Opening Flash EXE with passed Lang Parameter

I want to open a Flash Projector EXE with a variable passed to it in a command line (Lang - language code variable).
CS5 AS2 ( ?? Player 10.3)
Any ideas or examples
Thanks

I would first of all try to get the FLA from the Flash
Designer first. It
will save you alot of headache.
If all fails then read this
http://www.flashjester.com/?section=faq&cPath=50#328
Regards
FlashJester Support Team
e. - [email protected]
w. -
http://www.flashjester.com
There is a very fine line between "hobby" and
"mental illness."

Similar Messages

When I open FF it asks me EVERY time which file I want to open firefox.exe with. When I choose FF, it opens a savefile prompt and opens a blank web browser.

When it opens and I choose FF to open .exe with, it won't let me click the box that says use this program from now on.
Also it doesn't matter if I save the file or not, it asks every time.
Then when the screen opens, it is a blank browser. I just click on my bookmarks to get me started, but I've tried setting up my home page, it won't start up there though.
I've already tried a new shortcut, but the program file does this too.
I tried updating my version of FF, it's not helping this problem either.
I also found an article about a web page fixer program that is supposed to help with the box checking that says always use this program, but it hasn't helped either.

My solution to my original problem of stopping FF from intruding with an erstwhile search doesn't work. Firefox IGNORES my settings to NOT check for updates to addons (letalone disabled and unwanted addons). It continues to check when I reopen FF. What a PITA>
Further, it gives me no solution. Just takes more than a minute of my time waiting for it to stop.
grr

Flash exe with transparent background

Hi,
   Is there a way to project an EXE with transparent background from flash (only using flash).
If not only flash,
      then what else should I use??
As I know there are softwares like NorthCode, Zinc, etc., But all of them affects the script in some way like "fscommand("quit");, loadMovie();" does not seem working.
What I exactly need is:
1) Flash projector (EXE as well as APP) with transparent background
2) I need to loadMovie (call exteranl swfs) into the main projector file.
      "note:The external swfs are FlashPaper files, so I should I have access to API, so that I could resize them, edit UI as I want."
Thanks in Advance.
Vinod Kumar.K.V

from "Render and export a composition as an FLV or F4V file":
"To include the alpha channel in the FLV output, use the On2 VP6 codec and select Encode Alpha Channel in the Video tab of the export settings dialog box."

Help opening Flash Presentaion with .exe extension

I need help opening a flash presentation that was created for
my business. I has a .exe extension. It was created as an cd
business card. I want to host this presentation on my website, but
my site does not allow me to upload .exe files. How do I change
this to a different file type. It will not open in flash 8. Any
help?

I would first of all try to get the FLA from the Flash
Designer first. It
will save you alot of headache.
If all fails then read this
http://www.flashjester.com/?section=faq&cPath=50#328
Regards
FlashJester Support Team
e. - [email protected]
w. -
http://www.flashjester.com
There is a very fine line between "hobby" and
"mental illness."

How to open URL IView with dynamic url parameter (navigate_absolute)

Hi Experts,
i would like to open an URL-IView from the WebDynpro ABAP Application in the Enterprise Portal 7.0
and i want to set the URL parameter dynamically. Is this possible and how can i achieve this!!
Thx Markus

Hi Markus,
You can take help of the following code snippet.
Here we are calling an Iview using absolute navigation and passing URL parameters as well
* Select the input value entered and then pass it to REM INQ application---------
DATA lv_inputbusobjid   TYPE          wd_this->Element_context-inputbusobjid.
DATA lv_path            TYPE          string.
DATA lv_tab_wd_param     TYPE          wdy_key_value_list.
DATA lv_str_wd_param     TYPE          wdy_key_value.
DATA lo_el_context      TYPE REF TO   if_wd_context_element.
DATA api_component      TYPE REF TO   if_wd_component.
DATA window_manager     TYPE REF TO   if_wd_window_manager.
DATA window             TYPE REF TO   if_wd_window.
DATA lo_api_component   TYPE REF TO   if_wd_component.
DATA lo_portal_manager TYPE REF TO   if_wd_portal_integration.
* read the imput data first-------------
* get element via lead selection
lo_el_context = wd_context->get_element( ).
* get single attribute
lo_el_context->get_attribute(
    EXPORTING
      name = `INPUTBUSOBJID`
    IMPORTING
      value = lv_inputbusobjid ).
** call remuneration inquiry window using absolute navigation
CLEAR lv_tab_wd_param.
* Adding parameters
lv_str_wd_param-key = 'sap-wd-configId'.
lv_str_wd_param-value = 'CACS_REMINQ_CONF'.
APPEND lv_str_wd_param TO lv_tab_wd_param.
lv_str_wd_param-key = 'BUSOBJ_ID'.
lv_str_wd_param-value = lv_inputbusobjid.
APPEND lv_str_wd_param TO lv_tab_wd_param.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_portal_manager = lo_api_component->get_portal_manager( ).
if lo_portal_manager is BOUND.
* PCD
lv_path = 'ROLES://portal_content/com.sap.pct/specialist/com.sap.pct.erp.common.workset_reuse/com.sap.pct.erp.icmparticip.bp_folder/com.sap.pct.erp.icmparticip.15.bp_folder/com.sap.pct.erp.icmparticip.15.pages/com.sap.pct.erp.icmparticip.RemInquiry'.
lo_portal_manager->navigate_absolute(
    navigation_target   = lv_path
    navigation_mode     = if_wd_portal_integration=>co_show_external
    window_features     = 'toolbar=no,resizable=yes,scrollbars=yes'
    business_parameters = lv_tab_wd_param
endif.
Hope this helps
Regards
Manas Dua

