Opening Live Type Into Final Cut Express project

I cannot get Live Type to open. When in Final Cut Express the icon box comes up with 'File Error - Wong Type'. Don't know where else to look

You cannot open LiveType or a LiveType project in FCE. LT is a standalone application. You can import a finished LT project into FCE, but you cannot open it.

Similar Messages

  • HT5103 How can I open Final Cut Express project in Final Cut Pro X?

    How can I open Final Cut Express project in Final Cut Pro X?

    If you export the project from FCE you can import the QuickTime into FCP. You can do limited work to it like adding titles.

  • Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?

    Hi, Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?

    Absolutely.  Go to File->Export->QuickTime Movie (do NOT use QuickTime Conversion).  Make sure you check the Self-Contained box.  The export will be an exact copy of your Sequence, complete with any filters or other effects you've added.  Import the self-contained movie back into the project (or another project) if needed.
    -DH

  • Can I open my final cut express projects in final cut pro X?

    I need to get footage out of some of my final cut express projects and put them in final cut pro X, which I am now using. How do I do that?

    You can export any movie from FCE to Quicktime, and use it in FCP X. If you export using ProRes 422 codec it will already optimized for FCP X.
    What you can't do is use the FCE projects themselves in FCP X.

  • Uploading Hi8 Videos into Final Cut Express

    Hi,
    I am having trouble uploading H8 video files into Final Cut Express.
    What I have is:
    Sony Player SLV-T2000
    Canopus didital converter ADVC-100
    I have connected the rca cables from the player to the digital recorder and then the firewire cable from the digital converter to the Macbook Pro. Also the digital convertor is set for analogue in.
    When I play the Hi8 tape I can see the video in the viewer but it will not capture.
    Can someone advice me where I am going wrong.

    Hi
    May be You find something here (it's not only for iMovie but FCE/P too)
    NO CAMERA or A/D-box
    Cable
    • Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
    • Test another FW-Cable very often the problem maker.
    Camera
    • Test Your Camera on another Mac so that DV-in still works OK
    • Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
    • Some Cameras has a Menu where You must select DV-out to get it to work
    • Camera connected to "charger" (mains adaptor) - not just on battery
    • Camera set in Playback mode - NOT Recording mode
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK e.g. recording and playback to TV)
    A/D-box
    • Is the dip-switches set right ?
    • Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
    • Try resetting it
    Connections
    • Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
    Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
    the Movie project to dedicated external hard disk.
    • FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
    External device’s (hard disk’s)
    • Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
    • MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
    Mac
    • Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
    after material is imported and edited.No Camera or A/D-box
    • GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
    • Does Your Mac have a FireWire Port
    • White MacBooks - don't
    • MacBook-Air - don't
    if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
    else - NO SOLUTION
    Only option as I get it is either
    • Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
    • Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
    • If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
    You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
    has one and this FW-Card-port works greatly.
    SoftWare
    • Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
    • Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
    • FileVault is off ? (hopefully)
    • Screen Saver - OFF
    • Energy Saver - OFF
    Using WHAT versions ? .
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie’08 (7.1.?), 09 or 11 ?
    • iMovie HD 6 (6.0.4/3) ?
    Other ways to import Your miniDV tape
    • Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    • If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE   Mac OS Extended   formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935.
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten.
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check.
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About . . / More . .
    under Firewire.. what do you read . . ?
    More
    • FileVault - Secure that it’s turned off
    • Network storage - DOESN’T WORK
    • Where did You store/capture/import Your project ?
    External USB hard disk = Bad Choice / FireWire = Good
    If so it has to be Mac OS Extended formatted
    ----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
    mbolander
    Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
    I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
    No Camera or bad import
    • USB hard disk
    • Network storage
    • File Vault is on
    jiggaman15dg wrote
    if you have adobe cs3 or 4 and have the adobe bridge on close that
    or no firewire will work
    see if that helps
    DJ1249 wrote
    The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
    MaryBoog wrote
    Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
    //support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
    What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
    Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
    Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
    Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
    This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
    Yours Bengt W

  • Importing Final Cut Express projects

    Hi,
    I cannot see how to importing my older Final Cut Express projects into Premiere Pro CS5. I know this can be done with Final Cut Pro via the XML format, but it seems that FCE does not export to XML. Does anybody know of alternative ways of exchanging data? Maybe, a file converter of any kind?
    Best regards,
    Paolo

    Yes, I have a couple of them, but they have their lives :-)
    I guess I can have their help, as soon as they can. In any case, being independant with this kind of things would be great.
    However, I guess that this conversion is to be done once, since I don't plan to downgrade to FCE again (unless Adobe stops developing Premiere for Mac again, or I end up with no money to buy the upgrades...)
    Paolo

  • Bizarre results importing imovie into final cut express?

