Opening documents in Id CC 2014

Has anyone else been having issues opening older indesign documents in Indesign CC 2014. I have been able to create new documents, however, the applications freezes while opening Indesign CC documents.
I swear, ever since the update I have had issue after issue. Frankly, I am already sick of it. If anyone has any advice I can take so I can get back to working that would be superb.
I'd also like to raise a giant middle finger to Adobe, thanks for a terribly unproductive month. Cheers!

Tried that numerous times. Doesn't work. Still installs the norwegian version. I*ve even completely uninstalled ID (and removed settings also), restarted, checked that the setting i CC Desktop still is English, installed, and still it installs the norwegian version.... Btw, my Adobe account is ALSO english (USA). The only reason I can figure out is that ther is some file in my system from the first installation, that still meks it install in norwegian.

Similar Messages

Unable to change/reset colors with open document in Photoshop CC 2014

I have the 2014.2.2 release of Photoshop CC 2014 and am suddenly unable to change or reset colors with an open document. I get a "Could not complete your request because of a program error" message. After closing the document (or before opening one) I can change colors okay. But not with a document open.

OK, then resetting Photoshop's preferences is the next thing to try. But first, save a copy of the existing preferences - we may need them to figure out what is going wrong.
See this page for ways to reset your prefs: Photoshop Help | Preferences

Muse 2014.1.1.6 Freezes on Save and Re-Opening Document

I was editing and removing Paragraph Styles. Then I edited text with "local" styling (bolded and italicized type -- didn't see the need make a Character Style for that). I did a "Save." Then it freezes, will not close or quit. Force Quit necessary.
After restarting Muse, it freezes opening this document. I will have to rebuild all of my edits for 3rd time from previous build.
Dialog Box:
"Adobe Muse CC has encountered an error and will exit. Please report the last few actions you took leading up to this error to the Adobe Muse CC team.
[TA/localAttributeValue] Error: Error
#1023: Stack overflow occured.
Please advise [email protected]
Using Macintosh --- MacBook Pro (new), 16GB RAM, OS 10.9.4
SUGGESTION: PLEASE MAKE PREVIOUS VERSIONS OF MUSE AVAILABLE AS WORKAROUND TO HAVING MY APPLICATION CRASH!
I WILL HAVE TO GO TO MY OLD COMPUTER AND BUILD THIS SITE PRE-2014 CC.

Thanks Zak.
I am redesigning pages and eliminating Paragraph Styles I no longer want to use. After removing Paragraph Styles (one-by-one replacing with new style) and other editing, Muse freezes upon “Save” and re-“Open”.
Then I began editing older version of site on my older Mac computer running 10.6.8 and Muse 7.x and encountered same problem. I am able to re-Open document in Muse 7.x if I have not removed any Paragraph Style — so far. Must be an error in my document.
Any help on this is appreciated! — Jim Hance
Document attached.

My mini Mac with a i5 processor is extremely slow to open documents and programs. Is there a solution to this??

Anyone can asset me please. My mini Mac is a 2.3 GHZ i5 Core. 8 GB Ram 13333 MHz with OS 10.7.5.
Pretty much since day one this computer is very..extremely slow to respond to any command. Opening documents or programs the system spin for ever.
Any idea what could be causing this??? I was told that to many pictures slow down the system, I have only 700 pic on file

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS5ServiceManager com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.Java-Updater com.oracle.java.JavaUpdateHelper ' ' 879294308 1083382502 1274181950 464843899 1233118628 3301885676 891055588 998894468 695903914 1106243579 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' '/\./p' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Developers I need an applescript that opens documents in excel from a specified folder and saves them as .xlsx from their current .xlsb

mule13470
Apr 3, 2014 11:12 AM
I tried simply renaming them however it just corrupts the files when I do it like that so I need the applescript to open the files in excel and the save them as .xlsx to test I only need it one folder but if it works I'd like to be able to do it for all documents with .xlsb extentions that are in a huge folder with subfolders that contain a mix of .pdf, .docx, .xlsx and .xlsb. Please Help.
Applescript Editor, Mac OS X (10.6.8)
I have this question too (0)
Reply
Categories: Using OS X MavericksTags: mac, help, finder, excel, applescript_editor
Level 1 (0 points)
mule13470
Re: I need an applescript that opens documents in excel from a specified folder and saves them as .xlsx from their current .xlsbApr 3, 2014 11:19 AM (in response to mule13470)
In that huge folder I only need the .xlsb files opened and saved to .xlsx not the others, in case that wasn't clear above.

