Opening FCP Project in Express?

I purchased FCE 4.0 today, as I have a FCP 6 project that I wanted to edit. There is nothing more technical done that FCE can't handle.
But I get an error that "The file format is too new for this version of the application", and "This project is unreadable or may be too new for this version of Final Cut."
So I guess I'm asking is there a workaround? Or will there be an update that will support this?

Gotcha. Makes sense that it's that way. Big price/feature difference.
I do have it in .mov from FCP, so I figured that I'd add it to a new project and just start splicing from there.
Thanks for the confirmation

Similar Messages

Opening FCP project causes error

Just got a new macbook and FCP Express, when I try to open project from the desktop by clicking on the project file FCP keeps posting file not found messages, if I open from within the program that's going OPEN then finding the file all is okay and it opens the project, anyone know what this is all about. It never happened on older versions that I used to use.

So what version do you have?
How is the external hard drive formatted?
Have you set the external's permissions to "ignore ownership".
x

Can't open fcp project file - fcp not responding

starts to open project but gets to 23% and freezes fcp...project is being stored on a lacie 250gig protable hd with firewire. never had this issue after tons of work. tried going to a autosave version but tried several and they freeze up fcp
any ideas short of moving all the media to another drive and starting a new project (I was just about to start cutting this project today).

Welcome to the forum!
Post the version of FCP you're running.
Try opening a new project file, then importing the captured clips into it... might fix this... If you trash your preferences for FCP found in the user/library/preferences/FCP User data folder, you can just click on the application and it won't try to open the last project file.
Can you open earlier project files OK?
Jerry

Can't open FCP project

Hi everyone
I encountered a problem with my FCP project and I'm not sure how to fix it.
The current workflow is like this - A project is started on FCP 4.5 and later on brought to FCP 5 for final master to BetaSP. (Reason for doing this is becoz we can only master straight to BetaSP on da FCP 5 suite)
This workflow worked for the previous 4 projects.. but it failed with the current one. The project will open till about 90% and then FCP5 will suddenly quit. The project opens fine on FCP 4.5.
Any ideas on what I can do to save this project?
Thanks for the help!
Zee~

one thing you can try is to open the main project in 4.5
duplicate the playout sequence you need to playout
then create a new project and move the duplicated sequence into it
save and close
then try and open the new project in FCP5 and see if that works for you
if thats a no go, then unmount your media drive
then try again to open the the project in FCP5
if it opens then remount the media drive and reconnect the sequence to the media

Opening FCP project on another Mac.

I made a project using FCP 5.1. on my 24' intel iMac, i did a media manage and moved the project file and all the files to an external hard drive. Now im trying to open the project up on a Mac pro G5, which had FCP 5.0 but i updated it to 5.1, but when i attempt to open the project file i get a "General Error (41)" message. What is happening, why won't it open?

Try opening FCP first and then open up the project directly from FCP's OPEN menu.
CaptM

Opening FCP Project; Superdrive goes crazy

Hi There
I've been FCP user for 4 years and I really love it as an editing suite, but there is few little problems that really frustrates me.
I've just noticed lately on my MacBook Pro, when opening up a FCP project if I have a DVD / CD in the drive, it starts goiing crazy.
It sounds as if the project is trying to find missing material on the DVD, which in turn makes the motor start churning.
Not only is it an unpleasent sound but it takes forever to open my project.
So far my only solution is to take the DVD out.
If anyone knows of why this is happening, if I can do anything to fix it or is having the same problem please let me know
Thanks alot
BluHawk

That's the solution. Don't leave a disc in the drive unless you're planning on using it.

Open FCP projects in FCE?

I have Final Cut Pro 4.5 that I have been running for a few years now on an eMac G4. I just purchased a new iMac and after installing all of my software, I find I cannot run FCP 4.5 on the new Mac due to graphics card incompatibility.
So I just spent $1300 on a new computer and was hoping I could hold off on major software upgrades until next year seeing as how FCP 4.5 was no small investment in itself. Plus I bought my iMac a month and a half before Leopard came out so I just spent another $130 on that.
My question is: If I purchase Final Cut Express, can I open my FCP 4.5 project files in FCExpress? I am primarily an animator (After Effects, Cinema 4D) so the video editing I do is pretty basic. None of my projects use LiveType or any other FCP 'side-programs.'
Would FCExpress be an economical option to save my FCP4.5 project files or am I screwed?
And why doesn't Apple sell a stand-alone FCP (with possibly Compressor)?
Thanks for any help...

I had the same error running an old version of FCE on an Intel iMac because it said I needed an AGP graphics card. This worked for me:
1. Right click on the Final Cut Pro icon (in finder) and select "Show Package Contents".
2. Open the "Contents" folder and double click the "info .plist". It should open automatically in TextEdit - if it doesn't, choose TextEdit manually.
3. Around 15 or so lines down you will see AGP. Delete it and put in PCI.
4. Close the window and when asked if you want to save the changes, say yes.
I hope that works for you. I was very happy when I found this solution.
Information courtesy of http://www.furrygoat.com/2006/03/finalcut_express_on_intelmac.html

Need to open .fcp project from FCP7 in FCPX 10.0.3. How can I achieve this without exporting the original from FCP7 to a QT movie? I need the original timeline in FCPX.

I have been working on a scholarship short film for a couple of months now (am a senior in high school) and have been using my school's Mac Pros with OSX 10.7 and FCP7 to edit it. Yesterday I bought a Macbook Pro and got FCPX, and am having trouble moving everything over (the computers at school are going to be wiped for the end of the year soon and I must continue to edit it on my MacBook). The project file "MattsShort.fcp" from FCP7 at school isn't even being recognized as a project file by the newest version of FCPX, so obviously I cannot open it and get to work connecting the media. How can I open this file in FCPX? Excluding exporting the project at school to a quicktime movie, I need to be able to further edit the timeline.

