Opening MDF files in Diadem generated with Vector CANape v7.0?

Hi all,
I have a Vector CANape v7.0 data aquisition system that generates files in MDF format. I found the Diadem data plugin for MDF files and installed it. I can open the files, see the parameter names, but all the data is 0 (and it should not be).
The plugin looks up to date and the description mentions MDF version 3.0 & 3.2. We have CANape version 7.0. How do those numbers correspond? How can I open this file correctly?
Plugin Description:
This DataPlugin supports reading / importing of Bosch MDF data files, ETAS INCA® MDF data and Vector CANape® and other products from Vector. The DataPlugin supports MDF files up to version 3.2. The MDF DataPlugin also supports writing of MDF 3.0 and 3.2 files. Writing behavior is controlled by the root property 'version'; set version to "MDF 3.2" to write MDF 3.2 files.
The Measure Data Format (MDF) is well established in the automotive industry for recording, exchanging, and post-measurement analysis. MDF files are produced by eg. INCA® from ETAS, and by CANape® and other products from Vector.
Thanks- Dshow
P.S. I have tried this on Diadem v10.1 and 11 with the same results. Thx
Message Edited by Dshow on 07-13-2009 02:12 PM
Solved!
Go to Solution.

Hello Dshow,
Since I don' have any MDF files to test this with, I can't help with your immediate question. I can offer up an alternative though:
With version 11.1, DIAdem has gained the ability to load CAN files directly through the "CAN Converter" that can be found in the NAVIGATOR "File" menu. You can test this with the free evaluation version that can be found at http://www.ni.com/diadem/ - this might take care of the issue you are having. It also offers a number of additional features you might be interested in ...
Best regards,
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Similar Messages

Cannot open eps files on maverick oSX with CS6

I cannot open eps files on maverick oSX with CS6. AI and FW just hang and need to force quit to continue.
I have tried using FW but no success. I can open old files but no new ones (existing on my computer) since upgrading to Maverick on a Macbook air.
The files will open in Photoshop (as raster) and are able to be placed in ID.
No Plugins in AI or FW.
Latest Java update.

If you can't open them, but place them, then the files might have been created with a newer version (like CC) or they might just be (partly) corrupt.
You can try and create a new Illustrator file and place the EPS in it (embedded).

Issue opening *.mdf files in SqlServer Express 2008 R2

Windows 7 Home Premium (64-bit), VS2010 Pro, SQL Server Express 2008 R2 (tried both x86 and x64)
Error showing in visual studio
The database 'C:\USERS\SWATI\DOCUMENTS\VISUAL STUDIO 2010\PROJECTS\ONLINE SHOPPING CART ASP.NET WEBFORM\C#\MYPROJECT\APP_DATA\SHOPING.MDF' cannot be opened because it is version 661. This server supports version 655 and earlier. A downgrade path is not supported.
Could not open new database 'C:\USERS\SWATI\DOCUMENTS\VISUAL STUDIO 2010\PROJECTS\ONLINE SHOPPING CART ASP.NET WEBFORM\C#\MYPROJECT\APP_DATA\SHOPING.MDF'. CREATE DATABASE is aborted.
An attempt to attach an auto-named database for file C:\Users\SWATI\Documents\Visual Studio 2010\Projects\Online Shopping Cart Asp.Net WebForm\C#\MyProject\App_Data\shoping.mdf failed. A database with the same name exists, or specified file cannot be opened,
or it is located on UNC share.

Hello,
The version of SQL Server installed on your computer is SQL Server 2008 (version 655), but the database you are trying to attach to that instance was created on a SQL Server 2008 R2 instance, It is like trying to downgrade the database and that is not possible.
Probably you have SQL Server 2008 Express Edition installed. Try upgrading it to SQL Server 2008 R2 Express Edition.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Error No. 11 Cannot open .MDF file

Hello,
I am using DIAdem 12.0.0f4911 TDM and I cannopt seem to open this particular .MDF file. The Error I get is "XXXXXX.MDF" file has an invalid format. (error no. 11)
I have opened other .MDF files without issue however this particular file is nearly 3 gigs in size. Is it possible the file size it is too large?
Tim
Solved!
Go to Solution.

