Opening port on ultraline series 3 model 9100 em??

I have the ultraline series 3 model 9100 em. I was trying to configure it to open port 5900 (so I can use Mocha VNC on my phone). Can anyone advise how? I attempted to look at portforward.com but can't locate this particular router. I spent an hour yesterday being transferred from india, to tx, back to india...and nobody could get me to tech support...which usually is hit or miss anyways depending on who you get.
Can anyone here help me out, or point me to another site? I've done this on other routers (linksys) but it has been so long, and the layout of this particular router has me perplexed.
Thanks!

After you log-in to this router, show the first screen that you see.
While you do not see a guide for the ultraline series 3 model 9100 em there, the screens of your router may be close to the screens of another router guide that they provide.
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

Ultraline series 3 9100 em router default username and password?

I need to change some of the settings and well I cant log in to the Wireless Broadband Router Management Console. Any Ideas?
Ive used the admin/password1 combo. It does not work
Solved!
Go to Solution.

Try the serial number on the router as the password. Everything that was set to password1 was changed for security reasons. Like everyone in the world knew the password, and that is not very secure.

Open port issues with Direct Print functionality

Hi, I have been fighting with HP call support about the Photosmart 7525 printer.
Originally I setup and had performed all the functions to enable both web support and WIFI.
Within an hour the printer would not respond to wireless communication, though it had its wireless indecator showing it was connected.
I was told by HP support that the issue will be resolved in March, as there will be a firmware update to fix the issue.
Now that I had the printer install the new firmware I still get the issue.
Though I found through some sniffing, that there are a number of ports enabled and open that are over and beyond print requirements.
Funny thing I can send my printer into instant lockup with all lights flashing with a simple UDP ping sniff. I would think I can do this with other new HP printers using Eprint functions. I will find HP web based printers that are open for public printing and test my theory that HP Eprinters are open to hacking and denyal of service attempts. My Hp print app on andriod list three in my area, and one is at my local Walmart. This would be cool to find this, as I am usually not the first to point such matters out.
I assume some are for Apple devices to print.
Here is my sniffing report:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:57 Central Daylight TimeNSE: Loaded 110 scripts for scanning.NSE: Script Pre-scanning.Initiating ARP Ping Scan at 07:57Scanning 192.168.223.1 [1 port]Completed ARP Ping Scan at 07:57, 0.23s elapsed (1 total hosts)Initiating Parallel DNS resolution of 1 host. at 07:57Completed Parallel DNS resolution of 1 host. at 07:58, 16.50s elapsedInitiating SYN Stealth Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 445/tcp on 192.168.223.1Discovered open port 139/tcp on 192.168.223.1Discovered open port 80/tcp on 192.168.223.1Discovered open port 443/tcp on 192.168.223.1Discovered open port 8080/tcp on 192.168.223.1Discovered open port 9220/tcp on 192.168.223.1Discovered open port 6839/tcp on 192.168.223.1Discovered open port 631/tcp on 192.168.223.1Discovered open port 7435/tcp on 192.168.223.1Discovered open port 8089/tcp on 192.168.223.1Discovered open port 9100/tcp on 192.168.223.1Completed SYN Stealth Scan at 07:58, 1.71s elapsed (1000 total ports)Initiating UDP Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 5353/udp on 192.168.223.1Completed UDP Scan at 07:58, 1.82s elapsed (1000 total ports)Initiating Service scan at 07:58Scanning 20 services on 192.168.223.1Discovered open port 161/udp on 192.168.223.1Discovered open|filtered port 161/udp on 192.168.223.1 is actually open
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:51 Central Daylight TimeNmap scan report for 192.168.223.1Host is up (0.0025s latency).Not shown: 93 closed portsPORT     STATE SERVICE     VERSION80/tcp   open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)139/tcp open tcpwrapped443/tcp open ssl/http    HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)445/tcp open netbios-ssn631/tcp open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)8080/tcp open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)9100/tcp open jetdirect?MAC Address: A03:C1:BD:C8:34 (Unknown)Device type: printer|general purposeRunning: HP embedded, Wind River VxWorksOS CPE: cpe:/h:hp:laserjet_cm1415fnw cpe:/h:hp:laserjet_cp1525nw cpe:/h:hp:laserjet_1536dnf cpe:/o:windriver:vxworksOS details: HP LaserJet CM1415fnw, CP1525nw, or 1536dnf printer, VxWorksNetwork Distance: 1 hopService Info: Device: printer; CPE: cpe:/h:hphotosmart_7520OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .Nmap done: 1 IP address (1 host up) scanned in 34.11 seconds

