Opening Oracle Database in window

when I follow this instruction to open the program:
On Windows, from the Start menu, select Programs (or All Programs), then Oracle Database 10g Express Edition, and then Go To Database Home Page.
The result displayed 'the Internet Explorer cannot display the webpage' and address bar has: http://127.0.0.1:8080/apex
How to open this program correctly?

Hi,
When you installed the Oracle XE what was the password that you informed for SYS and SYSTEM users ?
eg:
C:\>sqlplus system/manager where manager is the password for the SYSTEM user.
Cheers

Similar Messages

When I opened Oracle Database Configuration Assistant....

hi all,
when I opened Oracle Database Configuration Assistant(9i,windows) to chose ORCL database to configure,it told me:
ORA-01078L failure in processing system parameters.What is that.thank u for your response.

bash-2.03$ oerr ora 01078
01078, 00000, "failure in processing system parameters"
// *Cause: Failure during processing of INIT.ORA parameters during
// system startup.
// *Action: Further diagnostic information should be in the error stack.
Not enough to go on, but that is what oracle is saying.
William

Is possible Oracle Database on Windows Cluster without FailSafe ???

Hi Guys,
I have one doubt that can we have Active/Passive Oracle Database on Windows (2k3/2k8) Cluster without installing FailSafe Software ???
Can we have the .bat Scripts for resource moving from Active Node to Passive Node in case of failure, like the way we have in Unix environments...
yours feedback would be appreciated...
Regards,
Manish

user12273645 wrote:
Hi Anand,
Can we create a oracle service for already running database? If so can you please guide me how to perform.
Thanks,
DasarathIf your service does not exists or not running its mean your database actually is not running.Create new service using oradim for example
C:\Documents and Settings\chinar>set ORACLE_SID=SB
C:\Documents and Settings\chinar>oradim -new -sid SB -intpwd sm -pfile D:\oracl
e\product\10.2.0\admin\SB\pfile\init.ora.51200910857
Instance created.
C:\Documents and Settings\chinar>sqlplus "sys/sm as sysdba"
SQL*Plus: Release 10.2.0.2.0 - Production on Fri Aug 27 10:57:55 2010
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
SQL> startup pfile=D:\oracle\product\10.2.0\admin\SB\pfile\init.ora.51200910857
ORACLE instance started.
Total System Global Area 159383552 bytes
Fixed Size                  1288292 bytes
Variable Size              62916508 bytes
Database Buffers           88080384 bytes
Redo Buffers                7098368 bytes
Database mounted.
Database opened.
SQL>

Does Oracle database supports Windows server 2012?

Does Oracle database supports Windows server 2012? If not, when it will be supported?

Hi;
Oracle not certified wiht win8 or win2012. Please check below note:
Oracle - Compatibility Matrices and Release Information [ID 139580.1]
11.2.0.x Oracle Database and Networking Patches for Microsoft Platforms [ID 1114533.1]
Statement of Direction: Oracle Database 11g Release 2 - Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
Certification Information for Oracle Database on Microsoft Windows (64-bit) [ID 1307195.1]
Certification Information for Oracle Database on Microsoft Windows x86 (32-bit) [ID 1307189.1]
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

Is there any oracle database for windows 7 64 bit

hi,
can any one tell me that is there any oracle database for windows 7 Home Basic 64 bit ( version 6.1).
I have downloaded several versions oracle databases but none have worked.
Thanks

Hi;
The answer is No as mention before. Please use certified platform which is mention in installation guide:
Operating System Oracle Database for 32-bit Windows is supported on the following operating systems:
Windows Server 2003 - all editions
Windows Server 2003 R2 - all editions
Windows XP Professional
Windows Vista - Business, Enterprise, and Ultimate editions
Windows Server 2008 - Standard, Enterprise, Datacenter, Web, and Foundation editions. The Server Core option is not supported.
Note: Check My Oracle Support (formerly OracleMetaLink) for more information about Hyper-V support.
Windows 7 - Professional, Enterprise, and Ultimate editions
Windows Multilingual User Interface Pack is supported.
Check:
http://download.oracle.com/docs/cd/E11882_01/install.112/e16773/reqs.htm#CHDHGGFE
Regard
Helios

Symantec antivirus Best practice for oracle database on windows server 2003

Hi all,
I have an oracle database server on windows server 2003 platform of version 10.2.0.4. what would be best practice of running symantec antivirus on that server as well as database file exclusions from scanning them.
My server had rebooted unexpectedly for many times. in event log i have id as 6008. what may be cause of it..?

