Opening Criteria for a Step in BPF

Hello,
Can anyone explain the difference between opening criteria 'All Step Regions' and 'Matched Step Region' in a BPF Step, with an example.
Rgds,
Deepti

Hi,
Is your question resolved?

Similar Messages

  • Messages open several tabs in Thunderbird, one for each step in the mail exchange

    A friend has a new PC with Windows 8.
    If a message is a reply, when opening the message each step in the mail exchange will open in a different tab in Thunderbird.

    Well, the question is that when I open a message in the Inbox, either by double clicking or by pressing Enter, if the message is a reply, i.e if there are more than one message "behind" the message I click to open, every step in the message history is open in a separat tab. Please see attachment

  • The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.

    Hi Guys,
    I am creating the library using object model with custom content type.  When i am opening document from custom content type, the meta data fields are not displaying in the document and throwing below error.
    The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.
    Document Information Panel cannot open a new form.
    The form contains schema validation errors.
    Content for element '{http://schemas.microsoft.com/office/2006/metadata/propertiesRoot}properties' is incomplete according to the DTD/Schema.
    Expecting: {http://schemas.microsoft.com/office/2006/metadata/properties}properties.
    But after saving the document, then meta data is enabled.
    Thanks in advance for suggested solutions.
    thanks
    Santhosh G

    Hi,
    For a better troubleshooting, I suggest to do as follows:
    1. Please try to update the Location column's schema by following the steps below.
     1) Go to Site Settings -> "Site Columns"
     2) Click on "Location", after the page is opened. Don't modify any settings, click "OK"  to forcibly update the field's schema.
    2. Re-edit the document information panel template to see if the issue still occurs.
    Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
    3. Here are some similar links about your issue, please take some time to look at them:
    http://social.msdn.microsoft.com/Forums/en-US/sharepointcustomizationlegacy/thread/243b4852-3f17-4a3a-b6d7-187d65a5f088/
    http://blogs.msdn.com/b/raresm/archive/2010/03/30/document-information-panel-cannot-open-the-form.aspx
    https://joranmarkx.wordpress.com/2012/02/10/sharepoint-document-information-panel-cannot-create-a-new-blank-form/
    If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
    Apply-Fix -siteUrl "http://your site URL "
    function Apply-Fix($siteUrl)
    clear
    Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
    [Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
    foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
    Write-Host "Checking Web: " $spwTarget.Url
    $list = $spwTarget.Lists["your library name"]
    $fields = $list.fields
    foreach($field in $fields)
    if($field.SourceId -eq '{$ListId:your library name;}')
    $schemaxml = $field.SchemaXML
    $schemaxmldata = [xml]$schemaxml
    $schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
    $schemaxml = $schemaxmldata.get_InnerXml()
    $field.SchemaXML = $schemaxml
    $field.Update()
    Write-Host "Fixed" $field.Title "field in the library"
    Write-Host "Done."
    More information:
    SharePoint 2010: Creating a Custom Content Type using Visual Studio
    http://www.codeproject.com/Articles/410880/SharePoint-Creating-a-Custom-Content-Type-usi
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected].
    Dennis Guo
    TechNet Community Support

  • Set Default Tab For A Step

    We have a system that has been installed at a couple of affiliate sites in Japan and Romania (we've been developing in Australia).  It runs on TestStand 4.2 with supporting code written in LabVIEW 8.6 (although the Romanian site uses TS4.2.1 and LV2010).  We have numerous custom steps in a types palette file.
    One of the sites has complained that when they add some specific steps (custom Numeric Limit Tests, in particular) to a sequence, the tab shown in the Step Settings pane is the "Limits" tab.  It would be more convenient and more useful to show the Edit tab (the one that shows the buttons for the Edit sub-steps).
    I realise it's just a matter of clicking on the relevant tab.  I also realise that once a file is saved, the last-selected tab is shown for each step when it's re-opened.  However, the customer is always right, so I need to see if it can be "fixed".
    Is there a way of setting the default tab for a custom Numeric Limit Test step to something other than the "Limits" tab?
    Help files, Google and the NI pages don't seem to be forthcoming on this issue.
    Thanks,
    Geoff
    Geoff Field, BE, CLAD, MIEAust
    Professional geek, amateur stage-levelling gauge
    Solved!
    Go to Solution.

