Opening Multiple Reader Files Stacked and Aligned

I know it's a strange request but...
A coworker of mine is wanting all of the Reader files that she opens to have each Reader window aligned and stacked on each other instead of them cascading or randomly arranged. These are all the same size documents and the layout is the same but just different content for each.
I have tried changing the preferences under Open Settings in "Documents" to "check Restore last view settings when reopening documents". But it isn't working.
Anyone else require this or know how to make this happen?
Jim

I don't believe you have any control over this.

Similar Messages

Unable to open multiple PDF files in Acrobat 9 Pro - Vista

I have a staff member that is unable to open more than one PDF at a time. If a PDF is currently open and another one is selected the program will crash and close. It gives a message stating the program has crashed and must be closed and also gives an option to check online for a solution. Has anyone else seen this issue or know a fix for it? Thanks in advance.

No. Starting with Acrobat 9 it is no longer possible to open multiple PDF files in the same window.

Open Multiple PDF files from Production order/Routing

Hi Everyone
We are in ECC 6.0 environment. We have a scenario where multiple documents were attached to single operation and also at multiple operations. But when I was trying to open these PDF documents, only the last file was getting opened and closing the previous file. How can I open multiple PDF files at one time from Production order or Routing?
Any help is appreciated.
Regards
Prasad

Hi Prasad,
from DMS standard I regret but such a functionality is not available. In the standard originals can be opened only one after another.
I think for realising this functionality an individual modificatoin is necessary.
Best regards,
Christoph

Not opening multiple RAW files

If i open a Raw file in Bridge, it opens up perfectly. Also my jpegs and tiff open in RAW, so no problem there. The problem is, that I cannot open multiple Raw files from Bridge into Raw with the option "open in Camera Raw" So the shortcut cmd+R ( I am on a mac) does not work. It says that Raw has to be opened at least once. I have been using Raw for years now so it has been opened multiple times.
I Can not seem to find a solution. I would really like to open up multiple edited Raw files at once, and in Raw give the order to rename them into JPEG. If you do that, you see Photoshop CC and a window that says how many convertions are left. So far so good... but before, I was able to open up some new raw files in Camera Raw without having to wait for Photoshop to convert everything. Now I have to wait for a long time before I can make my new Edits. Can somebody please help me?
I am using all updated software.
Ben

Hello SSPRENGEL,
Thank you very much for your reply. My apologies for the mess up with RAW and ACR naming.
The situation is, that I can not open any file with CMd-R. I can open single files with CMD-O. But I need to open multiple files at ones with CMD-R. It used to work good.
The problem is, That I am in the business of school photography. I take the pictures as RAW files on an Nikon camera (nef) After I ajust all the pictures, I have to rename all of them to JPEG, just to get them online.
I used to do that with ACR. But now the problem is, if I open a lot of picures with CMD-O, It opens up very good in ACR and I still can give the command to save all of these as JPEG. It workt great, but I have to wait a looooooong time before I can open up my next batch of pictures and start to adjust those. Normally, it would save the files as JPEG and I was able to open up a new batch of pictures in ACR right away. That saves me A LOT OF TIME. This only works if you can open the files with CMS-R. Strange...
I updated my I-mac to 10.9.1 so I see that is not the newest. PS-CC is 14-2-1 x64 and I am using the beta ACR for now (8.4)
I just tried to open a RAW file in photoshop with the normal open command and it lauches ACR perfectly. But again from within Adobe bridge I still get the same error about needing to open a qualifying product at least once.
Stange isn't it?
Thank you very much for your time!
Ben

How to open Adobe Reader file from another native IOS application?

