Opening Premier Elements 3.0 Project in Premier Pro CS3!

Hi When I try to open the project that is saved in PE into PPRO CS3, all the media files are seen, but nothing on the timeline.
Is it not compatible?
I want to edit the composition and clips in CS3, is it possible?
Or is there a way I can convert the PE project to PPRO?
Thanks in advance.

just double click the sequence in the project window and it will load to the timeline

Similar Messages

  • Premier Elements 12, windows 7 64 bit pro

    When editing, half way through my program, when DTI is moved when I make a cut, the video on the time line that is visible does not change.
    I quiet and started again, and the same happened when I was half way through my program
    [email protected]

    I have three cameras. I add three videos to the time line. One on top of
    the other. I change cameras after about 40 seconds.
    I am not using a switcher and thanks to adobe, I have no need for that.
    I have been using Adobe since Premier Elements 9. Normally I have no
    problem. Yesterday this started. It is strange.
    I will try to burn a disk and see if it comes out right, if not then I
    will try another video. Maybe that will make a difference.
    I doubt that would make a difference. My you have an opinion???
    Thanks again
    Jim
    >
          Re: Premier Elements 12, windows 7 64 bit pro
    created by A.T. Romano <http://forums.adobe.com/people/A.T.+Romano> in
    /Premiere Elements/ - View the full discussion
    <http://forums.adobe.com/message/6133467#6133467

  • How to bring an Avid project into Premiere Pro CS3?

    My client has an old Avid project that needs to be re-edited. I'm using Premiere Pro CS3. Can easily purchase any necessary conversion software (NOT going to buy Media Composer :P). Is there any way to 'easily' import it?
    I'm familiar with the Automatic Duck software suite, but they don't seem to have an option for conversion to PPro. What about converting from Avid to After Effects, and then somehow importing the After Effects into PPro?
    I'm extremely new to EDLs and very hesitant to use them :). Any advice?

    I've had some degree of success going from Avid to PPro through the use of AAF (Advanced Authoring Format). If the project is really complex, the transfer may not work that well, but I was surprised to see just how much transferred cleanly. Check the Avid documentation for exporting a project as an AAF, and the PPro documentation for importing.
    One thing to note is that you will have to recapture the media from the original source tapes, as PPro will not work with media files created during capture on an Avid system.

  • Opening Final Cut Studio 3 Projects on Mac Pro (Snow Leopard) & MacBook Pro (Lion)

    Hi Everyone,
    Right i've been trawling the forums in regards to Lion's compatibility with Final Cut Studio 3. There seemed to be a mixed bag of reports, some running FCP fine on Lion, others having issues.
    For this reason alone I decided to keep my main editing system, my Mac Pro, running Snow Leopard 10.6.8 and not upgrade to Lion.
    More and more frequently i've thought I need to get myself a MacBook Pro, for data wrangling on location and for some cheeky edit sessions when i'm away on jobs.
    The thing is, all new MacBook Pros ship with Lion as their OS.
    My question is twofold really. Firstly, I've read that Final Cut Studio 3 installs and runs fine on Lion systems, can anyone confirm this?
    Secondly, do any of you know if i'll be able to swap between, and freely work on projects across the two different systems, namely a Mac Pro running Snow Leopard and a MacBook Pro running Lion? is this an issue at all?
    The last thing I want to do is spend three grand on a MacBook and then realise I have issues opening or working on projects from my MacPro (or vise-vesa)
    As ever, your help would be greatly appreciated...
    Thanks in advance,
    Scott

    I've read that Final Cut Studio 3 installs and runs fine on Lion systems, can anyone confirm this?
    Yes, FCS 3 installs and runs without issue on my Lion system.
    There are a couple of careats however  with the primary one being  DO A CLEAN INSTALL OF THE OS AND THE APPS. Upgrade installs over major version changes are problematic.
    do any of you know if i'll be able to swap between, and freely work on projects across the two different systems, namely a Mac Pro running Snow Leopard and a MacBook Pro running Lion? is this an issue at all?
    Again, not an issue in my world.
    x

  • Exporting project from Premiere Pro CS3 to Encore CS3

    If I export and specify no menues and specify burn, medium quality to DVD, Encore asks me to insert blank media into a CD R/W drive. I have to cancel the operation and select the DVD R/W drive that is also displayed in the device delection.. How do I make it default to the DVD R/W drive when asking for blank media?

    Starting with a search is always a good idea... here is some previous discussion
    http://www.adobeforums.com/cgi-bin/webx?128@@.3bc4c6ee

  • Premier Elements 12 zoom vs crop

    On some clips the default pan and zoom tool does a pan and zoom, but on other clips it does a crop and pan (without me changing anything).  I don't want the crop... I want it tpo zoom and pan all the time for this project.  I've right clicked everywhere I can think of and don't come up with a settings menu.  Is there a settings menu other than via the Applied Effect toggle (which doesn't have a setting I can see for this cropping issue).
    Also, when I've created a sequence of focus frames, I can access the marker in the in the timeline to move the focus frame.  When I click on a marker it jumps the CTI to that spot, but doesn't allow me to grab the marker.  Is there a setting I'm missing, or is there another way to move the marker. 