    Thanks Rohama,
    I will mark the issue as "not fixable" and be done with it.
    Regards,
    Geoff
    Geoff Field, BE, CLAD, MIEAust
    Professional geek, amateur stage-levelling gauge

  • Automatically clear the open items for a GL account cross company codes

    Hi FICO experts,
    Can anyone help me on the following issue urgently?
    There are journal entries posted to same GL account with different company code. Is there any way to automatically clear the open items sitting in the GL account in company code A to against the open items for the same GL account in company code B.
    The example is below:
    Journal in company code A
    Dr. 840410      $100
      Cr. 111300       $100
    Journal in company code B
    Dr. 111301   $100
      Cr. 840410      $100
    Now I want to automatically clear account  840410 by using assignment or text in the journal entry.
    It will be highly appreciated for any instructions.
    Adele

    Hello Adele Wang,
    You can enter cross-company code transactions in one step in the General Ledger, Accounts Receivable, and Accounts Payable application components. This function would be used, for example, for centralized procurement or payment.
    Integration:For centralized payments, each individual company code enters its own invoices separately, while a central company code pays them. When you are clearing open items, the system makes clearing entries between the company codes participating in the clearing procedure. These clearing entries represent the receivables and payables that exist between the company codes in centralized payment.
    Prerequisites:You have specified which company codes are to be processed via a single company code. In this specification, you can distinguish between clearing transactions. You can therefore have different combinations of company codes for incoming and outgoing payments.
    You have specified the clearing accounts that record the receivables and payables between the individual company codes. The system posts to these accounts automatically when clearing the open items.
    You need to make  the required settings in the activity Prepare Cross-Company Code Manual Payments in Customizing for Financial Accounting (Accounts Receivable and Accounts Payable->Business Transactions->Outgoing Payments->Manual Outgoing Payments).
    Features:For each company code, the system generates a separate clearing document. A joint transaction number marks these documents as belonging together.
    Example:For a clearing transaction (incoming payment, outgoing payment), you have agreed in Customizing that if company code 0001 is specified, open items are also selected from other company codes (0002 and 0003).
    Hope I had been able to help you. Please assign points.
    Rgds
    manish
    Clearing can then also be carried out if the account to be cleared has not been created in company code 0001. As long as no items have to be posted to this account in company code 0001, it is not necessary to create a master record for the account in company code 0001.
    See also:

  • Guid not set for a step

    Hi,
    I am facing a probleme where in a step of workflow is not getting executed properly. If i check the container for that step, the import parameter for it 'Guid' shows as '<not set>'. I am new to workflows, so I may not be aware of the basics or details and might have missed out.  Please guide what could be the possible reasons for it.
    Thanks and Regards,
    Radhika

    My WF's previous step is getting executed properly which is also using the
    Object id. Gor guid,
    i am using Structure:SYSUUID Field: C.
    As you stated that the previous step is also using the same guid, so just open the workflow in change mode and copy the binding entry from the previous step and paste it in the step where  the guid is not getting set, make sure the target container has the same element name as it is in the previous step target container.

  • ORA-00313: open failed for members of log group 1 of thread 1

    Hi
    I'm restoring a database on a different host. I have the backups, from which I want to restore the database. I made the corresponding changes in the initSID.ora file and started the script to do the restore.These are the steps I followed:
    connect target=/
    run{
    startup nomount;
    allocate channel c1 type disk;
    allocate channel c2 type disk;
    allocate channel c3 type disk;
    allocate channel c4 type disk;
    restore controlfile from '/tmp_backups/rman/lev0_open_cf_SID_2826_1';
    alter database mount;
    set newname for all datafiles
    restore database;
    set until logseq = 29317 thread = 1;
    switch datafile all;
    recover database;
    alter database open resetlogs;
    One mistake I made here is that logseq should have been last seq+1, which I did not do. I have it as last seq.
    Restore of datafiles and switching of datafiles was fine. But I get error for redo log files.
    ORA-00313: open failed for members of log group 1 of thread 1
    ORA-00312: online log 1 thread 1: '/u13/oradata/SID/redo02a.log'
    ORA-27037: unable to obtain file status
    SVR4 Error: 2: No such file or directory
    Additional information: 3
    Why is it looking for at the old path yet?
    I'm not sure what I missed and how to proceed. Please help.
    Thanks,
    Mamata