Flash.exe form

Is it possible to create a form in a flash.exe with it
connecting to a database through PHP?

Yes
Regards
FlashJester Support Team
e. - [email protected]
w. - www.flashjester.com
"This has been one of the most impressive and thoroughly
pleasant
experiences of customer support I have ever come across -
astounding!"
Director - hedgeapple

Open Doc URL with parameter in BI 4.0 to open Webi and Crystal report

Hi Experts ,
Has any one experienced the open doc URL to open the report and to pass the parameter to the new report .
I am well aware of the syntax of passing the parameter and use to work perfectly fine with XI 3.1 but its giving me griefs in BI 4.0 environment .
In the new report i am just trying to pass the Fiscal year as a parameter with the url i can open the report but it does not accept the value being passed with the url so i have to renter the values again .
I am using BO 4.0 SP2 Patch 6 and trying to intact with crystal and webi report built on top of BEx query with the fiscal year parameter defined in BEx query level .
Any comment on this will be appreciated.
Thanks,
Vibhav

Hi Nakul,
I am not using the user response to get the value i tested it in Crystal Enterprise environment i tired passing the following syntax
http://.../OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=...&lsSFiscal%Year%(Single%Value%Entry,%Required)={?0P_FYEAR}
{?0P_FYEAR} this is a variable comming form BEx query into Crystal i tired to use it and pass it to other report but i cannot pass it i have tried to pass the hardcoded value still i see the paramater screen and have to enter the value again.
I am not sure if anyone has tested this functionality in BI 4.0 environment .
Thanks,
Vibhav

Open a crystal report from WAD with passing the variables values

Hi,
I need to know is there any way to link SAP WAD to crystal reports (open a crystal report from WAD)and pass the values of the variables which are entered in the Web App. (e.g. Customer id,year) should be passed to the Crystal Report.
Maybe we need to pass parameter by WAD URL but this is just my assumption and have no idea how to do this with passing variable values.
right now I know the method of how Bex queries which are used as data source for crystal reports but in my current scenario we have the structure like this that bex queries link with WAD and then WAD is linked with crystal reports.
No doubt that Crystal report is target option in RRI but there the source is Bex Query only but in current scenario we are looking WAD (web template) as a source to crystal report or crystal report called in WAD.
Please suggest something on same.
Thanks
Take care
Vishal sharma

Hello Vishal.
Did you find a solution for this problem?
I'm facing right now the same problem, I need a way to link SAP WAD to crystal reports (open a crystal report from WAD) and pass the values of the variables which are entered in the Web App. (e.g. Customer id,year) should be passed to the Crystal Report.
Have found an answer to this issue? If yes, please kindly inform how have you solved this.
Best Regars
Armando Santos

I can't open PDF files with adobe flash player

I have installed it and whenever I try to open pdf files it says I need to agree with your liscens and you do that automatically when you download it. I have followed all your instructions on your website and uninstalled it and installed again, but I can't open pdf files with it. I don't know what the problem is exactly, but it's really frustrating..

Flash Player CANNOT open PDFs because they AREN'T Flash Documents.
Adobe Reader opens PDFs.
To accept the license agreement (NOT the one you accepted to download or install - the one for USE)
Windows:
Go to: C/Program Files(x86)/Adobe/Reader 11.0/Reader and double click the eula.exe file. The license agreement will open for you to accept.
Mac:
Go to: Mac HD/Applications and double click the Reader app. The license agreement will open THE FIRST TIME you open it.

Paging problem while opening new window with getURL from presentation fullscreen exe

Can any one please help me out from this,
I have the flash presentation exe with some pdf links when I
click on the pdf link it will come at the top for a first time and
send it back to my exe presentation. after every click on the pdf
link each browser open behind my presentation the user can't
recognized the page is open or not I want the page should open
above my fullscreen presentation at every time i click on the pdf
or any other link please tell me how i can solve this
I am using Flash8 Professional version. please help me out.

