Opening and closing files very slowly -MAC - Batch processing broke illustrator...

I have been batch processing between 15 and 30 thousand svg files over the past few days(simply centreing the orbjects on the art board mergring overlapping objects and saving as AI's) - the individual files are very small 20kb max. this was working fine for a while but suddenly illustrator now takes nearly 30 seconds to open any one individual file - svg or otherwise - and also when I look at illustrator in activity monitor as files are opened illustrator uses 100% of the CPU.
I have no Idea if this is related to all of the batch processing Ive been doing lately but Its the last thing Ive done so...
Also I have run disk utility on my machine uninstalled and reinstalled illustrator with no success..
Anyone have any thoughts?
Thanks!!

Have you tried at least restarting AI or rebooting the computer?

Similar Messages

  • TS3212 ipad typing and opening and closing files on it own

    ipad typing and opening and closing files on it own. how is this fixed

    We tried that - it didn't work. We have phoned the nearest Apple store, where we bought the tablet. I see another 125mile excursion in our near future.
    PS- When we phoned Apple support, we struggled to explain ourselves to a call center employee who simply could not understand American English. Apple, many large companies stopped using call centers in Mumbai because of the language difficulty - you should too.

  • Opening and closing files

    I'm currently writing a financial tracking program for the mobile phones and since I need a number of files to work with each time, my idea is to work with only one file opened at a time (since I don't want to open too much files that could slow down the phone). My question is, is it possible to open/create a file and close it, and then open it and close it everytime I need some info from the file? If it isn't possible, is there any other way to do this? Any suggestions will be appreciated.
    Thanks.

    I assume that you mean "record stores" as opposed to "files" in your question as you mention that you intend to use RMS . Your MIDlet Suite can open/create record stores using the method openRecordStore which returns an object of type RecordStore. There are a number of methods that can be used on this return value for more detailed access. RecordStores are closed with closeRecordStore method that only completes if all outstanding opens have been matched with a corresponding close operation.
    Hope that helps!
    MJ

  • PeView open large pdf File very slowly!

    I have a pdf file with 422M,On the OS 10.9 preview it very easy,very fast and no noise with fan.
    when updated OS 10.10,preview it very slowly, the fan more fast and more noise,why? it's back!

    Reader is a pretty good tool, but it isn't designed to check validity specifically; then again, nor is anything else.
    Can you share the URL of the file?

  • Opening and closing folders very difficult while organizing projects

    Alo,
    after importing my iPhoto Library to Aperture, I'm working through the mass list of iPhoto Events, now projects.
    Each time I move a project from the iPhoto Library folder, to a folder that I've created, the very quick spring loaded action takes over, and opens the folder I'm planning on dropping the project in, which, while useful in dealing with nested folders, this is not a preferred behavior for me right now.
    Is there any way to adjust the spring loaded folder behavior in Aperture 3
    Is there any way of opening/closing those folders quickly via the keyboart/any way other than clicking triangles.
    Any workarounds to avoid having folders open when moving projects around?
    I'm moving several projects at once, and will continue to do that to minimize my pain.
    it wont be a huge problem once I get everything mostly organized, but I've still got a ways to go, so it's worth asking about.
    thanks!

    Use the Apple Key, to select two or more Projects, to be merged in to one. Then go to File>Merge Projects. Allan

  • PDF files opening and closing slowly in Acrobat version 9.5.2.

    I am running Acrobat 9.5.2.  Last week our server died at work and we converted to a new one.  Since then pdf files have been opening and closing very slowly, sometimes taking 15+ seconds to close.  Strangely enough, if you open and close several in a row then they usually open and close quickly with some exceptions, but if you wait 10+ seconds and then try to open or close one it takes forever.  This happens whether or not the machine is connected to the server.
    I tried to do a repair, however it said that it could not connect to the my documents folder at the old server location.  When I originally installed Acrobat, it was done through my University and not while I was even connected to my work server, so that is confusing to me.  Please help, as I use pdf's constantly and this is really slowing me down.

    It doesn't seem like an Acrobat problem per se but a problem with they way your computer is configured to reach the new server. Perhaps you need to have someone come and look at how your computer is configured to reach the new server.  It could also be a problem with how the university configured their server. Server issues are something that cannot easily to diagnosed remotely.

