Opening post-it notes created with Acrobat X

If I send a PDF created with Acrobat to someone without this software, will that person be able to open the post-it notes using Adobe Reader?

Yes

Similar Messages

Problems opening PDFs created with Acrobat in TFS

Hi,
I know this might not really be a supported issue, but any thoughts you might have would be appreciated!
I've been creating PDFs using Primo PDF and a trial of Acrobat X. I then put them on TFS / MS Visual Studio 2000.
So, when I try to open a PDF I've checked in, the ones I've created in Primo are fine and launch whereas the ones created in Acrobat won't open and an error message about Inconsistent Line Endings is displayed.
It says:
"The line endings are not consistent. Do you want to normalize them....
Line ending: Windows (CR LF)"
The PDFs DO work when I open them from the normal place in the windows file system. However, when I try to "normalize" them by clicking yes, it breaks them completely.
Does anyone have any idea why this is happening and what I can do to fix it? I'm assuming it must be something to do with the conversion or document settings, because this only happens to PDFs created with Acrobat.

In Acrobat X, SharePoint Integration has been added which allows users to check-out/check-in the document from within Acrobat. Clicking the file from document library in Internet Explorer opens the file in Acrobat. The configuration that needs to be done on the SharePoint server is explained in the following KB article in section 11.1.
http://kb2.adobe.com/cps/837/cpsid_83709/attachments/Acrobat_Enterprise_Administration.pdf
Please try these and let us know if you face any problems after this.

Word 2000 hyperlinks don't work in .pdf created with Acrobat 9 Pro

I'm new to Adobe Forums, so please overlook the effrontery of my posting a query previously discussed. Perhaps someone can simply reply with a link to the prior discussion. I have installed Acrobat 9.2 Pro in 2 computers, one running XP64 Pro, the other XP32 Pro. Word 2000 is installed in both. All Word hyperlinks work fine, but after .pdf conversion using Acrobat 9.2 Pro, none of these work. In 'Preferences', I have navigated Convert to PDF > Microsoft Office Office Word > Edit Settings > Add Links to Adobe PDF File and confirmed that the Add Links feature is enabled. Having ascertained that this glitch is not specific to either XP64 or XP32 operating systems, I uninstalled Acrobat 9.2 Pro from the XP32 computer and reinstalled Acrobat 6.1 Pro. Then using the same Word 2000 document, I converted to .pdf using Acrobat 6.1 Pro, with no problems whatsoever. This looks like a serious bug in Acrobat 9 Pro, which the telephone support folks have acknowledged. Alas, they won't give me the tiniest clue how to resolve it, nor any workaround, but merely refer me to AdobeForums.com for help. I suspect a corrective patch or 'upgrade' will be forthcoming, but meanwhile, if anyone knows of a workaround, please enlighten me. Thanks. /rmbrown

Thank you, CtDave, for your speedy reply and for the 'Acrobat Technical Evangelist' knowledge base article. Word 2000 is one of Microsoft's masterpieces - by disabling 'autosave', the application is totally stable, does not require 'activation' by Microsoft. Acrobat 9 enables 'saving' of interactive .pdf forms, a most valuable feature and one much appreciated by anyone completiing such forms. There must be more to this issue than 'incompatibility', because I can create a test Word 2000 document, hyperlink a valid URL, convert to .pdf with Acrobat 9, and the hyperlink works fine in Acrobat 9. When I attempt to do this using a much more complex Word 2000 document, embedded with scores of hyperlinks, these links fail to work following conversion to .pdf with Acrobat 9, but work fine following conversion to .pdf with Acrobat 6. I can then use Acrobat 9 to open the .pdf created with Acrobat 6, and successfully edit any of these fully functional hyperlinks using the 'Link tool'. I don't know who prepared the 'Acrobat Technical Evangelist' article (AF1908DCd01) - no credits were cited, and I'm far from certain that this authentically belongs to Adobe's knowledge base. So I appreciate your sharing this information with me, but I cannot say that my question has been definitively answered. If you have any further information or tips, please reply in this thread. /rmbrown

