Opening data form in OBIe

Hi everyone,
There is need to open data form from Hyperon Planing in OBIe. Is't possible to open data form directly in OBIe or using URL? Is't possible generally to open data form using URL?
Regards,
Sergey

Try Oracle Support : Hyperion Planning Data Form Design Considerations (Doc ID 779502.1)
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • Error when opening Data Form

    Hi All,
    Also I have tried by removing access for that user and opened the Dta Form but still it throwing me the same error:
    You are trying to open the data form, but cannot because all of the required dimensions are not present. Possible causes may be that you do not have access to at least one member of a required dimension, or the member selection resulted in no members present. Contact your administrator
    Kindly guide me.
    Thanks and Regards
    ChiDam

    duplicate post - Error while opening Data form
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Slow performance on opening data form in workspace

    hi,
    when we try to open a data form in workspace its taking more time to open.
    how increase the performance of it . its 11.1.2.2version,windows 2003 and 64-bit
    thanks in advance.

    Try Oracle Support : Hyperion Planning Data Form Design Considerations (Doc ID 779502.1)
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error when trying to open Data form in HFM

    Hi,
    I tried to change period in POV-selections from April to May but did not succeed. And after that when I try to open this Data form
    I get this error message:
    Error executing VBScript Hyperion.HFMErrorHandler.1, Line 129:<?xml version="1.0"?> <EStr><Ref>{3086414B-A5B2-4627-8FCA-7FDA700BEE3D}</Ref><AppName>LUVATA</AppName><User/><DBUpdate>1</DBUpdate><ESec><Num>-2147211264</Num><Type>1</Type><DTime>5/10/2010 9:30:31 AM</DTime><Svr>HFMAS003</Svr><File>CHsvDSMemberListScript.cpp</File><Line>1175</Line><Ver>11.1.1.3.22.2724</Ver></ESec></EStr>.
    Invalid POV member specified: %0
    Show Details:
    Error Reference Number: {699C5226-DB4A-4B30-BABF-581EF156ADDD};User Name: admin@Native Directory
    Num: 0x80042fc2;Type: 1;DTime: 5/10/2010 9:30:31 AM;Svr: HFMAS003;File: CHsvScriptEngine.cpp;Line: 392;Ver: 11.1.1.3.0.2413;
    Num: 0x80042fc2;Type: 0;DTime: 5/10/2010 9:30:31 AM;Svr: HFMAS003;File: CHsvDSMemberLists.cpp;Line: 2592;Ver: 11.1.1.3.0.2413;
    Num: 0x80042fc2;Type: 0;DTime: 5/10/2010 9:30:31 AM;Svr: HFMAS003;File: CommonMetadataInternal.cpp;Line: 473;Ver: 11.1.1.3.0.2413;
    Num: 0x80042fc2;Type: 0;DTime: 5/10/2010 9:30:31 AM;Svr: HFMAS003;File: CommonMetadata.cpp;Line: 2973;Ver: 11.1.1.3.0.2413;
    Num: 0x80040d53;Type: 1;DTime: 5/10/2010 9:30:31 AM;Svr: HFMAS003;File: CHsvWebFormGeneratorACM.cpp;Line: 2627;Ver: 11.1.1.3.15.2720;
    Num: 0x80040d53;Type: 0;DTime: 5/10/2010 9:30:31 AM;Svr: HFMAS003;File: CHsvWebFormGeneratorACM.cpp;Line: 2433;Ver: 11.1.1.3.15.2720;
    Num: 0x80040d53;Type: 0;DTime: 5/10/2010 9:30:31 AM;Svr: HFMWS002;File: CHsvWebFormsACV.cpp;Line: 569;Ver: 11.1.1.3.0.2413;
    Any ideas what might be wrong?
    All I tried to do is just to edit period in POV-selections -tab.

    I figured a way around this in case anyone has the same problem in the future. I just opened Acrobat Pro X, clicked combine files into PDF, selected the file I wanted, saved the "binder" as PDF then saved another version as Reader Extended PDF. I think this helped because it essentially creaded a whole new PDF with the old PDF in it and getting rid of whater hashes or document properties in the last one that wouldn't allow it to work in Reader. Opens perfectly on other computers.

  • Error while opening data form

    When I am trying to open forms I am getting the following error.
    "Planning is Unable to obtain a connection to Hyperion Essbase. If this problem persists, please contact your administrator"
    My case is a bit different from the other threads on the similar topic in the forum.
    I am able to login using ESSCMD.
    Can anyone suggest what should I do next?

    Thank you for your reply.
    I installed Essbase and Planning recently. I am using version System9.
    I created only one application.
    I checked Datasource connections, the Essbase username and password are correct.