  • Mac OS 10.7 Server won't mount DMG's after opening and closing - "Resource Temporarily Unavailable"

    I am running Mac OS 10.7.3 Server on Mac Pro 2 x 2.66 GHz 6-Core Intel Xeon with multiple users editing on Avid.
    DMG's containing raw camera footage are stored on the server, mounted by connected users on their desktops to allow Avid to access the enclosed data within the DMG's. Recently we've started encountering a problem opening the DMG's after they've recently been opened and closed. After opening and closing a DMG. when we try to open it again from the same user/connected computer or any other user/computer we see an error message saying "The following disk images couldn't be opened" NAME OF DMG "Resource temporarily unavailable". This happened to several users with several DMG's.
    We have since restarted the server, which appeared to fix the problem for about a week and now we are having the same issue again.
    The only changes made recently have been an update to version 4.2 of our ISIS 5000 which all of the Avid systems edit off of, but I don't beleive that to be the cause of the DMG opening issue. I suspect it might be caused by the Pram still thinking that the DMG's are open when they've already been closed.
    Not sure if this is relevant, but we had been running only Mac OS 10.7 systems connected to the server but within the last few months we've been adding several more systems including those with OS 10.8.
    Has anyone else encountered this issue? Does anyone know the fix to this problem?
    Thanks for any and all help!

    Also, we have been able to copy the DMGs to desktops and external drives, which normally would not be possible when a DMG is currently open by another user which is the standard situation in which a DMG would say "Resource Temporarily Unavailable".
    After copying to another location, they open normally so we believe it is an issue isolated to the server itself.
    Thanks!

  • Combine supported files is not automatically opening and closing source applications?

    On my Vista 64 machine, suddenly, the "Combine supported files in Acrobat" has begun malfunctioning. Instead of automatically opening and closing the source application (such as MS Word), Acrobat opens the application and then asks to save a new PDF file for each source file and stalls out the conversion. This problem is not happening on my Win XP machine. I have used the 'Repair Acrobat Installation' function but the problem is not corrected.
    Thanks for any suggestions.

    Just to close out this thread, the bug was fixed with the latest version of Acrobat Pro Extended (9.3.3).

  • I downloaded the new version of bridge and it wont open the raw files on my mac.

    I downloaded the new version of bridge and it wont open the raw files on my mac.

    hello and thank you for your suggestion. I have tried it and, when trying to open a program which I previously was able to, still get the following message:
    Remote XUL
    This page uses an unsupported technology that is no longer available by default in Firefox.
    Please contact the website owners to inform them of this problem.
    Seems unbelievable that I previously had no problem and now I do. Have you any suggestions to overcome this? Do you think I can go back further in Firefox history to get a version that will make it possible to access this. Many thanks! Lynn

  • HT1338 I cannot open any pdf files on my mac book air.  I used to be able to.  I downloaded osx mountain lion and it still doesn't work.  any suggestions?

    I cannot open any pdf files on my mac book air.  I used to be able to open them.  It was suggested that I get OS Mountain Lion and I did.  still can't.  Any ideas? 

    You can download Adobe Reader from adobe.com.  The Mac OSX uses its "reader" to open PDF files without the Adobe Reader.  If you downloader adobe reader, it should open all PDF files.  Hope this helps.

  • MacBook Pro is operating more and more slowly in opening and closing, opening and closing programs and accessing and closing from mobile broadband.  Is there a solution to this problem?

    MacBook Pro is operating more and more slowly in opening and closing, opening and closing programs and accessing and closing from mobile broadband.  Is there a solution to this problem?

    Did you try rebooting?

  • My Mac book pro screen is losing contact during opening and closing. Can someone help me. It is 3 month old!!

    _My screen is losinc contact during opening, and some sparcles appered. Mac book pro is few months old. Is anyone having some sugestion? In the service said that they need 10 days for diagnostics only!!, and I am in the middle of some important presentation, and cant afford to be without Mac book for that long

    You need to be more clear about what you are asking.
    What are these 'sparkles' do you mean when you closed the macbook, sparks appear?

  • Reg: Open and Closed Activities in DTR

    Hello Guru's,
    I am confused with the Open and Closed Activities in DTR, What are the significance of these activities?
    And when does an Open Activity changes to Closed Activity?
    And why does an Empty Open Activity gets created?
    How does the Open Activities effect the Performance of the system?
    In NWDS what is the significance of the Public Part and the dcdef xml files?
    Please explain and if possible send the links to better understand these? I tried searching for info but with no luck.
    Appreciate the Help.
    Thanks & Regards,
    Pramod