Destinations from an HTML file not working with Acrobat XI

When the link is executed in Acrobat X it opens to the correct destination. When opened with Acrobat XI it doesn't. In fact, when I open the PDF (created with Acrobat Pro X) with Acrobat Pro XI I don't see any destinations... I don't see where to view them if they do exist. I already tried disabling the protected settings in XI and that didn't work. What happens is a dialog for downloading the PDF opens and your only choice is opening the PDF to the first page (instead of the destination). This is also happening on all browsers... so I am suspecting something buried in the Control Panel. Please help.

Thank you but this doesn't help... I know where the destination pane is... that's how I created them... Acrobat XI is not showing the destinations but the issue is Acrobat XI opening a download dialog instead of following the destination. I think it's an application or Windows issue but I don't see it...

How work all field in reader created with acrobat

All fields are created with acrobat.Some fields such as attachment button (app.execMenuItem("AddFileAttachment");) are not work in reader though I have used "reader extended PDF" contained in acrobat. How can I able to use those fields in reader? Please help me.
Would you tell me What is reader extended right? How can I use it? What kind of software is needed?

Thanks for response and helpful answer.
Would you tell me what sould I do to install Turnkey at first? From Where I can download JBoss?
In addition, I have already installed LC design with Acrobat X pro

Posting document not created (Pricing Error)

Hello Everybody,
I have a problem with a invoice. If i go to VF03, I can see a positing status as F Posting document not created (pricing error). The error message is showing as pricing error in item 000010 Message No. VF 073. Kindly help me how to unblock this invoice.
Your help much appreciated.
Regards,
Ravi

Hi,
I think problem is in VKOA settings. Please go to VF03. Press Shift + F11. System will lead to Revenue Account Determination analysis. Please check the settings.
Regards,
Jigar

Xref table is missing when a pdf file is created with acrobat distiller 9.0.0

Hi
I created a pdf file with the new acrobat distiller 9.0.0 and i noticed that the xref table is missing in it.
Whereas the pdf files which created in older version (acrobat distiller 7.0.5) had the xref tables.
As i have written a perl script to open the pdf files (used a ready made module downloaded form cpan.org). The script works fine with all old pdf files but fails when it tries to open the pdf files created with distiller 9.0.0.
Could i know is any thing changed on acrobat distiller 9.0.0 ?
Thanks
Balaji.

PDF documents of version 1.5 and higher can contain cross-reference streams. Read the PDF Reference.

Does only Adobre Reader "reads" the fields of a PDF when created with Acrobat?

I created a PDF with several fields and exported it.
Then I tried to open it with Firefox and the fields didn't appear.
But it works OK with Adobe Acrobat.
Does only Adobre Reader "reads" the fields of a PDF when created with Acrobat?

Adobe software reads form fields. The rules for how to do form fields are a part of the PDF standard (a book available to anyone) but some companies ignore it and others do half a job. To be safe, use only Adobe Reader. And beware of browsers that ignore Adobe Reader even if you have it.

Posting Document not created (export data missing)

We are working on ECC 6.0 and during creation of Cancellation Billing document type IVS for the Intercompany billing, the document did not create Accounting document giving the Posting status as G - Posting document not created (export data missing). However checked the Foreign trade data and the system states that Foreign trade is complete.
Can any one suggest the solution for this?
Thanks.

