Opening documents with Show All

In the Open dialog selecting Show all - will inconsistently open some doc's but not others. If I specify the format ( example= RTF or Word Mac 98 ) most times it will open it. All these documents work fine with every other application. What gives?
Is there a way to make the default in the Open screen " Show All " and have it work as it should?
Thx

Hello
Is there a way to make the default in the Open screen " Show All "
Response : NO
and have it work as it should?
I don't know what to write. On my machine it works as it is made for
Yvan KOENIG (from FRANCE dimanche 15 janvier 2006 18:01:49)

Similar Messages

Open Documents with Office Web App - SharePoint 2013

We have configured Office Web App for our SharePoint 2013 Farm and in Site settings, Site Collection Features, have disabled "Open Documents in Client Applications by Default" . Out of 15 sites, all documents in 13 sites open in Office
Web App. One of the 2 sites where the document still open using Client Application is a Wiki site.
Advanced propertied for the libraries settings has been set to "Use the server default (Open in the browser)". Anything else to check to open documents in Office Web App?
Thanks
MP

Hi,
As I understand, you encountered the issue when you want to open documents with Office Web App.
Check things below:
1. In the library setting->advanced setting, you can choose the open in the browser to see if the same situation will occur.
2. Check if you have not enable the Open Documents in Client Applications by Default feature.
If you choose Activate to enable the Open in Client feature (documents will open in the client application), or
Deactivate to disable the Open in Client feature (documents will open in the browser).
You can go to Site setting->site collection administration->site collection feature->Open
Documents in Client Applications by Default to set the feature.
The article below is about how to set the default open behavior for browser-enabled documents.
https://technet.microsoft.com/en-us/library/ee837425(v=office.15).aspx
The article below is about how to configure office web apps for SharePoint 2013.
Configure Office Web Apps for SharePoint 2013
Best regards
Sara Fan
TechNet Community Support

Automatically open document with Pages 5

When I upgraded from Pages 4.3 to 5x, documents were automatically set by the installation to all open with version 5.0.x . Due to some initial problems with Pages 5, I changed the setting so that Pages 4.3 opened all documents. I did that by command-i, get info, open with Pages 4.3, and change all.
Now I want to default back to opening with pages 5.0.1, but if I do the same procedure (command-i, get info, open with Pages 5, and change all), Pages is still opening documents with version 4.3.

All Pages files no matter what version and incompatibility have the same extension .pages.
That makes it impossible to get the System to stick with a choice in Finder.
Trash/archive whichever one you don't want.
Peter

I have imported all photos and videos from my iPhone 5S into Aperture ver.3.4.5 and now cannot find them. I thought I could open a panel showing all imports and merely list them chronologically, but I don't see how to do this.

I have imported all photos and videos from my iPhone 5S into Aperture ver.3.4.5 and now cannot find them. I thought I could open a panel showing all imports and merely list them chronologically, but I don't see how to do this. There are over 1800 photos and about 100 videos, any help to locate where they've gone would be appreciated.

Try to search with a Smart Album for photos and videos taken with an iPhone:
File > New > Smart Album:
Add an EXIF rule fro the "Add Rule" drop down menu: EXIF
and set it to "Camera Model includes iPhone".
Set the scope of the search to "Library"
If there are any iPhone images or videos in your library at all, this search should find them. Then ctrl-click any of the items and select "Show in Project" from the contextual menu.
Generally, Aperture should be showing your last import in the "Last Import" smart album in the "recent" section". And the "projects" view can be sorted by date, so you should see your recent imports.
You may want to check all search fields, if searches are active.

Error when opening document with ECL control: INVALID_DATA

Hi Gurus,
I've tried to search the net for this problem but could not find anything and I'm stuck now.
Description:
we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
when we try to open this document, time-to-time we get following error:
Error when opening document with ECL control: INVALID_DATA
Message no. SDV004
by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
Thanks,
David

Hi Christoph,
thanks for tip, unfortunately this was already flagged, currently settings are:
for Display Settings:
yes - include ECL control
use HTML control
empty - maximum viewer wait time
(do you think that setting some value for this could help)
yes - deactivate generic object services in viewer
no - doc display as dialog box
yes - deactivate data provider cache
Storage Settings:
yes - always copy document class from document type
yes - permit multiple assignment
Thanks,
David

Photoshop crashes when I open documents with a diferent ICC profile

i just installed an epson Plotter and since every time I try to open documents with different ICC profile after photoshop ask's me to change the color configuration it crashes. I really need help with this issue.

