Opening Old Version of website causes crash

I open an old version and I get a warning about changes made and asked to Ignore or Review. Neither button works. Have to force quit.
I need to see and grab some older content.

Hi Barry,
Could you try the following steps:
1. Close Muse
2. Go to http://5534495.businesscatalyst.com/, right click on the MuseLogPrefs.xml link, and save the file to your Documents folder (~/Documents on Mac)
3. Launch Muse and go through the steps above (open the .muse file, select review, select ignore, force quit)
4. E-mail the file MuseLog.txt in your Documents folder to [email protected] (with a link to this thread)
Thanks,
Abhishek

Similar Messages

TS3074 Hello anyone with Windows 7, not sure why having followed instructions above, install of latest version of itunes won't work and can no longer open old version either. anyone help with this?

Hello anyone with Windows 7, not sure why having followed instructions above, install of latest version of itunes won't work and can no longer open old version either. anyone help with this?

Hi,
thanks for your reply.
Yes, except n°1 - empty Temp directory, I had tried/checked all of those.
I emptied the local temp folder tonight, but it still won't work.
Please note: the installation doesn't give me any problem. The program was working fine, until at one point *plouf* it stopped working. I can re-install it without any problem, it just crashes when opening.
\\edit\\ I seem to have located the problem, it's in the library files. If I re-install iTunes without my library, it works fine (though there is no music in it, yet). As soon as I import my library, or replace the My Music\iTunes folder with the old one, it stops working.

How do I stop Firefox from opening old tabs/windows after a crash?

whenever it crashes and i try to reopen the program, it opens all my old tabs and windows. often these are videos which all start playing at once. or worse, it opens the page that made it crash in the first place and crashes again.
how do i stop this annoying feature?
if there's no way to stop it, can you recommend a simple browser that doesn't try to think for you?

hello, enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''browser.sessionstore.resume_from_crash'''. double-click it and change its value to '''false'''.

Ipad opening old versions even though deleted - can't view new versions!

I am designing and creating iBooks and need to show them to my editor to before they are finished - I export them, upload to drop box and she downloads them onto her iPad 3 Version 6.0.
When I make the necessary changes, i duplicate the file, rename it, and re upload to dropbox. ie 'Joe Blogs 2', that way I have many versions to refer back to if necessary, and i label each one on the cover to save confusion.
Since the new update for iBooks Author we have had some pretty big problems, I have edited, exported and uploaded the books as usual, my Editor has downloaded them onto her ipad, but every time we tap on the new title to open the book 'Joe Blogs 2' it opens an old version 'Joe Blogs 1', even if the old one is deleted from the ipad, also, even if we upload a completely different book it still opens 'Joe Blogs 1' I have changed the titles, and file names and it has made no difference. we are both using iBook latest update.
NOTE: All books were created from an original template created in iBooks Author version 1, from the 'Basic' template. I have been using this template because I don't know how to recreate it - the are no chapters it starts with 1 page then has sections so that it ends up with a table of contents which looks like this, which means that the 'chapter' (section) title can be tapped and go straight to the section, which is something I would lose if I started the books from scratch (which I obviously don't want to do)

