Opening aperture files with lightroom 4 in mountain lion

After changing to Mountain Lion have not been able to open files from Aperture library in Lightroom 4.
Has anyone experienced this? Solutions ??

You have said several time that you have been 'not able' to open files without giving any hint what problem you are haveing.
As I said, to access Originals from Aperture, export them.
If an Original is accessed by Aperture as Referenced, meaning that the file is stored outside the Aperture Library, then it can be used where it is. But be careful with originals that you intend to still use in Aperture. They should not be move, renamed, deleted, or altered without Aperture's "knowledge".

Similar Messages

Anyone else not able to open avi's with quicktime after downloading Mountain Lion??

I have an intel iMac with QuickTime Player (Version 10.2) and no .avi that I have tried to open up (that I have aquired SINCE upgrading to OSX Mountain Lion) will play. All my old .avi movies will work but no new ones. Anyone else having these issues?

Anyone else having these issues?
My system generally works the same now as it did before the upgrade as far as AVI files are concerned—i.e., some "supported" files play in the QT X Player and all "supported" files play in the QT 7 Player.
All my old .avi movies will work but no new ones.
Since AVI is a file type, the real question here is whether or not both old and new files contain the same compression formats and if different, whether or not the non-playing compression formats are supported by by your codec component configuration and in the AVI file type. To test the possibility that certain codecs are no longer compatible with QT X v10.2 in the AVI container, try playing the problem files in the QT 7 v7.6.6 player app.

I cannot open PDF files with my Mountain Lion system. What APP's do I need?

What Apps do I need to open PDF files with Mt. Lion installed?

Double-click the PDF and it should open in Preview.

How to open NRW-files in Lightroom 4?I

just bought Nikon's Coolpix P7800. It says you can shoot in Raw. Now I want to open these files in LR, just like I'm used to with my SLR's. But Nikon uses the NRW-format for Raw and LR says it doesn't recognise the files. Does someone know if there's a way to convert and work with these files in LR 4?

Thanks Jim for your response,
I will upgrade to 5.3
Kind regardsEut van Berkum
Op woensdag 28 januari 17:04 2015 schreef JimHess <[email protected]> het volgende:
how to open NRW-files in Lightroom 4?I
created by JimHess in Photoshop Lightroom - View the full discussionThe only way to use those files with Lightroom 4 is to convert them to DNG using DNG converter 8.3 or higher. The camera wasn't supported in Lightroom until version 5.3. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7140310#7140310 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7140310#7140310 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Can photoshop CC open raw files from Lightroom 5?

Trying to open raw files from Lightroom 5 in Photoshop CC 2014, with no luck.
Anyone?

Problems are as follows— all versions are current.
1. When in Lightroom, trying to open a photo in Photoshop,-- choosing Photo>Edit in Photoshop CC 2014— Photoshop opens but no photo appears. The only time a photo opens is if it is a JPEG… CR2 does not open, dng does not open
2. When trying to open a JPEG in Photoshop, dialog box opens offering choice between "Edit Original", "Edit a copy", or "Edit with Lightroom adjustments", Only choosing “Edit Original” allows photo to open.
3. When in Photoshop choosing “Browse in Bridge” does not open Bridge… opens CC app and prompts me to install another version of Bridge, or keep version I have. (See attached screenshot) Either way it’s a malfunction… as I said earlier all versions are leanest.
PLEASE HELP!!
Steve

How to open a file with the extension x3f (sigma)

how to open a file with the extension x3f (sigma)?

RAW data from the following Sigma cameras is currently supported:
DP1
DP1s
DP2
SD9
SD10
SD14
If your camera is among these, then simply import the photo as usual. https://helpx.adobe.com/lightroom/help/importing-photos-lightroom-basic-workflow.html

Unable to open d800 files with cs6 and camera raw 8.3

unable to open d800 files with cs6 and camera raw 8.3

Have you used Nikon Transfer on those files? Early versions are known to corrupt files so that ACR can't read them. Nikon has since fixed the bug so new versions are safe.
Here's a thread (with a fix) in the Lightroom forum: https://forums.adobe.com/message/6253962

Opening a file with FILE_SHARE_DELETE mode (Only on Windows)

Hi,
We have an application that imports logs from several 3rd party vendor's applications. Basically what we do is import the logs in real time, i.e we do have a live FileInputstream connection to the log file. Now, when the 3rd party applications that rotate these logs (many of them do when they grow big or scheduled periodically), all unix flavors dont see to have any problem, while the windows does complain that the device or resource is busy and the original application is not allowed to rotate it. When i dug into the native code of windows jvm, i found that the file is not opened in the FILE_SHARE_DELETE mode and only with FILE_SHARE_READ and FILE_SHARE_WRITE modes. When we wrote a separate C++ application the opens a file with FILE_SHARE_DELETE mode, we found that the logs are rotatable.
Now, how can we instruct the JVM to open a file with FILE_SHARE_DELETE mode? Is there any such implementation already or do i have to come up with another class extending the FileInputStream and use a totally different open method where the file is opened with this mode in the native code?
Thanks
Manava

