Opening Installation File In Applications

Hi All,
I'm having great difficulty oopening a game I have downloaded. I have gone onto the Second Life website to download the game onto my apple mac OS X Panther. It has downloaded successfully and gives the instructions to move the SL icon into my applications folder (which I have done). When I open this from the applications folder to install, in the bottom toolbar it flashes up for abou 1 second but then disappears again. So it's not fully completeing the download and installing it onto my computer. Please help if yu can.
Thanks
Gareth xxx

You're Welcome Gaz!
...purchase an external hard drive to obtain more memory..."
No. An external HD, has nothing to do with RAM/Memory
Again,
How do you connect to the Internet?
You need to install the 10.3.9 Combo Update.
You must add more RAM.
I think you have an Apple iBook G4/1.33 14-Inch (Late 2004).
Is that correct?
If so, this is the type of RAM that you need, although it can be purchased elsewhere. This is just an example.
And here are some Preliminary Instruction Guide.
There should be details instructions in your iBook User's Manual.
ali b

Similar Messages

When I open Contacts file in Applications a dialog box states "All Contacts (no cards)"

When I open Contacts file in Applications a dialog box states "All Contacts (no cards)" My contacts are still located on the computer because I can still send emails as the contacts address is show as soon as I start to enter the name.
Therefore I am unabled to view the full contacts listing.
How do I restore this list?

Hello Barney-15E
I was not aware of the existance of Previous Recipients.
However I have only added my contacts via the Contacts v Card.
I have selected all contacts and clicked "Add to Contacts" All now restored to original location.
Thanks Barney-15E for your prompt response.

Open documents/files from Application Server in forms 6i

Hello All,
Our requirement is to open files that are in Application server( We do not want to upload them into database).
Is there a way to open this files from forms 6i.
I am wondering how the "View Output" or View log button works on the concurrent program submission form. Its the doing the same thing i.e pulling the file from Application server and showing up.
Please let me know if anyone has any ideas on how to get this done.
Thanks
Sunil

I assume you are using Forms 6i in web mode here. Then it is just a URL to the file if you properly map to a directory where you store the files:
web.show_document('http://...../myfile.pdf');
But it also looks like you are using Oracle Apps, so might want to ask it in the e-Business Suite.

How to Open a file in Application Server

Hi All,
I am having a recquirement that I had to read the data from an Application Server file, I want to know whether any function modules are there to open a file that is in the Application server.
Thankx In advance,
Sri.

Hi,
If you are on windows, the solution is to create a shared directory anf give access rights to your sapservice <SID> user.
It's not really logical to put files on app servers because one app server can stopped without stopping the system.
So we decided to put all our shared directories on the Central Instance server.
Regards,
Olivier

Could not open the file in application server

Hi All,
I have a Zreport which will write files on application server. When I tried to download it is showing me "Could not open the file". And when checked again with /nal11 the files does not exist. When I ran the Zreport again the file exist in application server but unable to download. And when checked again the file doesnot exist. Why it is getting archived? Please help me.
Thanks,
Venkata

Hi Sagar,
Below is my file path : /dv2/tmp/instl/salesdata.txt
When I checked in the below path the file exists.
/dv2/tmp/archive/salesdata.txt
Solved the issue.
Thanks,
Venkata

