Opening Excel Report results in 'Errors were detected in File .....'

Dear Professionals,
Ive an Excel report that upon openning produces the following error.
'Errors were detected in file 'T:\Customer .......'
Excel proceeds to strip out the ALL the Query Tables from the report discarding them due to integrity problems as described in the original error.
Query Table 'ExternalData_2' on '[xxxxxx Report - April FY14_v1.12.5.1.xls]SoldTo' was discarded due to integrity problems.
The query tables are connected to an 2010 MSAccess db on a networked drive. The file was created with Excel 2013 on a virgin machine, no add-ins are active. The file is saved in Excel .xls (2003) format.
While the error seems to only make cosmetic changes, the data seems intact. However it is an confidence issue for the end user to encounter such an error as these reports go to external customers.
I've circumvented the error by converting the Listobjects to Ranges prior to saving the file but I'd like to get to the root of the problem please.
Ive looked at disabling the office validation feature, however this is short term local solution that didnt seem to work and not practical going forward.
Also seemingly related, when compiling the report in Excel 2010 it randomly crashes at the point where the .Save method is executed (locally or to network). This crash disappeared when the report was compiled with Excel 2013. I've also not experienced
the crash since the Listobjects were converted to ranges when compiling in Excel 2010.
Any help / pointers would be most appreciated.
Kind regards,
David

Hi,
Thank you for using Excel IT Pro Discussions forum.
Are you using Office 2010 RTM version? If it is trial version or beta version, I suggest upgrading it to the RTM version.
First, please check if this KB article helps:
Error message when you try to open a workbook in Excel 2007: "Excel found unreadable content in Book_Name"
http://support.microsoft.com/kb/929766
Note: The steps are for Excel 2007. The steps in Excel 2010 are similar.
If the problem persists, let’s also check the following settings in Excel 2010.
========
1.
In Excel 2010, click File > Options > Trust Center > File block settings.
2.
Check the checkboxes before:
Excel 2007 and later Wordbooks and Templates
Excel 2007 and later Macro-Enabled Workbooks and Templates
Excel 2007 and later Add-in Files
Excel 2007 and later Binary Workbooks
Then, try to open the Excel 2007 file in Excel 2010 and check the results again.
Best Regards,
Sally Tang
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]

Similar Messages

Errors were detected:

"Errors were detected items can not be copied "when library book is sent to Nook How do you fix this?

Are you sure your computer with ADE and your eReader are registered/authorized with the same AdobeID?
You cannot copy at all if the computer is 'authorized without ID'.
Whoops, you mentioned you hadn't had the problem before, sorry ...
Are other books still copying properly?
If not, ADE might have got its registration/activation confused and in a semi-authorized state.
Try completely removing any authorization using ctrl-shift-D to ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your Adobe ID.
If so, maybe the book as particularly restrictive DRM.
Check the info on the book (ctrl-I to ADE while the book is in focus)

My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

See Empty/corrupt iTunes library after upgrade/crash.
tt2

Safari is not opening some webpage showing the error: /usr/local/cache/files/block.html;400

Hi
safari is not opening some webpage showing the error: /usr/local/cache/files/block.html;400
Please help me.
thanks

Hey blissfull71,
If you are having issues loading certain webpages in Safar, you may find the information and troubleshooting steps outlined in the following article helpful:
Safari 6/7 (Mavericks): If Safari can’t open a website
Cheers,
- Brenden

Error while opening Excel report using servlet

Hi
I am using a servlet to open an excel report which has multiple sheets . But there is a weird problem when i try to open an excel report with two sheets having the same name .
Generally when an excel with same sheet names is opened with Microsoft excel , it will open the excel file with a dialog showing error .
But when i am trying to open through a servlet after that open/save dialog box comes , its sending two requests and that too the second one from another browser . How i am saying that its sending from another browser is , during the second time its not passing the session checks which i placed .....I mean the session for the request doesn't have any data while it was expected to have some data which i placed in Session while logging in .
Can any one let me know why this is happening ?/

Refer Note:280376.1 on MetaLink. Hope this will help you resolve the issue.
Thanks
Shail

Error while opening excel report

Hi,
While opening the excel report i am getting the below error.
REP-51026: No output for job 8923
Note: We have deployed the report in 10g Oracle Reports server present in a UNIX m/c.
Please let me know what i have to do.
Thanks & Regards,
Sudhaharan.
Message was edited by:
jsudhaharan

Refer Note:280376.1 on MetaLink. Hope this will help you resolve the issue.
Thanks
Shail

"the importer reported a generic error" on a psd file i have been using all day.

have been editing all day on a 3 minute video for a client, then all of a sudden, a PSD file with several layers for my graphics went off line... nothing else.. just the psd file.
tried to ReLink but all I get is this
"the importer reported a generic error"
I have tried resaving the project as something else and still it wont relink.

Resave psd file in Photoshop to another name and re-import.
Replace the psd on the timeline.
See if that will work.

Opening Crystal Reports get Communication Error.....