Normally, you don't run a virus scanner on a database server because your database server isn't vulnerable to viruses. It's behind firewalls, people aren't reading mail on it, people aren't plugging thumb drives into it, etc. If you do decide that you need to run a virus scanner on a database server, at least exclude the Oracle data files from the scan. Oracle gets very unhappy if someone else tries to open its data files (or, worse, if someone opens a data file before it gets the chance to acquire exclusive access).
Justin

Error while opening Oracle Database 11g Express Edition after installation.

After finishing the installation of Oracle database 11g Express Edition, when I tried to open it, it shows following error : windows cannot find `http://127.0.0.1:%HTTPPORT%/apex/f?p=4950`.Make sure you typed the name coorectly, and then try again.
What the above error means? I followed the installation steps as given in the link.

Hi,
Follow thread may help you.
<<Newbie on running Oracle 11g - Windows cannot find http:something
Regards,

Oracle database on windows without oracle service

Hi Gurus,
I noticed that one oracle database exist on Windows server without oracle service.
Is this possible to create a database without service on windows server?
What would be the next step to create a service for the existing databse.
Please help me out on this.
Thanks,
Dasarath

user12273645 wrote:
Hi Anand,
Can we create a oracle service for already running database? If so can you please guide me how to perform.
Thanks,
DasarathIf your service does not exists or not running its mean your database actually is not running.Create new service using oradim for example
C:\Documents and Settings\chinar>set ORACLE_SID=SB
C:\Documents and Settings\chinar>oradim -new -sid SB -intpwd sm -pfile D:\oracl
e\product\10.2.0\admin\SB\pfile\init.ora.51200910857
Instance created.
C:\Documents and Settings\chinar>sqlplus "sys/sm as sysdba"
SQL*Plus: Release 10.2.0.2.0 - Production on Fri Aug 27 10:57:55 2010
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
SQL> startup pfile=D:\oracle\product\10.2.0\admin\SB\pfile\init.ora.51200910857
ORACLE instance started.
Total System Global Area 159383552 bytes
Fixed Size                  1288292 bytes
Variable Size              62916508 bytes
Database Buffers           88080384 bytes
Redo Buffers                7098368 bytes
Database mounted.
Database opened.
SQL>

Oracle database on windows

Hi, I have installed oracle 11g on windows for testing purpose. I am facing few issues:
1) after logging to database. I executed 'Shutdown' command. i took much time. but after that I executed startup. now the databse is not starting uo back.
it says : ORA-01031: insufficient privileges
2) how can we check the status of database whether it is up and running or down
I know in linux, we can check it by ps -ux |grep tns
is there any similar command in windows
3) moreover, I created the general database by using dbca utility. but it did not craeted the default tables . i.e emp, dept etc.
I guess these are the basic tables that gets created.
Thanks
Charandeep S.

I did all the steps as mentioned by you
+1.Please check pfile is present.ORACLE_HOME\database\initorcl.ora+
I could not find the file initorcl.ora, however there is a file named SPFILEORCL.ORA.
+2.Please check the services.msc as vinayak said.if the service Oracleserviceorcl is not there ,create the service like c:\...>oradim -new -sid orcl -syspwd sys+
I have tried a lot and finally found the services and working now.
+3.the service should be present and started.if not... start it by right click -->Start.+
I started all the services.
+4.set the oracle_sid.c:\...>set oracle_sid=*orcl*+
Done
+5.check if it is set.c:\...>echo '%oracle_sid%'+
Working :)
+6.connect to oracle c:\...>sqlplus sys as sysdba+
Connected
+7.startup the database instance.c:\...>startup+
it get started
+8.see the status of the instance.c:\...sql>select status from v$instance;+
OPEN
+9.see the status of the database.c:\...sql>select open_mode from v$database;+
READ WRITE
So all the steps are working I guess and the my issue is resolved. Thank you so much for your help

How can i open oracle forms in windows 7

Dear Members
i was install windows 7 professional edition and install oracle database and forms 10 last edition from oracle.com
now , when i open the forms application and open any form message appear inform me that stopped working and windows can check online for solution
i am trying to open any form by many ways but all my tries failed
can any one help me .
Regards

The picture you provided is so small it cannot be seen. So, it does not help.
There are numerous reasons why a module would not be able to open, but because you are on an unsupported platform it may be difficult to determine as this may be the cause. Other reasons might include the following:
1. You can only open source files. You cannot open compiled modules. In other words, only FMB, MMB, PLL, and OLB files will open in the Builder. FMX, MMX, and PLX will not.
2. Files are of an new version. Meaning, you cannot open a version 11.1.1 FMB in a version 10.1.2 Builder
3. Attempting to access files stored on network shares (mapped drives) may sometimes fail due to delay access times (timeout). This is most common in Windows networks.
4. If the module has dependencies on other modules, but those modules cannot be found or accessed, a failure to open may occur.
There are a variety of other causes, but these are the most common. However, the fact that you are using an old Forms version on a new Operating System, which we know to have problems is not a good idea.

