Opening an MHT file created 300+ tabs
I opened an MHT file from XP SP3 Explorer into FireFox 9.0.1 which opened over 370 tabs which i can't delete other than individually.
I thought of moving them to a new tab group and deleting that, but can't get into the tab group manager.
I also deleted the .MHT file and closing/opening FF; that's when I found out how many new tabs there were.
At the time i didn't have any add-on for MHT's but now i have UnMHT 5.7.0.
Peter
Hi Cor-el, thanks for your reply.
I changed the .MHT Content Type action to 'Always Ask', closed and reopened FF but it came up as before. This time I can open the Tab Group manager but couldn't select a group of icons.
Peter
Similar Messages
-
Since updating last time Firefox will not open new tabs unless I right click on a link. It won't open them via file or the tab at the top of the brwoser or usinf ctrl + t. Anyone know how to fix this?
I can press ctrl for a new tab but otherwise a new tab does not open. I actually need help regarding this new Synch which apparently will be in Firefox automatically in an upcoming version so I am asking how that will synch with people who use LastPass-of course because I use this very successfully and really am not eager to change the set up that I have in place at this time.
I have read through endless FAQ trying to find anyone else who has this question or concern but have found nothing. Can you please tell me how that service will get along with LastPass which does basically the same thing as Synch-it is probably spelled wrong as it looks wrong to me but if I click back to where this issue began, I will lose all of this question so please respond for the upcoming service synch. -
As the latest version of iWeb to open a project file created in a previous version?
As the latest version of iWeb to open a project file created in a previous version?
See this page for how to open a Domain file when using Lion/Mountain Lion...
http://www.iwebformusicians.com/iWeb/mountain-lion.html -
TDMS File Creates Multiple Tabs of Data. Want to create only one.
Hello NI Community,
I am currently using the DAQ Assistant with my string pots to record displacement over a long interval of time (see attached VI). I am then using the "Write To Measurement File" vi to save the data into a TDMS file (see the "Write to File Settings" picture attached for all settings chosen for file write). The file is being written, however when I open the TDMS file, the document creates a tab in Excel for every second of data recorded (please see the attached "). It looks like the TDMS file is grouping all the data from each second together and then creating a new group of data.
How do I get the file to write all the data onto a single tab instead of creating multiple? I do not want to have to concatenate hundreds of tabs into a single excel sheet.
Thanks,
Chris
Solved!
Go to Solution.
Attachments:
Write to File Settings.PNG 40 KB
TDMS File Multiple Tabs.PNG 57 KB
TDMSWrite.vi 108 KBYou should not be using the comment. I just removed that and it all worked for me.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Is there a way to open a .mst file created in the student edition with MULTISIM 9
When a student builds a file with MultiSIM 9, the circuit is created as a .msm file. When the student goes home to work, they can open a .msm file with a student version, 2001 for example, but any change to the file can only be saved as a .mst file. As soon as the file is saved as a .mst file, we have not found a way to open the file with the educational version of MultiSIM 9. Is there any way to convert these files? This makes it very difficult for a student to work at home for a project between or prior to labs.
ThanksJKR,
Unfortunately, the ".mst" extension is supposed to be open only by Textbook editions of Multisim. Not even a Power Pro version would be able to open it.
I'm not sure the specifics of your case, but I guess that you open/saved the circuit on your textbook edition and that converted the file extension, is that right?...
Well, as far as I know the textbook editions are meant to be 'demo' type of releases, so is limited in many features. You should be OK with a Student edition though -- which is not the one commonly found in textbooks.
Nestor
National Instruments -
Hi,
I am on the verge of deleting Firefox from my computer as it has wasted hours of my time, and none of the online trouble-shooting answers are of any help.
Until recently I could open PDF files in my browser window, and today its impossible to open any pdf file, it will not even download if I choose to download it.
This issue has been going on and off for nearly a year, and I downloaded Nitro PDF add-on to solve it previously as the Adobe reader add-on didn't do anything. Today In the options menu of applications where I can select the program I want to open the PDF files with I can no longer find the NitroPDF reader as an option, so I choose the Adobe add-on and no matter how many re-starts it refuses to initiate any PDF files, all I get is a open and empty new tab.