Hello Mohammad,
About this issue, the incompletion of this cancellation document
arises might because the reference delivery has been archived/deleted.
This is likely due to your current copy control settings (VTFL).
If you have set ' ', in the export determination field this means that
there is a common 'exnum' key between the delivery and billing documents
LIKP-EXNUM & VBRK-EXNUM are the same.
The result of deleting the delivery is that you also delete the FT data
for the delivery, Because the billing document and delivery share the
same foreign trade table entries, you have in effect deleted the FT data
of the billing document too. This would most likely go unnoticed but if
you then cancel the invoice the system has no FT to copy into the new
cancellation billing document, which leads to this issue.
Firstly you should set the export determination flag in the copy control
of the delivery & billing documents. This will avoid this issue in the
future. Set it to to 'A' or 'B' depending on your requirements.
For the incomplete cancellation billing document, you could use userexit to
set it as complete:
You can use transaction CMOD.
Create a project for example FT project button create short text: ....
drop button Enhancement assignment & save use for example local object.
Use the F4-help for Enhancement and look for V50EPROP.
Drop button Components:
here you will find EXIT_SAPLV50E_005 and EXIT_SAPLV50E_006
In the userexits doubleclick on the includes ZXV50U05 and ZXV50U06
The coding in the userexits should be: C_COMPLETE = 'X'.
Afterwards activate generate ... and save.
The development class is VEI.
Please also check note 118573 which explains the FT user exits.
Regards,
Alex

Files not created with iTunes do not play from remote iTunes library

I hve ripped a large part of my CD collection into music files into FLAC format. I have since converted my music files from FLAC into Apple Lossless Audio Codec (ALAC) format and imprted them into iTunes.
The files play with no problem on iTunes if they are on a local iTunes library. Furthermore, all metadata such as tags and album cover art information are properly displayed in iTunes. This is true whether I'm running iTunes on a Windows XP box or a Mac OS X box. I have since imported many other CDs into my iTunes library using iTunes to encode into ALAC.
If I share the iTunes library on my Windows XP machine to iTunes running on a Mac OS X box or to an Apple TV, I can:
*play songs that were imported directly using iTunes
*not play any songs that were not created with iTunes
This behavior is true whether I'm trying to play them from either a Mac or from an Apple TV.
If I copy the *.m4a files to the Mac and import them to the iTunes library I have no problems playing them on the Mac. I have not tried sharing the iTunes library on the Mac and tried accessing the files from the Apple TV or the Windows PC.
Any thoughts?

Fix: optimize m4a files moving the meta data to the beginning, whilst optionally creating a hint track (used for streaming m4a over Apple Airtunes).
see: http://www.dbpoweramp.com/codec-central-m4a.htm

Pl/sql Procedure is Not Creating With the CLOB data Type

Hi,
I am Using Oracle 10g Express Edition Release2.... My Doubt is While creating a table With CLOB Data Type the table is created successfully,but while Creating a Procedure With the CLOB Data type i am getting an Error Message
2667/5 PL/SQL: Statement ignored
2667/24 PLS-00382: expression is of wrong type
then i tried With the Varchar2(30000) the Procedure is Created Successfully note i have not changed any thing in my code except the data type.
I am Just Confused ......Why the Procedure is not Created with CLOB Data type?
Please advice ...
Thank U
SHAN

hi,
Thanks for reply....Another Example
CREATE TABLE USER_MAS (USER_ID VARCHAR2 (20 Byte),MAIL_ID VARCHAR2 (255 Byte));
set serveroutput on
declare
atable varchar2(64) := 'USER_MAS';
acolumn varchar2(64) := 'MAIL_ID';
avalue varchar2(64) := 'NEWYORK' ;
dyn_sql clob;
begin
dyn_sql := 'update '||atable||' set '||acolumn||' = '''||avalue|| '''' ;
dbms_output.put_line(dyn_sql);
execute immediate dyn_sql;
end;
commit ;
Error at line 2
ORA-06550: line 9, column 23:
PLS-00382: expression is of wrong type
ORA-06550: line 9, column 5:
PL/SQL: Statement ignored
When i Changed the Data type to varchar2(64)
update USER_MAS set MAIL_ID = 'NEWYORK'
PL/SQL procedure successfully completed.
Commit complete.
I like to Know the Reason Why the Procedure is Not Created in Oracle 10g XE DB
Note :the Same Script i used in 11g DB the Procedure is Created Successfully....
Why you need use CLOB or VARCHAR2 in your temp_num variable as you sending parameters as number?
In the Procedure we are create some run time queries while executing the procedure. There are around 10 run time queries created.
The size of each query is more than 4000 characters . We then add all the queries using union all after each query to the clob variable as the normal varchar will not support.
Please Advice
Thank U
SHAN

