Opening from"Open Recent" does not show any files.  Help!

Every time I start IBA the splash screen shows up the templates available.  At the bottom of the screen there is an option to "open recent" files.  The same at the "file" menu on the top menu bar.  I see no file records in either one.  I always have to use the simple "open" command and search for the files, where they are stored.  This is rather annoying as I would prefer to be able to open from "recent" as you are supposed to be able to do.  Please, give me some advice if I need to change something in the settings (I could not find any preferences allowing me to do this either.)

It might be best to contact Apple for support so they can make sure you don't remove something otherwise important
[email protected]
…support phone number call +1 (877) 206-2092.

Similar Messages

  • HT203433 I am having trouble moving my music to my new computer. I have enable homeshare. it does not show any files in my homeshare. How do i get them out of the normal files into home share

    I am having trouble moving my music to my new computer. I have enable homeshare. it does not show any files in my homeshare. How do i get them out of the normal files into home share

    Welcome to the Apple Community.
    The following article(s) may help you.
    Moving your iTunes library to a new computer

  • When saving new bookmarks selecting chooose does not show any files

    in firefox 3.6.6 when saving new bookmarks the choose option does not show any files.
    have tried disabling extensions but no effect

    Try http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

  • When I open an image in Photoshop from Lightroom it does not show any adjustments, without restarting photoshop between each picture.

    I am using Macbook Pro, Photoshop CC, and Lightroom 5.
    The problem is: When I start edit in photoshop from Lightroom, the adjustment in Lightroom does not showing up in Photoshop. This has never been happen before while using Photoshop 6.
    I have tried to reinstall the products several times, including OS Yosemite. But it does not help.

    The problem with write permissions for the OneDrive folder only shows up in Lightroom 6's export dialogue, that's why it's to irritating. Lightroom 5.7.1 is not having that problem nor does the file explorer. The problem also exists on both of my machines. I will try to check for other problems with the OneDrive troubleshooter though: Running the OneDrive troubleshooter - Windows Help   

  • External Drive Does not show any file in finder

    I do not see any file in my external hard drive. It a 2TB hard drive and in info it shows 727 GB remaining. I am sure files are there but for some reason they are not showing in finder. I am using iMac 10.6.8

    How does this relate to iPhoto?  You'd best ask your question in the Show Leopard forum as it's more a system/hardware issue.
    OT

  • After installing OS X Yosemite my USB drive is not working as it was. It does not show any files in USB drive.

    After I installed the latest OS X Yosemite my USB drive is not loading any files or folders which is located in it. Sometime it just show a blank window and sometime it shows folders and files but not clickable.

    I have same problem but didn't find solution… If I put USB drive no files shown on finder… But If I use ForkLift files are showing but only in Forklift…
    Need some clue how to fix it...

  • Firefox downloads but does not install on my Win7 64 bit laptop and does not show any files in the software list of programs installed.

    I have installed and uninstalled several times with no success. I had a previous version installed in April 10 but it will not reinstall or run. This problem started about a month ago, in early July.

    moirl wrote:
    5.  I can not get anything off the Blackberry (photos etc.).
    As was stated above:
    1. Go to Options >> Media Card (or Memory)
    (some themes or BlackBerrys may call this "Settings >> Media Card")
    2. Check the following settings (if they are not listed this way, then change to reflect the following:
    a) Media Card Support: On
    b) Mass Storage Mode Support: On
    c) Auto Enable Mass Storage: Yes
    3. Save the settings and exit
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Open/Save Dialog does not show new files?

    Say you are working on a logic file in a folder and you have
    a few audio and movie files in that folder, and you launch
    Logic and via the open/save dialog window you add a few
    files to your song and in that dialog window you can see
    all the files in that folder.
    Then, in the Finder you add a few more files and movies to
    that folder and again use the open/save dialog window to
    add more files BUT the new files you added since launching
    logic are NOT SHOWN in the dialog window ! ?
    What's the deal with that?
    Every other app can show files added since the launch of the
    application, why not Logic?
    PowerBook G4 1GHz   Mac OS X (10.3.9)  

    project manager
    um, yeah.
    Should not need the project manager simply to see new files added to a directory in a Open/Save dialog window since last opening the app.
    I did a scan, a extended scan, opened all the little turn down arrows of the
    full path to the directory I knew there to be the new files and yes, Logic
    shows them there in the "Project manager".
    BUT Logic still does not show the files in the Open/Save dialog windows.
    This is strange because even simple app like TextEdit can show
    new files in it's Open/Save dialog function windows without the need of
    a project manager.
    I have to quit and re-launch each time to see any new files?

  • Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL..

    Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Trying to upgrade from OS9 to 10.2.3, get as far as "select a Destination"  the installation stalls and does not show any destination disks

    I have a Power Mac G4, it has OS 9.  Imam trying to upgrade to OS 10.2.3 (Jaguar).  It is going smoothly until I get to the "Select Destination"  screen.  It stalls there and does not show any disks to choose from.
    Any ideas?
    Thanks. Abe Oliver

    Hello Abe,
    If it's a Digital Audio or earlier, you need to install a Firmware update first...
    As explained in "Mac OS X 10.2 Welcome and Install Manuals" and "Mac OS X Welcome and Install Manuals", you may need to update the firmware on your Macintosh computer prior to installing Mac OS X 10.2 or later. The following table lists the firmware updates that are available for Apple products that can update to Mac OS X 10.2 or later.
    http://support.apple.com/kb/HT1395?viewlocale=en_US
    Power Mac G4
    Firmware Update
    Download Document No.
    Power Mac G4 (Mirrored Drive Doors 2003)
    no update needed
    Power Mac G4 (FW 800)
    no update needed
    Power Mac G4 (Mirrored Drive Doors)
    no update needed
    Power Mac G4 (QuickSilver 2002)
    no update needed
    Power Mac G4 (QuickSilver)
    no update needed
    Power Mac G4 (Digital Audio)
    Power Mac G4 Firmware Update 4.2.8
    120068
    Power Mac G4 (Gigabit Ethernet)
    Power Mac G4 Firmware Update 4.2.8
    120068
    Power Mac G4 (AGP Graphics)
    Power Mac G4 Firmware Update 4.2.8
    120068
    Power Mac G4 (PCI Graphics)
    no update needed
    Power Mac G4 Cube
    Power Mac G4 Cube Firmware Update 4.1.9
    75129

  • I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

    I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

    Mac 101: File Sharing
    Mac OS X 10.7 Help: Transfer files between two Mac computers
    Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
    Mac OS X 10.7 Help: Use iDisk to share files
    Mac OS X: Sharing your files with non-Apple computers
    How to share a Mac's files with a PC and vice versa.

  • HT1338 I am still with 10.5.8 and my macbook does not show any software updates, i am willing to pay for a new software if it is needed, because i can't connect mi iPhone 5S or iPad mini to iTunes. PLEASE HELP!!!!!

    How do i update 10.5.8 if my macbook does not show any software updates?

    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • IPhoto 9 does not show any photo of old Mac Mini's iPhoto 7 library

    I'm trying to migrate an 80GB iPhoto library from my old Mac Mini to a new iMac. The old Mac Mini has iPhoto version 7. The new iMac iPhoto 9.
    When I copied the complete library, iPhoto does not show any photos. How can I fix this? I already tried:
    Using iPhoto Library Upgrader – however it shows: Your library can open with the current version of iPhoto and does not need to be prepared with this tool.
    Using iPhoto's rebuilding etc functions on both Macs – this does not do the trick
    Using iPhoto Library Manager – also shows 0 photo and rebuilding does not work.
    Anybody knows a solution?
    Thanks!

    Doesn't work :
    It is also quite strange that iPhoto just opens the library without any warnings, but without showing any of the content (photos, albums, etc.)

  • Site Window does not show any item

    Hi,
    My site window does not show any items/folders to modify after I open my site.  I was wondering if there is anyone who can point out what I did wrong.  Usually the site window shows all the contents as soon as the site is opened.  Please help.  Thank you.
    coskinas

    If you look inside the webcontent folder, in Finder view (or Explorer???? if you're using Windows) - anyway, are there in fact files in there?
    Try Site > Update > Refresh all.
    If that doesn't work, try making a new site from existing content, which should give you a new site file (call it something slightly different) sitting beside your old one. I'm guessing here, but it can't hurt.

  • GRC AC 10- ARA Risk violation does not show any thing

    Hi Expert,
    GRC AC 10.0 SP14
    Steps to reproduce error
    Reports and Analytic -> Risk violations. The dialog opens up but does not show any thing. Please see the attachment for your information
    We have installed Abode flash player already.
    Any suggestion will be of great help.
    Thanks,
    Kailsh

    Hi Kailash,
    Does this issue occur with other dashboard reports too or only with risk violations?
    Also, can you check if the batch risk analysis has been successfully completed?
    Thanks
    Sammukh

Maybe you are looking for