Thank you for replying, and for the tips on templates, that makes a lot of sense - i have now created a template from the original book, and saved it as a template (I cannot make the template from scratch as I do not know how, as I explained, to make a contens page that functions like the one in the picture)
Unfortunately, this has not solved the other problem
Just to check we are on the same page (no pun intended) what I have been doing is this;
• To start a new book: opening 'contents page', a template i have created (and saved as a template, so I get it from the welcome screen on IBA 2, as opposed to opening an existing file and duplicating it.) use that template to create a new IBA file, ie 'Maslen and Mehra 1' which I save, export as 'version 1' when prompted on IBA v2. then I add this to drop box.
after my editor has downloaded and seen it, I make changes, then duplicate and save as ''Maslen and Mehra 2' to show to her again. then I make make changes, duplicate, save, make changes, duplicate, save... up until 'Maslen and Mehra Final Proof (9)'
since the new IBA update every time she tries to open a new file, the last one I sent her before the update opens (which is really old now as we have made a lot of changes, on our current book we are on version11 but version 3 opens!. Thinking that my template might be the problem I did the following:
• started from scratch: chose an bulit-in IBA template, put a 'A' on the cover, saved it as 'A', exported it, added it to drop box. my editor downloaded and opened it fine.
• changed the 'A' to a 'B' on the front cover (did not duplicate the file) exported it, I changed it to 'version 2' when prompted, saved the .Ibooks file as 'B' and uploaded it to drop box. My editor dowloaded it fine, and it appears in the library but When my editor opens it 'A' opens instead.
• Started again (with a completely different built in IBA template) repeated the process, new book 'A' again worked fine, but this did not change to 'version 2'. same problem. new book 'B' opened as new book 'A' again.
• Started again (again with a completely different built in IBA template) this time duplicated 'A', named it 'C', saved, exported 'C' and 'A' still opened even though 'A' is a different file!
• tried changing the meta-data file title, repeated the process, made no difference.
• tried different drop box account, didn't make a difference
• she tried restoring her ipad, still made no difference
• my editor cannot view IBA files (only .ibooks) so we cannot get around it that way...
so my current issues:
• My editor and I need to find a way we I can create a book, send her a copy and make changes, and send her a new copy, whether by duplicating it or even by re-exporting the original document (and saving a copy as a spare) - but neither currently work - why is this so difficult? this was not a problem before the update, she could have multiple books with similar filenames, all orginating from the same file. (which I now know is not the correct way, but even using templates has not made a difference)
• regarding templates: have I missed somewhere that you can make a template from scratch? I thought the closest you could get was to choose an existing template, delete everything then 'add section/chapter' if I go to 'New' in ibooks author then it still just takes me to the template page so I have no choice but to choose one of the IBA templates or one of the ones I have created myself, given the choice I would always rather start from scratch and a blank page anyway! :-)
Thankyou again

Updated Muse CC to 8.0 from a previous version. It opens old version??

I just updated Muse CC to 8.0 from a previous version, now when i open Muse cc, it asks me if i would like to update to the new version. Why will it ask me if i updated it already.
I looked in my Creative cloud Desktop control center and it shows two apps for muse.
1. Muse CC
2. Muse CC (2014)
All my updated apps have two versions like the above example.. Weird??
I restarted my computer hoping to get a refresh, but no luck. Please help. Thank You!

I saw the same thing - I had Muse and Photoshop permanently in my task bar, and when I downloaded the 2014 update, the link remained with the old version. I just deleted that button and affixed the links to the new ones on the task bar. I'm not ready to uninstall the old CC versions yet, though, just in case.

Unable to open old version of timeline

I worked on a timeline left for 5 min. when I came back the timeline was shiefted around mixing titles clips and erasing some...so, I am trying to open older versions that failed to open...what can I do...i am freaking out..

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Oss-old version + new update causes MAJOR problems....................

hey all...
if ur experiencing quitting apps, probs w/ itunes7, etc, and u have oss (ANY version), get rid of it immediately.........
the new updated version is even worse than the original.....
goto the uninstaller or delete it with appzapper (if u can get it to stay open...)
gl...............

I have done that, several times.
So this is where I'm at now - last night, immediately after finishing a movie that was on my WD hard drive, which holds all of my media, music, movies - I restarted my computer and then it would not read the drive. It said it was unreadable.
I brought the Mac and the drive into an apple store today - they said basically it was my hard drive causing the issues. I used my iPod classic as my media back up as the 160 gb could hold all my stuff. Well, as I mentioned previously, that can't sync and I restored it, with no success. So in essence I lost my media drive and the back up. Tough to swallow, I'm angry, I think it's still mountain lion causing the drive to fail.
So I resolved to go home and restore my computer to one of my time machine back ups and do a Snow Leopard reinstall. Well, the moment I returned from the apple store, the time machine drive is now listed as unreadable. I called support, spent hours with them - I now have two drives which fried within 10 hours of each other in the same error. The senior support manager agreed it sounds like mountain lion is indeed corrupting my drives somehow. My iMac currently won't start into the recovery disk. So I went out spent $200 to get a new hard drive, which I am now backing up my data onto with a new Time machine.
In the last week, I've lost my iPod classic, iPhone 4, two external hard drives and now possibly even the Mac itself. I'm going to install snow leopard and see if it alleviates any of my issues, or hopefully can read my drives. I truly believe Mountain Lion is the problem.