Thanks
I loaded the MDF plugin and started DIAdem.
I have since loaded the data into the Data portal but DIAdem is cycling between "Not Responding" and "Responding" and has been doing so for over 2 hours now. I am not sure if it is working, but I will give it some more time before I kill the process.
Thanks for your help nonetheless.
Tim

Can't open AEP file, crashes AE 6 with error messages...

I've been rendering a 3D scene for a few weeks and got all the final frames finished on Thanksgiving. I've been composing them all weekend and one particular file I had all put together and then saved it and closed it and tried to open it Adobe Media Encoder to make a final video to send off to the client. Encoder repeatedly would hang at 100% opening the file, so I decided to open up AE again to see what was up and sure enought the file itself wouldnt open anymore. I get the error message [After Effects error: crash occurred while envoking effect plug-in "Auto Level"] and then [After Effects error: Crash in progress. Last logged message was:<3376> <Dynamic Link> <5> C:\Program Files\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro.exe]. Then it crashes completely and asks if I want to save the file. Of course the resulting saved file is only a fraction of the oriiginal file size and doesnt open either. I tried emptying the cache files and turning on caps lock, tried to import the file into a new project and even place it on the Premiere timeline. No dice, nothing I know seems to work. I'd really rather not have to redo the 10+ hours I spent composing all those layers and re-adding back all the effects work. I can see all my compositions in the background while its crashing (which just pains me). Any way I could get my file back into a useable state?? Wouldn't care if I needed to re-do some of it, but deadline is approaching fast and I just can't be spending all the time to redo this one scene.
I'm on a 6core i7 PC, Win7 64bit OS with 32Gb of Ram and an Nvidia 670GTX 2Gb video card , 2 internal SSDs set as RAID for the boot drive. Of course this is all in After Effects CS6 from the master collection. Everything is latest driver as of 4 weeks ago when I started all of this (brand new machine!). I am composing 16bit PNG image sequences, and adding standard color corrections and image tuning, as well as a pass in Red Giant Looks, Re:visions Reel Smart Motion Blur and Video CoPilots Optical Flares.

What Dave said. MP is hopelessly overrated. Sometimes it works splendidly on simple projects, most of the time not so much when you throw halfway complex stuff at it. In your case it would have been quietly disabled behind your back, anyways (read this for reference: After Effects Help | Memory and storage), but with AE anything is possible. I suspect that a conflict between hardware acceleration features for another effect or footage decoding made things go boom in your case, but without knowing al lthe details, it's impossible to tell what exactly caused the breakdown.
Mylenium

Can't open pdf files in Windows 8 with Acrobat XI

I have windows 8, and Mozilla Thunderbird email client. When attempting to open PDFs I get this message "Adobe Reader could not open 'Wiring Invoice 409343281 Dated 04_05_2013-2.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)." I have tried documents from numerous different sources, all with the same result. I have uninstalled, reinstalled, repaired, restarted, etc. I did not have this issue with XP and Acrobat reader X. HELP!! I cannot print invoices until this is corrected....thanks!

Hi,
Are you try to open PDF file attachments from Mozilla Thunderbird.?
Could you try to save the PDF file locally and then try to open the PDF file?
Or try downloading sample PDF from here http://www.samplepdf.com/sample.pdf and open it in Adobe Reader.
Thanks

Can not use scroll mouse in html tab when open pdf file in new tab with middle button but will avaliable only after switch to pdf tab and switch back to html

When I open a "pdf" file in new tab with middle mouse click. After few second my mouse will not able to scroll in page that I read. But it will be able to scroll only after I click to any opened pdf tab and click on pdf document and click back on previous tab to continue reading. It is not only happen on my laptop also on my desktop too. (winxp 4gb/8gb ram core2 duo 2.66)

There's a Bug filed about that issue.