Copying Oracle database on Windows.

Hi Group,
I would appreciate your suggestions on the best procedure and alternatives to
copy an Oracle database 10g r2 (windows 2003 server) from local server to remote server.
Thanks in advance.

Here are two Oracle support documents on just this subject:
Migration of Oracle Database Instances Across OS Platforms 733205.1
How to Create a Duplicate Database on Windows NT using RMAN #186127.1
HTH -- Mark D Powell --

Host Credentials Validation Error - Oracle database on Windows Server 2008

I am trying to log into an oracle database residing on a windows 2008 server through enterprise manager. I keep getting the error Validation error - �. I have added my username to the "log on as bacth job" properties. but I still keep getting this error.

Try also adding:
Logon as a Service and Act as Part of the Operating System.
I assume you are using a domain account and not one that is local to the box being monitored, correct?
Also, in OEM, go to Preferences...Preferred Credentials and enter the user name and password that you are using for the Normal Username and Normal Password and then click test. If this works, you should be good to go.
-Joe

Connect to Oracle Database from Windows Mobile

Is there any Oracle Client product that will allow Windows mobile powered devices to connect to an oracle database? I'm using .net and the compact framework 2.0.
Anyone have a clue?
Regards,
Andras Eliassen

I think I would call it a client tool. Maybe I wasn't so precise in my previous post, sorry. What I need is basically this:
I have a 9i database that is running on a unix box on my network. I have created a Visual Basic .Net application that is using ODT to select, insert, update and delete records in this database - and also executes some stored procedures.
Now I'm trying to move to the next step, and I want my windows mobile powered device/phone to do the same thing - Select, insert, update, delete and execute stored proc/pckgs on the database.
The only way I have found to do this, is by implementing some webservice or something in between my windows mobile device, and the database, because I cannot find dataaccess drivers/components (ODT or the like) that will work on a windows mobile powered device.
Any suggestions?
Regards,
Andras Eliassen

Oracle Database on Windows Upgrade

Hi
Could you please help me on this....
We are having nearly ten Oracle 10.2.0.4.0 databases on Windows 2003 Standard Edition 32 bit server...We got a request from client that OS to be upgraded to Windows 2003 enterprise Edition 32 bit ......
Windows 2003 standard to Enterprise upgrade....so, is there any thing to be done from DB side?????? we can go ahead by keeping db related services down or any thing to be followed? Please help me on this....
Thank you....

user7239280 wrote:
Hi
Could you please help me on this......
Thank you...Patience, Grasshopper.
You posted this plea a mere 37 minutes after your original. This is a global forum of volunteers. No one is paid to monitor and respond, and the person with the information you seek may very will live 20 time zones away from you and went to bed just as you were posting. Your posting went up in the middle of the night for half the world. No one is deliberately withholding information until such time as you sound sufficiently desperate. Give it at least 24 hours, and if you have no response by then, assume that no one knows the answer.

Oracle database and Windows Active directory authentication

Hello,
Our developers have created a couple of web apps which look at our oracle database. Presently they use the APPS user and the user/password is hard coded into the config files.
Is it possible to authenticate these using Windows Active Directory instead? Is it possible to use AD authentication for all developer access to the database?
I'm trying to research this on the web but getting very confused. Would a lot of work be involved to get this up and running?
Is anyone able to offer and advise?
Thank you very much
Sarah

I don't have experience in joining a Linux system with Windows AD, and it generally does not sound like the best idea to me, but since Oracle Enterprise Linux is a clone of Red Hat Enterprise Linux, the solution you are looking for could be called Winbind.
Perhaps the following links are useful:
http://spiralbound.net/blog/2007/04/11/rhel-winbind-authentication-against-active-directory
http://www.linuxmail.info/active-directory-integration-samba-centos-5/
http://magazine.redhat.com/2007/11/12/tips-and-tricks-how-can-i-configure-winbind-to-synchronize-user-and-group-ids-across-multiple-red-hat-enterprise-linux-hosts-on-active-directory-accounts/

Opening Oracle Database in window

Similar Messages

Maybe you are looking for