OK now I am able to run a full scan on TCP ports without causing a lock up of the printer.
I found that having the printer connect to a router that has been setup to use channel 5, 6 or 7 will cause port scanning issues with the printer.
It is obvious that there are 18 ports that are seen as open, whether they are used or not. Two of which are active but have no service connected to them. Some are just dead like port 25, but over half are active enough to recieve data and lock network connectivity within the printer.
As the firmware states some other laser jets may be affected depending on how the configuration can be set.
I moved my routers channel to channel 1 as it is the only other option I have in a highly congested location. It is not as good as channel 6, but the printer seems to have channel 6 locked in for direct printing.
Here is the latest full scan with UDP enabled, it is the furthest and most complete scan I am able to complete, with UDP ports enabled. The TCP port scan has a bit more and I have placed a simple list below the information given here:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 13:27 Central Daylight Time
NSE: Loaded 110 scripts for scanning.
NSE: Script Pre-scanning.
Initiating ARP Ping Scan at 13:27
Scanning 192.168.1.211 [1 port]
Completed ARP Ping Scan at 13:27, 0.44s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 13:27
Completed Parallel DNS resolution of 1 host. at 13:27, 0.03s elapsed
Initiating SYN Stealth Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 443/tcp on 192.168.1.211
Discovered open port 80/tcp on 192.168.1.211
Discovered open port 139/tcp on 192.168.1.211
Discovered open port 8080/tcp on 192.168.1.211
Discovered open port 445/tcp on 192.168.1.211
Discovered open port 631/tcp on 192.168.1.211
Discovered open port 9100/tcp on 192.168.1.211
Discovered open port 7435/tcp on 192.168.1.211
Discovered open port 9220/tcp on 192.168.1.211
Discovered open port 6839/tcp on 192.168.1.211
Completed SYN Stealth Scan at 13:27, 5.25s elapsed (1000 total ports)
Initiating UDP Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 137/udp on 192.168.1.211
Completed UDP Scan at 13:27, 4.46s elapsed (1000 total ports)
Initiating Service scan at 13:27
Scanning 16 services on 192.168.1.211
Discovered open port 161/udp on 192.168.1.211
Discovered open|filtered port 161/udp on 192.168.1.211 is actually open
Completed Service scan at 13:29, 82.51s elapsed (17 services on 1 host)
Initiating OS detection (try #1) against 192.168.1.211
NSE: Script scanning 192.168.1.211.
Initiating NSE at 13:29
Completed NSE at 13:30, 82.29s elapsed
Nmap scan report for 192.168.1.211
Host is up (0.023s latency).
Not shown: 1983 closed ports
PORT     STATE         SERVICE      VERSION
80/tcp   open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
139/tcp open          tcpwrapped
443/tcp open          ssl/http     HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
| ssl-cert: Subject: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Issuer: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Public Key type: rsa
| Public Key bits: 1024
| Not valid before: 2014-02-25T10:12:24+00:00
| Not valid after: 2034-02-20T10:12:24+00:00
| MD5:   9144 ca3b 557e 09cc aba0 8387 2732 2375
|_SHA-1: a6b2 95c0 b72a 7201 578c 32de 662a e6fe b082 48ca
|_ssl-date: 2014-03-21T13:30:09+00:00; -4h59m12s from local time.
445/tcp open          netbios-ssn
631/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
6839/tcp open          tcpwrapped
