Opening an installed CF 11 Developer Edition - Can't Find exe
I cannot find the exe file to open my new CF 11 Developer software. It's unzipped, but the exe file cannot be found in a folder search. I have Win 7 Ultimate on my PC. It's not a server. I understand the developer edition can be used on Win 7. Please help.
You can download the new installer from here:
Windows 64 Bit:
ftp://cust-dl:$[email protected]/ColdFusionInstallers/CF11withU3builtin-updated/Co ldFusion_11_WWEJ_win64.exe
Windows 32 Bit:
ftp://cust-dl:$[email protected]/ColdFusionInstallers/CF11withU3builtin-updated/Co ldFusion_11_WWEJ_win.exe
Thanks,
Rahul
Similar Messages
-
Can I Install SQL Server Developer Edition 2012 on Windows 8
I am just about to buy this:
http://www.amazon.com/SQL-Server-Developer-Edition-2012/dp/B007RFXQAM
I noticed that the 2 platforms listed are Windows 7 & Vista. I'm pretty sure it will also run fine on Windows 8, based on what I read here:
http://msdn.microsoft.com/en-us/library/ms143506.aspx
I'm wondering if anyone has actually installed SQL Server Developer Edition 2012 on Windows 8.
Thanks!!
Ryan ShuellYes, absolutely. It is fully compatible and supported. And you already have the official link :)
This posting is provided “AS IS” with no warranties, and confers no rights.
If this reply answers your question, please mark it as Answered for others to find it easily.
If this reply help you resolving the problem, please vote the post as Helpful. -
Help me in Installing Solaris Express, Developer Edition X 86
Hi,
Help me in installing Solaris Express, Developer Edition
When i am trying to install Solaris, system hangs and the moniter is switcher off when the system goes in GUI mode.
i have intel 945GTP mother board with as on board Intel Graphics Media Accelerator Drives , Chipset -> Intle 945G , 160 SATA Hard Disk, 1 GB DDR2 Ram , P4 3.Ghz Processer , on board Intel PRO/100 VE Network Card.
Please,Help me.
Thanking you,
P.Sathish KumarHello,
first of all: Try to run the HCTS (Hardware
Compatibility Test Suite) first, it's available
here:
http://www.sun.com/bigadmin/hcl/hcts/device_detect.htm
l
This you can run from Windows, and it will list all
hardware that has drivers, and all those, that do not
have drivers (including some public domain drivers).
After that, you have the possibility to install
Solaris WITHOUT a GUI, use one of the two "terminal"
modes. The first Is still a GUI, as it only starts X
and opens a terminal, in which then the installer
runs. The second does NOT start X, but runs the
installer on the console. Try this one, and once you
get through that, you can afterwards figure out the
settings of the Xserver.Hi ,
i have installed the solaris using console.
Still GUI is not starting, the moniter is switched off when GUI gets started
I used Hardware Compatibility Test Suite, its say that system is supported
by Solaris.
Should i have change BIOS setting to stated the system
Bye
P.Sathish Kumar -
Help me in installing Solaris Express, Developer Edition X86
Hi,
Help me in installing Solaris Express, Developer Edition
When i am trying to install Solaris, system hangs and the moniter is switcher off when the system goes in GUI mode.
i have intel 945GTP mother board with as on board Intel Graphics Media Accelerator Drives , Chipset -> Intle 945G , 160 SATA Hard Disk, 1 GB DDR2 Ram , P4 3.Ghz Processer , on board Intel PRO/100 VE Network Card.
Please,Help me.
Thanking you,
P.Sathish KumarHello,
first of all: Try to run the HCTS (Hardware
Compatibility Test Suite) first, it's available
here:
http://www.sun.com/bigadmin/hcl/hcts/device_detect.htm
l
This you can run from Windows, and it will list all
hardware that has drivers, and all those, that do not
have drivers (including some public domain drivers).
After that, you have the possibility to install
Solaris WITHOUT a GUI, use one of the two "terminal"
modes. The first Is still a GUI, as it only starts X
and opens a terminal, in which then the installer
runs. The second does NOT start X, but runs the
installer on the console. Try this one, and once you
get through that, you can afterwards figure out the
settings of the Xserver.Hi ,
i have installed the solaris using console.
Still GUI is not starting, the moniter is switched off when GUI gets started
I used Hardware Compatibility Test Suite, its say that system is supported
by Solaris.
Should i have change BIOS setting to stated the system
Bye
P.Sathish Kumar -
Should I Install ColdFusion MX7 Developer Edition
Hi, I insalled Dreamweaver 8 and noticed that it had an
additional software of Cold Fusion MX7 Developmer Edition. I have
asked my IT person about installing this on my personal computer
and he said there shouldn't be a problem. My main reason for
installing it is that it appears to have the ability to created
PDFs. My questions is, is this Developer Edition the same as the
Standard Cold Fusion, and would it benefit me to install it?