Cool, thanks! I was able to import the timeline into FCPX but all of the files are offline, even though I imported the same exact clips that were in the original FCP7 project, into the same 'event' that I have the new FCPX timeline in. I believe the problem lies in that FCPX imported the clips and named them after the date and time they were created, rather than the "Clip #XXX" that FCP7 assigned to the timeline. Does this sound correct? And if so, is the only way to solve this problem to go back to FCP7 and rename all of the clips assigned to the timeline to the names FCPX gave them? I really hope there is a simpler solution but given all of the work it takes to even import a FCP7 project into FCPX, I wouldn't be surprised if that was the only solution.
A little more info: When I use 7toX to convert the XML file, it says that my media will be offline.
EDIT: I just watched a youtube video that explained that 7toX brings over the required media.....why isn't it doing that for me? I am on two different computers if I hadn't already said.
Message was edited by: MattMadoni

General error when opening FCP project file

Hi, I have searched on the forums and found similar questions, but no solution yet.
I created a project about a month ago (FCP 5.0.4) and now I need to make some additions but every time I open the file (or all of the 20 autosaved files) I get a general error message. I tried moving the media files to another folder, but I still get the general error message. I have the project file on my local drive and the scratch disk is a My Book drive (I forgot to reformat the drive so it is still Fat32). I have removed the preferences and ran disk first aid already.
All of my other projects I can open just fine.
Any suggestions? I need to add about 2 more minutes to the project which is already 18min. It took me a week to edit and I really don't want to re-edit everything.
I am using FCP 5.0.4 on a PB G4 1.5Ghz

I don't quite understand - did you move your project files to a FAT 32 formatted HD?
If so, they're probably cooked . . . (as in wrecked)
Check to see if they're .fcp and if not, try changing one to that, then try to open it.
Search this forum for something like FAT 32 or Mac OS Extended - you may glean more accurate info from that.
Andy
G5 Quad 8GB. 250, 500 GB HDs. G-Raid 1TB. FCP 5.1.1. Shake 4.1. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Error 41 When Opening FCP Project

Hai Guise,
came home from college with my final cut pro project file and the rest of the scratch files via my ext HD, plugged it in, tried opening and i got final cut pro error message 41, im guessing its something to do with the version, i tried download the most recent version of the apple website and it says i have it so i guess maybe the college's one is out-of-date?
i have tried trashing prefs too
any suggestions?

So what version do you have?
How is the external hard drive formatted?
Have you set the external's permissions to "ignore ownership".
x

Problem opening FCP project in latest version 6.0.5

I get the project may be too new for this version of FCP warning. I have the latest upgrade. I originally worked on it on my MBP running TIGER and saved it on a Mac Pro that is on Leopard could that be an issue? Any work around to this? I really need to access my file.

Does this help?
http://www.larryjordan.biz/articles/fcp602.html

Open and work on FCP project file located at xsan volume

It is recommended by apple to *open and work on FCP project file located at xsan volume*
or we should open , work and save our FCP project file from local drive only .
Is there is risk of corrupting xsan volume if we open FCP project file placed in xsan volume .
where should be the location of FCP project files ??????
Mac pro 2.66 , FCP 6.01, xsan 1.4

Opening a file twice is a indeed a problem. To prevent this, and for numerous other reasons, we use Open Directory. In OD you can configure that a user can login just once (concurrently).
In old versions of xsan it was not recommended to put project files on xsan, but nowadays it works fine.
Putting projectfiles on a san has the advantage that a user can work on any client. If this is not important in your environment these files can be stored locally.

Importing a FCP project into FCE?

I'll try to import a FCP 7.0.2 project based on DVCPRO50 mediafiles.... into FCE 4.0.1. It will not open (of course), but is it because of not supporting the codec, or is it generally not possible to open a Pro project in Express (dependent on the material)...?!?
Any tips or tricks? Can the FCP project be saved or converted in a way that FCE will read?

Unfortunately you can't open FCP project files in FCE, only the other way around. Even if the codec was supported (which it's not), it wouldn't be possible.
If you need to edit in FCE you could always export from FCP as a Quicktime Movie in a codec that FCE does support: namely DV-NTSC or AIC.

Best Method For Importing Clips Between FCP Projects

What is the best method for importing clips between FCP 7.0.3 projects? I am wondering whether or not pulling the clips from the Capture Scratch folder is the way to go or will using Import from the new FCP project create a new folder in Capture Scratch with the imported clips? I have a new HD camcorder with different clips for different projects and Log and Transfer makes it so easy to bring them all in at once but now wondering how best to separate them into separate Capture Scratch folders for each project.

well, I simply either drag them in to the new/different project from the finder, or drag or copy and paste between open fcp projects. Never had any problems working this way. Just remember that if you delete a specific project scratch disk folder, you may be deleting media used in another project.

Help : can't open fcp studio pro 2 file in fcp express 4.1.

can't open fcp studio pro 2 (fcp)file in fcp express. just installed fcp express 4 hd upgrade. everything works fine but i was given a fcp file of a sequence created on fcp pro studio 2. when try to open it i get an error message that says "this project is unreadable or may be too new for this version of final cut" - i updated all final cut express software. help!!

That's correct. FCP projects cannot be opened in FCE.

Opening FCP Project in Express?

Similar Messages

Maybe you are looking for