I solved the problem by creating a spare user account. thanks for the help. now the issue is that I can't find, the corrupt file or what ever is making the original problem happen which is still happening in the main user account. my guess is that the corrupt file comes from the printer.
everything started to happen after I installed the printer which is an EPSON Pro 7600.
any Ideas how could I find the problematic file.
and if any of you have any Tips how to install the printer with out having problems I will really appreciate it.
thanks everyone for the help. everything was clear enough to get to know how mac works.

SAP DMS : Error when opening document with ECL control: INVALID_DATA

We are receiving following error while try to view .FAX file through SAP Document viewer
"2D viewer - Unable to opend Document"
"Error when opening document with ECL control: INVALID_DATA"
Appreciate your quick effort.
Thanks,
Sam.

Yes, We have checked in both ways, I have also followed other threads on the same issue
But not able to find the solution for the issue. We are facing the issue when we are using files scannned by Kodak Scanner i1420 in tiff format.
But If I will attach any other tiff files from directory then It can viewed through SAP Document Viewer.
I appreaciate your help in this regards.
Thanks,
Sam,

Opening documents with custom layer structure, especially default layer unlocked...

Hi, is it possible to open documents such as jpg screenshots which are apparently a locked layer by default, as instead an unlocked layer?
Would it even be possible/easy to have a method of opening such documents with the following layers:
1 original image (unlocked)
2 blank transparent layer
3 white locked background
4 group folder called 'archive' with a copy of the original image, with the group set to invisible
Could a droplet be made to open documents with such a "precreated" layer set-up?
For example, I would like to take a screenshot or scan, drag it onto a droplet, and have it open with the layer structure outlined above.
Thank you thank you thank you...

"The image is NOT locked."
Shesh whatever you call it the image the background the initial layer "the so called layer" I would just like to change its default opening to UNLOCKED so at minimum, as I have said four times now, it can be placed in a folder called "Archive" without having to f'ing unlock it...scripting additional opening actions in addition to that at this point must be beyond your imagination
"Have you tried working on the so called locked layer?"
HAVE YOU READ THE ORIGINAL QUESTION????
Working on the background layer is not my primary concern, organizing layers automatically at the start of a workflow is...but nevertheless...erasing part of the background in order to reveal imported images or drawings created beneath it on new layers requires the background be unlocked (so erased sections are transparent rather than black), changing layer order requires unlocking, moving the background on a resized canvas requires unlocking....and of course placing it within a folder requires unlocking -- what the hell is the advantage of it being default locked?? why isn't this optional?
I can't imagine people working on complex images with multiple folders and forty plus layers in various folders and such -- nevertheless consistently want to leave the background layer just sitting there hanging out in its default locked state. I'm ALWAYS unlocking the damn layer...if only, for the FIFTH TIME, for organizational purposes (to change its layer order and place it within a folder).
SHESH!
"Methinks..." Oh please...next time read the question.

I can't open 1 website 'consumentenbond.nl' since a week. get: 'An internal server error occurred. Please try again later.' but i can open it with explorer. all other websites work perfectly with mozilla.

i can't open website: 'consumentenbond.nl'
since a week.
i get: 'An internal server error occurred. Please try again later.'
but i can open it with explorer all the time.
all the other websites are working perfectly with firefox.

Try clearing the cache and deleting cookies for the site, this can sometimes help with accessing a site that previously worked. For details see [[how to clear the cache]] and [[deleting cookies]].
For other things to check see http://kb.mozillazine.org/Error_loading_any_website#Error_loading_some_websites

Open items also show all cancelled documents

Hi Gurus,
When the business users review all open items, it also shows any associated cancelled documents (S1, S2). Is there a way to prevent cancelled documents from showing?

What do you mean by cancelled documents - closed items ???
If so, go to FBL1/3/5N and then click on Open Items instead of all items.
Or go to F-03 and clear the offsetting entries i,e if an account has 3 open line items and if 2 offset each other, you can clear the 2 items using F-03.
Thanks,

How do I replace bookmark bar that was lost when a new Mozilla Fox Start page suddenly appeared with a Zone Alarm Community Toolbar, and nothing I have so far tried, working with "Show all Bookmarks", works ("Unable to process the backup file).