7435/tcp open          tcpwrapped
8080/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
9100/tcp open          jetdirect?
9220/tcp open          hp-gsg       HP Generic Scan Gateway 1.0
137/udp open          netbios-ns   Samba nmbd (workgroup: HPPS7525)
138/udp open|filtered netbios-dgm
161/udp open          snmp         SNMPv1 server (public)
| snmp-hh3c-logins:
|_ baseoid: 1.3.6.1.4.1.25506.2.12.1.1.1
| snmp-interfaces:
|   Wifi0
|     IP address: 192.168.1.211 Netmask: 255.255.255.0
|     MAC address: a0:d3:c1:bd:c8:32 (Unknown)
|     Type: ethernetCsmacd Speed: 10 Mbps
|     Status: up
|_    Traffic stats: 6.16 Mb sent, 3.43 Mb received
| snmp-netstat:
|   TCP 0.0.0.0:7435         0.0.0.0:0
|   TCP 192.168.1.211:56076 15.201.145.52:5222
|   UDP 0.0.0.0:3702         *:*
|   UDP 127.0.0.1:666        *:*
|_ UDP 192.168.223.1:67     *:*
| snmp-sysdescr: HP ETHERNET MULTI-ENVIRONMENT
|_ System uptime: 0 days, 3:34:23.28 (1286328 timeticks)
| snmp-win32-shares:
|_ baseoid: 1.3.6.1.4.1.77.1.2.27
1022/udp open|filtered exp2
1023/udp open|filtered unknown
3702/udp open|filtered ws-discovery
5355/udp open|filtered llmnr
MAC Address: A03:C1:BD:C8:32 (Unknown)
Device type: general purpose
Running: Wind River VxWorks
OS CPE: cpe:/o:windriver:vxworks
OS details: VxWorks
Uptime guess: 0.150 days (since Fri Mar 21 09:55:04 2014)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=255 (Good luck!)
IP ID Sequence Generation: Busy server or unknown class
Service Info: Hosts: HPA0D3C1BDC832, HPPS7525; Device: printer; CPE: cpe:/h:hphotosmart_7520
Host script results:
| nbstat:
|   NetBIOS name: HPA0D3C1BDC832, NetBIOS user: <unknown>, NetBIOS MAC: <unknown>
|   Names
|     HPA0D3C1BDC832<00>   Flags: <unique><active><permanent>
|     MSHOME<00>           Flags: <group><active><permanent>
|     HPA0D3C1BDC832<20>   Flags: <unique><active><permanent>
|     HPPS7525<00>         Flags: <unique><active><permanent>
|_    HPPS7525<20>         Flags: <unique><active><permanent>
| smb-security-mode:
|   Account that was used for smb scripts: guest
|   User-level authentication
|   SMB Security: Challenge/response passwords supported
|_ Message signing disabled (dangerous, but default)
TRACEROUTE
HOP RTT      ADDRESS
1   23.26 ms 192.168.1.211
NSE: Script Post-scanning.
Read data files from: F:\Progs\Nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 180.90 seconds
           Raw packets sent: 2030 (74.829KB) | Rcvd: 2921 (149.377KB)
+++++++++++++++++++++++++++++++++++++++++++++++++++++===
Full TCP port scan without UDP scanning of all ports, showing up as open... * designates open and active.
192.168.223.1Discovered open port 25/tcp on
*192.168.223.1Discovered open port 80/tcp on
*192.168.223.1Discovered open port 110/tcp on
*192.168.223.1Discovered open port 119/tcp on
*192.168.223.1Discovered open port 139/tcp on
192.168.223.1Discovered open port 143/tcp on
*192.168.223.1Discovered open port 443/tcp on
*192.168.223.1Discovered open port 445/tcp on
192.168.223.1Discovered open port 465/tcp on
192.168.223.1Discovered open port 563/tcp on
192.168.223.1Discovered open port 587/tcp on
*192.168.223.1Discovered open port 631/tcp on
192.168.223.1Discovered open port 993/tcp on
192.168.223.1Discovered open port 995/tcp on
*192.168.223.1Discovered open port 7435/tcp on
*192.168.223.1Discovered open port 6839/tcp on
*192.168.223.1Discovered open port 8080/tcp on
192.168.223.1Discovered open port 8089/tcp on
*192.168.223.1Discovered open port 9100/tcp on
*192.168.223.1Discovered open port 9220/tcp on