    See workflow below... Bill Carberry
          From: A.T. Romano <[email protected]>
    To: Bill Carberry <[email protected]>
    Sent: Monday, December 22, 2014 9:53 PM
    Subject:  Premier Elements 12 zoom vs crop
    Premier Elements 12 zoom vs crop
    created by A.T. Romano in Premiere Elements - View the full discussionastrofun I have not finished by testing on the issue that you present. I created an 4K video so that I would work through the details that you are presenting. In spite of these  zoom and crop that you feel are occurring randomly and for which you seek an explanation, are you getting the wanted pan and zoom effects when the video returns to the Expert workspace Timeline from the Pan and Zoom workspace. I am suspecting that this zoom and crop that you are seeing is solely in the Pan and Zoom workspace and are reflecting the mechanics of your establishment of the focus frames as you move the Timeline Indicator from the first focus frame  (first frame of the video) from left to right.  Not exactly sure what you mean!  
       - I highlight my clip, then open Pan and Zoom tool
       - When opened, the tool has 2 focus frames marked... one at each end of the clip.  I am not able to grab the marker and move either of these on the timeline (or any subsequent time frames).  Once I create a frame its there... I can't mover it by the marker (as soon as I click on the marker the CTI comes to that spot, and I can't get to a menu or screen change when I click on the pan duration
       - What I have been doing is deleting the default focus frame #2, moving my CTI to the place where I want a pan to stop, and inserting a new focus frame, then size and locate it on my image.
       - Follow this exact procerdiure and on some clips I get a zoom with the whole frame filling the screen, and on some clips I get a crop with only part of the screen being filled.  
     I will try to post some screenshots in the morning to show you were my thinking went on that. ATR If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7038598#7038598 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7038598#7038598 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" 
    Start a new discussion in Premiere Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Can't install Premier Elements 10 on Win 7 32 bit, quad core 2.40ghz, install package not compatible with my processor type

    Hello All, I am trying to install Premier Elements 10 on a Windows 7 Pro box 32bit running an Intel Q6600 Core 2 Quad Core @ 2.40ghz, 2gb ram, I get the following error " This installation package is not supported by this processor type, Contact your product vendor."," What's wrong?

    Interesting, I guess I need to call the Alienware folks and find out why they installed a substandard processor in such an expensive gaming box. I do have several other processors I can swap it out with, do you have a recommendation on a good processor that will get the job done? Learning is never a waste of time, but giving up is. Thanks for your insight,

  • Unable to load or uninstall Photoshop Elements 11 or Premier Elements 11

    Not sure what happened, both Photoshop Elements 11 and Premier Elements 11 were working properly.
    Now, trying to launch Photoshop Elements 11 gets error message Elements Organizer - Photoshop Elements cannot start or continue because of missing file(s). Please reinstall.
    Attempting to reinstall Elements 11 gets error message Error 1316. A network error occurred while attempting to read from the file C:\Windows\Installer\Adobe Photoshop Elements 11.msi
    Trying to launch Premier Elements 11 gets message Configuration Error. Please uninstall and reinstall the product.   Error: 1
    Uninstall of Elements 11 appears to progress normally, but uninstall ends and install begins, error message is Setup Error 2755. Server returned unexpected error 1605 attempting to install package D;\Adobe Premier Elements 11\PRE 64\Adobe Premier Elements 11.msi
    Any help appreciated.
    Thank you.

    thanks.
    That brings up program Properties Screen ... I have looked at all tabs but do not see any way to reset preferences

  • Problems with downloading Photosop Elements 12 bundled with Premier Elements 12

    I purchased the online version of Photoshop Elements 12 bundled with Premier Elements 12. Only the Premier Elements (Video) loaded andis available to use. How do I acces the Photoshop portion of the download?

    Southern paperazzi have you contacted your I.T. department or disabled any security software which maybe preventing the installation from completing?

  • Codec Code Premier Elements 13 missing

    I just buy the newest Version 13. Unfortunately I can not see Movies from older Version such as PE12. How can I get the missing Codec Code? Thanks for any help

    Many Thanks for your support. I download the new version of QuickTime and it works now, happy!
    Thanks again
    Placi
    Von: A.T. Romano 
    Gesendet: Samstag, 1. November 2014 17:13
    An: Placi Simonet
    Betreff:  Codec Code Premier Elements 13 missing
    Codec Code Premier Elements 13 missing
    created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano>  in Premiere Elements - View the full discussion <https://forums.adobe.com/message/6889785#6889785>

  • Premier Elements 11 transfer

    How do I transfer premier elements 11 to a new macbook pro without disc drive?

