Opening Ports, how to get more than 10 slots

Hello. My Router is a WRT54GS running the latest firmware. I am trying to set my 360 up for Media Sharing using Windows Media Centre. To do this, I have to open up 5 ports in total. I already have 3 slots taken up by the PS3, two for IRC and 1 for utorrent. This leaves me with 4 slots left for ports. I know I can use a range to join some together, but as the PC, PS3 and 360 use different IP's, it means each need there own ports opening. Is there a way, if I need to in the future, to give me more slots to open more ports? Also, when trying to open a range of ports for the 360, some are the same as the PS3, and I get the error message "port overlap occurred! Please change your entry!" Does this mean, if a port is open for one IP, in this case its the PS3, and is 192.168.1.123, it'll also be open for another ip, the 360, which is .1.102 Hope I've made sense. Cheers Mike

One port can be forwarded to only one local IP address. And you can combine nearby port entries into a range which are for same local IP address.

Similar Messages

How to get more than 256 bytes data

hello.
I use Schlumberger 32K Card�iJava Card 2.1�j.
Please tell me how to get more than 256 bytes data from the applet in the card!!
According to JCRE specification, need to use Get Response Command.
What is Get Response command?
Do I have to write processing of Get Response command to an applet?
Or JCRE processes Get Response command?
If knows, please tell me about!!
Thanks.

Thanks for your response!!
I understand that I have to write processing of Get Response command to an applet.
But case of Schlumberger 32K card, when host send Get Response command to an applet, card reply 6F-00!?
I'm investigating now, and it seems that response is returned before applet processes Get Response command(CLA = 00, INS = C0).
Do JCRE perform the process of Get Response command?

How To Get more than one Return Values in LOV ADF

In ADF LOV, I can get only one return value;
How can I Get more than one values like in Oracle Form?
SomeOne can help me?
Thanks

you may add more <set> tag like the following:
<event name="lovSelect">
<set property="inputValue" value="${bindings.Id.inputValue}" target="${data.work_workBusinessViewUIModel.buyCompanyId}"/>
</event>
or you can implement your Action

How to get more than 300 results for a search

Hi all,
When we search for something in a peoplesoft, we get 300 default results right.
Is there a way we can change that to 500 or 600 or any.
Please help me.
Thank you,
Bye.

I heard that we have to do some settings in psappserv.cfg file to get more than 300 rows in a search. Is that true?
Please help me.
Thank you,
Bye.

How to get more than one lack record in 1 or 2 seconds

pls help its urgent ,
i need to retrieve more record from different table it have more than one lack record ,and its more than 20 seconds ,how to minimise the time to one seconds
My sql:
SELECT
tl.ProjectID,
pr.jobname,
name as Department_name,
ChargeNum,
(ac.ActivityCode ||':'||ac.SubCode) as ActivityCodeName,
SUM(HoursWorked), (Case When isBilled=1 or billedRate<>0 then BilledRate else ppr.Rate End) as RATE
FROM
TimeLogEntries tl INNER JOIN activitycodes ac on ac.ACTIVITYCODEID=tl.ACTIVITYCODEID INNER JOIN projectrates ppr on tl.ACTIVITYCODEID = ppr.ACTIVITYCODEID and tl.projectid=ppr.projectid ,
projects pr INNER JOIN departments d on d.DEPARTMENTID =pr.REVENUECENTERID
WHERE
to_char(Date_,'yyyy-mm-dd') BETWEEN '2006-01-01' and '2008-12-30'
AND
tl.ProjectID = pr.ProjectID
Group By
tl.ProjectID,
tl.ActivityCodeID,
BilledRate,
ChargeNum,
pr.jobname,
name,
(ac.ActivityCode ||':'||ac.SubCode),
(Case When isBilled=1 or billedRate<>0 then BilledRate else ppr.Rate End)
ORDER BY
tl.ChargeNum;

hi,
even i am searching for some thing similar.
i want to have 3 calendars in one page.
getting same message calendar already exists on page 2. You can only add one calander per page. Select a different page.
pls help.