Unable to open a file in Application server

This path exist in the Application server.
        DR1/interfaces/Esker
ORDHIST - This is the File name in whihc i need to save the data.
I had specified the whole path as DR1/interfaces/Esker/ORDHIST
I am trying to upload the data from the Internal table to the above specified file ORDHIST.
It is not opening the File on the application server, it says that it 'could not open file'.
Any suggestions will be apprecaited to open the file and transfer the data from
Final Internal table to --> Application server
Below is my code....If found any mistakes then plz correct me...
*&      Form UPLOAD_APPLSERVER
*       text
* --> p1        text
* <-- p2        text
FORM UPLOAD_APPLSERVER .
DATA : GV_OUTPUT(275) TYPE C.
DATA : P_FILE TYPE STRING.
P_FILE = 'DR1/interfaces/Esker/ORDHIST'.
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC <> 0.
    MESSAGE : I002(ZMSSG) WITH 'Could not open file'.
    STOP.
ENDIF.
LOOP AT T_FINAL1 INTO WA_FINAL1.
CONCATENATE WA_FINAL1-VBUND
              WA_FINAL1-BSTNK
              WA_FINAL1-KUNNR
              WA_FINAL1-AUDAT
              INTO GV_OUTPUT
              SEPARATED BY ','.
TRANSFER GV_OUTPUT TO P_FILE.
IF SY-SUBRC <> 0 .
     MESSAGE : I003(ZMSSG) WITH 'Trasnfer is failed'.
     STOP.
ENDIF.
ENDLOOP.
CLOSE DATASET P_FILE.
ENDFORM.                    " UPLOAD_APPLSERVER
Thanks & Regards,
Krishna

Hello Kittu,
What was the Sy-Subrc value after executing the Open Dataset statement?
If it is 8, then the problem could be with
1) The path name not mentioned properly (or)
2) User Id might not be having access to the file mentioned in the path
Also, if you are using the App Server as UNIX then the filenames should be of case sensitive.
Check the path first and note it down as per the actual case
Hope this is helpful
Thanks,
Babu Kilari
Edited by: Babu Kilari on Apr 6, 2009 6:18 AM

Open Sharepoint File Launches application to Open Dialog

We are experiencing the following behavior on one machine in our group. The environment is SharePoint Online 2013, with libraries synchronized to the user PC. User PC is Windows 8.1 with Office 2013.
When you double-click a SharePoint file to open it, it launches the appropriate Office program, but it launches to the "Open" dialog (open local file, use a template, etc.)
If you close the program (Word, Excel, Visio, etc.) and double-click the file again to open it, it typically opens properly. On some occasions, it behaves as described above again.
Once the file is successfully opened, it opens properly from there forward.
When the file is actually opening, the splash screen indicates it is "downloading" the file, and there is a delay. The file is actually synchronized and has a local copy.
If you open a true local copy of any MS file format (not in a synchronized folder), the files open properly.
I suspect this is an issue with the office document cache or something, but I find no fix for this behavior.

try these links:
http://sharepoint.stackexchange.com/questions/122609/open-a-link-of-excel-with-the-dialog-popup-window-in-quick-launch-sharepoint-201
http://blog.sharedove.com/adisjugo/index.php/2012/09/29/open-sharepoint-files-in-edit-mode-from-client-applications-and-not-read-only/
Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

Opening a file in Application Server

Hi Friends,
I have a file 'abc' in application server, and i don't know the extension of it . while trying to open it using OPEN DATASET   statement, it fails because of no extension.
I have tried using 'abc.*' in the open dataset   statement but it doesnt work....so is there any function module or is there any other way to open and read it.........

>
Shylaja t wrote:
> I have a file 'abc' in application server, and i don't know the extension of it . while trying to open it using OPEN DATASET   statement, it fails because of no extension.
Its totally wrong to say OPEN DATASET statement failed because of no extension of the file! Actually, the ABAP run-time does not care whether the file has an extension or not. In most cases, the app server (file system) datasets/files are stored without any extension.
Here's how to approach your issue:
1. Read the Keyword Documentation of OPEN DATASET
2. Check the Sy-Subrc after OPEN DATASET statement and if its unequal to 0;
        a. Check the file name/path you are passing is correct
        b. Check you are using OPEN DATASET for READ
        c. Depending you are in a Unicode/Non-Unicode system, check the file is not already open
        d. Make sure the file you are trying to open physically exists in the app server!
Once you are able to OPEN the file then use READ DATASET command to read it.
Hope this helps.
Cheers,
Sougata.

Unable to open excel file through application created by application builder

Hello,
I've created an application for my program using application builder, but the built application is not able to open the required excel file as it was being opened in original program.
Please help.

Please post your code. We cannot do anything to help you if you do not. There are too many things that could be wrong for us to try and guess what you are doing. Also please tell us which version of LV you are using and which version of the toolkit. This is important because there have been a lot of changes to the toolkits here in the last couple of years.
Joe.
"NOTHING IS EVER EASY"

How do I open old files without application extensions on them?