    You can download from the Adobe site and then use the serial number that came with the packaged disc you have.
    Although if your Macbook Pro doesn't have a disc drive, I've got to wonder what's up. Is Apple charging extra for disc drives now?

  • Trouble downloading Premier Elements 13

    Just upgraded from Elements/Premier Elements 9 to 13. Premier Elements won't download (plus I have a very slow download speed in my area). Cookies enabled. Thoughts?

    if you follow all 7 steps you can directly download a trial here:  Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
    and activate with your serial number.
    if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

  • Opening old Premiere Projects in Premiere Pro CS5

    I have some old video projects which I've saved to disk with the idea that I could go back and edit them later.  I just tried to open one of these old projects in Premiere Pro CS5 and it doesn't recognize the old Premiere Pro project.  PP CS5 projects now end with *.prel or *.prproj.  My old projects (some done in Premiere 6, some in PP CS) ended with *.ppj.  I opened the *.ppj file properties and tried changing them from "Opens with Adobe Premiere Pro CS" to "Opens with Adobe Premiere Pro CS5", but it looks like the file suffix remains *.ppj and PP CS5 still doesn't recognize it.
    Is there a way I can convert my old PP projects to PP CS5 so they can be opened/edited in my current software?
    Thanks.
    --Dave

    David,
    Per my earlier post, if you change that from All Supported Media to All Files, can you Import?
    [Edit] I see that All Files did work, and that you are up and editing! That is great news.
    As mentioned, the only issue that I had was with a very few 3rd party Transitions, and PrPro was nice enough to tell me exactly where these were used, and what their names were. I just wrote down those TimeCodes, added Cross-Dissolves to replace whatever the previous editor had used, and was up and editing.
    Now, I did have to go through the "Where is file ____?" process, as the previous editor had drawn Assest from ALL over an external HDD, with no folder structures, or anything useful - what a kludge! I organized all of the Assets (many thousands) into logical order, and once I had re-established the links, all went beautifully.
    Good luck,
    Hunt
    PS - the reason that I asked about platforms is that Pr was X-platofrm, but then with PrPro, through version 2.0, it was PC-only. It was not until CS3, that it went back X-platform. This created a little problem for Mac users, with newer PrPro versions, but older PC Projects. We get about 1 of these issues per year, and the answer is for the Mac user to befriend a PC-person, with the right version of PrPro, do that Import step, then Save_As, and hand off the now, X-platform version of the PRPROJ. Hey, it fosters "hands across the aisle," and we've found several PC-users, with the right versions around here, who have done that conversion, out of the kindness of their hearts. That had zero to do with your Project, but wanted you to know why I asked.
    Message was edited by: Bill Hunt - Added [Edit] when I saw the last response.

  • Problems with Premier Elements 7 Opening Earlier Projects

    I have used Premier Elements 3 to create many 15-60 minute videos, most built from Photoshop Elements slide shows imported into Premier, and most with DVD output designed. After installing Version 7, I attempted to open these projects which it is supposed to do. A minority will open fine. The balance either cause the error "The project cannot be loaded - it may be damaged or contain outdated elements".
    Does anyone else have these types of problems? I have tried all of the various methods outlined in the KB, like deleting preferences, etc., removing and re-installing, booting with nothing else loaded, etc. Nothing has any impact. I have talked to Adobe support and they are clueless and just walk me through the usual install/uninstall, etc. can anyone help? I have an enormous investment in time in these 3.0 videos and I bought Version 7 to upgrade and now it does not work! Thanks.

    Just a thought....
    How are you opening the Premiere Elements 3 project in Premiere Elements 7?
    According to the Adobe party line Premiere Elements 7 PDF, you can open projects created in earlier versions of Premiere Elements in Premiere Elements 7, but you cannot open projects created in Premiere Elements 7 in earlier versions.
    Do you have Premiere Elements 3 and 7 on the same computer at this time?
    The Adobe suggestions is, if problems in this regard and instead of right clicking the project file in its saved location, then:
    1. open the project from with Premiere Elements 7
    or
    2. right click the project file in its saved location and name Premiere Elements 7 as the Open With program
    Check it out to see if I have interpreted this info correctly
    http://help.adobe.com/en_US/PremiereElements/7.0/WSB51FF526-3E14-430c-B388-FD0B747547E9.ht ml

  • I Just tried to open a premiere elements 10 project in premier pro cs6

    I Just tried to open a premiere elements 10 project in premier pro cs6 but gave me this message.
    Please help.

    http://helpx.adobe.com/premiere-pro/kb/missing-sequence-presets.html

Maybe you are looking for