Opening Multiple open multiple Scheduled work book in Discoverer plus

Hi ,
When I am about to open the 2nd schedule workbook, Discoverer plus pops up with a new window to save the prviously opened schedule workbook.
Is this the functionality of Discoverer plus or How can we avoid it.
Thanks
Naveen

Similar Messages

Erro while running query for a Scheduled work book

The following error found while running query for a schedule workbook:
ORA-12801: Error signaled in parallel query server P000
ORA-01652: uable to extend temp segment by 14720 in tablespace SYSTEM
ORA-27068: skgfdisp: buffer is not aligned properly
OSD-04005: SetFilePointer() failure, unable to read it from file
We are using discoverer 4.1.
Any help is highly appreciated.
null

Candi,
Have your DBA check for trace file and contact Oracle Support: RDBMS group to track these errors down...
Chris
null

Workbook works fine in discoverer plus but shows error in discoverer viewer

Hi,
I have some issues with the parameter of a report.
one of the parameters is
mgr_id (eg: 1,2,3) -- from database table.
manager names are not available in the database but they are known to users like
1 - david
2 - alan chris
3 - peter
so the requirement is
(i) the input parameter wud be entered as 1 or 2 or 3 or null ( or in multiple combination or all).
But the report shud have parameters in the header of the report.
for eg: if the input parameter is mgr_id = '1' then the report shud have manager name: 'david' in the header.
if the input is mgr_id = '1',' 2', '3' then on the report header, it shud display as manager name: 'david','alan chris','peter'
(ii) the default value of mgr_id shud be 'ALL'. if the user enters mgr_id as 'ALL' then it shud take all the values of mgr_id and pull all the values of mgr_id (like 1,2,3)
and the report header shud display as department name: 'ALL'
i have developed a custom query where i used,
select dept_id, decode(mgr.mgr_id,'1','david','2','alan chris','3','peter') as mgr_name, ..... etc.
in discoverer admin,
I have created LOVs (item classes) for mgr_name.
after that going to properties of mgr_name, i have selected mgr_id as indexed item.
and in the report i have created parameter dept based on mgr_name and selected the option -- allow to select both indexes and values.
and in the default value i mentioned 'ALL'.
after that i changed the condition as
((mgr_name = :manager name) OR (mgr_name LIKE DECODE(:manager name,'ALL','%')))
and in the header, i used &department name --- then it displays correctly.
but the problem is ---
the report works fine in plus. the problem is only when parameter value is 'ALL'
when i run the report from discoverer viewer for the very first time (after logging in), the report works fine with correct data.
but when i run the same report second time with parameter value 'ALL', it gives an error ---
Invalid value "''" for parameter "department name"
i dont understand, why it works for first time and doesn't afterwards. If i logout and login again, it works fine in viewer.
am i doing anything wrong in conditions or declaring the parameters?
I came to know that, the very first time, when we enter 'ALL' it is taking '%' but when we run for the second time, it is taking NULL. since NULL isn't there in mgr_id or mgr_name, it is throwing that error.
How do i fix this error?
Thanks

Hi Puppethead,
I have tried with your suggestions.
the following condition -- did not work
( (mgr_name = :manager name)
OR (mgr_name LIKE DECODE(:manager name, 'ALL', '%', NULL)))
but for the other condition ---
( (mgr_name = :manager name)
OR (mgr_name LIKE DECODE(nvl(:manager name, 'ALL'), 'ALL', '%', NULL)))
is wrong because, :manager name cud be null, when it is null, it takes 'ALL' i.e. '%' which shud not be the case.
if the user enters null, it has to display records with null only but with the above condition it takes '%'
The main issue which i dont understand is, the report works fine for the first time. for the second time, the report takes null values . why is it taking null values for the second time.
Thanks