Hi,
You can do this by using our tools.
Jugglor
http://www.jugglor.com
JStart
http://jstart.flashjester.com
read this
http://www.flashjester.com/index.php?section=faq&cPath=14_56_26#268
Please download the example file to see if working
then read
http://www.flashjester.com/index.php?section=faq&cPath=14_56_26#296
That shoul help you get started.
Regards
FlashJester Support Team
e. - [email protected]
w. -
http://www.flashjester.com
There is a very fine line between "hobby" and
"mental illness."

How pass a parameter with forward slash to plsql script

Hi,
I am trying pass a parameter to plsql script from command line using sqlplus, and the parameter is a file directory and has '/'. Seems the system couldn't recognize the value.
here is my code in DECLARE:
l_FileDir VARCHAR2(200) := &&FileDir ;
I pass value '/usr/tmp' (with the single quote in the string)
Can someone tell me how I do it?
Thanks,
Kate
Edited by: user12100435 on Feb 25, 2010 8:31 AM

user12100435 wrote:
I think you are right. The issue is not file-separator character issue. because the exact same script run in another envoironment. And it's not file directory or permission issue because if I use hardcoded value, the code works fine.
The error message is invalid File directory.
Here is the related part of the code.
-- open file handler
IF UTL_FILE.IS_OPEN(l_FileHandler) THEN
UTL_FILE.FCLOSE(l_FileHandler);
ELSE
l_FileHandler := UTL_FILE.FOPEN ( location => l_FileDir,
filename => l_FileName,
open_mode => 'W',
max_linesize => 32767 );
END IF;Ok, based on your input so far, I have cooked up a simple testcase.
Make sure you are doing something similar to this -
test@XE>
test@XE> -- show the contents of the anonymous PL/SQL script
test@XE> -- You are probably passing two parameters - the file location and the file name
test@XE> --
test@XE> ! cat test5.sql
DECLARE
l_FileHandler UTL_FILE.FILE_TYPE;
l_FileDir     VARCHAR2(200) := '&1' ;
l_FileName    VARCHAR2(200) := '&2' ;
BEGIN
-- open file handler
IF UTL_FILE.IS_OPEN(l_FileHandler) THEN
    UTL_FILE.FCLOSE(l_FileHandler);
ELSE
    l_FileHandler := UTL_FILE.FOPEN ( location => l_FileDir,
                                      filename => l_FileName,
                                      open_mode => 'W',
                                      max_linesize => 32767 );
    UTL_FILE.PUT_LINE(file => l_FileHandler, buffer => 'Hello, World!');
    UTL_FILE.FCLOSE(file => l_FileHandler);
END IF;
END;
test@XE>
test@XE> -- execute it
test@XE> @test5.sql '/usr/tmp' 'first.txt'
old   3:   l_FileDir     VARCHAR2(200) := '&1' ;
new   3:   l_FileDir     VARCHAR2(200) := '/usr/tmp' ;
old   4:   l_FileName    VARCHAR2(200) := '&2' ;
new   4:   l_FileName    VARCHAR2(200) := 'first.txt' ;
DECLARE
ERROR at line 1:
ORA-29280: invalid directory path
ORA-06512: at "SYS.UTL_FILE", line 33
ORA-06512: at "SYS.UTL_FILE", line 436
ORA-06512: at line 10
test@XE>
test@XE> -- Create a directory object that points to "/usr/tmp"
test@XE> create directory log_dir as '/usr/tmp';
Directory created.
test@XE>
test@XE> -- now invoke the script
test@XE> -- Note - I pass the value "LOG_DIR" in uppercase. That's the name of my directory object.
test@XE> --
test@XE> @test5.sql 'LOG_DIR' 'first.txt'
old   3:   l_FileDir     VARCHAR2(200) := '&1' ;
new   3:   l_FileDir     VARCHAR2(200) := 'LOG_DIR' ;
old   4:   l_FileName    VARCHAR2(200) := '&2' ;
new   4:   l_FileName    VARCHAR2(200) := 'first.txt' ;
PL/SQL procedure successfully completed.
test@XE>
test@XE> -- Since my Oracle client is on the same machine as the Oracle server, I can check
test@XE> -- this file "/usr/tmp/first.txt" quite easily
test@XE>
test@XE> ! cat /usr/tmp/first.txt
Hello, World!
test@XE>
test@XE> isotope

Passing a parameter to an Excel file when opening it

I would like to know if it is possible to pass a parameter to an Excel file when calling that file from within another Excel file using VBA. I am using the 2007 version. An example of what I would like to do is what we use to do with DOS programs and command
line parameters. I would like to have the Excel file I just opened do something depending on the parameter passed to it and then close.
Might be an easy question but I'm stumped. Any ideas?