    I do believe that set newname for all datafiles only means actual datafiles and no redo logs. So with open resetlogs, Oracle tries to create new redo logfiles where the backup controlfiles says they are.
    As with creating a auxilliary database in another filesystem, we use DB_NAME_FILE_CONVERT and LOG_FILE_NAME_CONVERT.
    I am not sure if it is possible to type "set newname for all datafiles" and expect also the redo logfiles to change location.
    You might try to set these two parameters and see if it works.
    good luck.
    rgds
    Kjell Ove

  • Archiving: adding more selection criterias for MM_EKKO

    Is there a possibility for adding new selection criterias for object MM_EKKO? Any exits for Release 4.6c?

    Deactivated means that you have executed a 2-step archiving.
    You have different residence times. SAP set the deletion flag if residence time one is met, but residence time 2 not yet.
    If both times are met, the PO gets archived.
    for examples see OSS note 948493 - Residence time in new reports RM06EV47, RM06BV47
    You probably have customized the test variant for MM_EKKO as production variant, other wise SAP would not have updated your database.

  • Reload automation server doesn't work for all steps

    Hi all,
    I'm creating ActiveX Servers using Visual Basic 6. In TestStand 3.1 I have steps that call methods from an automation server and I have steps that get properties of an automation server.
    When I create a new version of an automation server, I open one of the steps that use the automation server and press "Reload", so that is uses the latest version. TestStand Automatically updates all the rest of the steps that use the same automation server, but for some reason it only updates the steps that call a method and not the steps that Get a property. Why is this?

    Frank -
    When you configure a TestStand step to call an automation server, it stores the specific ID information for the server and the class and method/property that you are calling. If the server is created with MSVB the compatibility mode of the project defines whether MSVB alters this information after each recompile of the project. TestStand tries to find the server, class and method/property after you compile the project each time. If you take a look at the Compatibility Options for Visual Basic section in Chapter 5 of the TestStand 3.x Reference Manual you will find more information on this. The section describes the various compatibility modes Visual Basic projects. In a nut shell, it is recommended to use Project Compatibility while developing code and switch to Binary Compatibility when you release a system. When you switch to Binary Compatibility you should keep it there and only add new methods or classes. You should not change the names or prototypes of existing methods or properties for this breaks binary compatibility. In my previous development, it would have been nice if VB exposed the control of these IDs, but they do not.
    Scott Richardson
    National Instruments

  • CK40N - "still open" material in "release" step

    Hello everyone,
    We have just released our 2008 standard cost. We use CK40N to do the whole thing, including the marking and releasing of the costs.
    Under the "release" step, the status is green, there are no errors, but there are materials "still open" indicated. I can't figure out how to get the list of these "still open" materials.
    Under previous steps (from selection all the way through marking, there are no open materials).
    My question:
    1. What's the easiest way to find out if there are indeed "still open" materials?
    2. If there are, how do I fix them? Especially since everything seems to be processed all the way to marking.
    3. If there really is no open material, then what does this number mean?
    Any suggestion or help is really appreciated, since this really confuse us.
    Thank you,
    Suri

    It seems that occasionally there are some issues (tho i still cant find what they might be) which prevent SAP from Marking or releasing a standard cost for a material.  Resulting in the material appearing in the "Still open" statistics on the cost run.
    In order to resolve this, try the following;
    Firstly, try just re-executing that stage of the cost run by hitting the execute button for that step.
    If this does not work then try the following;
    Whilst still in the “Edit cost run screen”, in the transaction box, enter the transaction “=CKSU” and hit enter.  SAP will run for a few seconds and re-calculate the statistics so that the “Still open” Quantity is added to the “Errors” column. 
    Then re-execute that step of the cost run by hitting the execute button. 
    SAP should re-process those entries which were not marked / released previously.
    Hope this helps!
    Phil

  • Getting error 'opening port for MGR  (Connection refused).

