a Somat .sie file in DIAdem takes forever

Hi All,
I'm new to DIAdem but know LabVIEW well. I am trying to open a Somat .sie file. I have the Somat .sie data plugin installed and DIAdem sees the file fine but it takes forever to load. The file opens fine using SoMat InField (and very quickly). I've attached a sample for you to take a look at.
Anyone who can pop it open straight away?
Thanks,
Phil

Oops. Never attached the file.
Change .txt to .sie.
Attachments:
edaq_test (1) - Copy.txt ‏4756 KB

Similar Messages

Trying to move files to trash takes forever, and finder windows take forever to load files/apps

after recently installing Mackeeper (yes, I know..) and attempting to uninstall, my macbook pro 13" al. is taking forever to move a file to the trash, and it equally takes forever to open a finder window. running 10.6.8.

MacKeeper is an exception to the rule that system modifications should be uninstalled according to the developer's instructions. Although not generally recognized as such, MacKeeper is in fact a trojan, because the developer distributes an uninstaller that purports to delete it, but leaves behind something that causes popup ads to appear in the user’s web browser. Try following the instructions here:
how to uninstall MacKeeper « Phil Stokes
I can't personally vouch for the accuracy of those instructions, but others seem to have had success with them.

Opening large tdms files in excel takes forever, can anything be done?

After recording some daq channels for 4 hours my file is 120mb large, with about 20columns of data and 150k rows. Opening this in excel takes at least 5min, several not responding screen fades, and growing fear that all my data is impossible to get to.
What can I do about this? Is there a split tdms file option I can use or a way to speed up excel maybe?
Solved!
Go to Solution.

The solution is to not make the TDMS files so large. Perhaps modify the code so it starts a new file every 1/2 hour or something. Could you post a screen shot of the part of the code that is doing the saving?
Something that just occurred to me is that the TDMS file format is optimized for writing - not reading so stuff is just sort of streamed into the file with an index keeping straight what goes with what. The results is a file where the data from individual channels can be very fragmented, like parts of a file on a hard drive. I think there is a routine for defraging a TDMS file. Alternately, you could save the data in a temporary file (not necessarily TDMS) and resave it to the final TDMS file after all the data is collected.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

2008 r2 File permissions/security takes forever

Is there a way to set changing permissions back to the way 2003 worked or tweak 2008? If i make a top level change to a folder that has millions of files on a share it looks at every file one by one to remove a securoty group.

Hi,
Would you please clarify the issue in detail so that we can understand clearly and provide you the solution accurately?
Currently, I would like to share some articles with you that you may be interested in.
How inheritance affects file and folder permissions
http://technet.microsoft.com/en-us/library/cc758779(v=WS.10).aspx
Inherited permissions are not automatically updated when you move folders
http://support.microsoft.com/kb/320246
Inherited file security permissions may be removed when you remotely edit the permissions
http://support.microsoft.com/kb/304140
HOW TO: Control NTFS Permissions Inheritance in Windows
http://support.microsoft.com/kb/313398
Regards,
Arthur Li
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected] .
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Saving takes forever

Guys,
saving files in Soundtrack takes forever. any idea why? sometimes it even seems unresponsive and crashes. help is much appreciated

If you are running Tiger 10.4.8 then that's the problem, you need to update your OS to 10.4.10 at least. 10.4.9 has a Pro app update and that will improve your save time.

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test tomorrow. I have deleted and reinstalled the application. I have rebooted. I have made sure my PDF's are associated with the program. Every PDF on my computer won't open and I get the same error message. It simply says Attempt to access invalid address. How can I fix this? Thanks.

Hi Don,
I have seen this issue fixed for some users by modifying the following registry key:
The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
Set the key to 1 instead of 0 then reboot the machine.
In case you still face the issue try the following registry key change:
The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
BEFORE:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
AFTER:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
Note: Please take a backup of the registry before attempting this change.
Regards,
Rave

Need help. I am running a 27 in imac with 16 gigs of ram. Photoshop runs really fast, except when opening files. It takes 5-10 minutes to open even a small file of 1 meg. I cleaned and validated all the fonts and removed all questionable fonts. Reset pref

Need help. I am running a 27 in imac with 16 gigs of ram. Photoshop runs really fast, except when opening files. It takes 5-10 minutes to open even a small file of 1 meg. I cleaned and validated all the fonts and removed all questionable fonts. Reset preferences and still have problem. Slow to open and in force quit "Photoshop not responding" At this point should I uninstall and start over.

