Opening GB3 archived file with GB2...any work-arounds?

I'm collaborating with a friend. Turns out their archived GB session was done in GB3 and I have GB2. Are there any workarounds? On my server I can see the whole archive as folders and files. My first thought was to simply download the individual .aif tracks and sync them back up in a new GB2 session. I assume all I get to start with, then, are completely dry tracks.
[just did this...but of course they used software instruments, too...can't get that stuff]
Are there any other ideas?
Message was edited by: dgls

Which security software (firewall, anti-virus) do you have?
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.

Similar Messages

Can Illustrator CS4 open Illustrator CS6 files? or other work around way to open CS6 files?

Can Illustrator CS4 open files created in CS6? or can CS6 files be converted to be opened in CS4? like CS6 InDesign can be saved in IDML files to be opened in previous versions. Or if there is any other work around ways, like save CS6 files in PDFs/eps/... so the files can be opened in CS4 and work from there. Thank you.

Open in CS6 , file >> Save As >> Version >> CS4.

An attempt to open a pdf file with Photoshop Elements (version 12) resulted in a pop generated by the Photoshop Editor stated "Impossible to execute this operation (opening file) because one of the specified colour is not managed". Is there any mean to ad

An attempt to open a pdf file with Photoshop Elements (version 12) resulted in a pop generated by the Photoshop Editor stated "Impossible to execute this operation (opening file) because one of the specified colour is not managed". Is there any mean to adapt the file to make its reading possible?
Did somebody get the same problem?

It is a high order probability that your SQL's report generator is creating the PDF, not Acrobat (which by design and EULA cannot be used in as/with server).
That the report generator outputs to an old-old version of PDF bears this out.
Wiki articles on PDF are very nice for those high level intro summaries.
To know / understand PDF you purchase and study the ISO Standard for PDF (ISO 32000-1:2008).
Rather than "PDF validation" you may want to consider addressing the appearent root cause of the problem(s).
You can change the email2fax application to one that can deal with older PDF versions.
You can change the report generator to one that can output to the ISO Standard.
(Perhaps the in-use application can be configured to output to the current version of PDF (i.e., the ISO Standard).
Be well...

Having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

Hi George ,
Is it happening with all the PDF' or any specific one?
Could you please share the error message so that we can replicate at our end ?
Try repairing reader once and see if that fixes the issue.
Launch Reader>Navigate to Help>Repair Adobe Reader Installation
Regards
Sukrit Dhingra

Any FM or other ways to open the Excel file with data

Please provide some Help, where I need to open the excel File with some static data (header data) from the Selection screen application Toolbar on clicking the button
Thanks
Ravindra

