Opening Balance to be displayed along with line items

Dear Experts,
Is there any way to display Opening Balance for a particular GL along with LIne Items. FS10N only provides Period wise opening balance and line items. If I have to select the line items for a GL in the middle of the period and see the opening balance, how is it possible. In FBL3N i am able to see only line items and no opening balance.
Any suggestions.......................
Raj.

Hello,
FS10N you will see the balance and then double click on that to see line item. Again at line items you will not see the opening balance. There is no such facility.
If you want period wise balances, then go with
S_ALR_87012172 report.
Regards,
Ravi

Similar Messages

Customer/Vendor A/C with line item details and with opening and closing Bal

Dear Sir / Madam,
Is it possible to have a customer and / or vendor Sub-Ledger account-
with line item details and with opening and closing balance detail
for a particular period.?
Regards
Chirag Shah
I thank for the given below thread which has solved the same problem for G/L Account
Re: Report to get the ledger printout with opening balances

Hello Srinujalleda,
Thanks for your precious time.
I tried the referred T-Code
But this report is not showing Opening balance, closing balance detail.
It only gives transactions during the specified posting period and total of it.
Please guide me further in case if I need to give proper input at selection screen or elsewhere.
Client Requires Report in a fashion
Opening Balance as on Date
+ / - Transactions during the period
= Closing Balance as on date
As that of appearing for G/L Account by S_ALR_87012311
Thanks once again & Regards
Chirag Shah

Difference in GL Balance display and GL line item display

Dear All,
Can any one help me why the difference between GL display and GL line items display?
Thanks in advance
regards
Elan

Hi,
You can do the following:
1. carryout gl balance carryforward from previous to current year : Use t.code:F.16
You can cross check the fs10n balance with FBL3N balance from previous years. Assume these balance are matching for previous year 2007 and 2008, you have this problem only in 2009, then you can carryforward this balance from 2008 to 2009 once again. Some times users may post some adjustment entries as per the auditors recommendations. If this balance is not matching from 2007 itself, then first carryforward the balances to 2008 then 2009. You can run this transaction no of times.
2. check the master data of gl account through t.code:FS04, whether any changes has been done to line item display field?
If you find any changes to line item display field then run the program "RFSEPA01" to get all the line items.
3.If your issue was not resolved even after the above two activities, then let me know the sap version you r working.
all the best
Prasad

How to make plant default on the line item along with the item category

Hi All,
I want to default Plant on the line item along with the item category.In order to meet the following scnario.
1. I have two plants,first plant is maintained for the valuated item and the second plant is maintained for the non valuated item (Free Goods).
Whenever user is entering an item in the sales order for which corresponding free goods item is maintained in the master record.System is proposing two lines items in the sales order.
First line item is the main item which appears along with the Plant 1 which contains valuated items
Second line item is for the Free of charge item which is being proposed from Plant 2, which contains the non valuated items.
I want that the system should always propose Plant 1 with main item and Plant 2 with the Free of Charge item by default. (Along with the item category TAN and TANN)
Rahul

Delivering Plant is determined in the following order
1. Customer material info record.
2. Customer master
3. Material master.
Use one of them an default your plant.
I think in your case you can use the materila master which will give an item level plant different. The other two will default the plant at the header level.
regards
jude

GL account with line items in line type 'S' document split?

Hi Experts,
We found in PCP0 there are payroll documents which has GL account with with line items in line type 'S' document split. Unlike other line items with line type 'blank' these line items cannot be opened and display the wage type details. How can we know from which wage type these line items were created?
Regards,
Allan

These line items are caused by company transfer and they are cleared by themselves between companies.

