Opening multiple movie files to play sequentially.

Currently, if I highlight several movie (e.g. .avi) files in a Finder window and then double-click on one of them, each of the files is opened in a separate QuickTime window and if I have "automatically play movies when opened" QuickTime preference set, then they all start playing simultaneously!
How do I change it so that opening multiple movie files results in them being played sequentially in a single window?
P.S. I have "Open movies in new players" preference is disabled.
P.P.S. For image files it all works correctly - they are opened in Preview and I get an option of starting a slideshow...

Hi,
I'm not on a Mac at the moment to test, but I could have sworn you used to be able to open one movie, pause it and then drag and drop subsequent movies onto that window to append them to the end.
Give it a try. Sorry if I've been imagining things though

Similar Messages

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, Mark

Unfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

I have a .mov file that plays on my mac but when someone tries to play it on a pc, they get an error 128 message. Help!

I have a .mov file that plays on my mac but when someone tries to play it on a pc, they get an error 128 message. Help! Please!

This is not the problem. We are using quicktime on the pc's and the mac. I also tried to open the file on the pc with other programs and it doesn't recognize the file. The file opens fine on my mac but I cannot save it as a new file. It says that "the end of the file was reached." The recording was made in iShowU then edited in Quicktime Pro.

Open Multiple PDF files from Production order/Routing

Hi Everyone
We are in ECC 6.0 environment. We have a scenario where multiple documents were attached to single operation and also at multiple operations. But when I was trying to open these PDF documents, only the last file was getting opened and closing the previous file. How can I open multiple PDF files at one time from Production order or Routing?
Any help is appreciated.
Regards
Prasad

Hi Prasad,
from DMS standard I regret but such a functionality is not available. In the standard originals can be opened only one after another.
I think for realising this functionality an individual modificatoin is necessary.
Best regards,
Christoph

Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

It all depends on the codec the file uses, Karli.
What model of camcorder is this video coming from?
Are you working on a Mac or a PC? Have you got the latest version of Quicktime, per the program requirements? When you started your project, did you select the settings for a DSLR at 720p? This is a vital step since it will activate the components your computer will need to work with many of these types of files.
BY THE WAY, KARLI--
PLEASE do not post the same question more than once on this forum! You've already got a thread going with this same question and several responses posted. It's very confusing when you post the same question a second time and start a whole new discussion.

Unable to open multiple PDF files in Acrobat 9 Pro - Vista

I have a staff member that is unable to open more than one PDF at a time. If a PDF is currently open and another one is selected the program will crash and close. It gives a message stating the program has crashed and must be closed and also gives an option to check online for a solution. Has anyone else seen this issue or know a fix for it? Thanks in advance.

No. Starting with Acrobat 9 it is no longer possible to open multiple PDF files in the same window.

Not opening multiple RAW files

If i open a Raw file in Bridge, it opens up perfectly. Also my jpegs and tiff open in RAW, so no problem there. The problem is, that I cannot open multiple Raw files from Bridge into Raw with the option "open in Camera Raw" So the shortcut cmd+R ( I am on a mac) does not work. It says that Raw has to be opened at least once. I have been using Raw for years now so it has been opened multiple times.
I Can not seem to find a solution. I would really like to open up multiple edited Raw files at once, and in Raw give the order to rename them into JPEG. If you do that, you see Photoshop CC and a window that says how many convertions are left. So far so good... but before, I was able to open up some new raw files in Camera Raw without having to wait for Photoshop to convert everything. Now I have to wait for a long time before I can make my new Edits. Can somebody please help me?
I am using all updated software.
Ben

Hello SSPRENGEL,
Thank you very much for your reply. My apologies for the mess up with RAW and ACR naming.
The situation is, that I can not open any file with CMd-R. I can open single files with CMD-O. But I need to open multiple files at ones with CMD-R. It used to work good.
The problem is, That I am in the business of school photography. I take the pictures as RAW files on an Nikon camera (nef) After I ajust all the pictures, I have to rename all of them to JPEG, just to get them online.
I used to do that with ACR. But now the problem is, if I open a lot of picures with CMD-O, It opens up very good in ACR and I still can give the command to save all of these as JPEG. It workt great, but I have to wait a looooooong time before I can open up my next batch of pictures and start to adjust those. Normally, it would save the files as JPEG and I was able to open up a new batch of pictures in ACR right away. That saves me A LOT OF TIME. This only works if you can open the files with CMS-R. Strange...
I updated my I-mac to 10.9.1 so I see that is not the newest. PS-CC is 14-2-1 x64 and I am using the beta ACR for now (8.4)
I just tried to open a RAW file in photoshop with the normal open command and it lauches ACR perfectly. But again from within Adobe bridge I still get the same error about needing to open a qualifying product at least once.
Stange isn't it?
Thank you very much for your time!
Ben

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s Solutions?