Open ports forward ports?

Hey i ve had trouble connecting to a game ( World of Warcraft) with my wireless-B broadband router model: BEFW11S4 . I took my computer to a lan center and played it there fine, but once i took it home it crashed during gameplay. i read the error and it says it was due to a firewall, im pretty sure its from the router. WoW websites suggests opening ports or forwarding im not great with computers but i was just hoping u guys can help me with this one.

Open IE and go to http://192.168.1.1. YOu will find a login screen.Keep the username blank and the password is "admin".
Go to "Applications and Gaming".Click on the sub-tab " Port Triggering". Provided the ports no that you need to open the ports.
Also upgrade the firmware. If you don't get the above mention screen. Firmware Upgrade may get you this screen.

Opening Ports on Airport Express for GTA IV

I am told that to play Grand Theft Auto 4 (GTA 4) properly, I need to "open ports" on my router and enable UPnP (Universal Plug-n-Play).
The ports I am supposed to open are:
UDP
3478
3479
6672
28900
TCP
80
443
5223
3478
3479
3480
8001
8080
27900
On my Windows 2000 machine, using the AirPort Admin Utility, when I configure the AirPort, I get a window that has a "port mapping" tab.
Is this how I open the ports listed above? If so, it asks for a private IP address, Public Port, and Private port. How do all these relate to the port numbers above?
In the configure base station window, i can't find any mention of how to enable UPnP
Thanks!!!!!
PS, don't hate on me for having a PC, i'm just waiting until Apple comes out with a BluRay capable laptop...
Message was edited by: Psychos40

Hello Psychos40. Welcome to the Apple Discussions!
On my Windows 2000 machine, using the AirPort Admin Utility, when I configure the AirPort, I get a window that has a "port mapping" tab.
Is this how I open the ports listed above? If so, it asks for a private IP address, Public Port, and Private port. How do all these relate to the port numbers above?
Yes.
To setup Port Mapping:
Assign a manual IP to the host device
The "host" device is the computer that will be hosting GTA and needs to be accessed from the Internet. Under Windows 2000, you would use Network Settings to assign a static IP address to this computer. Note: Be sure to assign an IP address outside of the DHCP range provided by the AirPort Express Base Station (AX) default range of 10.0.1.2 - 10.0.1.200, like 10.0.1.201
To setup port mapping on an AirPort Express Base Station (AX), connect to the AX's wireless network, and then use the AirPort Admin Utility to change these settings:
Port Mapping tab
o Click "Add"
o Public Port: <enter the Port # which will be accessed from the Internet>
o Private Address: <enter the static IP address from above>
o Private Port: <either enter the same value as the Public port or the value you want your application/service to answer on>
o Click "Ok"
o Repeat the last series of steps for each port you wish to map.
In the configure base station window, i can't find any mention of how to enable UPnP
Unfortunately, that's because the AirPorts do not support UPnP. Instead, the AirPorts have a similar feature known as "NAT Port Mapping Protocol." You enable/disable this function on the Ethernet Port Security tab under Base Station Option within the AirPort Admin Utility. Note: Although NPmP is similar, it is not the same as UPnP and may not offer the same features. If GTA requires UPnP, the AirPort's NPmP feature may not support it.