Hello,
I think you can write :
Runtime.getRuntime().exec("start.exe " + MyFileDialog.getDirectory() + MyFileDialog.getFile());
So, "start.exe" choose the application (not valid for NT machine), ".getDirectory()" return the PATH and ".getFile()" return the NAME.
Best regards from France
Thierry

Can't open a file with spaces on the filename.

Lets say I have a file:
/home/orv/Open - Me - Please.txt
When I double click to open that file with any program, the result is something like this:
"Unable to find /home/orv/Open%20-%20Me%20-%20Please.txt"
I'm not sure what to call that process of converting the file name so I've been unable to google it up to find a fix or a way to change the behavior of the file manager.
I've checked the settings in Nautilus and nothings there. Any clues? Thank you!
Last edited by orv (2007-12-14 23:11:59)

I tried removing everything in my home directory to erase all settings, still the same problem.
I tried using a different file manager and still the same problem.
Here's another example of my problem and its quirks:
Lets say I have a file called:
/home/orv/I am a Movie.avi
In nautilus or thunar, double-clicking that file so I can play it with Mplayer will give an error:
Failed to open file:///home/orv/I%20am%20a%20Movie.avi
However, when I drag and drop using the file manager into Mplayer, it works.
So my problem is this automatic conversion of whitespaces into the %20 which I don't know how to turn off.

I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

# Question
I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

You probably have not seen anyone reporting the exact same problem as you. All three crash reports have the same crash signature and as currently ranked 67 it is not the commonest of reasons for a crash.
I hope you enter your email contact information when reporting crashes. I note you see this crash when using videos, others may possibly see this crash in other circumstances.
You have already tried the obvious, attempts at a fix so it is now down to wait and see, maybe developers working on the bug will report something or fix it.
Did you try my suggestion of installing portable ESR ?
For forum cross referencing purposes
* Crash Reports for Crash IDs <br />bp-71697f5d-41d4-48ae-9db9-3e6302130607<br /> bp-6e1347bc-153f-433a-9c35-a5f022130607<br /> bp-92a533a2-9e09-4c1e-8df7-deb4c2130607
*(all three) Crash Signature: EnumSoftwareMFTs(_GUID const&, unsigned int, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, IMFActivate***, unsigned int*)
* Related bug 858667 NEW crash in mozilla::wmf::MFTEnumEx @ EnumSoftwareMFTs
*I note this was first seen in Fx21 and is 100% Windows 7
<br />

I am unable to open files on amything!!! a box pops up that asks me what do i want to open the file with..every time!! I want files to open when i click on them!! This happens with emails, websites, everything

I try to open attachments in emails and they will not open! A box comes up asking 'what do I want to open the file with', and it wants me to select from a list of options like - Firefox, IE, Word, Yahoo Browser. When I make a selection (usually Firefox) a new tab opens with a blank page! This always happens on attachments, links, websites......everything!

These files were lost two years ago.
That's not consistent with what you wrote in your first message. I can't help you unless I know what's going on. Either you do, or do not, have backups of all the data you want to keep. If you do not, then the first thing you need to do is back up those files. It makes zero sense to do anything else. In order to back up, you'll need either of two things: another Mac, in working order, with a FireWire port and enough space on its internal drive to hold your files; or an external drive, also with enough space.
On the other hand, if you do have backups, or if you simply don't care about any of the data, then the solution to your problem may be quite simple. All you have to do is boot from your installation disc (your profile says you're running Mac OS 10.5), erase your internal drive, reinstall the Mac OS, then restore your data from backup. You will need to be selective in restoring software, because incompatible software may be what caused the issue.
But it's also possible that you have a hardware failure, in which case you can't get your computer working again until it's repaired.

