Opening premier elements for first time. Been "gathering user info" for 15 minutes...what to do?

Opening premier elements for first time. Been "gathering user info" for 15 minutes...what to do? Previously hit "organize", ran for 25 min till hit 100%, then "had to close"?

Unfortunately, there's not enough info listed to give you an effective answer.
Can you give more detailed system spec's. There are a lot of differences in RAM, & Hard Drive Technologies. Is your 2TB a single hard drive, or multiple drives in RAID? While a single 2TB drive is nice for the storage capacity, they also sacrifice some performance to reach that capacity... What speed is the RAM, & I'm assuming it's properly opperating in Dual Channel mode (watch your POST screen to be sure). Which Core i7 CPU are you running, & what Operating System are you running. Finally, bring up your task manager, & see what processes are using CPU cycles. Also, are you starting up PrE8 through the default shortcut which uses the Welcome screen?
A quick guess is that Auto Analyzer & the Welcome screen are behind your troubles, but can't be sure till more info is available.
There is a current thread about Auto Analyzer, & I've posted a way to bypass the Welcome screen in several threads.
See my post in this thread to bypass the Welcome screen http://forums.adobe.com/thread/516524 (2nd post in thread)
Message was edited by: chaosdsmFL - added link

Similar Messages

Data Overages for first time with no change in usage. What's up?

I see there are numerous posts about unexplained data overages. I think Verizon is manipulating the data changes somehow. I have always used about 2 gig a month, but had a 4gig plan. Never went over. Then one morning I had a text that I had used 75% of my date. Somewhat surprised, but I drove to work, none of my devices on. When I turned on my phone it said I had used 90% and within minutes said I had exceeded my data. I called Verizon with a lot of questions as how could that have happened. I was not given a response that made any sense but was told they would increase my data plan to 6gig for no additional charge. I agreed. Now at the end of this month the same thing happened. I went over my 6 gig with no changes in my usage. I do not stream music or watch videos, etc. No way I could have used that much. It showed I used 1.6 gig in one day, that's what I used to use for a month. Something is not right. What agency governs cell phone companies. We all need to report this.

Softtailrn
It all comes down to those "pre-installed apps" and their updates that just won't stop downloading.
today, I realized that my phone was running kinda slow, so I went into the application manager and started deleting apps, and their updates. It took me a good hour to get all the useless ones out of the way, when I accidentally deleted all my contacts. Since my contacts was really the only thing I cared about, and now they're gone, I decided to go ahead and do the factory reset. Why not? So I started all over again like it was a new galaxy s5. My contacts came back no problem, and so didn't all those useless apps I deleted, so on my way back to the app manager to start deleting them again... I checked my data usage and how many gigs I had just freed for myself... a whole 8.57G out of 16G now freed up! nice right? Yea, then I see that little exclamation point in the top left corner, it said 30 apps have been upgraded, and there was nothing I could do to stop this, I don't want to go through all those apps and updates for a 3rd time. I thought, how much data is that gonna use? Turns out... 2.74Gs in 20 seconds and that was olny just 20apps, out of what 130 apps? That are being updated regularly everyday
Now I'm starting g to make sense of it now... my parents knew we were being had, for awhile now, just didn't know how. We've been talked into getting a 4G family data plan, charged over 900.00$ verizon bill, charged for data overages where we too don't use our phones for anything other than phone calls, or looking up something on the net. No music, no movies, none of that fun stuff. I see that in a matter of 20 seconds our data limit of 3G is just 1/4 away from gone, and that's just, what? 1 or 2 unwanted updates away from another overage charge? So I try to stop these updates by selecting in the Google play settings "do not update apps" but that simply doesn't work. It seems by simply connecting to WI-FI will negate my command.. and the updates keep coming. Only by shutting off both mobile data and WIFI seems to stop the updates... temporarily. It's hard to explain but it looks like verizon is using Google play app updates to max out data, and verizon is charging us for overages 2 and 3 times a month! They manipulate the data to make money, Stealing, and we're not the only ones, you caught them too ^^^. This is criminal, and something does indeed need to be reported to a proper governing body above verizon.
This has been going on in my family unnoticed for years, until now.
Resulting in ridiculous bills, coupled with false overage charges. Causing nothing but heartache and stress for my family, but we still pay... God I don't know why. But we do, and they just keep Taking.
I found out their heartless corporate bullying tactics against the little people, and you did too ^^^ they just keep throwing new "plans" and "6 more gigs" at us.
They sneak these updates right under our noses, blow up our data and threaten us to pay, or else we'll be blackballed from cable/Internet everywhere.
this is nothing else but criminal, rigging the game.
We don't want more gigs, we want our money and out mental health back!

Why is it when I launch Element 9, the window says "gathering user Info"?

The bar on this window continues to spin, but nothing EVER happens. It never really shows me any user information. Not sure what this is even supposed to do since it never works.

No, I mean you can log out until you are in PSE, then log in if you want to be connected. Or stop syncing before you launch PSE. Usually once you've eliminated the hung connection attempt it will work okay until the servers go weird again.
BTW, you seem to think I work for adobe. I don't.