    Hi Guys,
    I m getting below, while starting replicat on target.
    GGSCI (ggtarget) 16> start replicat RLOAD
    Sending START request to MANAGER ...
    ERROR: opening port for MGR MGR (Connection refused).
    GGSCI (ggtarget) 20> view param mgr
    PORT 7809
    USERID orgg, PASSWORD orgg
    PURGEOLDEXTRACTS /ggs/dirdat/*, USECHECKPOINTS
    GGSCI (ggtarget) 21> view param rload
    REPLICAT RLOAD
    USERID orgg, PASSWORD orgg
    ASSUMETARGETDEFS
    HANDLECOLLISIONS
    APPLYNOOPUPDATES
    GETUPDATEBEFORES
    reperror default, discard
    DISCARDFILE ./dirrpt/rload.dsc, purge
    MAP HR.TCUSTORD, TARGET HR.TCUSTORD;
    MAP HR.TCUSTMER, TARGET HR.TCUSTMER;
    from Source I could able to do the telnet to target...
    What could be issue ???

    Hi,
    Error:
    GGSCI (ggtarget) 16> start replicat RLOAD
    Sending START request to MANAGER ...
    ERROR: opening port for MGR MGR (Connection refused).
    You can start Manager, but when you try to start Replicat, GGSCI gives me a connection timeout error
    Solution:
    GoldenGate uses a TCP/IP socket to communicate between local processes. When you issue a START, STOP, SEND, or other command in GGSCI, the command interface will try to open a local port for the process.
    Here is how to find out which local ports these processes are listening on. In the dirpcs directory, there will be one file for each running GoldenGate process.
    For Manager, the file name will be MGR.pcm.
    For Extract, it will be <GROUP_NAME>.pce.
    For Replicat, it will be <GROUP_NAME>.pcr.
    These are text files that can be viewed by using cat or any equivalent command. For example, the MGR.cpm file content will read like this:
    PROGRAM MGR PROCESSID MGR PORT sys1.4356 PID 60070
    After the keyword PORT will be the local hostname and the port number that Manager is supposed to be running on. In the preceding example, the hostname is sys1, and the port is 4356.
    The program (ggsci) tries to use that hostname to communicate to the process (Extract/Replicat/Manager) when the command is issued in GGSCI. If you get a timeout or connection-refused error on the command, that means GoldenGate could not connect to the local host. Most of the time, you should have no problem connecting to a local host, but when you have the wrong IP address or routine table configured in your TCP/IP settings, connection errors can happen.
    To troubleshoot this, follow the steps below
    1. Try to ping that host name from the OS shell to see if it goes to the correct IP address (which should be the one for the local system).
    2. If the ping is successful, try to telnet to the Manager port on your local host. You will be able to see your telnet session connect if a Manager is listening on that port.
    Here is an example:
    shell>telnet
    telnet> open sys1 4356
    Trying 100.100.100.100...
    Connected to sys1.oracle.com (100.100.100.100).
    Escape character is '^]'.
    3. If your telnet session times out or gets a connection-refused error, that means either the hostname is wrong or the port number is wrong.
    If the ping to the hostname listed in the pcm/pce/pcr file fails, or if you cannot connect your telnet session to the port listed in the file(s), contact your network engineers to get the TCP/IP issue resolved.
    Hope this information helps.
    Thanks & Regards
    Santhosh

  • HOW TO CARRY FORWARD RG1 CLOSING BALANCE TO OPENING BALANCE FOR NEW FISCAL

    Hi Experts
    How to carry forward the RG1 closing stock at the year end to opening balance of Rg1 for new year.
    Wt are the steps required for closing activity of RG1 and carry forward closing balance of last year to opening balance of  new year.
    Thanks