In that huge folder I only need the .xlsb files opened and saved to .xlsx not the others, in case that wasn't clear above.

An error has occurred while opening the Premiere Pro CC 2014: Premiere Debug Event

An error has occurred while opening the Premiere Pro CC 2014: Premiere Debug Event
[c: \ cloudroom \ releases \ 2014.9 \ shared \ adobe \ mediacore \ mediafoundation\API\in
I don't know what to do, any help?

Delete the Effect Presets and Custom Items.prfpset, located in
C:\Users\<username>\Documents\Adobe\Premiere Pro\8.0\Profile-<username>
when succesfull make new project and import old one into new one.
Might need to reset current workspace and pull down the audiotracks first to reveal videotracks.

How do you place an image on 'new background" when open documents in tabs is unchecked

I am trying to use "mirror technique" (watching videos to learn)
I opened image in PS 2014....with "open documents as tabs is Unchecked..
made a new document the size that will hold the doubled image...
duplicated the image
flipped horizontal...
but when I place on "new document"...nothing happens....just separate windows..
thanks

On image 1, CTRL+A to select all.
CTRL+C to copy.
Switch to image 2, CTRL+V to paste.
Click on Move tool and adjust layer placement as needed.
Nancy O.

How to carry forward any open documents in a new SAP B1 Implementation

Hi,
I want to know what are the best practices to record any open documents during a fresh SAP B1 implementation.
The client has an existing running business and may be implementing SAP B1 at the start of the financial year or during the middle of the financial year.
How do I enter the open documents as on the go-live date; documents like open Purchase Orders, open Sales Orders, open GRPO, open Deliveries, etc.
What are the multiple approaches / alternatives to evaluate and what are the best practices?
Note: I am not talking merely about the GL or Inventory Opening Balances, but the entire set of open documents!
Thanks.

1. When it comes to documents that post to the G/L you want those posted the day you go live as this is part of your opening balance. This would be for you A/R and A/P Invoices. Just make sure the Due Dates are correct and the G/L account is your Opening Balance account. Why? So you can run a trial balance for that day. So in your case I would either do 1-SEP-2014 or 31-Aug-2014. Again I prefer to enter them in as the day before go live so that I can easily run a Trial Balance on my opening transactions. I have yet to have the opening balance balance out on these imports.
2. I would go with the open items on the PO. Why? Less work and still accomplishes the need for open items. In all cases add the original document # from the legacy system in the remarks so you can always find the original.
3. Once again, I would go with only the open balance. Why? It is less work and you can always record any audit remarks in the remarks section of the document. Remember the goal is to import your opening balance. You do not want to step into historical data, it is not easy and takes a long time. So unless the customer is paying for it, this can become a money loser. If analysis is need on historical data, then they have their legacy system to look at.
4. The whole reason for the Service Type invoices is purely for the opening balance of the Accounts Receivable and Accounts Payable opening balances. The document total should be the total for the amount that is owed as this is your opening balance for the A/R and A/P accounts along with the customers and vendors sub ledger.
5. Yes. It can be done through the DTW. I haven't tried the new features on the Inventory Counting, but I believe they have added an import feature. Either way should work as long as you get the inventory in the correct places and the inventory accounts to the correct value.
Remember, opening balances are meant to be the values of the legacy system as a snapshot in time. This means that inventory is correct and in the correct place and most importantly the accounts are correct. The reason for the Opening Balance account is as an offset account to the journal entries you create for importing these opening documents. In the end, the Opening Balance account should be 0 if the legacy system is balance.

Script to copy Layer/Group to another Open Document?