I am computer knowledgeable, but not about something such as
this.
Thank you.Mimi_Rogers wrote:
> My questions is, is this Developer Edition the same as
the Standard Cold
> Fusion, and would it benefit me to install it?
Yes, Developer Edition is the same as a production licensed
version of
ColdFusion with some throughput throttles. I.E. The developer
Edition
can only be accessed by a localhost (127.0.0.1) IP address
from the
computer it is installed on and two other remote IP
addresses. Any
other IP that tries to access a CFML template on this
computer will get
an access denied error. There are some other throttles on
some of the
other advanced features.
Would it benefit you to install it? Yes, but maybe not as
completely as
you hope. It will let you create PDF's with ColdFusion's many
PDF
features allowing you to develop applications with this
functionality.
Every PDF it creates will have a giant "For Development
Purposes Only"
(Or language to that effect) watermark embedded across the
entire PDF. -
I require Coldfusion 8 Developer Edition but cannot find the link
I specifically require Coldfusion 8 Developer Edition but cannot find the link anywhere. It appears as though links to it have been replaced with the Dev edition of CF10.
I require this for two reasons:
Firstly, it would be nice to be able to develop on my local PC rather than directly on the production site.
Secondly, the CFIDE folder has gone missing and I have been told that copying the one installed from a Dev edition will fix it.
Thank you.This is on Windows 2003 Server 32-bit.
I found the original CF8 install file (coldfusion-80-win.exe) and the update to 8.01 (coldfusion-801-win_updater.exe) and used them to install the Developer Edition onto my local PC.
I then zipped up the CFIDE folder and sent it to the server, and extracted it into the correct place (on my server, it was under C:\ColdFusion8\wwwroot)
I had to change the CFIDE path in the \lib\neo-runtime.xml file to get around the "Could not find the ColdFusion Component or Interface CFIDE.adminapi.security" error.
And now it all works again. Thank you for your advice. -
I have been working on a wedding slideshow for days and have over 3,000 pictures in albums on iPhoto. It suddenly will not open without upgrading to Aperture and I can't find any of my photos!!!! I need these photos, to complete the video, not to mention I don't want to lose them. I have had trouble ever since upgrading to Maverick.
Try the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
2 - Run Option #4, Rebuild Database. -
Won't let me download Adobe Photoshop Trial version. It said "there is no application to set to open the url...." Can't find what app to use?
use a different browser to download.
-
I own Photoshop 5.5 (on disc). My computer has no CD drive. I want to install it...but can't find a download. How can I get this on my computer?
Photoshop 5.5 (shipped 1999)? or Photoshop CS5 (shipped 2011)?
If Photoshop 5.5 then there is no download link.
If CS5 then try Download and Installation Help -
I installed time machine but I can't find it in system preferences?
I installed time machine but I can't find it in system preferences? How do I access it? Light is green but is it backing up?
???
You installed Time Machine or Time Capsule? Time Machine is part of Leopard (OS X 10.5.x). If you are referring to Time Capsule, you set it up via AirPort Utility. You should have the install disk. If you are talking about Time Machine, can you confirm you have OS X 10.5.x? Your signature indicates you only have Tiger (OS X 10.4.11). If that is correct, you need to upgrade to Leopard.
Welcome to Apple Discussions! -
i just installed iLife 'll but i can not find it in my applications. I've tried installing it nearly 10 times with no results. PLEASE HELP!!
i found the original demos of the iPhoto, iMovie, Garageband,
I think you'll find those are the applications you have installed.
Regards
TD -
Do I need to install crystal reports developer edition?
Hi,
I tried to open a CR 8.5 reports in vs 2005 and it opened up fine. But when I try to preview the report it comes up with the error
Failed to load Database information
Details:The Database DLL 'crdb_fielddef.dll' could not be found.
We have used Active Data drivers and Field definitions using ttx files in 8.5. We used the 8.5 developer edition. Will I be able to use the crystal reports for .net with vs 2005 without installing the new version of crystal reports or Do I need to install the developer edition to overcome this? I used the 10.2 version with the VS2005.
Thanks,
SSVS 2005 does not ship with crdb_fielddef.dll, which is the lib used with ttx reports. You won't be able to preview off of a ttx file, or create a new Crystal Report off of a ttx file, using CR.NET shipped with VS 2005.
If you require those functionalities, CR XI Release 2 would be an possible option.
Sincerely,
Ted Ueda -
Help: application I didn't install on computer and I can't find it!