I have lots of 1995 or so files written from a mac on 3.5 diskets most of which I have read onto disk.
But they have no extensions and I can't seem to open them.
If I had to guess I would say they are canvas, possibly powerpoint but using powerpoint 98and canvas 7 I can"t seem to open them.
I have a G3 powerbook. a G3 tower both running OS9, a powerPC macmini running OS10 and OS9 in emulation, a PC portable running System10 and another PC portable running XP.
What are my options short of seppuku?
I need to get these files to teach a course.
Thanks

When I use OS 9 and previous Mac systems I use CanOpener for problems such as you present. It is still available too.
http://www.abbottsys.com/co.html
Use CanOpener to get into just about any file.
Powerful Mac data recovery software. Our famous universal file opener lets you read any file -- and extract what you need including text, icons, PICS and more. It's perfect for browsing all types of files, including old files, foreign files and files your Mac can't open, and it's indispensable for recovering text from damaged files - a lifesaver!
Plus, CanOpener lets you view virus infected files without launching the virus. So you can safely check suspect files and recover text from them - a powerful way to avoid virus infections!
CanOpener has special text filters that let you...
*Extract Names, Phone Numbers, URLs, Email, Web and IP Addresses.
*Strip HTML Coding. Remove extra Carriage Returns and blank spaces from email and Web text.
*Extract important sentences such as questions or anything containing $'s and numbers.
*Rapidly find clean text in files that contain huge amounts of 'garbage'
CanOpener Extractor.
Now you are not limited to opening files individually. You can drag and drop any file, or a folder full of files, to do bulk extraction using any of the special text extraction filters! A fantastic time saver!

Can I prevent Mac OS X Lion from opening previous files when applications are launched?

Since upgrading to Lion each time I click on a file (and the program opens) in addition to the file I clicked on also the most recent file I had open in that program opens also. Is there any way to prevent this action?

Uncheck:

Cannot open .CHM file when Application is running in Service Mode.

Hello All,
I have a compiled HTML help file (.CHM) that i am trying to
integrate with my VB 6.0 project.
I am using RH_ShowHelp function (which uses htmlhelp()) to
launch the Help File.
All is fine when i run my program in Application Mode.
But, when i install my app in Service Mode, (running under
SYSTEM account) - it does not work.
I have tried to use ShellExecute API as well, and that does
not work either.
Does anyone have any suggestions on how to get this working
from services mode?
Is there some other function call or parameters needed...
Any input is appreciated.
Thanks
G

Software executed as a service is usually running as a
background task and
is usually executed not by the current logged-in user but by
a special
default "user" named "System". There are a number of
advantages to having
software run as a service... it can run continuously no
matter who's logged
into the system or even if the system is locked.
Mike
"Captiv8r" <[email protected]> wrote in
message
news:es2ku9$5u3$[email protected]..
> Hi G and welcome to our community
>
> Ummm, really showing my ignorance here. What, ummm,
exactly IS this
"SYSTEM"
> account you are talking about? Is this a Vista thing or
what?
>
> Cheers... Rick
(Who proudly purchases "For Dummies" books!)
>

Help!! Cannot run installer files

Hi,
I seem to be having a problem running installer files. Once I double click on to run a file, i get an error message saying that there is no default application to run the document ..
I am trying to install Safari, and iWork
Any ideas anyone?

The default application to open installer files is Installer, located in /Application/Utilities. There is a bug where it sometimes vanishes. If this has happened to you, you'll need to reinstall it. To do so, use Pacifist to retrieve it from your original system installer disks.

How to Read file from Application in DMZ Server (page on DMZ)

Hi All,
i am trying open a file from application server from OAF page on DMZ server .
i am getting the error 'either not supported file type or file is damaged '.
i am taking the path of production server to read the file from DMZ server .
Please let me know what is the issue .
Thanks
Raju

Please post the details of the application release, database version and OS.
i am trying open a file from application server from OAF page on DMZ server .Is the issue with all OAF pages or with specific ones only?
i am getting the error 'either not supported file type or file is damaged '.Please check Apache log files for details about the error (error_log* and access_log*).
i am taking the path of production server to read the file from DMZ server .What type of DMZ configuration you have?
Thanks,
Hussein

How to download file from application server

Hi Experts,
              I developed report and execute in background mode. for this i used Open dataset transfer and close dataset . i got the requried output . But in this case user want downloaded file on presentation server so can anyone tell me How to download file from application server?
i know it is possible through Tcode CG3Y. but i want code in program.