Wpf open PDF file in Adobe Reader with a click on a button

I need a button to open a PDF file with Adobe Reader. I have the following code but it does not work. The file is inside Books folder
on my application.
private void openPDF(object sender, RoutedEventArgs e)
try
System.Diagnostics.Process process = new System.Diagnostics.Process();
bookPDF = "Books/" + dataRow.ItemArray[6].ToString();
Uri pdf = new Uri(bookPDF, UriKind.Relative);
process.StartInfo.FileName = pdf.LocalPath;
process.Start();
process.WaitForExit();
catch(Exception error)
MessageBox.Show("Could not open the file.", "Error", MessageBoxButton.OK, MessageBoxImage.Warning);
I tested a simple string with a test pdf file to open and it opens.
String file = "C:\pdf\Windows_Server_2008_R2_Unleashed.pdf";
process.StartInfo.FileName = file;
process.Start(); process.WaitForExit();

Hi Carlos Sota,
In my experience, I suggest that you could set Copy to Output Directory property of the PDF file to “Copy always”.
Below are my code snippet and screenshot.
private void Button_Click(object sender, RoutedEventArgs e)
try
System.Diagnostics.Process process = new System.Diagnostics.Process();
string path = AppDomain.CurrentDomain.BaseDirectory+@"/abc.pdf";
Uri pdf = new Uri(path, UriKind.RelativeOrAbsolute);
process.StartInfo.FileName = pdf.LocalPath;
process.Start();
process.WaitForExit();
catch (Exception error)
MessageBox.Show("Could not open the file.", "Error", MessageBoxButton.OK, MessageBoxImage.Warning);
Best Regards,
Xavier Eoro
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Opening the file in original res with Aperture changes

I am working with RAW files from a Phase One camera back. The file size in aperture shows correctly 35.6 MB for the file. When I open the image or export it I only get the preview sized file instead of the referenced file on the external disk. I assume that when you manage referenced files, and the external drive is connected, you can actually perform edits in aperture like cropping, white balance etc, and open that file in full resolution, but I have not been able to make it happen. Even if I choose "export master" I get a small file.
External editor format is set to PSD and 300 dpi, preview file setting is set to "don't limit" and everything else is set to maximize the output when the export box is up.
I hope someone has the answer to this probably dumb question!

That is too bad. Aperture seems like a great way to manage files by proxy. Since I have 50,000 images in my archive shot with phase one cameras, it would be great to get them cataloged.
Maybe one day.
Thanks for the info!

Open XML file in XML editor with certain XPath highlighted

Hi,
I have wrtten an XML compraison tool which produces an HTML report of all differences and shows the xpaths where there is a mismatch. I want the user to be able to click the xpath (like hyperlink) and open the XML file using IE or any opensource XML editor (xerlin?) such that the xpath node is the current highlighted node on the screen. That way the user can right away seee where the mismatch is. As a next step I wanted to open both the control and the test files side by side with both xpaths highlighted.
Any idea how I can approach the problem? Is there any open osurce software I can leverage and integrate my application,
Thanks,
Abhijit

This code of yours should work.
<% if display_url is not initial. %>
<script language="Javascript">
url = "<%=display_url%>";
window.open(url, "Zusatz", "width=400, height=400");
</script>
<% endif. %>
what happens, it doesnt open new window at all or new window is opened but xml doesnt show up?
Regards
Raja

Opening PDF files on the web with IPad

Hi everyone
I am having difficulty opening some (but not all) pdf files on the web with my IPad. When I click on the icon it comes up with approx half of the first page of the document, but nothing else. It also does not provide an "open in" bar. Any thoughts on what is going on here?
With thanks, Mike.

Thank you for following up. We often have people reporting similar problems and I suggest they follow up with the website owner but I rarely hear back from the original poster so I'm never sure that this is indeed the problem. Ironically, serving a document for mobile is almost easier than serving it to a desktop browser because there are no plugins to get in the way. That said, a lot of website owners have gone through pains to do plugin detection and user authentication and authorization and mobile represents another case that they would need to handle on top of what they already do.