Hi here is good example.
Satish
Reads an existing Idoc and dispays the contents in a spreadsheet format
REPORT Z_DISPLAY_IDOC_AND_DATA line-size 275.
This tool reads an existing Idoc and dispays the contents in a       *
spreadsheet format. The spreadsheet (MS-EXCEL) will be automatically *
created if D_EXCEL = 'X'.                                            *
data: idoc_control like EDIDC,
      NUMBER_OF_DATA_RECORDS like sy-dbcnt,
      NUMBER_OF_STATUS_RECORDS like sy-dbcnt,
      INT_EDIDS like edids occurs 0 with header line,
      INT_EDIDD like edidd occurs 0 with header line.
TYPE-POOLS : LEDID.
data: STRUCT_TYPE TYPE LEDID_STRUCT_TYPE ,
      IDOC_STRUCT TYPE LEDID_T_IDOC_STRUCT,
      SEGMENTS TYPE LEDID_T_SEGMENT,
      SEGMENT_STRUCT TYPE LEDID_T_SEGMENT_STRUCT,
      excel_tab(2000) occurs 0 with header line.
parameter: DOCNUM like edidc-docnum obligatory, ""Idoc Number
           sap_rel like SY-SAPRL default SY-SAPRL obligatory,
           pi_ver like EDI_VERREC-VERSION default '3' obligatory,
           d_excel as checkbox default 'X'. ""Download ?
start-of-selection.
perform read_idoc.
perform process_idoc.
if d_excel = 'X'.
    perform download_to_excel.
endif.
end-of-selection.
FORM read_idoc.
CALL FUNCTION 'IDOC_READ_COMPLETELY'
       EXPORTING
            DOCUMENT_NUMBER          = docnum
       IMPORTING
            IDOC_CONTROL             = idoc_control
            NUMBER_OF_DATA_RECORDS   = NUMBER_OF_DATA_RECORDS
            NUMBER_OF_STATUS_RECORDS = NUMBER_OF_STATUS_RECORDS
       TABLES
            INT_EDIDS                = INT_EDIDS
            INT_EDIDD                = INT_EDIDD
       EXCEPTIONS
            DOCUMENT_NOT_EXIST       = 1
            DOCUMENT_NUMBER_INVALID = 2
            OTHERS                   = 3.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "" read_idoc
FORM process_idoc.
perform read_idoc_structure.
perform display_data_records.
ENDFORM.                    "" process_idoc
FORM display_data_records.
data: PE_seg_HEADER like EDI_SAPI01,
        segname like EDI_IAPI12-SEGMENTTYP,
        prev_segname like EDI_IAPI12-SEGMENTTYP value ' ',
        pt_fields2 like EDI_IAPI12 occurs 0 with header line,
        PT_FVALUES2 like EDI_IAPI14 occurs 0 with header line,
        byte_first type i,
        byte_last type i,
        field_val(50),
        tmp_str(15),
        tmp_str3(15),
        seg_repeats type i value 0,
        tmp_str2(15),
        tab_cr(1) type x value '09',
        tot_ctr type i value 0,
        ctr type i value 0,
        msg(40) type c.
data: IDOC_STRUCT_wa TYPE LEDID_IDOC_STRUCT.
sort int_edidd by segnum.
describe table int_edidd lines tot_ctr.
loop at int_edidd.
    move int_edidd-segnam to segname.
    clear msg.
    concatenate 'Reading segment ' segname
                into msg separated by space.
    if tot_ctr <> 0.
      ctr = ( 100 * sy-tabix ) / tot_ctr.
    endif.
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              PERCENTAGE = ctr
              TEXT       = msg.
    add 1 to seg_repeats.
    clear tmp_str2.
    if int_edidd-segnam <> prev_segname.
      seg_repeats = 1.
      clear: pe_seg_header, pt_fields2, pt_fvalues2.
      refresh: pt_fields2, pt_fvalues2.
      CALL FUNCTION 'SEGMENT_READ_COMPLETE'
           EXPORTING
                PI_SEGTYP                 = segname
                PI_RELEASE                = sap_rel
                PI_VERSION                = pi_ver
           IMPORTING
                PE_HEADER                 = pe_seg_header
           TABLES
                PT_FIELDS                 = pt_fields2
                PT_FVALUES                = pt_fvalues2
           EXCEPTIONS
                SEGMENT_UNKNOWN           = 1
                SEGMENT_STRUCTURE_UNKNOWN = 2
                OTHERS                    = 3.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      prev_segname = int_edidd-segnam.
    endif.
    read table idoc_struct into idoc_struct_wa with key
                           segment_type = int_edidd-segnam.
    if sy-subrc = 0.
      IF IDOC_STRUCT_WA-SYNTAX_ATTRIB-MUSTFL = 'X'.
        TMP_STR = 'Mandatory'.                  ""Mandatory
      ELSE.
        TMP_STR = 'Optional'.                  ""Optional
      ENDIF.
      if IDOC_STRUCT_wa-SEGMENT_TYPE_ATTRIB-QUALIFIER = 'X'.
        tmp_str3 = 'Qualified'.
      else.
        tmp_str3 = 'Non-Qualified'.
      endif.
      shift IDOC_STRUCT_wa-SYNTAX_ATTRIB-OCCMAX
                                 left deleting leading '0'.
      move seg_repeats to tmp_str2.
      condense: IDOC_STRUCT_wa-SYNTAX_ATTRIB-OCCMAX, tmp_str2.
      concatenate tmp_str2 'of' IDOC_STRUCT_wa-SYNTAX_ATTRIB-OCCMAX