This code will download a file to your Client package by package, so it will also work for huge files.
*& Report ZBI_DOWNLOAD_APPSERVER_FILE
REPORT zbi_download_appserver_file.
PARAMETERS: lv_as_fn TYPE sapb-sappfad
DEFAULT '/usr/sap/WBP/DVEBMGS00/work/ZBSPL_R01.CSV'.
PARAMETERS: lv_cl_fn TYPE string
DEFAULT 'C:\Users\atsvioli\Desktop\Budget Backups\ZBSPL_R01.CSV'.
START-OF-SELECTION.
CONSTANTS blocksize TYPE i VALUE 524287.
CONSTANTS packagesize TYPE i VALUE 8.
TYPES ty_datablock(blocksize) TYPE x.
DATA lv_fil TYPE epsf-epsfilnam.
DATA lv_dir TYPE epsf-epsdirnam.
DATA ls_data TYPE ty_datablock.
DATA lt_data TYPE STANDARD TABLE OF ty_datablock.
DATA lv_block_len TYPE i.
DATA lv_package_len TYPE i.
DATA lv_subrc TYPE sy-subrc.
DATA lv_msgv1 LIKE sy-msgv1.
DATA lv_processed_so_far TYPE p.
DATA lv_append TYPE c.
DATA lv_status TYPE string.
DATA lv_filesize TYPE p.
DATA lv_percent TYPE i.
"Determine size
SPLIT lv_as_fn AT '/' INTO lv_dir lv_fil.
CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
    EXPORTING
      file_name      = lv_fil
      dir_name       = lv_dir
    IMPORTING
      file_size_long = lv_filesize.
"Open the file on application server
OPEN DATASET lv_as_fn FOR INPUT IN BINARY MODE MESSAGE lv_msgv1.
IF sy-subrc <> 0.
    MESSAGE e048(cms) WITH lv_as_fn lv_msgv1 RAISING file_read_error.
    EXIT.
ENDIF.
lv_processed_so_far = 0.
DO.
    REFRESH lt_data.
    lv_package_len = 0.
    DO packagesize TIMES.
      CLEAR ls_data.
      CLEAR lv_block_len.
      READ DATASET lv_as_fn INTO ls_data MAXIMUM LENGTH blocksize LENGTH lv_block_len.
      lv_subrc = sy-subrc.
      IF lv_block_len > 0.
        lv_package_len = lv_package_len + lv_block_len.
        APPEND ls_data TO lt_data.
      ENDIF.
      "End of file
      IF lv_subrc <> 0.
        EXIT.
      ENDIF.
    ENDDO.
    IF lv_package_len > 0.
      "Put file to client
      IF lv_processed_so_far = 0.
        lv_append = ' '.
      ELSE.
        lv_append = 'X'.
      ENDIF.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          bin_filesize         = lv_package_len
          filename             = lv_cl_fn
          filetype             = 'BIN'
          append               = lv_append
          show_transfer_status = abap_false
        TABLES
          data_tab             = lt_data.
      lv_processed_so_far = lv_processed_so_far + lv_package_len.
      "Status display
      lv_percent = lv_processed_so_far * 100 / lv_filesize.
      lv_status = |{ lv_percent }% - { lv_processed_so_far } bytes downloaded of { lv_filesize }|.
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
        EXPORTING          "percentage = lv_percent - will make it fash
          text = lv_status.
    ENDIF.
    "End of file
    IF lv_subrc <> 0.
      EXIT.
    ENDIF.
ENDDO.
"Close the file on application server
CLOSE DATASET lv_as_fn.

Opening Installation File In Applications

Similar Messages

Maybe you are looking for