There is an existing thread, but I want to re-open it because I think this is an important feature that we need badly. I was wondering if there is any plan to add this feature so we can open PDFs directly into Adobe from the web / other apps.
How to open Adobe Reader file from another native IOS application?
Basically, we just want to use a custom URL scheme to open a specific document in the App. Currently, this only opens the app but does not load the file.
APB

Not to hijack the conversation but I can explain why this would be useful for both the above case and another.
What I believe Pavel is talking about is setting up a "URL Scheme" for the Adobe Acrobat iOS application so that you can easily open a PDF specifically in Adobe Acrobat iOS from other native applications and even from web applications opened within Safari. This is particularly useful if your application requires some of the specific features in Adobe Reader iOS to grant them the best experience possible and you want to encourage this.
Another case: If you're using Adobe Livecycle's document security modules (that encrypts PDF files so that Adobe Acrobat must "phone home" to decrypt and view the document), these PDF's can only be viewed inside the Adobe Acrobat application and appear as blank in most other PDF readers. Having a URL scheme allows your application utilising this functionality to have a 1 click step to view the PDF rather than the current non-user friendly process:
- Within Safari, touch the PDF link (appears as blank in the default Safari PDF reader, which in itself is confusing)
- Touch "Open in..."
- Touch "Adobe Acrobat"
We have an immediate need for this functionality for the example above. I can resubmit it in a separate post if necessary.

How to open multiple sql files in only one ssms instance

how to open multiple sql files in only one ssms instance, I can't get anything to work that I find online..I hope you can help us.

I tried opening two files but selecting and hitting enter. it opens one SSMS and two tabs.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Cannot open adobe reader files.....because it was not a supported type file.......

Cannot open adobe reader file............could not open because it was not a supported type file...........or damaged by email.... What support does it need????

Impossible to say. All we can know is that it is NOT a valid PDF file.
You could take a look. Try this.
1. Open the file in Microsoft Word (or NotePad).
2. If the file is good, use it - it was a Word (or text) file.
3. Otherwise, look at the first few lines. These will probably be gobbledegook.
4. Copy and paste the first few lines into your reply, perhaps someone will recognise what the file really is.

Opening multiple movie files to play sequentially.

Currently, if I highlight several movie (e.g. .avi) files in a Finder window and then double-click on one of them, each of the files is opened in a separate QuickTime window and if I have "automatically play movies when opened" QuickTime preference set, then they all start playing simultaneously!
How do I change it so that opening multiple movie files results in them being played sequentially in a single window?
P.S. I have "Open movies in new players" preference is disabled.
P.P.S. For image files it all works correctly - they are opened in Preview and I get an option of starting a slideshow...

Hi,
I'm not on a Mac at the moment to test, but I could have sworn you used to be able to open one movie, pause it and then drag and drop subsequent movies onto that window to append them to the end.
Give it a try. Sorry if I've been imagining things though

My Mozilla Firefox Browser v15.0 open then some file loading and my desktop display automatically created folder name is old Firefox data then ask me chose two

''duplicate of https://support.mozilla.org/en-US/questions/936244 - locking this one''
'''My Mozilla Firefox Browser v15.0 open then some file loading and my desktop display automatically created folder name is old Firefox data then ask me chose two option 1st is Safe Mode or 2nd is Restore so i chose Restore and then open Mozilla Firefox Browser page Blank Black display page,
How can i do solve this error plz plz plz plz help me out what you say troubleshooting,error or issue.'''

Did you perform a Firefox Reset either by clicking the button on the Help > Troubleshooting Information page or via the Safe mode start window?
You may have gotten the Safe Mode start window as the result of not being able to start Firefox more than once after crashes.
See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location bar, like you open a website.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
If you can't open Firefox then see:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
"Reset" creates a new default profile with a time stamp appended to identify it and tries to recover settings like bookmarks and history and passwords and cookies and auto-fill data from the old profile, but you lose data like extensions and other customizations.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Firefox 15+ versions will move the old profile folder to an "Old Firefox Data-##" folder on the Desktop that gets a number appended if you use reset more than once, so you can no longer use the profile manager to revert to the old profile.

How to open adobe reader file in adobe pro xl?

how to open adobe reader file in adobe pro xl?Downloading, Installing, Setting Up

Moving this discussion to the Acrobat Installation & Update Issues forum.

I Am Using Photoshop CS5 - I Used To Be Able To Open Multiple SINGLE Files - Now They Over Lap - What Do I Do ¿ - How Can I Reboot My App To My Original Settings ¿

I Am Using Photoshop CS5 - I Used To Be Able To Open Multiple Single Files - Now They Just Overlap As One File ! - How Can I Fix This Or Reboot My App To My Original Settings ?

