Opening mac pro and warranty

Hello all,
I have just purchased a mac pro, but the whole warranty thing is not clear to me.
I purchased the mac with the stock 320gb hard disk, but I have another 320gb disk at home from an other pc.
I was wondering if I can open the mac myself and add the disk or would that void the warranty?
Thank you.

So in other words. It is allowed to add a hard disk yourself without breaking the warranty?
Yes, providing you don't break anything, such as by forcing a PATA drive into a SATA socket.
If you have to have it repaired, though, it is best to remove any non-Apple parts so they won't blame them for the problem.

Similar Messages

I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?

I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?

download the installation files and install using your serial number or adobe id,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I had an HP laptop. Just bought Mac Pro and want to get my music and photos over into my Itunes. Can I just open up my I tunes in my new laptop and then sync my Iphone or I pod with it and will all the music andphotos move over?

I had an HP laptop. Just bought a Mac Pro and want to get my music and photos moved over. Can't I just open my I tunes in my new laptop and then connect my Iphone or I pod and sync my music into my I tunes?

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Mac Pro and Mac Book Air purchased in the US and brought to India have warranty coverage in India ?

Would an Mac Pro and Mac Book Air purchased in the US and brought to India have warranty coverage in India service center ?
Ravi P

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare.
Best.

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

What specific KB?
Do you know it works?
I set my 2103 nMP with an older (black) Apple USB KB and it worked fine

I have Mac pro and firefox 3.0.19.I am trying to download a video from youtube.? I can see the video. I want to download it and save in my computer to see it again. I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me t

I have mac pro and firefox 3.0.19
I am trying to download a video from youtube.?
I can see the video. I want to download it and save in my computer to see it again.
I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me the choice of place to save,and when I click and choose desktop , for example, this message comes ."Conversion requires an external application that appears to be missing on your system. Configure conversion ?
When I click on okay, another page comes, which says" converter and a box next to it . in the box is written FFMpeg. but I can change it to MEncoder. In another box, says configure conversion rules. When I click on it, nothing happen.Thanks for your help.
== This happened ==
Every time Firefox opened
== I want to download a video from youtube

No, this reply is not helpful. It simply generates this little gem:
"This service requires the conversion feature to be enabled.
Configure conversion ?"
And the same clicking on buttons that makes nothing happen and going around in circles with the escape key.

I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?

Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard.

What is better Mac Mini or Mac Pro and 4K 40" screen or iMac 5K for work with Exel

I am working on Macbook pro retina for around 16 hours a day, it is ok but the screen is to small. I am opening about 25 - 30 EXCEL windows, 20 - 25 safari windows at the same time. Excel windows are small, they only show 40 rows and S column Now I am considering buying iMac 5k ( but the screen is only 27", however a very high resolution but I think that fonts and digits displayed may be too small ). I am also considering Mac Mini or Pro with 40" 4K TV ( 4k computer monitors are 27 - 31" , so better idea would be purchasing iMac 5k ) . The problem is that 40 - 42" TV don't have Display Port ( I can't find it anywhere )
Please help me to choose what would suit my needs better. I need large screen to work comfortably with an Excel sheets. What is better? Mac Mini or Mac Pro and 4K 40" screen or iMac 5K for work with Excel ?. The other problem I have is that when I spend 16 hours at work with retina macbook , my eyes are ok. Using the 30'' Dell screen 2560/1440 my eyes are tired after 2 hours.
Thanks for your help on advance
Best regards
David

Currently you can only get 4 K at 30 Hz via HDMI. Some users have reported jerky curser movement because of the 30 Hz.
I would go for the 5K iMac. You can add a second screen at 4K.
FaceTime HD camera
Simultaneously supports full native resolution on the built-in display and up to 3840 by 2160 pixels on an external display
Support for extended desktop and video mirroring modes
The Mac Mini supports:
Support for up to two displays at 2560 by 1600 pixels, both at millions of colors
Thunderbolt digital video output
Native Mini DisplayPort output
DVI output using Mini DisplayPort to DVI Adapter (sold separately)
VGA output using Mini DisplayPort to VGA Adapter (sold separately)
Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
HDMI video output
Support for 1080p resolution at up to 60Hz
Support for 3840-by-2160 resolution at 30Hz
Support for 4096-by-2160 resolution at 24Hz
The 2013 Mac Pro can use three and more displays:
Mac Pro (Late 2013): Using multiple displays - Apple Support
I would go for multiple screens

Is my mac pro and visio 42' tv compatible?

I am trying to use my 42"Visio LCD as a monitor on my mac pro and I am having no success. Are they compatible? If they are any help would be appreciated on making it work. They are connected with a DVI-d to HDMI cable.