    Dear Pramod,
    Activity in general can be considered as the wrapper of your changes.
    While working in NWDI, any modification that you perform on your source code must be associated with an Activity.
    Some Definitions:
    Client DTR: Represents the Local Track file system present on you local machine, where Checked-out a desired code from Server DTR
    Server DTR: Represents the Central Repository present on the server, where your source code is checked-in.
    Open Activities
    These are the activities that are not yet checked-in to Server-DTR, and they represent the Open Version.
    Exmple:
    1) Suppose you have made some modification in "File A" which is associated in Activity-1
    2) When you open the DTR Perspective in your Developer studio, you will be able to see all the changes that you have associated in the Activity-1, this DTR-perspective of your NWDS is also termed as Client-DTR.
    3) But, when you open the Server-DTR in DTR Web interface, you will not be able to see the same file structure that is present in your client DTR, it will not contain the changes that you have incorporated in Activity-1.
    4) The changes present in Activity-A are not available to any other developers, even if you try to use the same developer ID and load the same track, the activities are still said to be purely Local.
    Closed Activities
    These are the activities that are already Checked-in to Server-DTR and they represent Closed Version.
    Example:
    1) In the same example explained above assume that we now Check-in the Activity-1.
    2) Now, if you open the Server-DTR in DTR Web Interface, you will be able to see the same file structure that is present in your Client-DTR.
    3) Now the changes that were present in Activity-A are also available to other developers too.
    Open Activity and Performance
    1) Open Activities create a temporary entry point reference on the Server DTR you can serach for open activities in Secer DTR web interface, every single activity occupies space on your local machine. So it may affect the performance only if the activity count is very high.
    2) In the local file system, the meta data is stored in the .dcdef file in the _comp
    subfolder.
    3) The meta data is stored in the .dcdef file, every public part has its own meta data file. They are located in the def subfolder of the component and have the fileextension pp.
    Every component (DC) is defined by a set of files, stored and versioned together with the
    component in the repository.
    u2022 A file with the reserved name .dcdef stores the basic attributes such as name,
    description and component type, the parent component (if there is one), a list
    of child components (if there are any), a list of dependencies, links to the component
    sources, and the access control list. The .dcdef file must be stored directly
    in the _comp folder.
    u2022 The folder _comp/def contains one file for each public part of the component,
    which carries the name of the public part with the extension .pp. This file contains a list
    of the development objects belonging to the public part and an access control list for
    this public part.
    Both .dcdef and .pp files are stored in an XML-based format; you can display them in the
    content display of the Repository Browser or with any text editor. However, this is
    not necessary. To create and edit these files, use the component tools of the SAP NetWeaver
    Developer Studio.
    In exceptions, you can manually repair the .dcdef or a .pp file of a component.
    Note that direct manipulations are dangerous and can render a component
    unusable.
    I hope you will get a clear picture now.
    Regards,
    Shreyas Pandya

  • How do I port my Windows Word, Excel, and Powerpoint files to the MAC?  What software is needed on the MAC to use them?  Thanks.

    How do I port my Windows Word, Excel, and Powerpoint files to the MAC?  What software is needed on the MAC to use them?  Thanks.

    You can certainly use iWork, though I hesitate to recommend it to a seasoned Windows user simply because it would add another level of the unfamiliar with which you would have to gain familiarity. The iWork applications are certainly very competent and in most respects both easy to use and surprisingly powerful. They are not 100% compatible however, though that typically manifests itself in document formatting issues rather than anything more significant.
    I have never attempted to import emails from a Windows system into MacOS - other than in Outlook connected to an Exchange server, thus not really an issue at all. I doubt that the Mail app in MacOS can import directly, but of course you could always set the account(s) up on the Mac and then forward emails you want to keep from the PC. Not elegant, but it works. Virtually any Windows document or file, whichever application created it, can be opened or converted for use on a Mac, and using both systems on my desk each day I rarely see any issues switching stuff from one machine to the other. You may stumble over one or two issues, but likely not significant.
    In switching platforms there will be some inevitable issues, not so much with being able to import your stuff because there's usually a workaround or a utility that can help, but just with getting familiar with the platform and the differences between Windows and MacOS that can obscure their similarities. From time to time the support community here hears from a user who has found the migration very problematic and regrets it, but for the most part the phrase 'I should have done this years ago...' is rather more prevalent!

  • Finder doesn't stop opening and closing!

    Help!
    I was playing Sims 2 (an addiction) a few minutes ago, and I took some video captures. When I tried opening and viewing them on Quicktime, OS X started acting up. Finder won't stop opening and closing now, it opens and closes almost instantly. It all started happening when I tried opening Quicktime. I tried searching Apple.com, and the web for answers and I haven't had any luck. My system's specs are:
    Mac Mini 1.42Ghz
    1GB of RAM (recently installed)
    Mac OS X Tiger 10.4.7
    At the time the problem occured, I was running AIM, Sims 2, and Quicktime. This has never happened before. I tried Shutting Down and coming back again but it kept doing it. I removed the Sims 2 CD and shut down and after awhile turned it back on, still on going. Right now the computer went into Screen Saver mode and I can see the cursor blinking in and out...
    Please help this is really frustrating...
    Mac Mini 1.42Ghz   Mac OS X (10.4.7)   1GB Ram

    See if you can boot up in safe mode. To do so, restart and hold down the shift key until it boots. It will take longer to boot because it will be running a file system check while booting so be patient.
    If that helps try rebooting again the normal way.
    If the problem comes back when you boot the normal way then reboot in to safe mode again and then try deleting the finder preferences file. Instructions on how to do this are available here:
    http://www.thexlab.com/faqs/finder.html
    I would then do some basic maintenance on your Mac as outlined in the following FAQ, just to be on the safe side.
    http://www.thexlab.com/faqs/maintainingmacosx.html

Maybe you are looking for