What are the performance Preferences?

HT1338 My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

Hi ...
Checked to see how much free space there is on the startup disk lately?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
If disk space is not the issue, booting in Safe Mode deletes system caches that may help.
A Safe Mode boot takes longer then a normal boot so be patient.
Once you see the Desktop, click the Apple menu icon top left corner of the screen.
From the drop down menu click Restart.
See if that makes a difference ...

Flash Takes Forever to Open Files

I'm currently running FLASH CS3 on my 17" powerbook and it's
slow create new files and even slower to open pre-existing ones.
Sometimes it takes so long I wind up having to force quit. Anyone
have any ideas on what might be wrong?

There could be 100 reasons why that's happening. Could be
your RAM, processor, corrupt flash installation, corrupt or out of
date drivers, low hard drive space, you didn't get enough sleep,
etc... You need to provide more info.

It takes forever to open files or insert files in Pages.

When I try to open a file (or open from the recent file drop down), or insert a file, in pages I get the spinning beachball for 30 seconds before I can do anything. This started before I installed Lion, but it's worse with Lion. Help!!!

It seems that something is wrong on your machine.
Here the menu open instantaneously.
I wish to add that from my point of view, when we open a document thru the "Open Recents" tab, it's not a new document.
A new document is a document which was just created from a template.
Yvan KOENIG (VALLAURIS, France) mercredi 7 décembre 2011 22:17:14
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Project Takes FOREVER to Open and Close

We have a large RoboHTML project that outputs to a WebHelp
system. The version of RoboHelp is X 5, possibly a version after
that, I think - but dated 2004. Two of us share this project, but
we don't use Version Control. The size of the project is about 45
MB, and includes several subfolders of topic HTMs. My coworker has
the same issues, possibly a bit faster than what I have, but still
excessive Open and Close Project times.
It takes an extremely long time to open, like about 10
minutes or more. When I select to Close Project, the CPU Usage
shown in Task Manager is up to 100 % and stays there, so the
closing process is maxed out and frozen, and obviously isn't happy.
Even when I close other applications, the project can take over 30
minutes to close - no error messages, just hourglassing. While I'm
using the project, it doesn't max out. There have been times when,
as much as I hated to do it, I had to do an End Task with Task
Manager because the project wasn't closing (and I had to leave).
Also, note that the CPD file of this project is over 4 MB. I
just was reading about deleting the CPD file, so I plan on doing
that.
I'm not sure of any more details I can provide. While I'm
working on the project, there are usually no freezes or response
time problems. Just the extremely long Open Project time - and even
longer Close Project time.
I would so appreciate any solutions or ideas. Thanks!!!
Susan

Update - I deleted the CPD file, and it opened a lot faster!!
It also closed in a reasonable amount of time - however, I did not
work in the project for a while before I closed it. So we'll see
what happens when I close it at the end of the day.
So, the deletion of the CPD file may have solved the problem.
However, if anyone wants to offer feedback on this possible
solution, I would appreciate it.
Thanks!
Susan

I can't open or view RAW files?