    I have filmed different interviews which were captured in imovie. I am now trying to import them into final cut express. But when I import one interview called, say, Gavin I get Karen's interview instead. The clip is labelled Gavin but the footsage is from a different interview. No matter who I import I get a completely different project and there is no rhyme nor reason to the footage that opens up.
    Basically I get the wrong footage with every clip I open.
    Please help before I end up in the loony bin!
    Exasperated,
    Clare

    I bought Final cut express just after capturing all my files in imovie (having heard that it was supposed to be easier to cature and trim in imovie before sending the files to fce - is this what you have heard?). If it weren't for a solid week capturing and trimming 40 hours of film I would recapture in fce!!
    I have even replaced the captured media within the scratch folder but still it opens the wrong files.
    The files are labelled as the interviewees name. All the books say that you can import imovie projects into fce and then render and save as fce files.
    I have tried various methods of importing, opening and even dragging a clip straight from imovie into the browser of fce - which works but opens an original untrimmed version rather than the short trimmed version and again it will be an interview of the wrong person.
    I have since been turning the imovie files into .mov files and opening them in fce - this seems to work but hope there is no change to quality.
    Would this be the way to go? I would so appreciate an answer!
    Thanks

  • Family Videos on DVD into Final Cut Express and external hard drive?

    I have family videos that were transferred from video tape to DVD. I now want to get the DVDs into Final Cut express to make movies.
    1. I am using mpeg streamclip -- what format is best to save to disk to work with FC express? DV or QT? Other?
    2. Is it faster to use an external drive (firewire) or the main hard drive of my computer? I have an iMac (intel, very first one) as well as a recent macbook pro 2.33 GHz core duo)
    3. I have an external fantom drive (1 TB) that I had connected to an airport extreme, and used briefly with user login as a central server. I now want to connect this to my iMac, but with some files I get "error code 0" when I try to copy them over, and others will work. I had hoped to keep all of the dVD files which I anticipate will be large on this drive. Anyone know what this means? I do also have a 500 GB G drive which works perfectly, but I suspect is not as fast.
    Thanks to anyone who can help. I am new at this and excited about making the movie, but not about the learning curve -- had been proficient with iMovie until the new version came out.
    thanks
    Paul

    I don't know how new you are to Streamclip but there are 2 DVs and the one you want is got via QuickTime as Tom said.
    When you drop your DVD files onto Streamclip and go up to the File Menu you will find "Export to QuickTime" and "Export to DV".
    The second one, I believe, is for iMovie but for FCE you click "Export to QuickTime" and in the window that opens you alter the "Compression" setting from "Apple Motion JPEG A" to "Apple DV-PAL" or "Apple DV/DVCPRO-NTSC" as appropriate.
    You can usually leave all the other settings alone, click "Make Movie" and wait !

  • IChat Video Recordings into Final Cut Express 4?

    Hello,
    Does anyone have any suggestions as for the best way to import iChat (Leopard) video recordings (320x240 pixels) into Final Cut Express 4? FCE says the file type isn't supported.
    Any help/suggestions much appreciated!
    Paul

    That's an interesting idea, I may try it for my future attempts.
    This time round, I've just booted up iMovie 06 HD and imported it as 'isight' and used that program to work with the iChat video.
    I think this is one of the things I miss from working with low-end PC video editing software like VideoStudio - you could specify the input video parameters, whereas I believe you need to go all the way up to Final Cut Pro to do similar on the Mac!

  • Iphotos into Final Cut Express?

    How do I import photos from iphoto into Final Cut Express to make a hi-end slide show? I'm new to FCE, so I appreciate any help you guys could give!