Can't Open ports in Express

Hi,
Here's my setup:
Cable router connected by ethernet to Airport Extreme (not the new model)
Airport extreme broadcasts to an Airport Express which relays the signal to my computer.
I need to open up my ports for Transmission to use so I can get my upload ratio up. I always remain in stealth mode whenever I connect.
I've gone into my system prefs and allowed transmission to use ports in 10.5 (different setup in leopard now)
I've also opened up the ports needed for the Extreme, but when I get to the Express there doesn't seem to be any options for opening ports, so I remain in stealth mode with terrible upload speeds.
All help is greatly appreciated.

The reason you don't see any options for opening ports on your Airport Express is because it isn't relevant to its current mode of operation. Your Airport Express has been configured as a remote base station - as you said, it relays signals from your base station to your computer. In that mode, the Airport Express's built in router is completely disabled - and since it is completely disabled, there is no need to be forwarding ports.
You mentioned you have a "cable router". If this "cable router" indeed has a built in router, then your efforts need to be directed to either turning off its router (to work in so-called "bridge mode") or setting up port forwarding on that device.

How do I forward/open ports?

Need to open some ports to FaceTime behind a wireless firewall on my iPhone... no idea where/how to open ports. Could someone point me in the right direction? Thank you!!

You do it on the router.
What brand and model is your router?

How to open Port 85 & 37777 for NVR

I recently purchased a security camera system (Q-SEE / QC Series) for my house but the system required to have open ports 85 and 37777 to be able to view the cameras from outside the local network ie: from my computer at work.
Can someone please help me? I'm not a computer savy and I'm having a hard time to be able to accomplish this task.
Thank you in advance

Matt's pointed you in the right direction - ignore the stuff about uPNP, you just need to use AirPort Admin to configure your time capsule - setup port forwarding to forward ports 85 and 37777 to the IP address of your camera.
Use AirPort Utility to access your Time Capsule. Under the Network tab you have the configuration for the network, including port forwarding options:
Click the + button to add a port forwaring rule and add the first public port (e.g. 85) and the IP address of the camera on the LAN that it should be forwarded to:
Here I've created a rule for port 85 - I'm assuming it's using TCP, but if it's using UDP just add the port values into the UDP fields instead (or in addition to). Also set the IP address to your camera's address (which probably isn't 10.0.1.201 as above).
Rinse and repeat for port 37777

HP Pavillion 500 PC series (model no : 500-119ea) - no sound

My PC is running on Windows 8 and I have bought it recently. My PC is a HP Pavillion 500 PC series (model no : 500-119ea). I have no sound whatsoever coming from my computer. The speaker icon at the bottom of my desktop is not on mute. I seem to have an IDT high definition audio CODEC on my hardware and sound settings. In the device manager, this is enabled. However when I test this, no sound is coming. Do I need a HDMI cable connecting my CPU and monitor. Both are HP.
Please let me know how I can get this fixed?

Your HP Pavilion 500-119ea Desktop Computer doesn't have internal speaker and therefore must be connected to external speakers to produce sound. This model supports;
2 - Optical S/PDIF-out 12 - Audio: Line Out port (lime)
Additionally, ports 8, 9, an 10 can be used for multi-channel audio setups. Also provide the model number of your monitor, so we can determine if it has speakers and what connections are needed, if any.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

RV215W inbound rules with control ip - cannot open port 25

I have the exact same router, exact same firmware and the this exact same problem. I cannot open port 25 and specify a range of IP addresses. This is simply not working. What do we have to do to get this to work correctly? When I port forward the SMTP service it allows all IP's and works fine. When i try to use an Access Rule, it does not work. Can someone from CISCO help please? Thanks,