Hi, I know this topic has been covered many times before. But to clarify, here's what I'm wondering:
Copy the active layer/group to another open document in Photoshop. The simple way is to go to "Layer/Duplicate Layer..." . But this is very tedious. For starters, when you choose that method, and then select the document that you'd like to copy to via the pull-down menu, it successfully copies the layer/group to that document, but it doesn't auto-switch (activate) to the document it was just copied to. You have to hit "Ok", and then manually search through the open documents list via (Window/*choose your document*) to get there. This is a nightmare when you're trying to do this many times.
Here is what I am wondering:
Is it possible to:
a) copy the active layer/group to the clipboard/memory
b) switch to another existing document in Photoshop *via a custom menu* which shows all existing documents
c) once switched to the new existing document, paste that layer/group from the clipboard into that document
..is that possible?
At the very least, are there any scripts that anyone knows of that allows the user to switch between existing documents via a custom menu instead of going to Window/*choose your document* ?

This might help with Groups and some other kinds of Layers.
But it takes the easy route with the target file by using the name to identify it.
// some amendments to pixxxelschubser’s code;
// 2014, use it at your own risk;
#target photoshop
var aDoc = app.activeDocument;
var AllDocs = app.documents;
var actLay = aDoc.activeLayer;
var theIndex = getSelectedLayersIdx();
if (AllDocs.length > 1) {
var itemDoc = null;
var win = new Window("dialog","Copy the active layer");
this.windowRef = win;
win.Txt1 = win.add ("statictext", undefined, "Paste in which open document?");
win.NewList=win.add ("dropdownlist", undefined)
for (var m = 0; m < AllDocs.length; m++) {
win.NewList.add("item", AllDocs[m].name)
win.NewList.selection = 0;
itemDoc = win.NewList.selection.index;
win.cancelBtn = win.add("button", undefined, "Abbruch");
win.quitBtn = win.add("button", undefined, "Ok");
win.defaultElement = win.quitBtn;
win.cancelElement = win.cancelBtn;
win.quitBtn.onClick = function() {
win.close();
win.NewList.onChange= function () {
    itemDoc = win.NewList.selection.index;
    return itemDoc;
win.show();
// duplicate layers;
for (var n = 0; n < theIndex.length; n++) {
duplicateLayer (theIndex[n], String(win.NewList.selection))
app.refresh();
} else {
    alert ("No other documents open")
////// duplicate layer //////
function duplicateLayer (theIndex, theDoc) {
// =======================================================
var idDplc = charIDToTypeID( "Dplc" );
    var desc7 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref3 = new ActionReference();
    ref3.putIndex(charIDToTypeID("Lyr "), theIndex);
    desc7.putReference( idnull, ref3 );
    var idT = charIDToTypeID( "T " );
        var ref4 = new ActionReference();
        var idDcmn = charIDToTypeID( "Dcmn" );
        ref4.putName( idDcmn, theDoc );
    desc7.putReference( idT, ref4 );
    var idVrsn = charIDToTypeID( "Vrsn" );
    desc7.putInteger( idVrsn, 5 );
executeAction( idDplc, desc7, DialogModes.NO );
////// by paul mr;
function getSelectedLayersIdx(){
      var selectedLayers = new Array;
      var ref = new ActionReference();
      ref.putEnumerated( charIDToTypeID("Dcmn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
      var desc = executeActionGet(ref);
      if( desc.hasKey( stringIDToTypeID( 'targetLayers' ) ) ){
        desc = desc.getList( stringIDToTypeID( 'targetLayers' ));
          var c = desc.count
          var selectedLayers = new Array();
          for(var i=0;i<c;i++){
            try{
              activeDocument.backgroundLayer;
              selectedLayers.push( desc.getReference( i ).getIndex() );
            }catch(e){
              selectedLayers.push( desc.getReference( i ).getIndex()+1 );
      }else{
        var ref = new ActionReference();
        ref.putProperty( charIDToTypeID("Prpr") , charIDToTypeID( "ItmI" ));
        ref.putEnumerated( charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
        try{
            activeDocument.backgroundLayer;
            selectedLayers.push( executeActionGet(ref).getInteger(charIDToTypeID( "ItmI" ))-1);
        }catch(e){
            selectedLayers.push( executeActionGet(ref).getInteger(charIDToTypeID( "ItmI" )));
      return selectedLayers;