Work book Transport BEx Analyser

Hi Experts,
I have a work book which I assigned to menu roles in Dev BW and need to get it transported to BW prod system.
I normally save this work book in roles and in my customised role and collect that work book in request to transport to prod.
I have a this problem in prod when I try to open the same work book in Prod system I have error message saying serviere program error has occurred and cannot open the work book in prod system.
please advise.
Is this problem with BEx Analyser or If I transport my role again to Prod system which is customised under which work book is saved.cant solve this issue please advise.
If I want to transport the role also how can I do that from PFCG my role name is ZXX_BW_XX.
Regards,
Tati.
Edited by: Tati Santhosh on Nov 10, 2010 9:41 PM

Answered

Problem opening excel files exported from Discoverer Plus 10.1.2.48.18

I can't open excel files (xls) exported from Discoverer Plus 10.1.2.48.18 when I enable macros. The application (Excel) hangs up.
Someone have any idea about this?
Thanks,
Diego

Hi Meifang
I did some more research and found a document on MetaLink 250820.1 that talks about Discoverer not being able to call Excel if Discoverer is running via an IP address instead of a qualified domain name.
The article talks about making Discoverer a trusted site in the Internet Options of IE. Here's the relevant info from the posting:
Workaround for MS IE (if necessary):
1. Open a new MS IE browser
2. Navigate to: Tools | Internet Options Security where you will see the Trusted Sites icon (green icon with a check mark)
3. Click the Sites button
4. Add the following: http://IP:port/
(where IP, port are the location of where Discoverer server is running)
5. Click the OK button
6. Click the OK button again
On my own PC, I was having a similar problem and I was unable to get Excel to launch. In the end I did this:
1. Open a new MS IE browser
2. Navigate to: Tools | Internet Options | Security where you will see the Local Intranet icon (computer icon against a globe)
3. Click the Local Intranet button
4. Click the Sites button
5. Click the Advanced button
6. Add the following: http://IP/ or http://website
(where IP or website are the location of where Discoverer server is running)
7. Click the Add button
8. Click the OK button
9. Click the OK button again
10. Click the OK button a third time
With this done, I made sure that my Explorer settings were correct by doing the following to ensure that a couple of settings for the .xls & .html file types are unchecked:
1. Open Windows Explorer
2. Navigate to: Tools | Folder Options | File Types tab
3. Highlight the Extension XLS (or HTML)
4. Click the Advanced button
5. At the botton of the screen are three settings that use checkboxes. If either of the following two are checked, un-check them:
Confirm Open after Download and Browse in same window
6. Click the OK button
7. Click the Apply button
8. Re-boot the PC
After I did this I was successfully able to get Excel to open from within Discoverer.
Best wishes
Michael

Discoverer Plus - Manage Link option is not working in Viewer

I am working on 10.1.2.3 Discoverer Plus. I have created one workbook with multiple worksheets (1 detail sheet and 4 Left Group Report.
I have created seperate links for 4 worksheets. Drill to Details is working fine in discoverer plus and parameter values passed as per the mapping in managed link option.
However, when I tried to access the report in Viewer, parameter values is not coming as per the mapping.
In detail sheet we have several optional parameters
from One summary Sheet, I am not passing all the values to the parameters in the detailed sheet.
Those column for which, I am not passing any value is coming as NULL (it should come blank as report is treating NULL as string), so no data found
- Sachin
Edited by: SachinK on Feb 26, 2009 10:58 AM

Thanks Lloyd,
Drill Down is working fine in Viewer and Plus.
Parameter's passed from one sheet to another is also working fine in plus but in viewer I have some problems.
Here are the details of the problem I am facing.
I have 2 Summary Sheets and 1 Detail Sheet
Sheet 1: 3 Parameters (Summary)
Sheet 2: 4 Parameters (Summary)
Sheet 3: 7 Parameters (Details)
When I am clicking on Sheet1 to Drill down 3 parameters are having correct values but the 4 parameters which can't be passed to Sheet 3 is coming 'NULL' (NULL string value) so detail report is not showing any data. Similarly for Sheet 2 4 parameters are coming as expected but 3 are coming as NULL.
When I am defining Manage Link Option, I am doing the mapping for 3 Column for Sheet 1 rest 4 columns are BLANK (no info).
I hope now my problem will be clear.
Thanks & Regards
Sachin
Edited by: SachinK on Feb 26, 2009 1:26 PM

Open Sales Order table with multiple schedule line....