Unable to open pdf created with Acrobat Pro using Adobe Reader X

Files created with some Adobe Professional applications such as Acrobat Pro ensure the file is small by excluding font information from the file. Simple pdf creation applications embed the font in the file, which makes for transportability between apps but does make the files big.
The problem i have experienced is that Adobe Reader X is one of the simple app varieties, so is unable to open, print, or read files created using Adobe Acrobat Pro..
i'd welcome any help in (a) finding a free app that opens these 'pro pdf' files, OR (b) an option setting in Acrobat Pro which includes the font information in the file - or both!

There are so many things wrong, around a tiny grain of truth, it really isn't worth examining. Not at this stage if you are more interested in getting things working. It may be worth asking you though, since Reader doesn't even launch for you, how you came to focus on font embedding being the cause.
Ok, Reader doesn't launch. Suppose you start Reader FIRST. Then use File > Open on your PDF.

Calibri font not printing - created with Acrobat XI pro 11.0.4 in Word 2007

Hi, we recently upgraded to Adobe Acrobat XI pro (11.0.4) and when we create a PDF in Word using the Calibri fonts, it doesn't print when using Adobe Reader X.
Prints ok when using Quark or other software, just not working with Office.

Thanks for your answer.
We are in a controlled office environment and unfortunately we cannot receive updates due to company policies. We have to wait until they do another "package" with an upgraded version.
It's printing ok with Adobe Reader XI, but not Reader X (which is our actual default Reader). And again they cannot install Reader XI to all (only me since I'm a graphic designer, I have admin rights). We tried on other printers, not working too. Font is embeded too. It's working when using another PDF maker (like we have PDF X Change, it's working). Was working also with our previous Acrobat X Pro.

Can't open lotus notes links with acrobat reader XI

We had acrobat reader 9 a few month ago. We did an upgrade to XI. Since the upgrade, we can't open lotus notes link in PDF. I receve a message : Could not open the file 'Notes://<server>/85256E990056A5F7/428FA5DA3ED9D82485256E6D005FA7AB/ED916EF56E1CC50B85257 545005AB67B'. (<server> is the name of my server)
The path is working. I can paste it in run and it's working. If I downgrade to reader 9, the link work with the same PDF.
I did some trace with procmon and I can see acrobat trying to open C:\WINDOWS\system32\Notes:\<server>\85256E990056A5F7\428FA5DA3ED9D82485256E6D005FA7AB\ED9 16EF56E1CC50B85257545005AB67B
I can't find anything about this issue...
anybody has an idea?

Having the same issue, Any hint ? Is Adobe aware of this problem ?

Fscommand is not working when opening PDF document in browser with Acrobat 9, why?

We embedded a flash application in PDF using screen annotation. In the flash we use fscommand to call methods available in AcroJS. In acrobat reader 9, if we view the document in Internet Explorer, we receive a security sandbox violation message saying that it cannot make fscommand calls to <unknown> (allowScriptAccess is ). But when we open the document in Firefox, it works fine.

Have a read of this article on the web:
http://www.actionscript.org/resources/articles/99/1/FS-Command-JavaScript-Library/Page1.ht ml
The part that caught my eye was the following:
"...These methods will not work with Internet Explorer on Macs. This lack of functionality is a brower issue with communication with plugins and cannot be resolved by anyone except MicroSoft. "
I wonder if the same is true for Windows?
Sabian

Opening post-it notes created with Acrobat X

Similar Messages

Maybe you are looking for