Open document issue using Xcelsius WIH 00013

All,
I have Open Document that behaves correctly when I copy and paste it into address bar of a browser. It also works fine when I try to connect from one Webi report to another (so far so good). But when I use the link in Xcelsius, via a URL component, I get the following message:
Invalid Session: Please close your browser and logon again. (WIH 00013)
Previous posts on forumtopics.com suggests that this is a Tomcat time out issue. However, other open document calls from other Xcelsius dashboards with open document work without issue. Has anyone seen this before? I have included the hyperlink text. Please note long prompt text is courtesy of a BEx query in BW .
http://<web server>:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=8547&lsSCompany%20Code%20(Single%20Value%20Entry%2C%20Required)=1000&lsSCurrent%20Fiscal%20Year%20(Single%20Value%20Entry%2C%20Mandatory)=2009&lsSFinancial%20statement%20version=cddFinancialStatements&lsSPosting%20Period%20(Single%20Value%20Entry%2C%20Mandatory)=003&lsSaccount=cdd+21
Thanks,
Steve

The same settings in the infoviewapp web.xml must be applied on the opendocument web.xml. Also you must be on XI 3.1 FP1 or higher. There is currently an Edge issue being investigated.
Regards,
Tim

Problem Saving or Opening Documents with Office 2013 Home & Business

Hello there,
as the title says, I'm running into a problem when trying to save or open Documents in Word,Excel,etc. (all Office Programs)
I get the message "Microsoft Word stopped working". Or Excel, Powerpoint...
I already tried to deinstall and used the Office-FixIt-Tool to clean the PC.
I also updated the driver for my Graphic-Card, installed the newest Windows-Updates and checked if it is caused by an Add-In.
None of this helped. The Problem still exists when starting in Safe-Mode.
In Event-Viewer I get this Message:
Name der fehlerhaften Anwendung: WINWORD.EXE, Version: 15.0.4673.1000, Zeitstempel: 0x54588338
Name des fehlerhaften Moduls: unknown, Version: 0.0.0.0, Zeitstempel: 0x00000000
Ausnahmecode: 0xc0000005
Fehleroffset: 0x00000000
ID des fehlerhaften Prozesses: 0x588
Startzeit der fehlerhaften Anwendung: 0x01d024187bb58e06
Pfad der fehlerhaften Anwendung: C:\Program Files\Microsoft Office 15\root\office15\WINWORD.EXE
Pfad des fehlerhaften Moduls: unknown
Berichtskennung: bf49a2b4-900b-11e4-bbbd-4437e6c80968
or this one:
Name der fehlerhaften Anwendung: FIRSTRUN.EXE, Version: 15.0.4665.1000, Zeitstempel: 0x54339094
Name des fehlerhaften Moduls: unknown, Version: 0.0.0.0, Zeitstempel: 0x00000000
Ausnahmecode: 0xc0000005
Fehleroffset: 0x00000000
ID des fehlerhaften Prozesses: 0x15f4
Startzeit der fehlerhaften Anwendung: 0x01d0241b0af94938
Pfad der fehlerhaften Anwendung: C:\Program Files\Microsoft Office 15\Root\Office15\FIRSTRUN.EXE
Pfad des fehlerhaften Moduls: unknown
Berichtskennung: 48c2649c-900e-11e4-bbbd-4437e6c80968
If I start Windows in Safe-Mode and try to start one of the Office-Products I get another error, something like:
Your Program could not be started. Please try again.
OS: Windows7 64Bit
Hope there is a fix for this...
Thanks in advance!
marcus

Hello George,
No, it has never worked.
For testing I installed Office 2010 and this worked fine.
But as I said, all versions had been deinstalled before reinstalling Office 2013 (even cleaned up with the FixIt-Tool).
Best Regards
marcus

Open document sso in XIR2

Hello,
I have query on configuring open document sso in XIR2.
We could configure open document sso on XIR3.1 from the SAP Notes available ,i.e by configuring Kerberos SSO as a prerequisite & changing web.xml file for open document.
Do we need to follow the same procedure for XIR2,We could not find any related documents on open document sso.
We have a Env still in XIR2 which is configured in NTLM.We need to configure open document sso for few clients.Do we need to shift to Kerberos? Can we configure open document sso with IIS?
Please let us know what are our possibilites?
Thanks
Collin