Safari opens local version of websites.

Hello,
safari in my iphone 4 is being really annoying. When I open a website like askmen.com, it will
take me to the homepage, but as soon as I go to any page other than the home page, it turns it into the Dutch version of the website, which I don't want. I have tried turning location services off, but that doesn't help it. Does anybody know what to do?

I had the same problem. Two days ago I could log into hotmail through the safari browser and it was fine. Now www.hotmail.com logs me into the mobile version which I cant see anything but words. After hours of fiddling around, I figured out what others were talking about. If you go to the Settings, then Mail, Contacts, Calenders and under accounts touch "Add Account". Go down to "Other" and you can add your hotmail account. Then your emails come into your mailbox instead of having to go to the browser. Only drawback I find so far is that if you click on a link, it opens up the browser and then you have to go back to mail, On the other hand, I dont have to keep enalarging the screen so I can touch on the little box to be able to delete the junk. Just have to hit the little trash can and it ***** up the deleted email! Still do not know why this method changed in two days, but I found nothing helpful on the MSN/Hotmail help website. Hope this helps you and everyone else who had this problem!
Message was edited by: dmbechtold

Batch File - Replace old version

I have a Word document that I have created which contains several macros. This file is copied by other employees into different folders on the file server for them to use. I often make admentments to the master copy and have to email this to everyone
asking them to replace their versions with the latest. This often doesn't happen meaning they are using an old version which can cause issues.
What I am trying to do is create a batch file that I can run overnight that will search the file server (basically every folder and subfolder where the batch file is created - nothing higher) looking for an old version and replace it with a new
version. The file name contains the version.
I have been using the below but it does not seem to be working.
for /F "tokens=*" %%P in ('dir /b /s "Menu v1.9.docm') do copy /Y .\"Menu v1.10.docm" "%%P"
@Pause
This is not something I have written myself as I don't normally write batch files.
Can anyone help?

I think somebody need to learn the basics of Windows. You need to take some responsibility for understanding and writing your script.
¯\_(ツ)_/¯
I'm not sure if i would call creating a batch file the basics of windows.
I'm trying to understand it as best as I can. I have changed it a bit to see if I can solve it but just can't, hence why I am asking for help. I understand the process of it and most of the code but not things like Loc=%dI%~pI
Yes - learning would be helpful. Try the help. SET /?
I also suggest that, since you are not a trained batch scripter, that you learn PowerShell as it will be easier to understand. Batch is pretty much obsolete except for those of us that like to play with it. Iztislike jugging with both hands tied
behind your back.
PowerShell just works and it is much easier to learn.
But, as you wrote in your initial post, you are not a technician and don't care to learn. You want someone to do it for you. I recommend looking for a consultant as they will be able to work closely with you to try and get you what you want.
My suggestion is to stop inventing things without a good understanding of how to manage these things in a computer environment. This solution is built into MSWord if only you would learn how to use it. Word has global and group templates that
can be changed in one location and will effect every copy of word in the network. A good office consultant can show you how to use MSWord correctly. You are using it like a fancy copy of notepad. Why spend 300+ dollars per copy if you are
only going to use it like notepad. Notepad and Wordpad are free.
Office is used everywhere because it does all of this for you. You do not need to "sneakernet" a solution.
¯\_(ツ)_/¯

Unable to Preview the Old Version Dashboard in Xcelsius 2008 sp4 fp4.1

Hi,
Recently we updated the Xcelsius and Live office.
Previous Versions:
Xcelsius 2008 sp3 fp 3.6
Live office 3.1
Update Versions:
Xcelsius 2008 sp4 fp4.1
Live office 3.1 sp3 then sp5
So now i am using Xcelsius 2008 sp4 fp4.1 and Live office 3.1 sp5.
Operating System:Windows Vista sp2.
Problem is i am able to open old version of dashboards( which was developed using Xcelsius 2008 sp3 fp 3.6 & Live office 3.1) in new version (Xcelsius 2008 sp4 fp4.1 & Live office 3.1 sp5) but i am not able to preview the dashboards. Xcelsius is not able to generate the Swf.It's is not throwing any error but swf generation process is keep on going.
Note: We install same Service Packs & Fixed packs Windows 7.It's working fine.
Please help me.
Regards,
Rajesh Reddy

Hi
Have you checked the PAM in the Service Market Place as I don't see Windows vista SP2 as supported only
Windows Vista
Windows Vista SP1
Regards
F.