          into tmp_str2 separated by space.
      write :/ IDOC_STRUCT_wa-SEGMENT_TYPE,
           tmp_str,
           TMP_STR3,
           tmp_str2,
           IDOC_STRUCT_wa-SYNTAX_ATTRIB-HLEVEL,
           IDOC_STRUCT_wa-SEGMENT_TYPE_ATTRIB-plast,
           IDOC_STRUCT_wa-SEGMENT_TYPE_ATTRIB-DESCRP.
      if d_excel = 'X'.
        concatenate 'Segment Name' tab_cr
                    'Mand / Opt ' tab_cr
                    'Qual / non-Qual' tab_cr
                    'Seq of Max' tab_cr
                    'Level' tab_cr
                    'Owner' tab_cr
                    'Description'
                    into excel_tab.
        append excel_tab.
        concatenate IDOC_STRUCT_wa-SEGMENT_TYPE tab_cr
              tmp_str tab_cr
              TMP_STR3 tab_cr
              tmp_str2 tab_cr
              IDOC_STRUCT_wa-SYNTAX_ATTRIB-HLEVEL tab_cr
              IDOC_STRUCT_wa-SEGMENT_TYPE_ATTRIB-plast tab_cr
              IDOC_STRUCT_wa-SEGMENT_TYPE_ATTRIB-DESCRP
              into excel_tab.
        append excel_tab.
        concatenate tab_cr
                    'Field Nma' tab_cr
                    'Type' tab_cr
                    'Length' tab_cr
                    'Byte From' tab_cr
                    'Byte To' tab_cr
                    'Description' tab_cr
                    'Value' tab_cr
                    'Qualifier Meaning'
                    into excel_tab.
        append excel_tab.
      endif.
    endif.
    sort pt_fields2 by field_pos.
    byte_first = 0.
    loop at pt_fields2.
      clear: field_val.
      byte_last = pt_fields2-EXTLEN.
      write int_edidd-sdata+byte_first(byte_last) to
            field_val left-justified.
      shift pt_fields2-EXTLEN left deleting leading '0'.
      shift pt_fields2-byte_first left deleting leading '0'.
      shift pt_fields2-byte_last left deleting leading '0'.
      write:/ '   ', pt_fields2-fieldname,
              pt_fields2-datatype,
              pt_fields2-EXTLEN,
              pt_fields2-byte_first ,
              pt_fields2-byte_last,
              pt_fields2-descrp,
              field_val.
      read table pt_fvalues2 with key fieldname = pt_fields2-fieldname
                    fldvalue_l = field_val.
      add byte_last to byte_first.
      if sy-subrc = 0.
        write : pt_fvalues2-descrp.
      else.
        clear pt_fvalues2-descrp.
      endif.
      if d_excel = 'X'.
        concatenate tab_cr pt_fields2-fieldname tab_cr
                pt_fields2-datatype tab_cr
                pt_fields2-EXTLEN tab_cr
                pt_fields2-byte_first tab_cr
                pt_fields2-byte_last tab_cr
                pt_fields2-descrp tab_cr
                field_val tab_cr
                pt_fvalues2-descrp
                into excel_tab.
        append excel_tab.
      endif.
    endloop.
endloop.
ENDFORM.                    "" display_data_records
FORM read_idoc_structure.
data: idoctype type LEDID_IDOCTYPE.
if not idoc_control-cimtyp is initial.
    STRUCT_TYPE = 'E'. ""Extended
    idoctype = idoc_control-cimtyp.
else.
    STRUCT_TYPE = 'B'. ""Basic
    idoctype = idoc_control-idoctp.
endif.
CALL FUNCTION 'IDOC_TYPE_COMPLETE_READ'
       EXPORTING
            RELEASE              = sap_rel
            STRUCT_TYPE          = STRUCT_TYPE
            IDOCTYPE             = idoctype
            VERSION              = pi_ver
      IMPORTING
           IDOC_TYPE            = idoctype
       TABLES
            IDOC_STRUCT          = idoc_struct
            SEGMENTS             = segments
            SEGMENT_STRUCT       = segment_struct
       EXCEPTIONS
            IDOCTYPE_UNKNOWN     = 1
            IDOCSTRUCT_UNKNOWN   = 2
            SEGMENT_DATA_MISSING = 3
            ILLEGAL_STRUCT_TYPE = 4
            OTHERS               = 5.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "" read_idoc_structure
FORM download_to_excel.
data: name like RLGRAP-FILENAME.
shift docnum left deleting leading '0'.
concatenate docnum '-' idoc_control-idoctp '.xls'
              into name.
CALL FUNCTION 'RH_START_EXCEL_WITH_DATA'
   EXPORTING
     DATA_NAME                 = name
     DATA_TYPE                 = 'ASC'
     WAIT                      = ' '
   TABLES
     DATA_TAB                  = excel_tab
   EXCEPTIONS
     NO_BATCH                  = 1
     EXCEL_NOT_INSTALLED       = 2
     WRONG_VERSION             = 3
     INTERNAL_ERROR            = 4
     INVALID_TYPE              = 5
     CANCELLED                 = 6
     DOWNLOAD_ERROR            = 7
     OTHERS                    = 8
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "" download_to_excel