Gathering user info

Using elements 8 and windows 7. When I open Elements, the bar that says gathering user info rolls forever. I have let it run for an hour and it never finishes. Is something missing on my PC? DoI need to reinstall?

The best thing to do is to just skip the unwelcome screen. Go into the program files or, if you have a 64-bit system, program files (x86) and find the actual editor and/or organizer and make desktop shortcut(s). Then use those in the future instead of the welcome screen.

I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks. I am unable to find where and how to do this without losing the project I have been working on. Please help?

I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks. I am unable to find where and how to do this without losing the project I have been working on. Please help?

Vere Clarke
Premiere Elements 9.0/9.0.1 and Premiere Elements 13 are standalone products.
So, you can have both on the same computer, but only open one for your work.
The classical recommendation is to finish a project in the version in which it was created since there
is no guarantee that a project from an earlier version will open in the later version. Probably will, but
no guarantees. And, when you do explore this, do it from a copy of the earlier version project. Once you
take the earlier version project into a later version one, you cannot go back to edit the later version edited
project in the earlier version program.
If you have both versions (9 and 13) on the same computer and you have not moved, deleted, renamed any of the version 9's files/folders,
right click the saved closed Premiere Elements 9.0/9.0.1 project file, select Open With, and then Adobe Premiere Elements 13.
(Your 9.0/9.0.1 saved closed project file should be found in Libraries/Documents/Adobe/Premiere Elements/9.0.)
Please review and consider. If any questions or need clarification, please do not hesitate to let me know.
Thank you.
ATR

Lov is not validating when i open a form for first time

hi all,
i am using form6i.
i have one multi record block. in which lov is attached to it.
but when i open the form for first time the item corresponding the above said is not showing and if i enter the value then also its not validating against. its showing error frm-40210
but when i click on other item and come to this item Lov is showing.
what could be the reason for this strange behaviour.
i have checked set_item_properties too(there is properties have been set)
Please advice.
Thanks..

FRM-40210: Search string not found.
what could be the reason for this strange behaviour.Do you have an "Initial Value" set for the item? Do you have the "Validate from list" property set to yes or are you setting the initial value through code?
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Long time to open workbook for first time

Hi,
I have a workbook with three queries . Performance of workbook is good when it was created for first time. It has additional 22 sheets with formulas and other sheets with values based on query sheets.
The problem starts after I close the existing session and open in another session when it takes 15 to 20 minutes to come up.But after that the book is slow even for single click button action.
Version of analysis 1.4.6
Win 7(64 bit)
Ms office 2010(32 bit)
Refresh on opening is disabled.
Few thing which I did:
>> I opened up task manager and did analyze wait chain, I found that excel.exe is waiting for splwow64.exe process.
>> I enabled logging at "debugging information" in support setting for workbook and checked things out in log file.
Found that
There was warning "AddSerializer failed (Command processors not initialized)
Looking at log file for events when book took time to open, I found that time stamp gap between following events"
-verbose: Working mode as serialized in document:'Local'
-verbose: Successfully deserialized system info from workbook XML
- verbose: ...its logs various properties of queries like query name,id etc"
and its immediate previous event of cache formula string is 20 mins.
>> in another session I opened a workbook with normal performance.Found above mentioned warning message and deserialization... information.
the difference in this case is that there is not delay in events.
Has anybody faced this issue? Any idea on deserialization of workbook xml in analysis.
Any idea where is metadata saved in analysis. is it in form of some hidden script object just as in BEx 7.0
Thanks
Pramod.

Hi Pramod,
Since you have several sheets in this workbook, have you checked the number of custom styles?
Please check the SAP note http://service.sap.com/sap/support/notes/1899658
According to the note, too many styles slow down Analysis for Office.
The note also contains a macro that you can run on your workbook to delete the custom styles if you want to check.
Regards,
Filipe

Itunes application error when attempting to open for first time. HELP

Running windows xp pro, just bought new ipod classic, installed itunes software. When attempting to open for first time i get an itunes.exe - application error, error message that reads "The instruction at "0x100001040" referenced memory at "0x100001040". The memory could not be "read". Click ok to terminate the propgram. Click on CANCEL to debug the program. I have tried re-installing several times, cleaned temp etc. Nothing. Please help, i really want to start using my new ipod.

You have to unhide your library folder and adjust the user permissions to allow write access.
Mylenium

Firefox 3.6.6 for Windows opens blank window the first time it is launched

Firefox 3.6.6 for Windows opens blank window the first time it is launched
== This happened ==
Every time Firefox opened
== Upgraded to 3.6.6

Hello Gary.
Go into ''Tools > Options > General > Startup:When Firefox starts:'' and configure it as you like.

When i want to purcahase for first time on itune,,it said this ID have never been used on itune .how can i use my ID to purchase it if this is my first time?

when i want to purcahase for first time on itune,,it said this ID have never been used on itune .how can i use my ID to purchase it if this is my first time?