How to get more than 2 squares in Genius Mixes?

I have iTunes 9 and when I do Genius Mixes I get only 2 boxes when it says you get 12. How can I do this? Do I need to get more music?

Hi shraddha,
The Jet OLE DB provider reads a registry key to determine how many rows are to be read to guess the type of the source column. The registry setting is:
HKEY_LOCAL_MACHINE\Software\Microsoft\Jet\4.0\Engines\Excel\TypeGuessRows
Or
HKEY_LOCAL_MACHINE\SOFTWARE\wow6432node\microsoft\jet\4.0\engines\Excel\TypeGuessRows
By default, the value for this key is 8. Hence, the provider scans the first 8 rows of the source data to determine the data types for the columns. If any field looks like text and the length of data is more than 255 characters, the column is typed as a
memo field. So, if there is no data with a length greater than 255 characters in the first 8 rows of the source, Jet cannot accurately determine the nature of the data type. Therefore, values longer than 255 characters may be truncated or ignored.
To import data from a memo column, we must make sure that the memo column in at least one of the sampled rows contains a value longer than 255 characters. Or we can increase the number of rows sampled by the driver to include such a row by increasing the
value of TypeGuessRows. For more details, please refer to the following kb:
http://support.microsoft.com/kb/281517/en-us
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

External Hard Drive(ERROR CODE 0) .DMG Back Up Issues. How to get more than 4gbs in .DMG back ups.

I am currently using a my external hard drive for my late 2009 Mac Mini, my brothers MBP and my sisters HP laptop. I have a Western Digital My Passport 1T external Hard Drive to back up all are information. I formatted it to work on mac and pc and its on the "MS-DOS(FAT) setup at the momment. Im trying to back up DMG files from my HDD hard drive in my computer to the External Hard Drive to pass them onto my brother. I understand the whole part of me getting the "Error Code 0" where i can only put 4gbs of storage for that. I wanted to no is there a way for me to format my external hard drive for it to work on a Mac and a PC but for me to also transfer my .dmg files with more than 4gbs of that storage to my external hard drive?
p.s Im running on OSX 10.6.8 and the DMG files are alittle more than 4 gbs. From 5-10gbs. Thank you for all the replys. It helps me out and others in the Apple community out!

Hi, Steve. Your proposed procedure is just fine until you get to this point:
...reformat the WD to be Mac friendly *and reformat in FAT32* ...
Reformatting the newly-reformatted Mac-friendly drive as FAT32 will, as you say, simply put you back where you were before, but with your data on a different drive. Omit that step, and you'll have a Mac-friendly drive that you can copy your data back onto.
If you normally work with files exceeding 4GB in size, you won't want any hard drive in FAT32 format. If for some reason you'd like all your external drives in NTFS format, download and install the NTFS-3G driver, which will enable your Mac to read *and write to* that disk format.

How to get more than 4 coloured rows in a report depending on column values

Hi,
I've looked through the forum and found some stuff on mutli-coloured reports and found the link to http://htmldb.oracle.com/pls/otn/f?p=11933:7:557008579481721819
But I have several problems:
This shows how to get 3 colours, but it's easy to get up to 4 by just using the "Column Templates" in a new report template.
I don't understand where to put the snippets. It says to put them in "Row Templates" , "Before Rows" and "After Rows" but my report template page doesn't have these options! I've got "Column Templates" (4 of them), "Before Each Row" and "After Each Row".
Am I looking at a link for an old version?
What I want to do is set the row colour dependant on a column called "level" which is between 1 and 5.
Thanks

Hi Vikas,
It's almost perfect now. My only problem is that the pagination table is, for some reason, enclosed within the results table (I've used FireFox web developer's tools and checked the souce HTML to be sure of this). So, if I have a border at table level, it appears on the row containing the pagination.
I've had to remove table borders and put right borders on the table data cells, but I can't find a way to put left borders on the table rows, so I have a pretty table with 5 levels of colour, but no borders on the left-hand side.
Ideally I'd like to avoid having the pagination stuff within the results table, but I can't see how/where to put a </table> to sort this out!
Ros

How to get more than 1000 rec from Oracle?