How to open a DWG file with AutoCAD options (AppleScript)?

Hi,
I'm looking for help specifying the AutoCAD options when opening DWG files. I have DWG files of floor plans that I always want to open at the same scale.
I can successfully open a DWG file with the default options using:
open POSIX file "/Users/crmckinnon/Desktop/cabin_floor_plan.dwg" as alias without dialogs
But I don't want the default options, so if I try to specify them:
open POSIX file "/Users/crmckinnon/Desktop/cabin_floor_plan.dwg" as alias with options {class:AutoCAD options, scale unit:"autocad inches"} without dialogs
I get a "Can't find alias" error. How do I specify the AutoCAD options? I'm sure this is due to my lack of understanding of AppleScript. Any help would be appreciated!
Thanks,
Chris

I'll answer my own question. Here's how I specified the options:
open POSIX file filePath as alias with options {pGSO:original size, pASU:inches, pASR:12.0 / 0.1875} without dialogs
I had to look in the Apple Script dictionary to get the "codes" to use. The variable names didn't work. I think that's because some have "global" in the name which is a keyword in Apple Script. Here's what the codes translate to:
pGSO = "global scale options"
pASU = "scale unit"
pASR = "scale ratio"
Thanks,
Chris

Archiving files with errors

Hi all
I have been working on a File(FCC) to File(FCC) Scenario. I am working on PI7.0 with SP12. I would like to archive all the files with errors, for which the sender file adapter shows an option Archive Faulty source files. But I am not able to archive any of the error files. Help.sap.com mentions that this functionality works when a permanent error occurs.
I have tried out with all possible combinations and I am still unable to archive the error file.
Please help!!!
Regards
Kartik

Hi,
There are two conditions that you should keep in mind while using the Archive files with errors option
1. The Processing Mode has to be Archive not Delete in case you are using the Add Time Stamp for the archived files with errors(the second check option not the first one)
2. In case the processing mode is Delete you can not use the second ADD Time Stamp option but this also can archive files with errors
Ranjit

Why I cannot open an archive file

I captured my footage using the create archive so that the fooatge would be capture st8 and does not stop on when ever I stop recording on camera.
1. since there is no log and capture is there a way I can capture my footage with the create archive and tell it where to start & Stop ???
2. Why when I captured the footage and I went to my files treid to oepn them and nothing happend.
What am I doing wrong any help please ???
Thanks

thanks Andy for the info,
yes I know I'm capturing from a sony HDV machine thru firewire.
Now I found out how to open the archive file but the clips are split. it seems there is no way to have the footage I capture as a whole I always have 10 clips or depends of the footage.
I'm capturing on a 2TB HD so there is loads of space and formated as Mac ox extended
I miss the log and capture feature that was and still is great in FCP 7 aprt from the loads of other missing features.
Hope a real update comes out soon

My illustrator CS6 crashes when i try to open an AI file with RGB color mode

My illustrator CS6 crashes when i try to open an AI file with RGB color mode. I worked on this file yesterday and changed it to RGB mode. Today i tried to open the file again but illustrator won't open it and crashes. It does work when i want to open a file with CMYK color mode.
Anyone know how to fix this ?