Step.1 Create a macro-enabled workbook
Step.2 Open the workbook, and open the VBA, insert a moudle, copy and paste the following code sample in the module
Option Base 0
Option Explicit
Declare Function GetCommandLine Lib "kernel32" Alias "GetCommandLineW" () As Long
Declare Function lstrlenW Lib "kernel32" (ByVal lpString As Long) As Long
Declare Sub CopyMemory Lib "kernel32" Alias "RtlMoveMemory" (MyDest As Any, MySource As Any, ByVal MySize As Long)
Function CmdToSTr(Cmd As Long) As String
Dim Buffer() As Byte
Dim StrLen As Long
If Cmd Then
StrLen = lstrlenW(Cmd) * 2
If StrLen Then
ReDim Buffer(0 To (StrLen - 1)) As Byte
CopyMemory Buffer(0), ByVal Cmd, StrLen
CmdToSTr = Buffer
End If
End If
End Function
Step.4 Copy and paste the following code sample into ThisWorkbook
Private Sub Workbook_Open()
Dim CmdRaw As Long
Dim CmdLine As String
Dim myParam As String
CmdRaw = GetCommandLine
CmdLine = CmdToSTr(CmdRaw)
myParam = Right(CmdLine, 6)
MsgBox myParam
End Sub
Step.4 Sign your code or modify the macro security settings to allow the macro to run automatically
Step.5 Save and close the workbook
Step.6 Run command line with the parameter, for example:
Excel "Server\ShareFolder\TheWorkbook.xlsm" /e/myParam
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The code sample above will pass the last 6 characters (modify the code if you need more or less) to the workbook
The workbook will display a message box to display the parameter we passed from the command line, add the other function as you need
The code sample refers to the reply from Air_Cooled_Nut in
http://www.vbforums.com/showthread.php?366559-Excel-How-to-Pass-Command-Line-Parameter-DKenny-is-KING!
Max Meng
TechNet Community Support
A new Office has arrived, try it now.
A beautiful Start. It begins here. Windows 8 and Windows RT.
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Passing command line parameters to flash .EXE (AS2)

Hi,
I currently have a bunch of Flash clips in .swf that get variables passed from Javascript on a remotely hosted web server. They need those variables to work.
I'm trying to create a local version using those same Flash clips, compiled into .EXEs instead of .SWF files so people who do not have flash installed can run them as well.
I'm trying to write a loader application that will take care of logging people in to their web accounts and launching the flash .EXEs. But I need to pass the EXEs the same variables I used to pass them via javascript. Is there a command line way to pass variables into the flash .EXE so they are useable with AS2 (via _root or otherwise...)?
I haven't been able to find an answer anywhere...
Thanks,
Imperio

Hi Yves,
I tried what you mentioned
Here's what I have added to the ANT file:
<fx:application id="Hello">
</fx:application>
<fx:jvmuserarg name="-Dhelloproperty=" value="32"/>
Here's what I added in registry inder:
HKEY_CURRENT_USER\Software\JavaSoft\Prefs\Hello\/J/V/M/User/Options
value name = '-/Dhelloproperty='
value data ='abcd'
The value from the registry never gets printed.
This is what I get when I print the value via sysout (so registry value is not used)
-Dhelloproperty=32
-Dapp.preferences.id=Hello
Here`s the method to print the params:
private static void runtimeParameters() {
          RuntimeMXBean bean = ManagementFactory.getRuntimeMXBean();
          List<String> aList = bean.getInputArguments();
          for (String s:aList) {
            System.out.println( s );
Can you please provide me with your example if possible.
My OS is Win 7 Pro 32 bits, what`s yours?
Thanks,
Carl

Pass Arguments to EXE with Powershell

I haven't done much with this cmdlet, but Start-Process seems like it should be able to do what you want with it's -ArgumentList parameter. So something like this may work:
PowershellGet-Content C:\File.txt | foreach { Start-Process myexe.exe -ArgumentList $_ }Using you example of myexe.exe -hostname testserver, each line of the text file would look something like this.
Text-hostname testserver

So I have an EXE that needs some arguments an examble is myexe.exe - hostname testserver.
I want to have a powershell script that can look at a text file and pass the results as parameters to the exe.
So the text document would look like this :
Hostname = Server 12
So I'm hoping the - hostname argument it can be passed to the exe with a result of server 12.
In the end I want to have something a end user can fill out and have the results used as parameters for some exe files.
Thanks!
This topic first appeared in the Spiceworks Community

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

Opening Flash EXE with passed Lang Parameter

Similar Messages

Maybe you are looking for