My current version is 6.0.2. A box appeared a few days ago informing me of an update to 7 (x?). I declined for the time being.
Then a Start Page just showed up missing the bookmark tool bar. I tried to import a bar from another browser. Nothing showed up. Then, I went to "Help". First, I clicked on "About Firefox" where I was informed of an update. This time, I tried it. When I clicked on "Apply Update", I received a message; 'Update could not be installed" despite there being no other Firefox browsers running.
I went back to "Help" and clicked on "Firefox Help". A page came up with the URL in place, but the page would not load ("Cannot find server at support.mozilla.com"). After several clicks on "Try Again" with the same result, I copied the URL and pasted it into a different browser, from which I am now working.
Before sending this question, I tried the two procedures ("Manual Backup" and "Restoring From Backup") found on Bookmarks/Show All Bookmarks/Import And Backup/Restore, using both "stored backups" from Mozilla's Profile folder and "Choose a file", as well as Bookmarks/Show ... /Backup. In each case, the response was, "Unable to process the backup file".
I had previously tried another method I found on Google which involved copying and saving a Mozilla backup file (this is the file I used in the procedure above - "Choose a File") found in the C:/Documents And Settings/.../Profile Folder, then renaming the original file "backup.HTML" and saving it in a folder one level up from its original location. The Bookmark bar was to show up after shutting down and reopening Mozilla - it never happened. I replaced the original backup file.
It occurred to me to locate the Bookmark File for this browser (Chrome) and using it in the "Choose a File" method, referred to above. But there is no extension included in the file name, and I was afraid to try it.
I'm out of ideas. Is there something else to try?

Check that the Bookmarks Toolbar is visible and that the "Bookmarks Toolbar items" is still placed on the Bookmarks Toolbar.
If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" or other items that are missing in the toolbar palette or on a toolbar then click the "Restore Default Set" button
See also:
*http://kb.mozillazine.org/Uninstalling_add-ons
*http://kb.mozillazine.org/Uninstalling_toolbars

Unable to open documents with policies

We are using a test version of the policy server to evaluate the features of the product.
We had some trouble to install the server and to use it with Adobe Professional but now we can protect pdf files with policies. Most of the problems was solved with the help of articles in these forum :-)
Unfortunately we are not able to open the documents with the Adobe Reader :-( Only the computer on which the documents were protected is able to show the files. On all other computers we became the error message
b "Your computer has to be connected to network. Your right to open these document offline is expired."
In German: b "Dieser Computer muss mit dem Netzwerk verbunden sein, um dieses Dokument zu öffnen. Ihre Berechtigung, dieses Dokument offline zu öffnen, ist abgelaufen. Wenn dieser Computer nicht mit dem Netzwerk verbunden ist, stellen sie eine Verbindung her, und versuchen sie erneut, das Dokument zu öffnen."
The policy server is reachable with browser and ssl works.
Reader versions: 7.0.0, 7.0.5, 7.0.8
Regards

It's been my experience that when you get the "Not Connected to Network" message, it simply means that the client PC doesn't have the certificate of authentication installed.
I suggest that you check to see if the certificate is installed on the PC that's connecting. (In IE, you would click on Tools-Internet Options-Content-Certificates.) Then check a computer that's not connected. If there is no certificate installed, it won't connect. To install a certificate, you must click "View Certificate" immediately after a hitting the page and getting the security dialog warning, then click "Install Certificate."
Hope this helps.