Transaction KSB1 - Display Actual Cost Line Items for Cost Centers

Hi,
When I run transaction KSB1 - Display Actual Cost Line Items for Cost Centers, all my offsetting accounts (accumulated depreciation accounts) are shown except for the ones for asset classes:
- Buildings
- PC & Small Applications
On the FI side, I can see transactions being posted to their relative accumulated depreciation accounts but I do not see this on the CO side when transaction KSB1 is executed. I have checked the config and the account assignments look correct. Also, the assets created have cost centers assigned to them.
Could you please help!
Thanks,
- Deki

Hi Murali,
I have one depreciation expense account (P/L Account) which is also a cost element.
During depreciation run, the different asset classes are supposed to hit the depreciation account above and their corresponding accumulated depreciation accounts (These are Balance Sheet Accounts and I have separate accounts for each asset class .. ie: Accumulated Depreciation for Furniture and Fixture for asset class Furniture and Fixture).
Now when I run transaction KSB1 - Display Actual Cost Line Items for Cost Centers, all my accumulated depreciation accounts are shown except for the ones for these asset classes:
- Buildings
- PC & Small Applications
Any thoughts on why the above aren't showing?
Thanks! I really appreciate your help!
- Deki

SKB1 is displaying unrelated/extra line items.

Hi,
I am encountering one problem which is related to KSB1 transaction. It's displaying extra line items which are not related to actual line items . Here is the scenario
Actual Assessment Cycle contains one segment :
Segment1 : Sender Cost Center group CG(C1,C2,C3,C4)1---All these cost centers are associated with functional area FA
Cost element : 942XXXX
Receiver Cost Center C5,C6,C7,C8----All these cost centers are associated with functional area FA.
Amount $10
After executing the assessment cycle when go to KSB1 it's displaying the following line items
Doc No      Celement         Val in currency        Cost center     partner cost center    Ref Doc No    f unctional area     Posting date
76942           942XXXX            $10                              C1                         C5                       76939        FA                       09/22/09
76939           942XXXX           -$10                             C1                         C5                                         FA                       09/22/09
76939           942XXXX            $0                               C1                          C5                                         FA1                     09/22/09
76942           942XXXX            $0                               C1                          C5                        76939        FA1                    09/22/09
I don't know why it's showing the line items which are realted to FA1 and these cost centers ARE assigned to functional area FA not to FA1.Does any one know from where it's pulling this information?Does any one know how it derives the functional area here. I don't know which table has this information(COEP,COEA,CCSS...?) How to fix this?
I really appreciate your thoughts and input
Thanks
Br

Hi Shekhar,
What is happening in the system is standard SAP behaviour.. In case you do not want Down Payments to be updated in the system, please follow the steps below:-
1. Create a new Field status group as a copy of G067 and make it say Z067(Assets field suppressed here) and assign it to Vendor related recon accounts(Spl GL A)
2. After this, when you create a down payment request in F-47, you will receive an error message F5 378
3. Go to transaction OBA5, enter work area as F5 and chnage the message no 378 to Warning (W)
This setting will not generate additional line items.
Regards,
Kavita

Not displaying Actual cost Line Items for Order

Hi Gurus,
Recently we did patching from SPC6 to SPC8. After patching we noticed that could not able to see displaying Actual cost Line Items for Order from work order.
System is not throughing error message when I double cline on line item at Plan/Actual Comparison screen in work order cost tab.
We can able to see the same from KB01 with out any problem. I have attached the details.
Could any one suggest me please. Appreciate your thoughts
Regards,
Srini

Hi Paul,
I have implemented this note and get it sorted out.
Thank you for support.
Regards,
Srini

T.code required for Vendor line item display and Customer line item display

Hi Gurus,
Pl provide me transaction code for "Vendor line item display and " Customer line item display apart from FBL1n for vendor and FBL5n for customers.
Kindly advise.
Regards,
Samar

Hi,
You could use these, for example:
S_ALR_87012103 - List of Vendor Line Items
S_ALR_87012197 - List of Customer Line Items
Just curious: what's wrong with FBL1(5)N?
Regards,
Eli

ALV Report for multiple headers with Line Items

Hi Sap All.
here i have got a requirement to change the exisiting Zprogram which writes all the header information with line items in a normal simple report,now i have got to change the program in order to display in an ALV Format .
in the exisiting program they are using EXTRACT ,INSERT Statement and multiple select statements for getting the values into each field ofheader and line items for writing in a simple report.
so ijust want to know how i can populate all the data into alv grid.
can any one help me in this.
regards.
Varma

you have to store all header records in an internal table and all item records in a second table
then you call function module REUSE_ALV_HIERSEQ_LIST_DISPLAY with both parameters T_OUTTAB_HEADER and T_OUTTAB_ITEM