Have you tried trashing the prefs?

How do I make safari open a pdf file with acrobat x instead of reader

I would like a pdf file from a link in Safari to open the linked file with adobe acrobat x rather than either adobe reader of the safari version. Where can I set the preference to get this done?

Aha! The properties for the plugin file nppdf32.dll for Adobe Reader indicate the file is for Adobe Acrobat. This misidentification is then used by SeaMonkey as a label in the helper application list.
Adobe Reader 11.0.3.37: nppdf32.dll has version 11.0.3.37. This is the version in SeaMonkey's plugins folder.
Adobe Acrobat 7.0.8.218: nppdf32.dll has version 7.0.9.50.
As for having both Adobe Reader and Adobe Acrobat on the same PC, this generally works providing Reader is installed AFTER Acrobat. Reader is freeware, and I want to keep it current. Acrobat is purchaseware, and I cannot afford to keep buying upgrades or newer versions.

I can't open or save file with Java Web Start

Hi,
i can't open or save file with Java Web Start:
import java.io.*;
import java.util.*;
public class MetaDataFileCreator {
public String fileNameSpace = null;
public String fileName = null;
protected Properties file = null;
public MetaDataFileCreator(String fileNameSpace, String fileName) {
this.fileNameSpace = fileNameSpace;
this.fileName = fileName;
public void createMetaDataFile() {
try {
System.out.println("file METADATA");
ClassLoader cl = this.getClass().getClassLoader();
String nameFileMetaData = fileNameSpace + fileName + ".txt";
FileOutputStream fileOS = new FileOutputStream(cl.getResource(nameFileMetaData).getFile());
file = new Properties();
file.setProperty("aaaaa", "aaaa");
file.store(fileOS, "");
fileOS.close();
} catch (Exception e) {
System.out.println("Error writing metadata-file: " + e);
System.exit(1);
e.printStackTrace();
I have try also to open a file like this:
ClassLoader cl = this.getClass().getClassLoader();
file.load(cl.getResourceAsStream(nameFile));
also like this:
try {
fos = (FileOpenService)ServiceManager.lookup("javax.jnlp.FileOpenService");
fss = (FileSaveService)ServiceManager.lookup("javax.jnlp.FileSaveService");
} catch (UnavailableServiceException e) {
fss = null;
fos = null;
System.out.println("Error with JNLP");
System.exit(1);
if (fss != null && fos != null) {
try {
// get a FileContents object to work with from the
// FileOpenService
FileContents fc = fos.openFileDialog(null, null);
//FileContents newfc2 = fss.saveAsFileDialog(null, null, fc);
// get the OutputStream and write the file back out
if (fc.canWrite()) {
// don't append
os = fc.getOutputStream(false);
} catch (Exception e) {
e.printStackTrace();
also like this:
File f = new File((System.getProperty("user.home")+"x.txt").toString());
FileOutputStream fileX = new FileOutputStream(f);
OutputX = new PrintWriter(new BufferedWriter(new OutputStreamWriter(fileX, "UTF8")));
OutputX.println(....
but it doesn't work with Java Web Start.
Can someone help me?
How can I open or save file?
thank you.
Sebastiano

Did you specify <all-permissions/> in your JNLP file? Did you sign your code? What error are you getting?

I can't open D7200 NEF file with Photoshop CS6. I checked the updates and there are no updates available. What do I do?

Hi,
I can't open D7200 NEF files with Photoshop CS6.I checked the updates and there are no updates available.What do I do?
Nitin

For the time being, shoot JPEG images. At this time there is no support for NEF files from the D7200 in any Adobe product. It was released at such a time that it wasn't included in the last Camera Raw update. And Lightroom hasn't been updated either. Consequently, there is no DNG converter available at this time. We will have to wait and see what programs will be able to accommodate the D7200 when Adobe releases updates or upgrades that support the camera.

How to open a ".doc" file with ms word directly with this servlet?