How to keep old versions of apps before updating

I may want to retain the old version of some of my apps. On my Mac whenever I download updates to software, I always keep the installers for the old versions, just in case. However on iOS, when you download an update, it unceremoniously erases your old version, which has caused me to lose data in some cases!
I noticed that in iTunes, "Transfer Purchases" moves the current .IPA files to your Mac. I've also noticed that when you "Transfer Purchases" again, the new versions replace the old versions, which get moved into the Trash (but not fully deleted yet). I've started keeping folders of old versions of apps. You can then manually put those older versions back into the proper folder and resync them to the iPhone if you liked the old version better
I wish the iOS let you roll back to the old version of the app, in case the new version breaks something (like Time Machine for iOS). I think I'm going to write a letter to Apple

That is correct Dancingjewel. Migrating/transferring/copying Adobe applications is not supported and often leads to unexpected behavior. To resolve this you will want to attempt to completely remove the current installations utilizing the CC Cleaner Tool and then reinstall. If you need a fresh copy of the installation files they are available at Other downloads.

Lion OS - I cannot open old Word Documents

I have recently installed Lion OS. I can no longer open old versions of Word Documents (.doc) in Office 2011
I have tried to install the Service Packs 14.0 and 14.02 but I get the message that "essential software is missing." I have tried to run Software Update, but "all my software is up to date". I have also tried to re-install Microsoft AutoUpdate (successfully). But still no joy....
What do I do?

Pages 5 will not open Pages '08 files or earlier.
Pages '08/'09 should still be in your Applications/iWork folder. Use that.
Peter

My browsers (safari and chrome) continue to open an old version of a website. Even though I've cleared my browser history and cache. Please help! what else can I do.

My browsers (safari and Chrome) continue to open an old version of a website - even though I've cleared my browser history and cache. It's essential I see the newly launched site - rather than the old ones. It's strange it's happening in both browsers.
Please help!

You, or someone using your computer, hacked the system to redirect certain URL's. The file modified is /etc/hosts.
The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below. Please read this whole message before doing anything.
Back up all data. This is a simple procedure, but if you don't follow the instructions exactly, you could be left with an unbootable system. In that case, you'll have to restore from a backup or reinstall OS X.
If you have more than one user account, you must be logged in as an administrator.
Triple-click anywhere in the line below to select it:
open -a TextEdit /etc/hosts
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
fe80::1%lo0                    localhost
Below that, you'll see some other lines. There should be nothing above the first line "##". If you have any doubt about that, STOP and ask for guidance. Make sure you scroll all the way to the bottom of the document. Scroll bars are hidden by default until you actually start scrolling, so you may not realize that you’re not seeing the whole document.
If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
sudo sed -i~ '11,$d' /etc/hosts
This time, you'll be prompted for your login password, which won't be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Quit Terminal.
That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

Firefox always shuts down/crashes when I am trying to print something. Why is this and how do I fix it? Went back to old version so I can print things, btw it is all printing in any website including emails.

Does not matter what website, email or pop-up and try to print something. After you click okay on the print pop-up window it shuts down. The old version does not do that, so this tells me it is Version 4 that is the problem.

You can use the NoSquint extension to set font size (text/page zoom) and text color on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
See also:
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

Remote Desktop MAC version 8.0.5 crashing when opening format panel in Excel

Remote Desktop MAC version 8.0.5 crashing when opening a format panel in Excel. Attempt to reconnect via RDC do not work until you log into Windows direct and close the formatting window. I'm running Windows 7 Pro, Service Pack 1 and using Microsoft
Remote Desktop version 8.0.5 on a Mac running OS X 10.9.2. Reproduced error 3 times. Has also twice caused Excel to crash, so error does seem specific to the Windows environment and/or interaction with RDC (i.e. - not Mac related).

Hi,
Would you please provide us the log file for check after issue occurs.
Microsoft Remote Desktop -> About Microsoft Remote Desktop -> Send log via email -> Copy and paste the log here.
Thanks.
Jeremy Wu
TechNet Community Support

Opening Old Version of website causes crash

Similar Messages

Maybe you are looking for