I have two Macs. One is an iMac and one is a Macbook. I usually always use my iMac for photo processing and storage. And I use an external hard drive to store all my photos.
Now I recently had to take my macbook with me because I was going out of town and could not transport my iMac. But I was missing a lot of updated things on my macbook, such as my preferences and settings, apps, files, etc, since I rarely use it... and I wanted to transfer all that to my Macbook without the use of tedious uploading and formatting. So I reformatted my macbook by backing it up onto an external drive, erasing the disk, and then migrating my data from my iMac to my macbook. Everything seemed just fine with all my latest settings and files where they should be... until I opened a folder or Bridge and could not view or open any RAW files.
It said I did not have enough access privileges. I am the admin of both my computers, but I do have other accounts for my mom and 2 others for whatever reason (they have never interfered before). I rarely use those accounts and they are NOT admins. But it said that only my mom's account had the privileges to read and write the files on my external hard drive (which has all my photos.) I logged into her account, and sure enough, I could view and open all the RAW files. I can view and open jpegs on my account now, but not any RAW files.
I tried going to "get info" on the external drive, and it said that everyone could read and write. But when I went to individual folders and files, it said only my mom could read and write. And even when changing the permissions so that everyone could, it still didn't work.
I also have the latest software updates... I have tried doing disk utility. And right now it's still going, saying it has 8 hours left, and so far there are hundreds of thousands of problems. It never was like this until just today.
I really need to get this problem solved. I have work to do and without being able to even see my RAW files, yet alone edit them, makes it really hard. I also want to avoid creating a new account because my account now has all my personal stuff... from all my music on my iTunes, to my actions, to my settings, applications, etc. And it would be very hard to redo all of that. So it would be great if I could somehow fix my user privileges.
Does anyone know what to do? I'd appreciate any help from you!

http://support.apple.com/kb/HT2963

I can't open the attachment to a mail. I must open it i FileApp. but it says that there no App installed that open this type of file. What can I do? I've got iPad 2, version 4.3.3 (8J2) My age: 69 and not so good at computers.

I can't open the attachment to a mail. When I'm trying to open it in FileApp, I get the answer: "FileApp doesn't recognise
this file type.Would you like to try to open in.....
     another App
     as text file
     cancel
When I open it it in another App I get the answer:"there are no application installed on your device that can open
this type of file.
When I open it as a text file, it's loading and loading.....forever?
What shall I do?
PS I'm 70 and not good at computers

Hello Mats in Sweden!
I'm from Austria, not so far away! The file that you've received seems to be a Windows Media File and you may need a special software for your iPad to be able to open it. I've found something HERE.
If you open this link on your iPad it should take you to the App Store, resp. open it. The price for this app is 1,59 €.
Greets from Vienna,
Bärbel

How to Open the FailedFilesLog.txt File (statement), and How to Increase the 100 File Limit (question)

It took us a while to figure this out, so I'm posting this in case it's helpful for someone out there. Plus, I have a question...
DPM gave the following error for one of our file servers:
Description: The replica of Volume D:\ on <servername> is inconsistent with the protected data source. Number of files skipped for synchronization due to errors has exceeded the maximum allowed limit of 100 files on this data
source (ID 32538 Details: Internal error code: 0x809909FE)
Recommended action: Review the failure errors for individual files from the log file
\\?\Volume{8492c150-f195-11de-a186-001cc4ef89a0}\B1E9D373-2C03-464E-A472-99BC93DB1E2A\FailedFilesLog.txt and take appropriate action. If some files fail consistently, you can exclude the folders containing these files by modifying the protection group or
moving the files to another location.
So, how do you actually open the FailedFilesLog.txt file shown in this DPM alert? What is this path referring to? Well, this is the mount point for the protected server's replica volume on the DPM server, which is mounted under \Program
Files\Microsoft DPM\DPM\Volumes\Replica\servername\File System. Here you'll see the mount points for all of the server's protected volumes. However, if you try to open one of these mounted volumes
in Windows Explorer, you'll get Access Denied, even if you have administrator rights. (If someone knows of a way around this, please let me know). As a workaround, you can access this mounted volume in an elevated
command prompt. Steps:
Open an Administrator Command Prompt
Type mountvol <AnyAvailableDriveLetter>: \\?\Volume{VolumeGUID}
Example: mountvol m: \\?\Volume{8492c150-f195-11de-a186-001cc4ef89a0} Note that we're only using the first part of the path to the FailedFilesLog.txt
file given in the DPM alert, starting from \\? and ending after the
} character.
Next, type m: to change to the newly mounted m: drive.
Then type cd B1E9D373-2C03-464E-A472-99BC93DB1E2A This is actually a folder name so we're just going into this folder.
Finally type dir and you should see the FailedFilesLog.txt file. This file can be copied to another location where it's easier to use (i.e. in Windows Explorer).
Be sure to unmount this volume when you're done by typing mountvol m: /d in the command prompt. (Mountvol reference:
http://technet.microsoft.com/en-us/library/cc772586(WS.10).aspx.)
What a pain, eh? But at least by reviewing the FailedFilesLog.txt file you can determine which files or folders caused the sync to fail and thus take action accordingly.
Now, here's my question: Where is that registry key that lets me adjust the limit of 100 files that DPM allows to be skipped before it fails the replica? Hopefully someone out there will tell me. I know this can be done because Kapil Malhotra
said so in this post:
http://groups.google.com/group/microsoft.public.dataprotectionmanager/browse_thread/thread/a179fa30fb50c9b0/e9a348f2a9386063?lnk=raot.
Also, does anyone know what the internal error code 0x809909FE means in this alert? Knowing this my help us determine what caused these files to fail. Interestingly, in the FailedFilesLog.txt file, it gave a different error code next to each failed file:
0x80070002.
-Taylorbox