[Solved] Auto-open a file manager after mounting with udev rules

Hellooooo,
I followed the udev Wiki for auto mounting USBs and it now works great.
The only problem is: how can I automatically open a file manager of the mounted directory? I tried putting this at the end of the "ACTION=="add"," section in "/etc/udev/rules.d/11-media-by-label-auto-mount.rules" but for some reason nothing happens:
, RUN+="/usr/bin/dolphin /media/%E{dir_name}"
Even if I just try to open dolphin with the "ACTION=="add"," section nothing happens either way.
So what am I doing wrong?
Last edited by algorythm (2011-05-05 12:35:56)

In that case, the best choice in my opinion is to use Automounting UDisks Wrappers :
devmon is a script developed by IgnorantGuru. He left Arch Linux, but the package in AUR is still there and is the last version. For a future new release, it should be available at his blog site. The script is distro independent.
My udisksvm script, in its default state, doesn't launch a file manager after automounting, but it is not a big thing to let the automounting be done and then manually open a file manager (a new entry in the traydevice right-click menu can also be added for that).
If you can do without automounting, there is also the bashmount script from jnguyen.
All these scripts don't require writing any udev rules, they use udisks instead.
I hope you could find something you like and which will suit your wishes.

Can't open .nib files on Intel iMac with IB

I'm trying to edit .nib files for my lab (have had no trouble until now) and they won't open. I keep getting the "can't open" error.
This is my first time trying to edit an x86 based .nib file, is there something different, is there a way around this? I have permission to open them (even tried root).
Dave

Interface Builder .nibs aren't actually files but are packages. In the Finder, you can Control-click on them and choose "Show Package Contents" to view inside of them.
Inside of a .nib file you save from Interface Builder, you'll find the following files (which are actually files):
objects.nib (Pre-10.2 nib format)
keyedobjects.nib (10.2 and later nib format)
classes.nib
info.nib
The "objects.nib" and "keyedobjects.nib" files are the actual archived objects of your nib, while the "classes.nib" and "info.nib" are secondary files that allow you to open the .nib file in Interface Builder to edit it. Without the "classes.nib" and "info.nib" files inside the .nib, you won't be able to open the .nib in IB, yet the nib will still work properly for the application it's part of. Before releasing an application, some developers will remove the classes.nib and info.nib files from the .nibs in their apps to prevent end users (or their competitors) from being able to open and/or tamper with their nibs in Interface Builder.
Make sure all the parts are inside the nib files and see if they'll open. Otherwise, you might check the Console to see if anything is reported when you try to open the files.
Hope this helps.....
Dual 2.7GHz PowerPC G5 w/ 2.5 GB RAM; 17" MacBook Pro w/ 2 GB RAM - Mac OS X (10.4.6)

Cannot open CR2 files from Canon T4i with Photoshop CS5

Please help

tienstran,
Don't hold your breath. You will NEVER be able to open raw files from a Digital Rebel T4i EOS 650D EOS Kiss X4i directly in CS5.
There wil not be any further updates for CS5, ever. The last version of ACR that will ever run with CS5 is ACR 6.7.1, and you are correct that you need at least ACR 7.1 (or higher) to open your files.
On the other hand, you are wrong about support for your camera in the free Adobe DNG Converter. All versions of the Adobe DNG Converter form 7.1 and up—including the Adobe DNG Converter 8.1—do support your camera model.
Once a version of either ACR or the Adobe DNG Converter supports a given camera model, all subsequent versions will continue to support it.
So, go and download the Adobe DNG Converter 8.1 and convert your raw Canon files to raw DNG files that you can now open in any version of ACR that will run with CS5.
Remember: the Adobe DNG Converter works on folders containing your raw files, it does not see the individual files in the folder. You must point the Adobe DNG Converter to the folder itself, not the files.

.css and .swf files are getting generated with Ibot email

Hi Team,
I have an Ibot which use to run on daily basis which contains graph and normal table views, .css and .swf files are getting generated and attached with Ibot email to the users. I'm facing this issue from last two days. Earlier there was no such attachments sent to the users.
Could anybody let me know what might be the reason for that?

any inputs?

Opening MDF files in Diadem generated with Vector CANape v7.0?

Similar Messages

Maybe you are looking for