It's not just single port forwarding that has bugs, the entire router has bugs and simply does not work as advertised. I have found the following bugs/aspects of this router that just does not work correctly: 1. If you have to open ports, and who doesn’t, this router will eventually stop accepting packets from WAN>LAN. You will still have Internet access but no open ports. A reboot will fix this problem. Oh, by the way, this router has no scheduled reboot option! ••ßThat would be a workaround but a welcome one for this router. 2. Firewall Access rules do not work!! Yep, a Cisco router and basic functionality simply does not work. I called Cisco and even though the tech saw the router not working denied it was a bug! Said we have to do port mirroring, setup a workstation with WireShark and capture packets so we can debug the issues! I told him I would have appreciated if Cisco would have debugged the issues with their router BEFOR they shipped the units. Stay away from Cisco Small Business Routers. I wish I had. And if there are any Cisco die-hards out there willing to prove me wrong, just reply to this and please, prove me wrong that the RV series and specifically the RV215W is not JUNK.

I have a game on my xbox one that is telling me I need to open ports in order to play it I am not all that tech savvy and have no idea how to do this

I have an airport extreme and I am trying to play a new game on my xbox one and it keeps kicking me I have comcast internet that is more than fast enough so I went to the games site and it says I need to either create a static ip or to open ports no idea how to do either of these or what that does any help would be appreciated.

There are heaps of posts here about how to open ports on apple routers specifically for xboxes.
AirPort Extreme and xbox 360

Open ports in zones

I am encountering a strange behavior in new zones created using zonemgr 2.0.6 (this is the only way I create zones, so I do not know if the issue is more general). When I create a new zone, two strange things are happening:
1. Immediately after the zone is created, no services are running, not even ssh
2. About 10 minutes later, a whole bunch of services are running. Most of these are not running on the global zone.
For reference, nmap output on the global zone is the following:
[dcomsm1@dcomsm1:~] $ nmap t2000
Starting Nmap 5.00 ( http://nmap.org ) at 2010-02-28 20:51 EST
Interesting ports on 131.247.16.134:
Not shown: 991 closed ports
PORT STATE SERVICE
22/tcp open ssh
111/tcp open rpcbind
2161/tcp open apc-agent
3052/tcp open powerchute
4045/tcp open lockd
32774/tcp open sometimes-rpc11
32775/tcp open sometimes-rpc13
32776/tcp open sometimes-rpc15
32777/tcp open sometimes-rpc17
The new zone is created using the following zonemgr arguments:
[root@t2000:~/zonecfgs] # more ./temp.sh
#!/usr/bin/bash
./zonemgr -a add -n drenkhah -z "/export/zones" -P "root_pw" -I "131.247.16.159|e1000g0|25|drenkhah" -R "/root|/usr/bin/bash" -s "basic|lock"
zone creation output is as follows:
[root@t2000:~/zonecfgs] # ./temp.sh
Checking to see if the zone IP address (131.247.16.159) is already in use...IP is available.
cannot create '/drenkhah': leading slash in name
chmod: WARNING: can't access /export/zones/drenkhah
chown: /export/zones/drenkhah: No such file or directory
Zone drenkhah will be placed in the following directory: /export/zones/drenkhah
Preparing to install zone <drenkhah>.
Creating list of files to copy from the global zone.
Copying <2568> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <1042> packages on the zone.
Initialized <1042> packages on zone.
Zone <drenkhah> is initialized.
The file </export/zones/drenkhah/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
Creating the sysidcfg file for automated zone configuration.
Booting zone for the first time.
Waiting for first boot tasks to complete.
Waiting for automatic post-install reboot to complete
Updating netmask information.
Updating /etc/inet/hosts of the global zone with the drenkhah IP information.
Generating ssh host keys. Details in the (/root/.zonemgr/zone28330-ssh.log) file.
svcadm: Pattern 'svc:/network/ssh' doesn't match any instances
Setting the root user's home directory to /root
Setting the root user's shell to /usr/bin/bash
Disabling un-necessary services via basic method for the default services.
Zone drenkhah is complete and ready to use.
nmap output just after creating the zone is as follows:
[dcomsm1@dcomsm1:~] $ nmap drenkhah
Starting Nmap 5.00 ( http://nmap.org ) at 2010-02-28 17:53 EST
All 1000 scanned ports on 131.247.16.159 are closed
Nmap done: 1 IP address (1 host up) scanned in 29.39 seconds
nmap output 17 minutes later is as follows:
[dcomsm1@dcomsm1:~] $ nmap drenkhah
Starting Nmap 5.00 ( http://nmap.org ) at 2010-02-28 18:10 EST
Interesting ports on 131.247.16.159:
Not shown: 986 closed ports
PORT STATE SERVICE
21/tcp open ftp
22/tcp open ssh
23/tcp open telnet
25/tcp open smtp
79/tcp open finger
111/tcp open rpcbind
513/tcp open login
514/tcp open shell
587/tcp open submission
4045/tcp open lockd
6112/tcp open dtspc
6788/tcp open unknown
6789/tcp open ibm-db2-admin
7100/tcp open font-service
Nmap done: 1 IP address (1 host up) scanned in 29.25 seconds
Note that there are many open ports
# uname -a
SunOS t2000 5.10 Generic_137137-09 sun4v sparc SUNW,Sun-Fire-T200
Thanks
Manish