Thanks for responding, Fahd. So, just to be sure...
Do I add this registry key to the DPM server or to the protected servers (or both)?
In either case, the ContinueOnFailure key does not currently exist. So, I must create this key and the MaxFailedFiles DWORD value
manually, right?
Does the server in which I create this regkey have to be restarted for it to take affect?
Can the DPM alert for the 0x809909FE error event (for exceeding the limit of 100 failures) please be adjusted to provide a path to the FailedFilesLog.txt file
that actually works if you click on it?
Any ideas on why the 0x80070002 "File not found" error happened? The files on the server were simply created and then deleted. Why would such file activity lead to this error?
Thanks,
-Taylorbox

CS4 ILLUSTRATOR TAKES FOREVER TO OPEN

When I open even the smallest file it takes 30+ sec to open it. When I open AI up for the first time with a file it takes even longer? CS3 opens faster then my CS4??? This does not happen ALL the time but about 80% of the time so it is a hassle not to mention a time consumer.
ANYONE?
I run a MAC PRO 3 GHz Quad-Core Intel Xeon with 8 GB ram, OS X 10.5.8

Wade,
Can you be so kind to let us know where can we download CS4 update.
Because CS2 works great with Leopard in a 6 year old macintosh. CS3 with its tons of bugs works faster than CS4. (Fact)
You do not need a very expensive computer to make a faulty software work, a good software runs fine without excuses. (Fact)
So where is the CS4 update?
Tell you lies to all the users with the same Memory Bug problem. You think all of them are wrong?
Here, let me help you with the links:
http://forums.adobe.com/thread/432976?tstart=990
http://forums.adobe.com/thread/488095?tstart=660
http://forums.adobe.com/thread/477259?tstart=960
http://forums.adobe.com/thread/458237?tstart=0
http://forums.adobe.com/message/1256865#1256865
http://forums.adobe.com/message/1255002#1255002
http://forums.adobe.com/message/1253297#1253297
http://forums.adobe.com/message/2088297#2088297
http://forums.adobe.com/message/2014275#2014275
http://forums.adobe.com/message/2317200#2317200
http://forums.adobe.com/message/2180704#2180704
http://forums.adobe.com/message/2180704#2180704
Once you finished with this part of the list, I will send you another part of the list. So go on, Tell them how wrong they are!
Lambert Walsh, VP, Technical Services of Adobe wrote:
Adobe is committed to providing the most advanced, innovative products and services in the world. Recently, however, our customers have experienced a level of service that is inconsistent with what they expect and deserve. This is unacceptable and we sincerely apologize for the inconvenience caused. We are working diligently to resolve these issues. Click here for a letter from Lambert Walsh, VP, Technical Services.
And you still saying that the problem are the users?
I will ask you to provide a definitive solution to this Memory Bug or I will ask you to stop lying. Because either way you are not helping!
So where is Adobe helping us?

Opening a Somat .sie file in DIAdem takes forever

Similar Messages

Maybe you are looking for