  • Hyperion planning data form in smartview: problem with summary time period

    We are using Planning ver. 11.1.2.2.300.20 and smartview 11.1.2.2.300 (build 070)
    We use common Data Form:
    In columns: Periods (Descendants including YearTotal - with no checkbox on start expanded)
    In Rows :accounts
    In some of our users computers,
    When they open Data Form in Excel (with Smart View) - its appears very strange:
    Summary Accounts are displayed as level 0 account in the summary Period columns (i.e. not in grey) and permit entering data.
    In addition when Entering data in summary time period (i.e. Year or Quarter),
    strangely,  the data doesn't  spread to the descendants months (level 0) .
    This phenomenon occurs just in few of the computers.
    Please help, how can we overcome this problem?
    Thanks and Regards
    Tami Kedem

    Hi Celvin,
    Thanks for your rapid response!
    All computers have the same version of planning and smartview.
    The computers where the Periods spreading and aggregation properties in Data form are not working,
    do work wonderfully when opening the Data forms in the web.
    I've tried everything, (remove suppressing, validations etc.):
    In all kind of data forms the spreading and aggregation properties on summary time periods are not working in smartview -
    and summary accounts on rows are not displayed in grey and permit entering data.
    We remove and reinstall MS-Office (2007) from the problematic computers, but it didn't help.
    Do you know if there is any kind of settings or softwares that might cause this phenomenon
    i.e. interrupts the smartview translation of the web Data Forms.
    Thank and best regards,
    Tami Kedem

  • Data forms new requirement, Members need to hide for diff combination

    Hi All,
    I have a new requirement
    I have created asymmetric forms and created a extra member in period dimension as per required.(Extra member name is ABC)
    In layout page view i have given scenario dimension with members called budget,Actual,Forecast.
    now when open data form combination to budget scenario Extra member has to appear,
    if you select Forecast Extra members should not appear in the form.
    am in mess how to achieve this requirement can any one help me out in acheiving this requirement.
    Thanks in advance
    Regards
    Sm

    Hi,
    Assuming you have accounts on the rows and periods on the columns, try this solution:
    Create two account members called RowSuppresser (store) and RowSuppresserDyn (dynamic). Retrieve RowSuppresser in Excel combined with ABC (period) and Budget (scenario) along with one default member from all other dimension (i.e. no entity, no year etc). input a flag amount (0 or 1) and lock and send to Essbase. Member formula in RowSuppresserDyn should point to this particular input (i.e. RowSuppresser->"No Year"->"No Entity" etc.
    Add a row on top of all other rows in your form and select (RowSuppresserDyn) account member. You can even hide this row if you wish. In the column where you added ABC period, enable suppress missing data. So when Budget is selected, this column appears, otherwise is gone.
    Cheers,
    Alp

  • Data Forms takes a lot of time to open

    Hi,
    My Data Forms are having around 24 columns and some 150 rows, with multiple currencies. I have gone through the document 779502.1 for data form design considerations. But I cant split this form, have dense dimensions in rows and columns and rest in page and POV, not many dynamic members, have static dimensions in POV and hidden, no business rule running on save, and not much data in it as its still in development so not using suppress #missing. What are other ways to have data forms open faster? its not the IE , I tried opening with other browsers too. Please suggest
    Thank You
    Edited by: 831072 on Oct 20, 2011 3:07 PM

    Hi,
    What are your hardware specs ?
    Are you working from a remote environment ? If you are, activating HTTP compression will greatly reduce the time needed to open the forms.
    endy

  • Urgent: Problem opening a data form that uses a smart list

    Hi, we've got a problem with a data form that is quite unusual.
    The data form was working perfectly until yesterday when we put a smart list in it. The smart list is composed of 8 possible choices activated by the following member formula:
    IF (SML==1)
    ((BDG->BegBalance->&CurrYear)/12);
    ELSEIF (SML==2)
    ((INC_BDG->BegBalance)*("01A2"->ACT_FINAL));
    ELSEIF (SML==3)
    ACT_FINAL->&PreYear;
    ELSEIF (SML==4)
    (INC_ACT->&PreYear)*("01A2"->ACT_FINAL);
    ELSEIF (SML==5)
    ACT_FINAL;
    ELSEIF (SML==7)
    (INP_PER)*("01A2"->ACT_FINAL);
    ELSEIF (SML==8)
    INP_ASS;
    endif;
    Initially we tested the functioning of every different choice in the smart list and it was working properly. After a while we tried again to change the choices combination and we couldn't open the data form due to an error.
    It is quite strange because sometimes it work and sometimes it doesn't. In the data form (that is very large) there are many accounts and scenarios that are dynamic calc, in addition to the smart list formula; we tried to open the form two minutes ago converting the data storage type of a scenario from "Dynamic calc" into "Dynamic calc and Store", and it seems to work at the moment... does planning have a memory limit? Can someone suggest a solution (or help us find out the reason)?
    Bye

    Anton,
    new thread is one possibility, but the messsage box is not win message box, but SAP form, so I think you can clcik there without new thread too.
    Check this thread, hope it helps
    Re: Confirmation Dialog in my way

  • Error when opening large data forms

    Hi,
    We are working on a Workforce planning implementation. We have 2 large custom defined dimensions.
    When opening large data forms we get a standard "Error has occurred" error. If we reduce the member selection the data form opens fine.
    Is anyone aware of a setting that can be increased to open large data forms? Im not referring to the "Warn id data form is larger than 3000 cells" setting.
    Im pretty sure there is a parameter that can be increased but I cant find it.
    Thanks for your help.
    Seb

    Hi Seb,
    If you do find the magic parameter then let us know because I would be interested to know.
    It is probably something like ALLOW_LARGE_FORMS = true :)
    In the planning logs is the error related to planning or is essbase related error.
    Is it failing due to the amount of rows or is it because it is going beyond the max of 256 columns ?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to Clear all the data of open windows form of another exe?