Error in opening a file with name in chinese characters with Runtime.exec

The issue at hand is when I try to open a file with file name containing chinese characters in a localized environment in Windows through the following java code:
Runtime.exec("rundll32 SHELL32.DLL,ShellExec_RunDLL {File_With_FileName_containing_Chinese_character}");
the following error is thrown by windows.
Cannot open file "C:\??.txt".
with the exception
java.io.IOException: CreateProcess: [Ljava.lang.String;@f5da06 error=2
        at java.lang.Win32Process.create(Native Method)
        at java.lang.Win32Process.<init>(Win32Process.java:66)
        at java.lang.Runtime.execInternal(Native Method)
        at java.lang.Runtime.exec(Runtime.java:566)
        at java.lang.Runtime.exec(Runtime.java:428)
        at java.lang.Runtime.exec(Runtime.java:364)
        at java.lang.Runtime.exec(Runtime.java:326)
        at Launcher.main(Launcher.java:26)
When I try to use the same command (shown below) from the Windows Run command, the file opens sucessfully
rundll32 SHELL32.DLL,ShellExec_RunDLL {File_With_FileName_containing_Chinese_character}
Please suggest.
Thanks in advance

This may be a file association problem. To solve that:
In Windows 7:
1. Right-click the file,
2. Select "Open With"
select [Your Program Here]
3. Check always use this program.
In Windows XP:
1. Locate the file as you have described above
2. Right click the file
3. Select Open with from the pop-up menu
4. Click Choose default program…
5. Select Excel in the Recommended Programs box
6. Check Always use the selected program to open this kind of file
7. Click on OK.
1. Make Excel not available from Office 2007 listed under Programs and Features in Control Panel.
2. Take a registry backup using the steps given here
3. In the registry editor window expand HKEY_CLASSES_ROOT and navigate to .xls right and delete it.
4. Exit Registry Editor
5. Undo Step 1 to make Excel available.
6. Restart the computer and verify it the issue is fixed.
If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Cheers, Shane Devenshire

Opening a file with custom FileDialog. (VERY URGENT)

hi everybody,
I have a problem and stuck. I have developed a MDI application that provides all function like open saved files, create new, edit and lots of other. It only opens, save ,edit etc the graphical diagrams inside JInternalFrames. I have an icon on my desktop when clicked opens this Application. Just like Editplus, Word or some other application when you click on the icon it opens that. Same way I have created such functionality.
Now instead of this I have created a custom FileDialogfrom which the user selects this application and is opened. Now I have small icon for this FileDialog on the desktop when opened gives the interface to select the files to be opened. My FileDialog just looks like the FileDialog but some more functionality and more components like JComboBox, Jlist, JtextField, JButtons etc. in it and have removed some of them. I am extending JDialog. But now my probelm is when you select a file and click open, it should open the selected file. How can I achive this functionality in my custom FileDialog as I am not extending FileDialog and as it is built in the FileDialog. How can I open the files with any extension in it's related application e.g .doc files to be opened in MicrosoftWord, .txt to be opened in notepad, .c or .cpp in Visual Studio C++ etc.
How can I put this kind of functionality in my custom FileDialog. It's really important for me please any comments will help me alot. Thanks for the help

Hello,
I think you can write :
Runtime.getRuntime().exec("start.exe " + MyFileDialog.getDirectory() + MyFileDialog.getFile());
So, "start.exe" choose the application (not valid for NT machine), ".getDirectory()" return the PATH and ".getFile()" return the NAME.
Best regards from France
Thierry

I have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2

i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
now the things i want to use with my mac that i thought would be even simpler...are not even useable...
help

That camera shoots H.264 in an .avi wrapper.
You will have to transfer the files via the Finder.
Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you.

How to open a file with a link ?

I am using servlets to design an application.
The application supports uploading and downloading of .DOC and .RTF files.
My problem is that I am opening an uploaded file via a link.
OPen File
The above is also working fine and opens the file in the IE browser.
But my problem is that I want to open the file with MS-Word...as is done on many resume-building websites.
1) How am I supposed to do that ?
2) Can I specify ContentType="application/msword" in a link ?
Please Help !!

I did the foll. w.r.t a docbase.
A docbase stores documents and assigns an unique id to each one. The foll. is a code snippet that opens a document's contents in a browser.
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
Connection conn = null;
Statement stm;
ServletOutputStream sos = null;
ResultSet res;
// .... get id of document u want to open
query = "select id from .. where object_name = ' xx' .."
res= stm.executeQuery(query);
Blob blob = res.getBlob("_content"); // this will get content of document identified by id
int blobLen = (int)blob.length();
//the foll. is the part u need..
if (blobLen > 0) {
InputStream contents = blob.getBinaryStream();
response.setContentType("application/msword"); // MS Word
byte[] buf = new byte[blobLen];
int length = -1;
       while ((length = contents.read(buf)) != -1){
          sos = response.getOutputStream();
          sos.write(buf,0,blobLen);
sos.flush();
System.out.println("Doc Received");
contents.close();
res.close();
conn.close();
}

Opening aperture files with lightroom 4 in mountain lion

Similar Messages

Maybe you are looking for