    Hi Rohan,
    For RG1 and RG23 A Part I and RG23 C Part I
    Go to SE16, here enter Table Name - J_2IRG1BAL and Click on "Create" button in initial screen, it will give the maintenance screen. Here mainatin following;
    For each of these materials, you have maintained the material form in table J_2IRG1BAL as below. Do not make any entries in fields that are not listed below:
    EXGRP - Materialu2019s excise group
    DATUM - Date from which RG1 report is required, normally the date of going live
    MATNR - Material
    FORM - Enter P (Packed) or L (Loose). Do not leave this field blank.
    WERKS - Leave this field blank.
    OP FN UOM, OP BN UOM, CB FN UOM - Leave these fields blank. All quantities in this table are updated in the base unit of measure of the material
    USNAM - User ID of the person filling out the table.
    CPUDT - Date of entry
    CPUTM - Time of entry
    Note: - This is to be done before J1I5, J2I5.
    Also refer link;
    Update of Registers RG 1 and RG 23 (Part I)
    For RG23 A Part II, RG23 C Part II and PLA
    Go to SE16, here enter Table Name - J_2IACCBAL and Click on "Create" button in initial screen, it will give the maintenance screen. And maintain following;
    Excise Group
    Data element for Register names
    Date
    Plant
    Basic duty (OP BAL)
    Basic duty (CL BAL)
    Basic duty (EXAMT)
    Extract Indicator
    User name
    Entry Date
    Entered at
    Note: -
    1. Enter OP BAL, CL BAL and EXAMT all as same as opening balance. For e.g. opening balance for RG23ABED is 1400 then this value is to be entered in all the 3 fields.
    2. You have to enter separate line items for all the accounts;
    RG23ABED
    RG23ASED
    RG23AAED
    RG23CBED
    RG23CSED
    RG23CAED
    PLABED
    PLASED
    PLAAED
    PLACESS
    RG23AECS
    RG23CECS
    PLAECS
    RG23AAT1
    RG23CAT1
    PLAAT1
    3. Enter Date is one day before of the opening. For e.g. if opening date is 01.04.2008 then enter it in 31.03.2008
    Then go for J2I5 - Extract and J2I6 - Print Utility
    use following
    http://help.sap.com/bp_bblibrary/470/Documentation/J33_BPP_32_CHEM_EN_IN.doc
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/18/8e113999724854e10000000a11405a/content.htm
    Reefer this link for complete Excise transactions
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
    Re: Excise -initial upload
    Hopefully this will helpfull to resolve your answer.
    Thanks & regards,
    Pankaj Mahajan

  • Selection criteria for infopackage using 7.0 datasource

    Is it possible to have selection criteria on  7.0 flat file DataSource ?
    I have selected fields as Key Fields, Set the X in select DataSource  and chosen options of selections permitted, but still my InfoPackage  do not contain criteria for my key fields.  
    If this is possible, please let me know what steps are required?
    Thanks,
    Curt Timmerman

    Hello Curt
    this must be possible. Go to RSA1 and change your flatfile DataSource. On the tab "Fields" you can insert an "X" in the colum "selection". In addition to that, you can also add selection options. After these steps, the selection field should be visible in the infopackage.
    Best regards
    Martin

  • Open failed for members of log group

    HI,
    OS : LINUX 5.1
    DB : 10.2.0.3
    i have configured physical standby and its working fine. but in alert log i m getting below error.
    i have checked the physical location of member. it is very much available.
    Mon May 24 23:54:19 2010
    Errors in file /u001/app/oracle/admin/YAHOO/bdump/yahoo_mrp0_3526.trc:
    ORA-00313: open failed for members of log group 1 of thread 1
    ORA-00312: online log 1 thread 1: '/u001/app/oracle/oradata/YAHOO/redo01.log'
    ORA-27037: unable to obtain file status
    Linux Error: 2: No such file or directory
    Additional information: 3
    Mon May 24 23:54:19 2010
    Errors in file /u001/app/oracle/admin/YAHOO/bdump/yahoo_mrp0_3526.trc:
    ORA-00313: open failed for members of log group 1 of thread 1
    ORA-00312: online log 1 thread 1: '/u001/app/oracle/oradata/YAHOO/redo01.log'
    ORA-27037: unable to obtain file status
    Linux Error: 2: No such file or directory
    Additional information: 3
    Clearing online redo logfile 1 /u001/app/oracle/oradata/YAHOO/redo01.log
    Clearing online log 1 of thread 1 sequence number 31
    Mon May 24 23:54:19 2010
    Errors in file /u001/app/oracle/admin/YAHOO/bdump/yahoo_mrp0_3526.trc:
    ORA-00313: open failed for members of log group 1 of thread 1
    ORA-00312: online log 1 thread 1: '/u001/app/oracle/oradata/YAHOO/redo01.log'
    ORA-27037: unable to obtain file status
    Linux Error: 2: No such file or directory
    Additional information: 3
    Mon May 24 23:54:19 2010
    Errors in file /u001/app/oracle/admin/YAHOO/bdump/yahoo_mrp0_3526.trc:
    ORA-19527: physical standby redo log must be renamed
    ORA-00312: online log 1 thread 1: '/u001/app/oracle/oradata/YAHOO/redo01.log'
    can any one suggest?
    Regards,
    BK