    Hi,
    I want to make utility which will clear all the data from one windows application.
    i know the application name. The application of which data i want to clear is made in C# and contains many windows forms and controls.
    out of that opened windows form and controls inside it need to be cleared.
    Please guide on how to do this in C#?

    Short version: Find the window and send it a message with
    SendMessage.
    Open up Spy++ and find your form's window.  You will see that the window has children and they have classes of the form "WindowsForms10.EDIT.*"  Those are TextBox controls.  You can call things like SetWindowText to set the
    text of the window to clear it.
    To do this programmatically, you'll have to obtain the window hand that corresponds to the control.  You can find windows with
    FindWindowEx or
    EnumWindows.  Locate the window by name or class or whatever else you can determine about it.  Find the child windows and "clear" them however you wish.  I assume you mean to set empty strings to all the TextEdit controls. If you
    intend to do something more sophisticated than that, then you'll have to be more specific about what you mean by "Clear all the data".
    It may or may not be obvious that you'll be poking around with Win32 API calls via PInvoke to accomplish much of this. Example:
    SetWindowText via PInvoke.

  • Methods of opening emailed form data

    Hi, I would like to know if there is any way to streamline opening data submitted using the submit email function in LiveCycle Designer 7. Is there anyway to have the data open in the form automatically when the email is received from the customer? It seems quite tedious to rename and save the data file, then go find the appropriate pdf, open it, and then go and import the data. Any ideas???
    Nathan

    > Is there anyway to have the data open in the form automatically when the email is received from the customer?
    No absolutely not. Mail programs have locked out this kind of thing
    very strongly - it would be like saying "how can I have this program
    run automatically when I attach it and send it to a customer".
    > It seems quite tedious to rename and save the data file, then go find the appropriate pdf, open it, and then go and import the data.
    That sounds a bit tedious, though perhaps necessary if there is to be
    any kind of system to storing the files you receive (this is why web
    solutions are so much more preferable).
    But in general you don't have to open the PDF then import the data IF
    the PDF was originally on a web site. Opening the form data will be
    enough, as it will contain the URL of the original data file. This
    won't work, however, if you sent the user a local copy to fill, as it
    will contain the filename THEY used.
    Aandi Inston

  • Data forms not opening

    Hi All,
    We have got hyperion planning & workforce planning plan types in Planning APP,.......all of a sudden the dataforms connected to main plan type stopped opening.....dataforms connected to workforce planning are opening......
    I refreshed the planning.....still dataforms are not opening.
    appreciate your response

    The issue with data forms not opening.....we have recently enabled YTD & QTD in the planning App..........
    1.In the columns if we have YTD(&CurrentMonth) with Suppress missing blocks option selected then dataforms are NOT opening...and if we Unselect Suppress missing blocks the dataforms are opening.
    2.In the columns if we have YearTotal with Suppress missing blocks option selected then dataforms are opening.
    The issue is with using YTD ....how can we solve this issue

  • Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form.

    Hi 
    Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form?
    The second source has a huge list of company names that can be narrrow by email work. 
    background:SP 2010 and Infopath 2010
    CRISTINA&amp MICROSOFT Forum

    I'm not sure if I understood your question clearly but here is a good resource on how to get attributes from "GetUserProfileByName" web services:
    http://blog.mangroveweb.com/pre-populating-an-infopath-from-with-mysql-data-using-a-net-web-service/using-sharepoints-getuserprofilebyname-web-service-to-retrieve-ad-account-information/
    Regarding filtering dropdown list then this could be done by applying form on-load rules. 
    Hope this helps

  • You are not authorized to open the form ORA-01403: no data found

    Hi,
    I have created a new Oracle 10g forms. It compiles sucessfully but when it is opened it gives a error message : You are not authorized to open the form ORA-01403: no data found.
    I am already connected to database. Can anyone please help what is the reason for this issue and any possible resolution?

    Sounds like you have some kind of security enabled.  However, because you didn't share the details about your environment or what you are doing there isn't much we can do is guess.
    Exactly which Forms version are you using?
    Exactly which database version are you using?
    Are you using anything like Oracle E-Business (e.g. template.fmb)?
    Did you create the form with Oracle Designer?
    If you create a simple form using only the DataBlock and Layout Wizards against the Oracle demo schema (SCOTT), does this form run?
    Any additional details outlining what you are doing or have already done might be helpful.

Maybe you are looking for