Problem Saving or Opening Documents with Office 2013 Home & Business

Hello there,
as the title says, I'm running into a problem when trying to save or open Documents in Word,Excel,etc. (all Office Programs)
I get the message "Microsoft Word stopped working". Or Excel, Powerpoint...
I already tried to deinstall and used the Office-FixIt-Tool to clean the PC.
I also updated the driver for my Graphic-Card, installed the newest Windows-Updates and checked if it is caused by an Add-In.
None of this helped. The Problem still exists when starting in Safe-Mode.
In Event-Viewer I get this Message:
Name der fehlerhaften Anwendung: WINWORD.EXE, Version: 15.0.4673.1000, Zeitstempel: 0x54588338
Name des fehlerhaften Moduls: unknown, Version: 0.0.0.0, Zeitstempel: 0x00000000
Ausnahmecode: 0xc0000005
Fehleroffset: 0x00000000
ID des fehlerhaften Prozesses: 0x588
Startzeit der fehlerhaften Anwendung: 0x01d024187bb58e06
Pfad der fehlerhaften Anwendung: C:\Program Files\Microsoft Office 15\root\office15\WINWORD.EXE
Pfad des fehlerhaften Moduls: unknown
Berichtskennung: bf49a2b4-900b-11e4-bbbd-4437e6c80968
or this one:
Name der fehlerhaften Anwendung: FIRSTRUN.EXE, Version: 15.0.4665.1000, Zeitstempel: 0x54339094
Name des fehlerhaften Moduls: unknown, Version: 0.0.0.0, Zeitstempel: 0x00000000
Ausnahmecode: 0xc0000005
Fehleroffset: 0x00000000
ID des fehlerhaften Prozesses: 0x15f4
Startzeit der fehlerhaften Anwendung: 0x01d0241b0af94938
Pfad der fehlerhaften Anwendung: C:\Program Files\Microsoft Office 15\Root\Office15\FIRSTRUN.EXE
Pfad des fehlerhaften Moduls: unknown
Berichtskennung: 48c2649c-900e-11e4-bbbd-4437e6c80968
If I start Windows in Safe-Mode and try to start one of the Office-Products I get another error, something like:
Your Program could not be started. Please try again.
OS: Windows7 64Bit
Hope there is a fix for this...
Thanks in advance!
marcus

Hello George,
No, it has never worked.
For testing I installed Office 2010 and this worked fine.
But as I said, all versions had been deinstalled before reinstalling Office 2013 (even cleaned up with the FixIt-Tool).
Best Regards
marcus

"Open document with" has started to appear

GroupWise 7 client and server - we do not integrate our documents with the
appropriate applications when installing GroupWise clients.
Until recently when double clicking on a document in the library - either
by browsing the library directly or using Find - GroupWise fired up the
appropriate application (usually MS word from Office 2003) then loaded the
document, returning it to the library when you had finished editing.
We are now being asked to select the application to be used to open the
document, even though the icon for the file type in the library shows the
correct application.
This has started recently for me and other users. As far as I know we have
made no changes. Is there any way to force GroupWise to use the appropriate
application without prompting the user.
This problem does not occur if I use Windows Explorer to browse documents
on the local machine or on the network - so Windows knows the correct
application to use to open the .doc files.
Thanks
Ian

More information:
It's a particular problem with GroupWise. When I double click on an
attachement to an e-mail, where the default action is to open, I'm also
presented with a list of programs to use to open the document. Even when I
say "Always use the selected program to open this kind of file" the setting
does not stick.
Yet double clicking on a .doc file in Windows Explorer always loads word
and opens the doc without asking me which program to use. So my PC knows
about the correct file associations - it's GroupWise that forgets
Thanks
Ian
> Ian,
>
> If you look at the document properties, the version tab, is the file =
> extension correct?
>
> Tony
>
>
> >>> <[email protected]> 6/5/2006 9:48 PM >>>
> GroupWise 7 client and server - we do not integrate our documents with the
> appropriate applications when installing GroupWise clients.
>
> Until recently when double clicking on a document in the library - either
> by browsing the library directly or using Find - GroupWise fired up the
> appropriate application (usually MS word from Office 2003) then loaded the
> document, returning it to the library when you had finished editing.=20
>
> We are now being asked to select the application to be used to open the
> document, even though the icon for the file type in the library shows the
> correct application.
>
> This has started recently for me and other users. As far as I know we have
> made no changes. Is there any way to force GroupWise to use the appropriate=
>
> application without prompting the user.=20
>
> This problem does not occur if I use Windows Explorer to browse documents
> on the local machine or on the network - so Windows knows the correct
> application to use to open the .doc files.
>
> Thanks
>
> Ian
>

SSHR - APPROVAL CHAIN IS OPEN, APPROVAL LIST SHOWS ALL SUPERVISORS

Hi,
In SSHR,I'm trying to raise any Approval Based Request like leave of Absence, Appraisal etc.. in approvers list shows
all Supervisor list.
We are using Seeded Workflow with Customized menu, Responsibility. We have the same issue with seeded responsibility also.
The Approval Chain is open and its keep on adding the Approver List based on
supervisor Chain.
We haven't defined "Supervisor Hierarchy "
Pl suggest

You may need to configure AME and redefine the default approver rule. I believe the default rule 'out of the box' is approval up 10 levels of the supervisor hierarchy. If you change that action to the action that matches up to approval up 1 level of the supervisor hierarchy, I think you'll be where you want to be.

Opening documents with Show All

Similar Messages

Maybe you are looking for