Hi
i got this issue from 1 of my fnd.
can any one tell me how to over come this issue?
I need help in solving the issue
This is the oracle error coming when we try to export
the records to the excel sheet.
Macromedia][Oracle JDBC Driver][Oracle]ORA-01795:
maximum number of expressions in a list is 1000
This error is due to the limitation in oracle db list
query.
example:
select * from FEEDBACK_IN Where feedback_in.case_id
IN ( (param 1) , (param 2) , (param 3) , (param 4) ,
(param 5) , (param 6) , (param 7) , (param 8) , (param
9) , (param 10) , (param 11) , (param 12) , (param
13)……………………….(param
5000))
If the list exceeds 1000, we will get the following
error from the database. And there is a limitation in
oracle db to 1000.
We need to rewrite the query to avoid the list error
if the list exceeds more then 1000 records.

You must work with the guy who asked the same question
yesterday.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=6&threadid=1149324&ente rthread=y

How to get more than 1 iphone connected on itunes to home computer

i need to get my wife's iphone on itunes for our home computer and not sure how to proceed so we can both have access

How to use multiple iDevices with one computer

How to get more than one airplay on sound menu

When I option-click on the sound icon it drops down a list of Output devices and Input Devices - but it only shows the internal resources or the most recently used airplay device. We have several airplay receivers throughout the house - is there any way for all airplay receivers to show up on this list?

you may add more <set> tag like the following:
<event name="lovSelect">
<set property="inputValue" value="${bindings.Id.inputValue}" target="${data.work_workBusinessViewUIModel.buyCompanyId}"/>
</event>
or you can implement your Action

How to get more than 50 rows per View

Hi everyone,
I wanted to ask if anyone knows how to change the limit of shown recors/rows per view which is 50 by default (also see screenshot).
I couldn't find any clue about this.
I hope someone can help me out.
Thx in advance
Screen:
http://www8.pic-upload.de/12.08.11/1e5s8ml2631p.jpg

I wouldn't use so many rows displayed in a Report, because the performance is going to be very poor...

How can I get more than one firewre port ?

Hello,
how can I get more than one firewire port ? I'd like to be able to connect my canon HV30 camera as well as my firewire external HD at the same time so I can use firewire to upload the videos I've taken. Is this possible?
TIA

Hi ginestre-
Many FireWire hard drives have 2 firewire ports so that you can daisy-chain devices and connect the camera that way.
Daisy-chaining is not the most reliable method, but it works, so you could buy a FireWire hub.
Luck-
-DP

How can a get more than 1 page on a greetings card in elements 11

How can a get more than 1 page on a greetings card in elements 11

Some menu entries in the main menu bar are hidden if you use the mouse and only appear if you use the keyboard to open the menu (Bug 626825).
You can see the difference if you use Alt+F to open the File menu or Alt+B to open the Bookmarks menu and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by tapping Alt or by pressing F10.
* "Bookmark All Tabs" (Shift+Ctrl+D) no longer shows in the Bookmarks menu unless you open the Bookmarks menu via the keyboard (Alt + B).
* "Bookmark This Page" can be accessed via the right-click context menu of that browser page.
* "Bookmark All Tabs" can be accessed via the right-click context menu of a tab on the tab bar.
See also:
* [[How do I use bookmarks?]]
* Bookmark All: https://addons.mozilla.org/firefox/addon/bookmark-all/

How do I get more than one signature option in Fill and sign?

How do I get more than one signature option in Fill and sign?

Hi,
Are you trying to place more than one signature on a PDF document?
Please explain the workflow.
Regards,
Anand

Opening Ports, how to get more than 10 slots

Similar Messages

Maybe you are looking for