The Leopard OS X firewall is application based and not port based. Honestly, I haven't played with it enough to know for certain how to answer your question.
But... when you do connection sharing, you're essentially doing a port based NAT for the systems on the other side of your Mac. This pretty much keeps you from initiating anything to the other system even without a local firewall unless you were to configure port forwarding.
As for blocking packets, you would need to use the 'ipfw' command to do things at the port level.

Open port 5000 through 5005

Hello Rogue Amoeba support tells me, in order to get the Airfoil Speakers software to function, I must open port 5000 through 5005 on my router (WRT54G). I have scoured the .pdf manual, perused the web support site as well as the present forums. Mostly, I don’t know what much of this stuff means so I may have inadvertently passed up what I need to know. Mainly, I don’t want to screw up the router function as it is working just dandy. For all I know, ports 5000 through 5005 are already open. If anyone can give me some guidance in plain English, I would certainly appreciate it. Thanks.

Log in to the router set-up page. To do this, open up a web browser ( Internet Explorer , Firefox etc) and type on the address bar your default gateway (if left alone, it is usually 192.168.1.1). Just leave it's username blank, password as a default is admin.
Go to the Applications and Gaming tab then go to the Port Triggering subtab. Start port is 5000 and end is 5005 for both Triggered and Forwarded range.

Help open port on ASA5510 (version 8.3)

Hi all,
I configured ASA to open port 21, 3389, 5900 (outside access in) but when i check port just success : 21 and 3389, Error: 5900
If i configured with only one port 5900 or 3389, is't ok, i don't undesrtand what 's the problem?
ASA5510>
ASA5510> ena
Password: ***********************
ASA5510# show run
: Saved
ASA Version 8.3(1)
hostname ASA5510
domain-name lohoi.local
enable password *********************** encrypted
passwd *********************** encrypted
names
interface Ethernet0/0
description Connect_to_Modem
nameif outside
security-level 0
ip address 10.0.0.2 255.255.255.0
interface Ethernet0/1
description Connect_to_Router2911
nameif inside
security-level 100
ip address 172.16.17.2 255.255.255.240
interface Ethernet0/2
shutdown
no na
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
description Management
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
ftp mode passive
clock timezone ICT 7
dns server-group DefaultDNS
domain-name lohoi.local
object network obj-any
subnet 0.0.0.0 0.0.0.0
object network ftpserver
host 192.168.88.90
description FTP server
object network Remote_Desktop
host 192.168.100.29
object network VNC
host 192.168.100.4
access-list 101 extended permit icmp any any
access-list 101 extended permit icmp any any echo-reply
access-list 101 extended permit tcp any any
access-list outside_access_in extended permit tcp any object ftpserver eq ftp
access-list outside_in extended permit tcp any host 192.168.100.29
access-list outside_in extended permit tcp any host 192.168.100.4
pager lines 24
mtu outside 1500
mtu inside 1500
mtu management 1500
icmp unreachable rate-limit 1 burst
asdm image disk0:/asdm-631.bin
asdm history enable
arp timeout 14400
object network obj-any
nat (inside,outside) dynamic interface
object network ftpserver
nat (inside,outside) static interface service tcp ftp ftp
object network Remote_Desktop
nat (inside,outside) static interface service tcp 3389 3389
object network VNC
nat (inside,outside) static interface service tcp 5900 5900
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.0.0.1 1
route inside 192.168.88.64 255.255.255.224 1
route inside 192.168.100.0 255.255.255.0 172.16.17.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http authentication-certificate inside
http authentication-certificate management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.100.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username admin password *********************** encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD
CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:667cb3ec729681c78ccab9a57abd89df
: end
ASA5510#