YUSUF BHORI wrote:
Hi Experts,
In Sales Order there are multiple schedule line for single item.
Where and in which table i can find open qty for order ,material, item and schedule line items.
I Want open items for each schedule line. For One vbeln, posnr there multiple etenr.
Urgent,
Yusuf.

Hai,
Join VBAK & VBAP and store data in an internal table GT_VBAP to get Sales order numbers, items, materials.
Get Open Sales order items from VBUP into GT_VBUP where VBUP-GBSTA NE 'C'.
LOOP at GT_VBAP.
Read table GT_VBUP with key vbeln & posnr.
If sy-subrc <> 0.
delete GT_VBAP.
endif.
****Fill your Final Report Internal table with required field values **Append into that internal table
ENDLOOP.
Now Select WMENG BMENG from VBEP into GT_VBEP for all entries in GT_VBAP.
LOOP AT GT_VBEP.
*******Again Modify your Final Report internal table with these values
***VBEP-WMENG is Ordered Qty
***VBEP-BMENG is Confirmed Qty
************Open Qty = Ordered Qty = Confirmed Qty***
************Open Qty = VBEP-WMENG = VBEP-BMENG.***
ENDLOOP.
Edited by: Eswara Rao Aakula on Dec 24, 2007 9:56 AM
Edited by: Eswara Rao Aakula on Dec 24, 2007 9:57 AM

When I plug my ereader into Adobe Digital Editions it opens up multiple copies of books.

I'm having some problems with Adobe Digital Editions. When I plug my ereader into Adobe Digital Editions it opens up multiple copies of books. These are books I've either bought or am borrowing from the library. The books in some cases are no longer even on my computer (returned to library). Is there a way I can stop this? Do I have to uninstall then reinstall Adobe Digital Editions?

Please authorize ADE 3 with same credentials that you used with older version of ADE

Book file & Dropbox: Multiple people working on same book file

I am trying to use the book file and have run into multiple issues. We have saved the book file and all relevant InDesign files on dropbox. There are two of us who work on the book file at the same time. We have the book file open together but work on different files from the book, never working on the same file at the same time.
A few of the issues we have run into are as follows:
1. The book file does not show the InDesign files the other person added, when opening on a different computer.
2. When saving the book file, from the panel, it will tell us someone else saved the file and if we want to overwrite their file.
3. When working on of the files from the book and I try to save the file (ctrl+s) I get error messages telling me the network connection was modified by another process. InDesign then has en error message it needs to shut down and start back up to recover documents. After it starts back up it can't recover document due to error(11).
Has anyone used the bookfile with a cloud service, while multiple people work on different files for the book? For example, we want one person to work on the files 1-5 and another on 6-10 for the book file at the same time.

Only one person can work on a book file at the same time.
You cannot work this way on the files.
Person A adds a file to the book
Saves
Person B adds a file to the book
Saves
Persons B version overwrites Person A file.
Consider giving 1 person the duty of updating the Book File.
Only 1 person can work on a file at the same time - consider splitting files you're working on into folders
Folder>Person A
Folder>Person B
Add files that person should be working on.
Person in charge of updating the book file will update from both folders.
The way you're working will not work.

Work book taking longer time to open

Hi,
We created a workbook and embedded one input ready query in it. The query when executed separately takes 1 minute to load. But when the work book is opened for the same selections, it takes 3-5 mins.
There is no Macros written in the workbook and no functions are called while loading work book.
What might be the reason for this. Is there any way by which we can improve the performance?
Please suggest.
Thanks,
Seetharaman

Hi there,
Open BEx Analyzer.
Click on global settings (before opening the workbook) and mark the option "Repair workbook while running" (option available since BEx Analyzer support package 5 and above)
Now open the workbook (it will still take the 3-5 minutes).
Now save the workbook
Remove the option you have just marked before ("Repair workbook while running").
Close BEx Analyzer and test it again.
Diogo.