I have several issues....
When I select reports I am coming up with a communications error.
I recieve the following event id's but I am unable to find out what they meen.
34200
35602
34400
35302
My investigation leads me to believe it is an issue with the Registry or the Registry Key.
Can anyone let me know what these event id's mean?
It is on our customer web site where they are using on demand reports. it is running off of Java.
Version 10.0.0.5335

Have you installed the 1.1, 2.0 and 3.5 Framework?
Check your C:\Windows\Microsoft.NET\Framework and verify you have them all. If not go to Microsoft's site and install them.
Thank you
Don

Reports 9i - Printing Error on older version files

I run a report made in Reports 3.0. When opened in 9i it runs on screen correctly but I can't print the results. Plus, when running the option for HTML the reults is a blank screen in the browser. Should I convert it first to 6i? Error message is next:
REP-0069: Internal Error
REP-57054: In-process job terminated: Terminated with error:
REP-50125: Caught exception: exception oracle.reports.RWException {
oracle.reports.RWError[]erroChain={struct oracle.reports.RWError {
int errorCode=50125,
java.lang.String errorString="Caught exception: java.lang.NumberFormatException:", java.lang.String moduleName="REP"
Please advice.
Thank you,
Mauricio Imana

I would try converting first to 6i. If you still see the same behaviour then you should follow up with Oracle Support, since this looks like a bug.
Regards,
Danny

HT1923 I have iTunes installed on a PC running Windows 7. When I downloaded an iTunes update, iTunes wouldn't open, and diplayed a "system error" message: MSVC80.dll file missing. Does this indicate a Windows 7 problem? Is it fixable?

Unable to open iTunes on PC running Windows 7. Error message: MSVC80.dll missing. ITunes had been working normally until I downloaded an update, and the error message appeared.

Hello bhillblom,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M.

Crystal report 9 memory error.

we are using crystal report 9 with sybase power builder..... at some client locations we are experiencing the application crash due to memory while opening crystal reports.
the following errors were noticed
1.the instruction at "0x77124804" referenced memory at "0x001b3e60". the memory could not be read.
2.the instruction at "0x7c911daf" referenced memory at "0x00000000". the memory could not be read.
please guide us what is the issue.. do we need any hotfix or service pack for this.
regards

I assume you already tried to reinstall the application and I would recommend to do it one more time, but this time follow the process for so-called manual uninstall
1. Uninstall Crystal reports 9 using add remove programs
2. Save backup -up of the Registry
3. Remove the following registry key (be careful with the registry file):
HKEY_CURRENT_USER\Software\Business Objects\Suite 12.0\Crystal Reports
4. Reinstall Crystal Reports 9
As the next step I would check and disable Data Execution Prevention.
Go to: Start> Right-click My Computer" select Properties> Advanced tab > click Performance settings> Data Execution Prevention tab.
If DEP turned on for all programs, then add Crystal Reports (crw32.exe) to except list.
If DEP is not cause of problems, then I would suggest Process Monitor to locate the reason or at least try to locate it.
You can download Process Monitor utility from the following page:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
The same page will tell you how to use it. I would suggest the following steps:
Close all unnecessary applications/processes
1. Open Crystal Reports
2. Start the Process Monitor, stop capturing events (Cntrl-E), clean the display (Cntrl-X), add the following filter (Cntrl-L) "Process Name is crw32.exe then include", click ok.
3. Start capturing events (Cntrl-E)
4. Immediately click Format menu on Crystal Reports
5. Stop capturing events and save the log file
Now you can look at the log file to see what is going wrong. I would also advice to capture the same log on client machine to compare the sequence of events.
Gracias...!!

Error while opening the report or sheet in the desktop

While opening the reports it gives error as " Failed to Connect Database".
In Some reports it gives error as "Unable to Load EUL item".
Then we check the Menu bar, Tool ----> Options --->EUL.
We found, it is giving Default EUL as blank.
Now it is not allowed to open any sheet as well as not allowed to create new report.
Can any one tell how to resolve this problem?

Hi,
I am having the same issue. I am not able to import Crystal Report.
the error is "No matching records found 'Queries' (OUQR) (ODBC -2028) [Message 131-183]"
I have previewed the report using Preview external crystal report option and is running perfect.
please guide ASAP.
Regards
Sonil

Can't open excel error message -1712

can't open excel comes up with error message -1712

As Ms Office is not an Apple product, I strongly recommend asking in the Microsoft Office:Mac forums here:
Office for Mac forums
Everyone there is a Mac user AND an Office user, something you can't say about Apple's forums. I think you will find them more than helpful.

Report Generation Toolkit Error

I have an application that generates multiple excel spreadsheets each containing a table and four graphs. This has been working fine for three months but I am now getting error when generating the reports. The source of the error is in the Excel_create_workbook as indicated on the attached picture. I am passing in a template name for my excel reports. The error code (-2147352571) states a type mismatch. The file path to my template is a constant so I can't see how sometimes I get a type mismatch and other times I don't.
Any help on this would be greatly appreciated.
Thank you,
AJL
Attachments:
create_Workbook error.JPG ‏269 KB

Thanks for the reply, however, this VI is part of the Report Generation Toolkit so I don't want to have to modified NI's code if possible. I did try your suggestion without saving the VI and I still got the same error.
Any other ideas?
BTW - I encountered this problem first in an executable but have since seen the error in the development code.
Does anyone know if there is a limit to how many times you can create an excel document from LabVIEW? I wouldn't think so but the error seems to happen if I try to create several (more then five usually) documents at a time.
Thanks in advance
AJL

Have Macbook Pro & 4th gen iPod Touch. Downloaded & installed iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says "iTunes" Data too new to be used with this version of iTunes.

Have a Macbook Pro and a 4th gen iPod Touch. Downloaded and install iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says --The file "iTunes Library" cannot be read because it was created by a newer version of iTunes--. I am running iTunes 10.1. I searched for Updates to my MacBook Pro (running 10.6.7), but comes back saying no updates available. WHAT IS GOING ON??

Is your computer still authorized in the Store menu in iTunes?
iTunes Store: About authorization and deauthorization
When I changed to my new MacBookPro I had to authorize it although I used TimeMachine to transfer my settings and data.
Did you try to deselect Wi-Fi syncing and enable it again after that?
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
Did you already transfer your purchases and manually started a backup?

Opening Excel Report results in 'Errors were detected in File .....'

Similar Messages

Maybe you are looking for