ASA5510# show run
: Saved
ASA Version 8.3(1)
hostname ASA5510
domain-name lohoi.local
enable password ****************** encrypted
passwd ****************** encrypted
names
interface Ethernet0/0
description Connect_to_Modem
nameif outside
security-level 0
ip address 10.0.0.2 255.255.255.0
interface Ethernet0/1
description Connect_to_Router2911
nameif inside
security-level 100
ip address 172.16.17.2 255.255.255.240
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
description Management
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
ftp mode passive
clock timezone ICT 7
dns server-group DefaultDNS
domain-name lohoi.local
object network obj-any
subnet 0.0.0.0 0.0.0.0
object network ftpserver
host 192.168.88.90
description FTP server
object network remote_desktop
host 192.168.100.2
object network remote_vnc
host 192.168.100.4
access-list 101 extended permit icmp any any
access-list 101 extended permit icmp any any echo-reply
access-list 101 extended permit tcp any any
access-list outside_access_in extended permit tcp any object ftpserver eq ftp
access-list outside_access_in extended permit tcp any host 192.168.100.4 eq 5900
access-list outside_access_in extended permit tcp any host 192.168.100.2 eq 3389
pager lines 24
mtu outside 1500
mtu inside 1500
mtu management 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asd
asdm history enable
arp timeout 14400
object network obj-any
nat (inside,outside) dynamic interface
object network ftpserver
nat (inside,outside) static interface service tcp ftp ftp
object network remote_desktop
nat (inside,outside) static interface service tcp 3389 3389
object network remote_vnc
nat (inside,outside) static interface service tcp 5900 5900
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.0.0.1 1
route inside 192.168.88.64 255.255.255.224 172.16.17.1 1
route inside 192.168.100.0 255.255.255.0 172.16.17.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http authentication-certificate inside
http authentication-certificate management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.100.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username admin password ****************** encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD
CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:4f061a213185354518601f754e41494c
: end
ASA5510#
So i configured again, but i'm not to access to 5900 port

Open ports for all in LAN

Hi, a few days ago I bought a wireless router WRT160n. I want to ask how to open some port for all in LAN(3 clients). For example all in LAN have PeerToPeer application for torrents. I want to open port for example 20202 for all. Now I open port from menu Applications & Gaming->Single Port Forwarding, but I must set port for each user IP address.
Can somebody tell me how to open port for all in LAN without to config for each computer?
Thanks in advance.

Hi gv. I read more about UPnP and the WRT160n User Guide. In section Administration>managment int wrote that UPnP is Enabled by default in my router it is corect. I Setup mu PeerToPeer(eMule) TCP/UDP ports to 20202 and check option "Use UPnP to setup ports". I test and close this port on my router configuration for my computer on "Single Port Forwarding", but in eMule the port is still block. Can you explain why it did not work. For UPnP it says that if Enable it allow users with Windows ME and XP automatically to gonfigure Router ports
Thanks in advance!
Best Regards.

Opening port on ultraline series 3 model 9100 em??

Similar Messages

Maybe you are looking for