Set the TV to the input you connected the HDMI cable to.
On your computer, if you open the Displays preferences and do not see an Arrangement tab (or there is an Arrangement tab that shows only a single monitor) then there is something physically wrong with your connection. Try clicking Detect Displays just to see if the computer can now sense the presence of the connection.
If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the TV's Displays preferences on to your main screen if the TV is not yet showing an image. Set the proper resolution (probably 720p, 1080i, or 1080p). Set the refresh rate (probably 60Hz) if that preference is shown. You should see a picture at this point. I recommend turning off mirrored displays if it is enabled.
You may have to play with the underscan/overscan settings on your TV and the displays prefs for the TV if the picture is too small or larger for the TV screen.
When using a DVI connection for the video you need to handle the audio separately since audio is not passed through DVI. You could connect your stereo audio out to your TV (3.5 mm stereo jack for the compter to usually RCA jacks on the TV).
And if running Lion, do not run in Lion full screen mode.

Can I remove a CD Rom from one Mac pro and re-install it in another mac pro

One mac pro, my computer has a CD ROM that doesn't open and my brother's old Mac Pro has a CD ROM that still opens and closes how easy would it be for me to remove the CD ROM from my brother's old Mac Pro and re-install it in my Mac Pro

2008 and previous used ATA/IDE DVD Readers.
2009 and later used SATA DVD Readers.
You cannot cross the line without changing the cabling, which may be more expensive that just replacing the drive with a new one.
You both should be sure to update to 10.6.8 if you have not already done so, to provide enhanced malware protection. If you cannot do that, turn off JAVA (not javascript) in all your Browsers.

Which video card to buy for Mac Pro and AE CS3

I am about to purchase a new Mac Pro and am curious which video card to buy - particularly when it comes to rendering speed.
Apple offers the ATI Radeon HD 2600 XT with 256MB of GDDR3 as a standard option, with the NVIDIA GeForce 8800 GT with 512MB of GDDR3 as a $150 BTO option.
I primarily use AE CS3 using adaptive resolution in lieu of Open GL. The projects are very 3d intensive. My initial thought is that the NVIDIA card has more VRAM and would be a better pick - but would my $$$ be better off toward more RAM? Does using CS4 make a difference?
Any thoughts would be appreciated. And yes, I have searched the forums but have not found anything definitive.

Personally, I'd buy more RAM. The standard display card supplied with the Mac Pro will have perfectly good specs for AE and Prem Pro.
Yes, CS4 should render faster than CS3.

Unable to open Mac Pro Superdrive

I'm currently unable to open my superdrive on my Mac Pro and am looking for any tips on how to correct. I was thinking about installing a blu ray drive in my Mac Pro and had watched the proper instructions on how to accomplish this task. I had the drive installed on the bottom rack and decided to abandon the idea and just keep with the one drive. So, after putting everthing back where it should be (supposedly) I'm finding a misalingment on the hinged dust cover door that prevents my superdrive from opening at all (see photo). I'm at a loss on how to make an adjustment to correct this and was hoping someone might have some hint to share.
I've included pics that show the misalignment if it helps to demonstrate where the problem lies. Any suggestions would be greatly appreciated.

yeah, alignment can be a pain. should be as easy as making ice, but somehow it isn't. Check to make sure the drive is fastened correctly into the sled on both sides. make sure that the sled hits all the pins as you slide it in. Make sure that the cable is tucked well out of the way and isn't stuck/binding on anything. there isn't a lip on the disc tray is there? I think there might be a screw on the side of the hinged door which might help or not--could be tight. looks to me like one side is a bit up and the other side isn't. may a little push in the right spot might help....
if you're still stuck I think there's online videos on how to put a drive into your Mac Pro which might help you out a bit
John b

Mac Pro and FCP - Very Unstable

I just purchased the Mac Pro and installed FCP 5.1.2. I have a dual 2.6 Ghz with 2.5 TB external eSATA Raid (using the Sonnet E4P card), Kona LHe Card and 3 GB of RAM.
1. FCP, Quicktime and Shake each unexpectedly quits on playback of video within a few minutes of opening and
2. Video in FCP and Quicktime has blocky (colored lego) defects and corruption.
I suspect this may be the RAID or Quicktime, but this is about the most unstable FCP setup I have ever experienced since FCP 1.0.
Any suggestions? is it my RAID controller card, Quicktime, FCP or something else?
Thanks.

Just found this for Dan - http://www.amug.org/amug-web/html/amug/reviews/articles/sonnet/e4p/
Scroll down a bit - they recommend using it in an appropriate slot - something else to check ....
oh sorry - that's for a G5
http://www.sonnettech.com/downloads/adapter_sw.html
Have you installed the Serial ATA Firmware Updates/Drivers from Sonnet - specific for the MacPro?
Looks like they're all still in beta ...

I have a Mac Pro and it seems to have a malware. How can I remove it

I have a Mac Pro and seems like it has a malware, adware . How can i remove it. MACkeeper keeps on popping

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

I had to remove my drive from a broken mac pro and put in another mac pro now my adobe master collection is telling to sign up for a trial

i had to remove my drive from a broken mac pro and place it in my spare mac pro, but now my adobe master collection is asking my to sign up for a trial

uninstall and clean adobe programs you 'migrated' - Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
and then properly install your master collection.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Opening mac pro and warranty

Similar Messages

Maybe you are looking for