Internet explorer opens PDF files fine, so I know its not computer related.
I am running Windows Vista Ultimate, Firefox Version 19.0.
If there is a way of fixing this, please help because currently I am at the end of my patience.
Regards,
EmreHey thanx for the help, it worked like a charm.
I think firefox changed the application lay out, as I used to be able to choose my PDF opener from the list at " Adobe Acrobat Forms Document' where I could choose Nitro-PDF reader, but it has now moved all the way to the bottom like you suggested to the obvious place of "Portable Document Format" section.
If someone didn't tell me , I wouldn't have scrolled all the way down to be able to find it... it really should be with all its cousins up the top...
Cheers again.. -
Exception while opening a JSP file created using oracle report builder
I have created a JSP page which contains embedded Oracle reports build using Oracle Report Builder.
I have deployed the JSP created above to the Oracle Application Server
but when i try to open the JSP file it gives the following error:
500 Internal Server Error
javax.servlet.jsp.JspException: rwlib-1: REP-1202: ORACLE logon not specified. at oracle.reports.jsp.ObjectsTag.doEndTag(ObjectsTag.java:206) at testing.test1._jspService(_test1.java:75) [SRC:/testing/test1.jsp:0] at com.orionserver[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:567) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)
can anybody help regarding this
this is of high priority to me
thanks and regards
Subhajitbump
-
Error ,opening a tar file created by TarOutputStream
Iam trying to create a tar file using TarOutputStream with the code below :
try {
TarOutputStream tout = new TarOutputStream(out);
for (int i = 0; i < files.length; i++) {
if (files.getPath() == null) {
continue;
File f = new File(wsdir, files[i].getPath());
if (!f.exists()) {
continue;
TarEntry te = new TarEntry(files[i].getPath());
size += f.length();
te.setSize(size);
tout.putNextEntry(te);
try {
FileInputStream in = null;
try {
in = new FileInputStream(f);
byte buf[] = new byte[1024];
int n;
while ((n = in.read(buf)) > 0) {
tout.write(buf, 0, n);
} finally {
if (in != null) {
in.close();
} catch (IOException e) {
e.printStackTrace();
tout.close();
} catch (IOException e) {
e.printStackTrace();
return false;
The above code succcessfully creates the tar file but while opening the tar file Iam getting the error - Error reading header after processing 1 enriesI created a zip file by providing the relative paths
of the files using the java.util.zip package.I
downloaded it through a web application.It was
downloaded successfully and the zip file is showing
100 kb.When i tried opening zip file from windowsXP
SP2 and i am not able to view or extract the
contents.It says 'Windows has blocked access to these
files to help protect your computer'. Go and complain to Microsoft. It's a Windows XP SP2 security feature. Read the manual or help about how to deal with it. It's not a Java problem. -
Hello everyone. I'm having a strange issue that seems to have happened out of nowhere. I use a variety of Adobe Products for work and have been using Illustrator for a few basic brochures (I know InDesign is probably recommended more for brochures, but I just prefer Illustrator).
I actually design them in two files with a "front" and "back." I then merge the PDFs together into one file and send them to the printing company.
Recently, I've been working on one of these brochures. One morning I came into work and attempted to open the "inside" file for the brochure. Unfortunately, I receive an error message that says "Could not open the file." The file was saved as a PDF with Illustrator editing capabilities. I've been working on it for weeks and it only now stopped working. It does open in Adobe Reader as a standard PDF. Just doesn't make any sense to me. The "front" of the brochure opens normally in both Illustrator or Adobe Reader.
On a related (or unrelated?) note, I'm also getting far more crashes lately.
Any thoughts as to what could be going wrong? I've updated all my drivers, Illustrator, my GPU, windows updates, etc...
CS6
Windows 7 Professional
8GB RAM
Intel Core i7
AMD Radeon HD 6350RR,
One thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way (remember to tick Paste remembers Layers in the Layer palette flyout/dropdown first, and to untick it afterwards).
Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
and another similar website,
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
As far as I remember, the former is for Win and the latter for Mac.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
Failing a full recovery, hopefully you have one or more earlier versions and/or bits of artwork saved before it happened. -
Problems opening & printing pdf files created on a Mac
I am at my wit's end! I recently upgraded to a new version of Acrobat and suddenly a lot of my clients could no longer open my pdf files. I uninstalled the latest version of Acrobat and reinstalled an older version (Acrobat 8.1.3). Some clients started being able to open my pdf files but others could not. So I started using the Acrobat Share server and sending links. Some of my clients cannot open those either and many cannot print even if they can open the files that way. I personally also cannot print from the Acrobat Share server. The pdf files print out with all the surrounding graphics and application design elements. I also can't open the pdf files that I created on my Mac using my PC laptop running Vista. I have tried opening and printing both pdf files and the Acrobat Share links from my Mac and my PC laptop running Vista, to no avail.
I was under the impression that compatibility problems between Macs and PCs were largely a thing of the past. I was also under the impression that the whole point of exchanging pdf files was that pdf files are cross-platform compatible. Not only am I am losing tons of valuable time, I may be losing credibility with my clients (especially since I have an IT background). I desperately need to know what version of Acrobat I should be running on my Mac so that when I scan documents into my Mac, the pdf files that are created are completely 100% compatible with both Mac and PC operating systems regardless of what operating system and what version of Acrobat my clients are running. I also need to be sure that those same pdf files I create on my Mac can be seemlessly printed out from either a Mac or PC regardless of the operating system or Acrobat Reader version. If anyone can help me get to the bottom of this, I will be eternally grateful. Thanks.This file downloaded and works fine for me in Preview on both OS X 10.5.7 and 10.4.11 (and opens in Acrobat Pro 9.1.1 and 8.1.5, and the latest version of Reader on both versions of the OS). As expected.
If you're printing from Acrobat.com by right clicking in the image area and selecting Print, don't. This isn't printing the PDF, it's printing the Flash frame that contains, as you've noticed, buttons and other elements. (Adobe's Mac Flash plugin is notoriously buggy.) Direct your clients to download the file by selecting the download button, not by right clicking and printing.
Again, your PDF file is fine. -
Cannot open the .ecs file created already
Hi,
I created an ecs file for the x12 856 5010 version and saved it.later when i try to open it I get the following error
Ecs file corruption.Not enough room in the output error.what is this error message.How do i resolve this
Thanks for you help,
soujiSouji,
Not sure but issue may be related to OS or dot net. Can you try to open the same file in any other machine which has B2B Doc Editor installed? You may also search on Google for "Simple methods to deal with Not Enough Room In Buffer To errors"
Regards,
Anuj -
Can't open Encore CS4 file created on iMac
Is there any way of opening an Encore CS4 project file (created on
a Mac) in the Windows XP version of Encore CS4???
Is this also a problem with the CS5 version of Encore?
Thanks for any help/answers!Unfortunately no. The NCOR files are not X-platform.
Good luck,
Hunt -
Problem to open with PDF file created in acrobat 5.0
Hi,
I always open my pdf files with acrobat 5.0, but now I made the instalation of Acrobat Reader 7.0 and now when I try to open the pdf files I only see blank pages.
There is some option to fix this problem?
Somebody could you help me?
Regards
RodrigoAdobe Reader Lite version 1.5
Basically is as useful as a chocolate teapot. NUL POINTS
I bought PDF+ from www.mBrainSoftware.com fro my Nokia E61
Brilliant
It has opened a 22MB file which is the biggest PDF I have with graphics etc -
Error in opening the PDF file created from the smart form output.
Hi All,
i have a simple smart form which takes 3 values like customer no, name and no of times customer called and gives an out like
Customer 0001000000 with name Ravi called 5 times today.
I have to send this output to mail as an attachment.
for this i am coding as below.