Work Order to cost center settlement with line item detail

Iu2019m having difficulty finding a method to settle from a work order to a cost center with line item detail. When an order is settled with KO88 or KO8G the total value for that work order/cost element combination is combined and posted to the cost center as a lump sum with the description of CTR\######. Users would like to see the individual values that posted to the work order in a cost center report such as KSB1.
I donu2019t see anything in the settlement rule, settlement profile or allocation structure that will allow line item settlement from work order to cost center. Is line item settlement possible when settling to a cost center? Is there an alternate way to see these expenses as line items in KSB1?
Thanks,
Jeff

Thanks Christian,
We've defined an allocation structure that we use for Project System and Work Order settlement and have Receiver Categories established as FXA, CTR and WBS with "by Cost Element" checked. Work order costs do settle to the cost center entered in the settlement rule, the problem is it combines all items values as a single amount when posting to the cost center.
For example:
expenses post to the work order under cost element 500000 for $500, $200, $300 and cost element 600000 for $250 and $250. The settlement rule says to settle to cost center 170000. When the settlement takes place cost center 170000 is debited $1000 to cost element 500000 and $500 to cost element 600000. We would prefer to see individual posting of $500, $200, $300 to 500000 and $250, $250 to 600000.
Thanks,
Jeff

One pr for multiple materials with line items while running mrp

Hi SAP gurus,
              I am config the system for MRP as per my client requerement.
                 We use CBP for different RAW materialsfor example they having a 10 materials for planning,were,
         MRP type is VB,
          LOT size is FX,with Different Reorder points and fix order quantity for all materials,
         My client whant run MRP for all these materials in single time that means they whant multiple item at single levels,
        i soles these requirement with the help of Product Group(sop) and its working but when we running md02 for product group all materials have planed and they give different purchase requistion numbers for all these materials but my client Wants single purchase requistion with line items for all these materials.
     Pls give me the solution for that requirement.
thanks and Regards,
abhi

this is not the way SAPs MRP run works.
Where is the benefit for this?
the requisitions are not even split into header and item table, it is just one table EBAN, and either way you would get exact the same number of records in EBAN.

Taking too much time for saving PO with line item more than 600

HI
We are trying to save PO with line items more than 600, but it is taking too much time to save. It is taking more than 1 hour to save the PO.
Kindly let me know is there any restriction for no. of line items in the PO. Pls guide
regards
Sanjay

Hi,
I suggest you to do a trace (tcode ST05) to identify the bottleneck.
You can know some reasons in Note 205005 - Performance composite note: Purchase order.
I hope this helps you
Regards
Eduardo

Text element with line item content and include text

Hi All,
How to write in smartform in single text element with line item content and include text.I am using this text element in table . Pls help me out. i am writing the include command in text element ,but this command is not enough for single line of text editor.
thanks ,
Rakesh singh

I have been pulling my hair out for a few days trying to find
this solution. This fixed my problems as well.
I was getting ready to scrap the Report Builder altogether
and move to SQL Server Reporting Services over this issue.
I'm running 7.0.2 also, that version alone fixed many small
issues like creating borders and such.
Thanks

Resizing or moving an opacity mask along with the items inside it

I'm trying to resize a opacity mask by doing
transMaskItem.resize(
10, //scaleX,
10, //scaleY,
true, //[,changePositions]
true, //[,changeFillPatterns]
true, //[,changeFillGradients]
true, //[,changeStrokePattern]
0.1, //[,changeLineWidths]
This resizes the item, but it does not resize the item inside it. I tried similar command with the translation command
transMaskItem.translate(
100, //([deltaX]
100. //[,deltaY]
True, //[,transformObjects]
True, //[,transformFillPatterns]
True, //[,transformFillGradients]
True, //[,transformStrokePatterns])
and similar thing happened. The item gets moved, but the object inside it doesn't.
How do I resize or translate an opacity mask along with the items inside it?

I see...it seems to be a bug, the actual mask gets ignored. Probably to be consistent with the user interface, you can not select the mask with the mouse either.
maybe someone else has found a way to work with Opacity Masks, I haven't.
as a side note, there's no need to select the objects in order to size them or move them, you can just reference them. Also, there's no "Selected" object, change that to "selection".

Opening Balance to be displayed along with line items

Similar Messages

Maybe you are looking for