    Hi,
    Below note was taken from metalink;
    Symptoms
    Following errors in alert.log of standby database during startup of the standby database:
    ORA-00313: open failed for members of log group 1 of thread 1
    ORA-00312: online log 1 thread 1: '/u03/oradata/prod/redo01b.log'
    ORA-27037: unable to obtain file status
    Cause
    Online Redo logs missing on standby database.
    Solution
    You can safely ignore these messages. Online redo logs will be created automatically when you activate the standby after switchover or failover.
    If you want to fix these messages then please use following steps:
    1. Check and set "log_file_name_convert" parameter if the location of log files are different on primary and standby.
    SQL> alter system set log_file_name_convert = "'<location on primary>','<location on standby>'" scope=spfile;
    If you are using pfile then set the parameter in init file after shutting down the database:
    *.log_file_name_convert = '<location on primary>','<location on standby>'
    For 10gR2 only : Set this parameter even if the location of the redo logs are same on both primary and standby otherwise you may get ORA-19527 and ORA-312 while or after implementing the below steps.
    This is due to internal bug in 10.2.
    2. Cancel Managed Recovery process on the standby:
    SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
    3. Execute the command to clear all log groups on standby for each log group (for each log group):
    SQL>alter database clear logfile group 1;
    4. Check the v$log view to confirm the size and status.
    5. Recreate standby redo logs on standby (only if standby Redo logs are also missing) using:
    (a) Drop the standby redo logfile group(s) (check v$standby_log)
    SQL> alter database drop standby logfile group 4;
    (b) Recreate the standby logfile group(s)
    SQL> alter database add standby logfile group 4 ('/u03/redo/stby01.log') size 50m;
    Hope it helps you.

  • What is the criteria for a "valid eprint email address"

    Criteria for a vaid eprint email address

    Dossr,
    Welcome to the HP Forum!
    The custome eprint address must be connected to an actual ePrint account and printer.
    The address shall be in the form of  [email protected]
    Examples: 
    [email protected]
    [email protected]
    The following explains and tells you how to set up your custom email address for your ePrint:
    Eprint – Help and Tips – Getting Started
    When the page opens:
    Getting Started »
    Getting Started with ePrintCenter >>Select:  What is a custom email and how do I set it up?
    Dragon Tip
    Be sure you also set up a restricted list of users that are allowed to send to your ePrint email address.  If you do not do this, your printer may be e-spammed!
    Eprint – Help and Tips – Getting Started >>  
    HP ePrint >>
    Click on Managing ePrint Security >>  Select How can I restrict who uses ePrint on my printer?
    Good Luck!
    Click the Kudos Star! 
    It is a great “Thank You” for the Author's efforts.
    Kind Regards,
    Dragon-Fur

Maybe you are looking for

  • SAP Gui Logon Error - 0942

    Hi, We done system copy from SAP ECC6 windows to unix environment.It sucessfully installed. while we logon(SAPGUI) the Unix system  Error message Occurs "SQL Error 942 When accessing program SAPM". Kindly advice to us. regards senthil

  • Cannot connect to iCloud server after 10.9.4 update.

    Attaching EtreCheck information.  Connection doctor states: Could not connect to iCloud iMap server.  Restart of mail did not work. Reboot of computer did not work. Thank you for any help you can provide. EtreCheck version: 1.9.12 (48) Report generat

  • Hp laserjet 1018 with windows 7-32 driver problems

    We've used this printer with our new computers for 2 yrs now. The last 4 months, we've had issues with it not printing all of the time, but. Could turn it off and back on and it would work. Now it's not printing at all. I have downloaded driver and u

  • Horizontal charts in BO 5.1.7

    Post Author: Akhil0108 CA Forum: Desktop Intelligence Reporting Hi, Could nyone tell me, how to get horizontal charts in B0 5.1.7 Thanks

  • Offline online

    HP Officejet 4500 wireless - I cannot send a print to my printer because it is offline.  How do I get it online again.  I tried shutting everything down and waiting.  I went to the control panel and tried all I could but now help.  Please respond thi