Hello from Spain!
i'm trying to configure a system with BOXI 3.1 and SSO with AD Kerberos.
The system is ok when I open infoview main screen and the user doesn't need to put its credentials. Tha's fine.
But, when I try to open a report with a openDocument url the system is asking me by user and password. I need to avoid this behaviour. Is it possible?
This is the url that I'm using: http://svdapp02:8080/OpenDocument/opendoc/openDocument.jsp?sType=wid&sDocName=ace002
I have read something about change the web.xml file but I don't know how becasue I can't see an option in this file for Kerberos (I only see one tag for Vintela)
Please help
Thanks in advance

How to Change URL of BPA after clicking on Open Document in PO Notification for India Localization?

In the Purchase Order Approval workflow notification , there are two links at the bottom of page under heading REFERENCES,
- view PDF
- open document
So when we click on open document, the Oracle Forms loads and purchase order screen will appear in the screen.
In case of India localization, for standard PO the India local screen opens, where we can see the taxes by clicking on Taxes Button.
But in case of blanket purchase agreements, when we click on open document link from the notification,we are routed to the application with the screen of global purchase order, instead it
should go to Purchase Orders(Localization).
We want to move to the India local po screen for BPA.
So please let me know, where I can change the URL for Blanket Purchase Agreements.
Regards
Sandeep

Hi kalyani,
Please check my inbound plug code...tell me what changes wee need to do and where wee need to add this code...once again thanks for your reply..
METHOD
ip_inboundplug.
**CALL METHOD SUPER->IP_INBOUNDPLUG
** EXPORTING
** iv_collection = iv_collection.
DATA: lt_ivr_url_param TYPE tihttpnvp,
ls_ivr_url_param TYPE ihttpnvp,
lr_searchcustomer TYPE REF TO if_bol_bo_property_access,
ls_searchcustomer TYPE crmt_bupa_il_header_search.
CALL METHOD cl_crm_ui_session_manager=>get_initial_form_fields
CHANGING
cv_fields = lt_ivr_url_param.
lr_searchcustomer ?= me->typed_context->searchcustomer->collection_wrapper->get_current( ).
CHECK lr_searchcustomer IS BOUND.
READ TABLE lt_ivr_url_param INTO ls_ivr_url_param WITH KEY name = 'sap-phoneno'. "'sap-phoneno'.
IF ls_ivr_url_param-value IS NOT INITIAL.
ls_searchcustomer-telephone = ls_ivr_url_param-value.
CALL METHOD lr_searchcustomer->set_properties( EXPORTING is_attributes = ls_searchcustomer ).
eh_onsearch( ).
ENDIF.
ENDMETHOD

I am trying to use the new iwork beta tools on iCloud. I currently have 10.8.4 OSX on my iMac and 6.0.5 version of Safari, but when I try to open documents on my iphone in the cloud it tells me my browser isn't supported

I am trying to use the new iwork beta tools on iCloud. I currently have 10.8.4 OSX on my iMac and 6.0.5 version of Safari, but when I try to open documents on my iphone in the cloud it tells me my browser isn't supported

Note that iWork for iCloud is only designed for PCs and Macs > http://support.apple.com/kb/HT5779
To access to your iWork documents on the iPhone, install Keynote, Numbers or Pages from the App Store

How to clear the open documents in case if document currency and local curr

Hi,
Can anyboday advise how to clear the open document of a particular vendor for a particular company code. Here the issue is that balace is netted to Zero in the document currency but not in the local currency. The document was posted in Currency CAD and the local currency is GBP.
When i check the FBL1N, there is it showing net balance is ZERO, but document is still in open
status. I tried using Transaction code F-44, but it is not allowing me.
Can anyboday advise how to perform this. Points will be awarded.
Regards,
Sree.

Hi,
In the Company code global parameters(OBY6),select the check box "NO FOREX RATE DIFF.WHEN CLEARING IN LC"
and try clearing again.(You can have a F1 help on the check box to see what exactly it is).
Hope this will resolve
Assign points if useful
Thanks
Aravind
Edited by: Aravind Aitipamula on May 22, 2008 1:36 AM

Opening documents in Id CC 2014

Similar Messages

Maybe you are looking for