******Call the SSF Function module
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = Form name
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = lv_fmname
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
lv_partner_number = '0001000000'.
lv_name_org1 = 'Ravi'.
lv_z_no_calls_day = '5'.
lw_ctrlop-getotf = 'X'.
lw_ctrlop-no_dialog = 'X'.
lw_compop-tdnoprev = 'X'.
lw_compop-tddest = 'LP01'.
*******Call the Form Function module and get the OTF of form output
CALL FUNCTION lv_fmname
EXPORTING
name_org1 = lv_name_org1
partner_number = lv_partner_number
z_no_calls_day = lv_z_no_calls_day
control_parameters = lw_ctrlop
output_options = lw_compop
user_settings = ' '
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
i_otf] = w_return-otfdata[.
*********Now here if i look in to the OTF data i got in debug it has the data i aniticipated along with some other data.
the output is in the format
TDPRINTCOM(2) TDPRINTPAR(70)
ST XXXX.. customer 0001000000 with
name.....
i have my data in the above format spread in three lines of the output otf table where XXXX... is some number.
***********To convert to PDF Format
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = lv_len_in
BIN_FILE =
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5
*********For testing purpose i created a file on the desktop with the the data in i_tline. it created PDF file but when i tried to open it it's giving an error.
i_objtxt = 'test with pdf-Attachment!'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
READ TABLE i_objtxt INDEX v_lines_txt.
wa_doc_chng-obj_name = 'Smart Form'.
wa_doc_chng-obj_descr = 'Frequent Caller Alert_Day'.
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + STRLEN( i_objtxt ).
*********Creating the Entry for the document
CLEAR i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
i_objbin] = i_tline[.
DESCRIBE TABLE i_objbin LINES v_lines_bin.
READ TABLE i_objbin INDEX v_lines_bin.
i_objhead = 'Frequentcaller list_Day.pdf'.
APPEND i_objhead.
************Creating the entry for the attachment.
CLEAR : i_objpack.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'ATTACHMENT'.
i_objpack-obj_descr = 'FCA'.
i_objpack-doc_size = v_lines_bin * 255 .
APPEND i_objpack.
CLEAR i_reclist.
i_reclist-receiver = 'mail id'.
i_reclist-rec_type = 'U'.
APPEND i_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = i_objpack
object_header = i_objhead
contents_bin = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
This is all i am doing.
It is sending a mail with the attachment but we are not able to open the attachment. it's giving an error like file is damaged and couldn't be repaired.
I serched in the forum but i couldn't get the answer.
I suspect there is a problem in getting the OTF data..
Please help me in resolving this issue....
Thanks in advance.
RKCheck the sample , and see where you made the mistake.
REPORT ZPDF_MAIl.
DATA:
w_fm_name TYPE rs38l_fnam,
w_bin_filesize TYPE i,
w_filesize TYPE i,
w_lines_txt TYPE i,
w_lines_bin TYPE i.
DATA:
wa_ctrlop TYPE ssfctrlop,
wa_outopt TYPE ssfcompop,
wa_objhead TYPE soli_tab,
wa_buffer TYPE string,
wa_doc_chng TYPE sodocchgi1.
DATA:
BEGIN OF t_mail_ids OCCURS 0,
mailid TYPE ad_smtpadr,
END OF t_mail_ids,
t_otfdata TYPE ssfcrescl,
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
t_pdf_tab TYPE tline OCCURS 0 WITH HEADER LINE,
t_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'Z195_TEST'
IMPORTING
fm_name = w_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc EQ 0.
ENDIF. " IF sy-subrc EQ 0.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_outopt-tdnoprev = 'X'.
CALL FUNCTION w_fm_name
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_outopt
user_settings = 'X'
IMPORTING
job_output_info = t_otfdata
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF. " IF sy-subrc EQ 0.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = w_bin_filesize
TABLES
otf = t_otf
lines = t_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF. " IF sy-subrc EQ 0.
LOOP AT t_pdf_tab.
TRANSLATE t_pdf_tab USING '~'.
CONCATENATE wa_buffer t_pdf_tab INTO wa_buffer.
