Opening CS6 files in CC - the fonts swash together

Some fonts look fine on screen, others swash together so it looks like they have -1000 tracking. Can anyone help?

Similar Messages

Cannot open CS6 Bridge. Always the same ERROR: Bridge has a problem and cannot read the cache

Cannot open CS6 Bridge. Always the same ERROR: Bridge has a problem and cannot read the cache

Try this. This is for CS6 but substitue CC and Bridge 6.
~library/caches/Adobe/Bridge CS6 and inhere should be 2 files:
Adobe Bridge Plug-in Cache
and the folder called Cache. Inhere should be 4 folders called '254', '1024', 'data' and 'full'
All those folders carry the content of the respective quality of the thumbs and preview as well as 100 % cache and Bridge database.
Any way, Since you have not used Bridge you have no relevant amount of cache and I would suggest you quit both PS and Bridge and manual delete both the items (plug in and folder called cache at the end of the Bridge CS6 path mentioned above.
(both files will refresh itself after a restart of Bridge).
To be on the save side also visit in same user library the folder Preferences and look for the file called "com.adobe.bridge5.plist" (yes it is Bridge 5 that comes with CS6, all Adobe apps have their own version number and they are presented in the same Suite version. CS6 has PS version 13 and Bridge version 5 )
also drag this file to the trash.
Then hold down option key (alt) while starting Bridge and this should give you the option to reset the preferences as mentioned earlier in this thread.
Choose reset prefs and try again.

I am using CS4. Can I open CS6 files? I am receiving "plug-ins not available on your system" messages and I'd like to open anyway but clicking on OK doesn't work.

I am using CS4. Can I open CS6 files? I am receiving "plug-ins not available on your system" messages and I'd like to open anyway but clicking on OK doesn't work.

InDesign CS4 can open .indd, .indt and .inx files from earlier versions, but not from later. It should, however, be able to open .idml files saved or exported from newer versions, with the understanding that unsupported features will be lost, text will probably reflow due to differences in texts engines between versions, and that the greater the gap between versions the more likely there are to be noticeable differences from the original. You will need to be sure CS4 is at version 7.0.6 to read the .idml.

How to open a file created at the server through form/report at client end

How to open a file created at the server through form/report at client end
Dear Sir/Madame,
I am creating a exception report at the server-end using utl file utility. I want to display this report at the client end. A user doesn't have any access to server. Will u please write me the solution and oblige me.
Thanks
Rajesh Jain

One way of doing this is to write a PL/SQL procedure that uses UTL_FILE to read the file and DBMS_OUTPUT to display the contents to the users.
Cheers, APC

Good afternoon ladies and gentlemen! My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In t

Good afternoon ladies and gentlemen!
My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.

<moved from Adobe Creative Cloud to Bridge General Discussion>

IPhoto will not open iDraw files - why are the files "unrecognized"?

iPhoto will not open iDraw files - why are the files "unrecognized"?

What file format are you saving the files as?
OT

Opening a file without hearing the previous one....

How do we do to open a file without hearing the previous one if we open multiples files in a short time without willing to close the previous one each time ??

How do we do to open a file without hearing the previous one if we open multiples files in a short time without willing to close the previous one each time ??
If you don't wish to listen to all playing videos and it is too much trouble to stop or close non-foremost player windows, then don't use the QT X (or any similar) media player for playback. (I.e., this is what they are programmed to do.) Instead, use a media player like QT 7 which has a user preference that can be set so that only the "foremost" player window audio is heard when multiple videos are being played simultaneously.

Can cc open cs6 files

Hey best readers,
I am new at this forum.
But my question is: can cc open cs6 files?
Because I have to upgrade to cc and I am not sure what kind of problems I will find, while I have upgraded my version.
Thanks!
Greets IIYAMA

Hello Sumit,
Application name?
I don't get what you mean, did I misted something before I posted this?
(I am new here)
And where can I confirm that?
Greets IIYAMA

Mac OS X 1073. I also run 2008 MS Office. I am recently unable to open doc files. Is the fault with Lion or Mackeeper?

I run a Mac OS X 1073. I also run 2008 MS Office. I am recently unable to open doc files. Is the new Lion or Mackeeper stopping me?

Briartor wrote:
Is the new Lion or Mackeeper stopping me?
Not sure, but MacKeeper is trash and could be the source of it, among any other problems you may be having. I suggest you uninstall it immediatley: http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/

Opening a legacy file in CC2014, the fonts in the file (which are loaded and accessible with Suitcase Fusion 6), won't display. I get the [Jensen text] font name indicating a missing font file. YET, when I make a new file, the fonts are available. Any ide

Okay, that was a long title. Sorry about that.
Longer version now. The font Janson Text is an old Type 1 Postscript font. If I make a new document in InDesign CC2014, this font is completely available to me. HOWEVER, if I open a legacy file that uses this same font, it shows up with the usual pink highlighting.
I know the font is available to InDesign, because I made a new test document and set type with it.
If I try using the Type > Find Font.. option to replace the 'missing' typefaces, InDesign won't let me, not recognizing the font that I just used in the new test document.
I just tried exporting the defective file as an IDML file, then opening the IDML file. The font is now working properly.
This is a real problem, as the file I'm trying to open is a book that we need to reprint. I now have to go through it page by page to see if any linebreaks have changed.
WHAT CAUSES THIS, please?