In Preferences UNcheck Open Documents as Tabs

Open multiple pdf files using Acrobat Reader?

Can we open and switch between multiple pdf files using Acrobat Reader?

Of course, but if it's Reader X or later each file will appear in its own window. This can't be changed.

Open multiple .indd files

Hello,
usually when I have to ask for opening a single .indd file I use something like this:
fileToOpen = File.openDialog("Open a document");
myDocument = app.open(File(fileToOpen.fullName));
But what if I have to open multiple files at once (eg. selecting them from the Desktop)?
I read from the Indesign object model that the "open" function of the "application" object can accept an array of files.. am I right?
Thanks in advance

@lglmrc – the openDialog() method comes with another argument for opening multiple files. That argument is set to "false" by default.
Setting it to "true" is the key here:
var FilesToOpen = File.openDialog("Open one or more documents", true);
for(var n=0;n<FilesToOpen.length;n++){
app.open(FilesToOpen[n]);
Alternatively there is the openDlg() method, that also comes with the second argument.
See also:
http://jongware.mit.edu/idcs6js/pc_File.html#openDialog
File openDialog (prompt: string[, filter: any=null][, multiSelect: bool=false])
Opens a dialog so the user can select one or more files to open.
Opens the built-in platform-specific file-browsing dialog in which a user can select an existing file or multiple files, and creates new File objects to represent the selected files.
• If the user clicks OK, returns a File object for the selected file, or an array of objects if multiple files are selected.
• If the user cancels, returns null.
Uwe

Suddenly can't open multiple image files in CS5

I recently transferred LR 5.3 and CS5 (12.04x64X) onto a new PC (OS Windows 7 64-bit). Both programs are working fine individually. And single images in LR open just fine for editing in CS5. But when I try to open multiple images (to merge as a panoramic) or open multiple images as separate layers, nothing happens. CS5 opens on top of LR, but the files themselves never open. No problems doing this a few days ago with my older computer (same programs, same operating system).
Any suggestions for fixing this would be much appreciated.

When you say nothing is showing up, do you mean it is as if you didn’t use File / Open, or is it more that there is something but it is gray or white or black without any image detail? If the latter, perhaps something like a video driver update or system-level change has made things incompatible with how PSE11 tries to display images.
Have you rebooted?
Have you reset your preferences? You can do this by holding down Ctrl-Shift-Alt at the same time while PSE11 is starting up (or at least while the editor is starting up) and you’ll get a message about deleting the preferences file or not before you see the splash screen. Various other key combinations will ask for an additional plug-ins folder or a different scratch disk location. If you are going to delete your preferences file you might want to review the settings, first, in case there is something important you need to reconfigure once the preferences have been reset.

Bug in Preview in Snow Leopard when opening multiple pdf files at once

I receive 50-200 pdf files by e-mail each day. I have historically saved the pdf attachments to a folder, then selected all the pdf files in the folder (CMD A), then opened all the selected files in Preview (CMD O). After updating to Snow Leopard, downloading 34 pdf files to a folder, selecting them all, then attempting to open them all in Preview (using both CMD O, then File/Open, then File/Open With), the effort first opens 6 of the 34 files. Closing all then trying again results in 7 files being opened, closing all then trying again results in 8 files being opened, etc etc. Earlier today I had the same results, but eventually got a message asking if I wanted to open all in separate windows (I did) or a single window, and it opened all the files at once as I wanted. After shutting down, moving home, and receiving additional pdf files, however, back to the same open 5, then open 6, etc. problem. Anyone else having this problem or a suggestion on how to resolve?
Thanks for suggestions,
B

More info - apparently the bug isn't related to Preview, but to the attempt to open all pdf files in the folder with ANY program. After having Preview open 25 of the 34 files I was attempting to open, I then tried opening all 34 with Adobe Reader. It opened 26 (after Preview had opened 25). Tried again with Preview - it opened 27, then 28 with Adobe Reader. It doesn't necessarily open the FIRST 25 (or 26, etc) either, so it's difficult to work with the open ones, then go back and work with the remaining ones later.

Opening Multiple Reader Files Stacked and Aligned

Similar Messages

Maybe you are looking for