Here is a servlet for opening a word or a excel or a powerpoint or a pdf file,but I don't want the "file download" dialog appear,eg:when i using this servlet to open a word file,i want open the ".doc" file with ms word directly,not in IE or save.
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
public class OpenWord extends HttpServlet {
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
doPost(request,response);
public void doPost(HttpServletRequest req,HttpServletResponse res) throws ServletException, IOException {
String strFileName = req.getParameter("filename");
int len = 0;
String strFileType1 = "application/msword";
String strFileType2 = "application/vnd.ms-excel";
String strFileType3 = "application/vnd.ms-powerpoint";
String strFileType4 = "application/pdf";
String strFileType = "";
if(strFileName != null) {
     len = strFileName.length();
     if(strFileName.substring(len-3,len).equalsIgnoreCase("doc")) {
          strFileType = strFileType1;
     } else if(strFileName.substring(len-3,len).equalsIgnoreCase("xls")) {
          strFileType = strFileType2;
     } else if(strFileName.substring(len-3,len).equalsIgnoreCase("ppt")) {
          strFileType = strFileType3;
     } else if(strFileName.substring(len-3,len).equalsIgnoreCase("pdf")) {
          strFileType = strFileType4;
     } else {
          strFileType = strFileType1;
if(strFileName != null) {
     ServletOutputStream out = res.getOutputStream();
     res.setContentType(strFileType); // MIME type for word doc
//if uncomment below sentence,the "file download" dialog will appear twice.
     //res.setHeader("Content-disposition","attachment;filename="+strFileName);
     BufferedInputStream bis = null;
     BufferedOutputStream bos = null;
     String path = "d:\\"; //put a word or a excel file here,eg a.doc
     try {
     File f = new File(path.concat(strFileName));
     FileInputStream fis = new FileInputStream(f);
     bis = new BufferedInputStream(fis);
     bos = new BufferedOutputStream(out);
     byte[] buff = new byte[2048];
     int bytesRead;
     while(-1 != (bytesRead = bis.read(buff, 0, buff.length))) {
     bos.write(buff, 0, bytesRead);
     } catch(NullPointerException e) {
     System.out.println ( "NullPointerException." );
     throw e;
     } catch(FileNotFoundException e) {
     System.out.println ( "FileNotFoundException." );
     throw e;
     } catch(final IOException e) {
     System.out.println ( "IOException." );
     throw e;
     } finally {
     if (bis != null)
     bis.close();
     if (bos != null)
     bos.close();

Hello!
Does some one of you had open a MS word file (.doc) in Java search for a token like [aToken] replace it with another text and then feed it to a stream of save it?
I want to build a servlet to open a well formatted and rich on media (images) ms word document search for tokens and replace them with information form a web form.
Any Ideas?
Thank you in advanced.

How do I open an iWeb file with Texteditor?

How do I open an iWeb file with Texteditor? I want to embed a midi file but I don't see any of the iWeb files under my document folder. Where are they and how do I open them in Texteditor? Thanks!

first you have to publish the site. If you publish to idisk you can find the html files there and edit them there. If you publish to a folder find the file within that folder.
you can use textedit, but check the help files to make sure you configured it properly for html.
be aware you would have to edit the html file each time you republish the edited page.
good luck

You already have a schema opened on this file with another name: abc

I am trying to create a model for an XML file, when I clicked on "Objects to Reverse" checkbox under "Selective Reverse" tab, I am getting the following error:
java.sql.SQLException: You already have a schema opened on this file with another name: abc
I have created a Data Server in Topology whose schema and workschema are "abc" and logicla schema is "Labc".
Where is the mistake going in?

That is because you can only connect to a file in read/write mode once at a time. When you connect to a file without specifying ro=true (e.g. Read Only=true) in the URL, the file is locked and you can’t connect to the file from another instance until the original connection is dropped. I assume since you are trying to connect to the file multiple times that you mean to connect in readonly mode. To do this, like I mentioned earlier, simply add ro=true to your URL and you should be all set. Note: you may need o restart your JVM for chnges to take effect. Let me know if that works.

Opening GB3 archived file with GB2...any work-arounds?

Similar Messages

Maybe you are looking for