    Carolyn
    Personally, I did use PhotoToMovie quite a lot. It has a nnice clean interface. I checked out the Fotomagico a few times, but the app seemed fussy and cluttered (YMMV). However, I needed to do a big project last autumn using a little animation (largely done with wipes) as well as the slides and I finally got - to some degree - comfortable with FCE.
    Where FCE really began to shine was after the big work was done. We had a slideshow with motion graphics (pan and scan) plus a narration. When the client wanted to drop a sentence from the narration and change another it was a few seconds work. Literally. For that kind of control there is nothing in PhotoToMovie or the other apps that will even come close.
    My advice is -and this and a dollar together might pay for a coffee - is to stick with FCE. When you have a problem it has many more ways to solve it than the others. Further, for my money, the time it takes to learn the app is well repaid: remember the learning you do on the montages will also feed into the video work and vie versa. You'll be learning one tool, not two.
    Regards
    TD

  • Cannot load Garage Band '09 tune into Final Cut Express 4

    Just bought FCE 4 and am trying to load a Garage Band '09 tune into it. Receiving a file error. Do I need to convert into some other format before loading into Final Cut Express 4?

    Open your music in GarageBand and select Share>Export your song to disk.
    You can then choose either "CD Quality" or "Compress".
    If you select "Compress" you can alter the format from AAC to mp3, which will work in FCE after a quick render.

  • I have a .mov file that is 59 gigs.  Is there a converter that can reduce the file size with minor resolution loss so I can import it into final cut express?

    I have a .mov file that is 59 gigs.  Is there a converter that can reduce the file size with minor resolution loss so I can import it into final cut express?

    Open the file in QuickTime Player. Then do Tools > Show Movie Inspector.  What does it say for Format and FPS?
    At 59GB, I suspect you have either a 4 hour DV video or a 1+ hour video that was converted to Apple Intermediate Codec.   If it's either of those, you can import it directly into FCE provided you select the appropriate Easy Setup first.  Your clips have to match the properties of the Easy Setup you are using.
    If it's neither DV or AIC then you need to convert it to one of those codecs.  (QuickTime/DV or QuickTime/AIC)  Many people in this forum rely on MPEG Streamclip (it's free and works great).

  • Will 7toX translate Final Cut Express projects to FCP X

    Does anyone know if the new 7toX application will translate Final Cut Express projects to Final Cut Pro X?

    So can you open a Final Cut Express project with Final Cut Pro 7, save that as XML, and then use 7toX?
    . . . I realize, of course, this won't help anybody who doesn't have FCP 7.

  • Starting a Final Cut Express project

    When I try to open a Final Cut Express project by double clicking on the logo of the project the operation fails and I get a notice: "The operation could not be completed. An unexpected error occurred (error code -10660)". I can only open the project by clicking the alias of the application itself and open the project from within the application, which is much less convenient (sometimes another Final Cut Express project is first downloaded, which may take a lot of time).

    It is good practice to save & close your project(s) before you exit FCE, especially if you are working on more than one project.
    When you double click on your project file to open FCE, you are commanding FCE to start up & open the project you just double clicked - but since you didn't close your previous project, when FCE starts up it also attempts to open the previous project(s) at the same time ... and there is lots of potential for conflicts.

  • Importing video files into final cut express

    I am a pro tools engineer and have just dove into final cut express 4.0 to do some simple video editing.I have a cannon camera with a sd card.I archived the video to a hard drive so I could free up the card.I can not find a single piece of evidence that explains how I can import those files from my hard drive.Everything that is mentioned is comming from a camera.I also tried by the book importing a Imovie to start simple.No luck.It shows up in the directory but there is no video.Needless to say I am lost!!!!

    If you still have the original video on the memory card, put it back in the camcorder. (Don't try to copy it back from your Mac to the card, however.) Connect the camcorder to your Mac via USB and try capturing the video via FCE's Log & Transfer function.
    In most cases when people merely copy video files from a camcorder's memory stick or hard drive (usually AVCHD video) to the Mac desktop or a folder, they don't copy the full directory structure on the card, which is essential. Is that what you did when you 'archived' the video? Can you provide more specific info?

Maybe you are looking for