Somehow I ended up with the Opera browser on my Mac. I know I did not install Opera, so I'm wondering if another application installed it. The thing is, it isn't in my Applications folder. The only way I discovered it was there was when right clicking on a jpg and selecting "Open with." And, there are two versions of opera, 9.20 and 9.10. I did a search for "Opera" on my computer (entire computer) and came up with an Opera folder in the "Application Support" folder and an Opera Preference folder in the system "library/preferences" folder.
I deleted those two folders and emptied the trash. However, the option to "open with" Opera 9.10 and 9.20 are still available when right clicking on a jpg. If I then select one of the two versions of Opera, it opens! I'm not sure how thats possible since I deleted everything that I could find related to Opera.
I also noticed that there was an Opera cache folder in the Library/Cache folder... It is named Opera and the search (which included the library/cache folder since it is on my computer) did not come up with that folder... so for some reason searching doesn't really find all things with the name "Opera" in it.
So, I would like to know how it got there, but I'm sure thats next to impossible. I would also like to know where the "open with" options are located so I can see the path to the Opera application it is using. It has to be on my computer somewhere! I want to get rid of Opera completely and can't see how when I can't find the app.
MacPro 8-Core
OSX 10.4.10
Thanks,
JeffGo ahead and let Opera launch. With it running click once and hold the click down for a second or so on its icon in the Dock (or control click on the icon). You should get a menu popping out for the program, that includes the option to "Show in Finder"--select that and a Finder window will open with the application high lighted. You can then quit and remove it. Do the same with the other version you have as well.
Spotlight does not search certain folders. To be sure you found all the pieces you might consider downloading EasyFind from Devon:
http://www.devon-technologies.com/products/freeware/index.html
The "Open With" options are in a cache file which gets modified every time you start your computer: the LaunchServices polls all applications it can find and reads their info.plist file and records what it says the application can open to the cache file. A restart should reset it.
Francine
Francine
Schwieder -
When I try to install a plugin in any browser on my Mac Mini or my MacBook Pro, I get a "Can't find Internet Plug-Ins folder" message. Other friends with the same machines can install the plugin just fine. We can't find any reason why the plugin won't install on mine. Any ideas out there?
Thanks,Triple-click anywhere in the line below on this page to select it:
/Library/Internet Plug-Ins
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can only read" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above. -
Can't install AR 11.0.04, "Can't find specified file."
Presently using Adobe Reader X 10.1.6 on Windows 7 64-bit and get an error messge when trying to install Adobe Reader 11.0.04: "Can't find specified file." However, that file is not identified. Help me to install the updated AR.
Thank you for your hekp as I finally have been able to dl 11.0.04. The dl was successful because following your suggestions I initially kept getting the same kind of error messages saying that I had to log on as an administrtor. Well, permissions with Windows was never my strong spot. Never really understood how to handle them. However, as it was early in the morning and my mind was somewhat clear, I started fiddling around with "Taking Ownership" and Security within properties. First, after Taking Ownership of just about anything having to do with Adobe, I still was getting error messages about logging on as an Administrator...but, I am the Administrator??? So, I then took a closer look at Properties>Security and saw that although Administrator was there, none of the control boxe were x'd out. Taking a bold move, for me at least, I then did an editing and x'd in the control boxes for Administrator. Smooth sailing from then on in as everything loaded as it should have. I think I have finally learned how to "Log in as Administrator." Nonetheless, if there is anything you can add to this saga, please do.
Maybe you are looking for
-
HT2845 how can I get the scroll function to work on my magic mouse?
I got my magic mouse to work perfectly with my macs but I also have a work computer which is a windows vista lenovo. All functions work with the mouse on my pc but the scroll function when I'm in excel which is a big deal for me because I am an acco
-
After 10.4.6 upgrade Print causes programs to quit
After upgrading to 10.4.6 I can no longer print with either an HP1320 or Epson 1280. When selecting the print command in any application (Mail,Word,Text edit,Safari,Preview) I get a message that the application unexpectedly quit. I have the latest dr
-
How to play videos on safari's apple website (msg: missing Plug-in) ?
how do I play the video's on the apple website in safari ? getting 'missing Plug-in' no problems for youtube or other sites
-
Best way to export a huge project?! HELP
i have recently finished putting together a 2.5 hour movie and i do not know which route to take for export. i plan on creating DVDs with iDVD. should i use quicktime movie or quicktime conversion? Thank you for your assitance. Austin StrikerFilmsINC
-
Customer master data updation from one system to another system
HI Experts, I have an issue with customer master data updation from one system to another system. And here only one field is not updating properly from one system to another system. and we found this is through idoc , but we don't find field in any