There is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?

Cannot open cs6 files in cc

Hello,
I recently subscribed to CC after completeing a project on the trial version. However since purchasing CC I have been unable to open any of the CS6 files I had downloaded (I could open them whilst on the trial period). Yesterday I just kept receiving the error message " Cannot open the file **** Adobe Indesign may not support the file format, a plug in that supports the file format may be missing or the file may be open in another application" Today I cannot even click to open any of the files, they are in a faded typeset in the documnents or downloads folders. I can open any indesign files I have created from scratch though? So it seems it is just the files originally created in CS6 that are affected. I am working on a macbook, if that makes any difference.
Many Thanks for your help.

Hi Peter,
Thanks for your help. I am working on the 9.2 version Willi.
I am unable to open the downloaded cs6 files on their own, even from the file menu, as the error message appears, but today they are no longer in faded type in the folder, and I am able to click on them and drop into a new indesign file and resave.
So thank you for your help.

Can Illustrator CS4 open Illustrator CS6 files? or other work around way to open CS6 files?

Can Illustrator CS4 open files created in CS6? or can CS6 files be converted to be opened in CS4? like CS6 InDesign can be saved in IDML files to be opened in previous versions. Or if there is any other work around ways, like save CS6 files in PDFs/eps/... so the files can be opened in CS4 and work from there. Thank you.

Open in CS6 , file >> Save As >> Version >> CS4.

Multiple layers flattening when opening cs6 file in cc

I'm working with a designer who is using cs6. When I open his file in cc, 50% of his layers seem to flatten into a single layer in cc. Any idea why this might be happening?

Thanks for the response Mylenium! I've never run into any quite like this before. He saves a PSD file in CS6 and I open the same file in CC and two of his folders that contain the bulk of the layers automatically got flattened into single layers. Just by opening the file. However, I had a separate person running CS6 open the same file and they have the same issue with flattened layers. So it must be the method by which he's saving his file? It just seems like I'm missing something obvious. Not sure what scenarios would cause two large folders to turn into single layers just by opening the file somewhere else.

Unable to open CS3 Files from within the application

Good Afternoon
I work as IT Support for company looking after 10 ADOBE Creative Suite 3 end-users.
One of my colleagues is unable to open Illustrator or Photoshop files from within their respective applications, but she is able to open them from outside ok.
I have reinstalled ADOBE CS3 and this appeared to resolve the issue, only for it to return again a day later.
She has no other applications or processes running during her attempt to open a file from within CS3.
She will click on Open and the 'Open File' window will flash up for a split second, then the whole application will be frozen. It is as if the 'Open File' window is there, but isnt there because we cant click on it, but the application thinks it is displaying and so she can not click on anything else. The only way to close the application is to end the process under Task Manager.
While I am sitting here tearing what little amount of hair I have on my head, can anyone point me in the right direction?
Is this a Windows problem or an ADOBE problem do you think?
I look forward to any replies.
Thank you

Hi Bob
Ok...
Opened illustrator but was unable to open the 'Open File' window.
Changed the screen resolution, it suddenly worked!
Changed the screen resolution back to as it was before, it also worked.
What could cause this do you think?
By simply changing the screen resolution and back again, the 'Open File' window displayed itself.
Very bizarre!

How to open a file and display the complete file path?

In my script, I want to create a dialog that prompts the user to define a few variables for the script. One of those variables is the path to a template file. I want it to work the same way that an upload form works. You click the browse button, the dialog appears so that you can browse for the file and then when you click OK or Open, the full path of the file is displayed in the text box next to it. How do I do this with JavaScript? I got this far and it seems to be working, but the wrong text is being displayed in the text box. Plus: How do I properly restrict the file types to PSD. The code doesn't seem to work, despite the fact that there are no errors reported. Initially the Text box is blank, but After I browse for the file, the text box says: "File". Here is the problem area:
defineVars.STPnl.STBrowse.onClick = function browseST() {
var stbFile = File.openDialog("Select the Single Mugshot Key Template File", "File Types: *.psd, *.PSD");
defineVars.STPnl.STPath.text = stbFile;
Thank you to whoever assists me! :)

Change this:
defineVars.STPnl.STPath.text = stbFile;
To this:
defineVars.STPnl.STPath.text = stbFile.fullName;
The reason is that stbFile is a File object, you need to access its properties in order to get the full path.

Opening CS6 files in CC - the fonts swash together

Similar Messages

Maybe you are looking for