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s. Any ideas?

Question: Is all the source footage shot in 16 bit audio or is some also shot in 12 bit?
http://docs.info.apple.com/article.html?artnum=42973
http://www.kenstone.net/fcphomepage/idvd_6stone.html
http://docs.info.apple.com/article.html?artnum=93006
http://docs.info.apple.com/article.html?artnum=303550
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/397.html
http://docs.info.apple.com/article.html?artnum=61636
http://docs.info.apple.com/article.html?artnum=302925

How can I open a .mov file with iMovie?

Hi,
I keep trying to open a .mov file in iMovie and it isn't doing it. Is that not a recognized file extension? Should I convert the video file somehow?
Thanks!

.mov is just a container for a variety of video codecs, some of which are not recognized by iMovie. You will need to convert it first with a third party app such as Media Converter (which is free, see: http://media-converter.sourceforge.net).
Another free app VideoSpec (see: http://videospec.free.fr) is useful for identifying all the details of a video clip
Geoff.

How to open multiple sql files in only one ssms instance

how to open multiple sql files in only one ssms instance, I can't get anything to work that I find online..I hope you can help us.

I tried opening two files but selecting and hitting enter. it opens one SSMS and two tabs.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Opening a .mov file on a Mac across a Windows network causes hang

QuickTime player hangs when I try to open a .mov file on a networked Mac OSX machine from my Windows XP machine. This happens 80-90% of the time; that is, not every time, but most of the time.
I've tried this from 2-3 different machines, and get the same result.
Interesting thing is that, if I'm viewing the directory that the .mov file comes from in Windows Explorer, Windows Explorer also hangs - so it looks like something bad in going on in the Windows networking layer.
File opens fine when I open it locally or on another Windows machine on the network.
We're actually accessing the QT SDK from an app we're developing. We first noticed this behavior in our app, and decided to see if we could repro the problem in QT player. Sure enough, we could.
Is there somewhere else I can log this message so that it will come to the attention of the SDK group? This a major problem for our app that I need to resolve one way or another.

A MOV. file can be anything.
I would suggest you download and install Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.

Problems opening a mov file on quicktime

Hey guys, i just purchased a mac and im having some problems opening a MOV. file on quicktime. FOr some reason im just getting sound and no video. Can anyone please help me out? Is there some extensions i have to download? Please let me know thanks.

A MOV. file can be anything.
I would suggest you download and install Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.

I Am Using Photoshop CS5 - I Used To Be Able To Open Multiple SINGLE Files - Now They Over Lap - What Do I Do ¿ - How Can I Reboot My App To My Original Settings ¿

I Am Using Photoshop CS5 - I Used To Be Able To Open Multiple Single Files - Now They Just Overlap As One File ! - How Can I Fix This Or Reboot My App To My Original Settings ?

In Preferences UNcheck Open Documents as Tabs

HT3775 I am trying to open a .mov file in "Quicktime" and it keeps saying it doesn't support the file.

I have made a movie in "Final Cut Pro X" saved it as a .mov file and "QuickTime" won't open it. It keeps saying that it doesn't recognize the file. Ironically there is another .mov file right next to it on the flash drive that opens just fine. I do notice that the one it does open looks like a little black box with a 'play' arrow button in it when I run the curser over it, but the one it doesn't open has a 'Quicktime' 'Q' in it.
I try to eject the flash drive and it says "Final Cut Pro X" is still using it, then it shows me a window that shows 6% progress. I am thinking maybe the movie is still loading. I really don't know.

Try VLC.

I want to open a .MOV file, but QuickTime doesn t open it. What can I do?

I downloaded 6 files from WeTransfer, all of the are .mov. There is only one file which I cannot open with QuickTime, and it tells me that the type of file is not supported.

I downloaded 6 files from WeTransfer, all of the are .mov. There is only one file which I cannot open with QuickTime, and it tells me that the type of file is not supported.
The MOV file container is generic. This means it may contain any valid combination of compressed data that was compatible with the system on which it was originally created. Different versions of the QT players are programmed to play different combinations of compressed data if
the file is not corrupted,
the file container is compatible with the player,
the player is programmed to play the compressed data in that file container,
the data was compressed correctly, and
the codecs required for playback of the compressed data are installed and available to the player.
Based on what you've said, all we know for sure at this time is that the file container should be compatible with all QT players. This means the file could be corrupted or contain data that cannot be decoded for any of several reasons. In order to determine why it doesn't play, you would need to provide more information or post the file for analysis by others.

Opening multiple movie files to play sequentially.

Similar Messages

Maybe you are looking for