My app store won't work on my iPod Touch 4gen running on ios 6.1.5 and when I open app store it says "cannot connect to iTunes Store" i shut my ipod down and turned it back on but it still dosn't work but it will open on my Mac Book Air

My app store won't work on my iPod Touch 4gen running on ios 6.1.5 and when I open app store it says "cannot connect to iTunes Store" i shut my ipod down and turned it back on but it still dosn't work but it will open on my Mac Book Air. If sombody could tell me how to fix this that would be awesome!

Can't connect to the iTunes Store

How to open multiple worksheet by redirecting discoverer plus URL ?

Hi,
Version : Discoverer Plus 11g
I am able to open discoverer report with report workbook and worksheet from my UI screen by redirecting its URL.
This is done by providing URL input parameter opendbid (workbook id) & sheetid (worksheet id of the workbook).
http://host:port/discoverer/plus?cn=<+cnname+>&opendb=<+reportname+>&opendbid=<+workbookid+>&sheetid=<+worksheetid+>
Now I have two reports in which there are two worksheets generated in single workbook.
I want to open this report also by redirecting above URL from my UI screen so what I have to pass in worksheet id for multiple worksheets.
regards,
devang

Hi,
You cannot do this. You open only one sheet at a time from a URL.
Rod West

How do I insert views in work book (Multiple)?

Hi Jr,
I have managed to get my work book with multiple queries in it. which is working fine n the credit goes to your answers in the forum.
Now I want to insert views instead of queries. when I tried to do so it is giving me some critical error.
Can you please explain me how do I insert multiple views in a workbook?
Thanks and Regards,
Sekhar.

Hello Chandran,
Thanks for your reply. It is working fine now.
Now I want to insert VIEWS in the place of queries in one workbook. When I tryed to do that its giving me a critical error and closing the Bex. Can you please explain me how do I insert query Views in to one work book?
Thannks and Regards,
Sekhar.

Multiple Schedule Agents for One Work Repository

Hi
Does anyonem know if it should be possible to have multiple schedule agents running (on different machines, with different names, ports etc.), but all agents use the same master and work repository (defined in odiparams.sh).
I seem to be having a problem with this set up. Only one of the schedules is working. I can add schedules to any of the other agents, but when I go to update scheduling (in TM) and then view the schedule, odi tells me it is unable to retrieve the schule information.
This error is usually caused by either empty schedule, or odiparams.sh connection information not being set correctly. But in my case it must be correct as I can see items in one of the schedules.
Thanks

Hi,
I don't really know if multiple Scheduler agents on the same repositories is possible.
But I just can say that I have the following message too : "unable to retrieve the schedule information".
This message appears each time I try to view the schedule.
I have tried to correct things to avoid this message but it always appears.
At the end all my scheduling works fine so I let it.
Moreover when this message appears if I click ok it loads me the calendar with all the scheduled tasks of the period.
So my question is, what do you see when you click Ok after the Warning message occurs ?
Do yo see the scheduling planning empty ?

Work Book is not opening

Hi,
any one encounted this type of situation with Work Books.
I am using BI 7.0, BEx 7.0.
I have a Work Book with 30 sheets each sheet has one query.
Today after saving the work Book ,
Now when i try to open the work Book it is not opening.
I don't no what is the Problem.
When we open the work Book
in status bar i can see BEx Analyzer is Processing then
after some time status is Ready,
But work book is not opening.
I am really wondering the behaviour of BEx,
I saved the Work Book now and it is not opening.
Help me to resolve this issue, sure I will assign points.
Thanks
Prasanna

Hi,
after searching in SDN ,
i found Function Module RRMX_WORKBOOK_LIST_GET
then I check in system in FM, it is showing the workBook.
but my Problem is how to Open my Work Book ?
any Idea will be appreciated with points.
Thanks
Prasanna

Opening Multiple open multiple Scheduled work book in Discoverer plus

Similar Messages

Maybe you are looking for