ENDLOOP.
TRANSLATE wa_buffer USING '~'.
DO.
t_record = wa_buffer.
APPEND t_record.
SHIFT wa_buffer LEFT BY 255 PLACES.
IF wa_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
t_objtxt = ' To Change the COR, Use the Transaction ZCOR_CHANGE'.
APPEND t_objtxt.
t_objtxt = ' Check the Attached PDF file for COR'.
APPEND t_objtxt.
DESCRIBE TABLE t_objtxt LINES w_lines_txt.
READ TABLE t_objtxt INDEX w_lines_txt.
READ TABLE t_objtxt INDEX w_lines_txt.
wa_doc_chng-obj_name = 'COR Display'.
wa_doc_chng-expiry_dat = sy-datum + 10.
CONCATENATE 'COR' "w_cornr
'-' "w_stat_descr w_action_desc
INTO wa_doc_chng-obj_descr SEPARATED BY space.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = w_lines_txt * 255.
CLEAR t_objpack-transf_bin.
t_objpack-head_start = 1.
t_objpack-head_num = 0.
t_objpack-body_start = 1.
t_objpack-body_num = w_lines_txt.
t_objpack-doc_type = 'RAW'.
APPEND t_objpack.
t_objpack-transf_bin = 'X'.
t_objpack-head_start = 1.
t_objpack-head_start = 1.
t_objpack-head_num = 0.
t_objpack-body_start = 1.
DESCRIBE TABLE t_objbin LINES w_lines_bin.
READ TABLE t_objbin INDEX w_lines_bin.
t_objpack-doc_size = w_lines_bin * 255 .
t_objpack-body_num = w_lines_bin.
t_objpack-doc_type = 'PDF'.
t_objpack-obj_name = 'COR'.
t_objpack-obj_descr = 'COR Test'.
* concatenate 'COR' w_cornr into t_objpack-obj_descr
* separated by space.
APPEND t_objpack.
*LOOP AT t_mail_ids.
CLEAR t_reclist.
t_reclist-receiver = 'INTENATEMAIL'.
t_reclist-rec_type = 'U'.
APPEND t_reclist.
*ENDLOOP.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = t_objpack
object_header = wa_objhead
contents_bin = t_objbin
contents_txt = t_objtxt
receivers = t_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc EQ 0.
ENDIF. -
How to open a idml file created by CS6 in CS5?
I created a file in InDesign CS6 and saved as idml file yesterday.
But today I can not open either in CS6 or CS5 version.
It says
"Cannot open the file "Project #3.idml". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."
Is there anyother way could open this file?I chose from the drop-down list.
Maybe not.
Anyway, thank you very much!
Maybe you are looking for
-
Remote not working with MBP lid closed
My MBP OSX 10.8.2 is plugged in using the charger and connected via an HDMI adapter to my TV. Apparently, the MBP will work in clamshell mode only if connected to a display and connected to a The Apple TV remote controller works fine if the lid is o
-
How do I stop iTunes reverting my TV series details?
I have a lot of TV series in my iTunes library and I like to keep things organised and easy to find. Sometimes this means adjusting details myself. For example, the current season of Doctor Who is sold by iTunes as Season 8. But there was also a Seas
-
Is there anyway of getting owb to implement the following sql without resorting to using a insert update operation: insert into desttable (select * from myview where not exists (select null from b where desttable.emp_id=myview.emp_id) This sounds alm
-
Can we run KSU5 - Assessment Cycle execute for previous periods
Dear Gurus, Can we run KSU5 for previous periods. Means I have not ran from April 2008 onwards. Can I run right for all periods. Any inconsistencies arises for running the KSU5. Please guide us. Regards Srinivas
-
Upgrade linux Red Hat version 4 to Red Hat version 5 on an appliance CWWLSE-1130-K9
Hi. I have a WCS 5.0 installed on an appliance CWWLSE-1130-K9 to Red Hat Linux 4.0. I need to upgrade to Linux Red Hat version 5 in order to use WCS version 6.0. Does anyone know the procedure to do it?