Hi Zannat,
Don't get scared. Cookies are the small file which stores your settings for a website, such as location details, login details, language details and so..
Some sites don't care about your cookies settings but some other sites instructs you to enable cookies in your browser. Enabling cookies is too easy.
Just follow the instructions which explained [[Enable and disable cookies that websites use to track your preferences |here]] .
Thank you!!!

Performance issue in browsing SSAS cube using Excel for first time after cube refresh

Hello Group Members,
This is a continuation of my earlier blog question -
https://social.msdn.microsoft.com/Forums/en-US/a1e424a2-f102-4165-a597-f464cf03ebb5/cache-and-performance-issue-in-browsing-ssas-cube-using-excel-for-first-time?forum=sqlanalysisservices
As that thread is marked as answer, but my issue is not resolved, I am creating a new thread.
I am facing a cache and performance issue for the first time when I try to open a SSAS cube connection using Excel (using Data tab -> From Other Sources --> From Analysis Services) after daily cube refresh. In end users system (8 GB RAM but around
4GB available RAM), for the first time, it takes 10 minutes to open the cube. From next run onwards, its open up quickly within 10 secs.
We have daily ETL process running in high end servers. The configuration of dedicated SSAS cube server is 8 core, 64GB RAM. In total we have 4 cube DB - out of which for 3 is full cube refresh and 1 is incremental refresh. We have seen after daily cube
refresh, it takes 10 odd minutes to open the cube in end users system. From next time onwards, it opens up really fast with 10 secs. After cube refresh, in server systems (32 GB RAM, around 4GB available RAM), it takes 2 odd minutes to open the cube.
Is there, any way we could reduce the time taken for first attempt ?
As mentioned in my previous thread, we have already implemented a cube wraming cache. But, there is no improvement.
Currently, the cumulative size of the all 4 cube DB are more than 9 GB in Production and each cube DB having 4 individual cubes in average with highest cube DB size is 3.5 GB. Now, the question is how excel works with SSAS cube after
daily cube refresh?
Is it Excel creates a cache of the schema and data after each time cube is refreshed and in doing so it need to download the cube schema in Excel's memory? Now to download the the schema and data of each cube database from server to client, it will take
a significant time based on the bandwidth of the network and connection.
Is it anyway dependent to client system RAM ? Today the bigest cube DB size is 3.5 GB, tomorrow it will be 5-6 GB. Now, though client system RAM is 8 GB, the available or free RAM would be around 4 GB. So, what will happen then ?
Best Regards, Arka Mitra.

Could you run the following two DMV queries filling in the name of the cube you're connecting to. Then please post back the row count returned from each of them (by copying them into Excel and counting the rows).
I want to see if this is an issue I've run across before with thousands of dimension attributes and MDSCHEMA_CUBES performance.
select [HIERARCHY_UNIQUE_NAME]
from $system.mdschema_hierarchies
where CUBE_NAME = 'YourCubeName'
select [LEVEL_UNIQUE_NAME]
from $system.mdschema_levels
where CUBE_NAME = 'YourCubeName'
Also, what version of Analysis Services is it? If you connect Object Explorer in Management Studio to SSAS, what's the exact version number it says on the top server node?
http://artisconsulting.com/Blogs/GregGalloway

Firefox won't open when prompted the first time. Says "Not Responding". I have to hit cntrl/alt/del then try starting again. Sometimes multiple times.

Firefox won't open when prompted the first time. Says "Not Responding". I have to hit cntrl/alt/del then try starting again. Sometimes multiple times.

Sounds like a "hang at exit" problem. There are several possible causes for that error. See:
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
* What may cause Firefox to hang at exit
** http://support.mozilla.com/en-US/kb/Firefox+hangs (see "Hang at exit" section)
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem: http://support.mozilla.com/en-US/kb/Safe+Mode
**Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
** See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting

Error when booting app server for first time

Hi All,
My OS is OEL 6,PT 8.53 and HCM9.2 after creating the app server domain and booting it for first time i am getting an error as below,
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 221921 -D TESTSERV - S PSWATCHSRV :
CMDTUX_CAT:816: ERROR: Cannot exec, executable file not found
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha ndler
exec tmshutdown -qy
Any help appreciated.
TUXEDO LOG Says,
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: client high water (0), total client (0)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162258.wipcoe1234!PSADMIN.5355: Begin attempt on domain HCMDM92
162302.wipcoe1234!tmadmin.5392.1509406464.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
162304.wipcoe1234!tmboot.5393.2297452288.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162306.wipcoe1234!BBL.5394.2180380416.0: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit, Patch Level (none)
162306.wipcoe1234!BBL.5394.2180380416.0: LIBTUX_CAT:262: INFO: Standard main starting
162308.wipcoe1234!tmboot.5397.3909768960.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162308.wipcoe1234!tmboot.5397.3909768960.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
162311.wipcoe1234!BBL.5394.2180380416.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
162314.wipcoe1234!PSADMIN.5355: End boot attempt on domain HCMDM92
Edited by: ajith on May 3, 2013 5:39 PM

If not solved yet...
What says appsrv.log ? Which user are you using to start the appserver ? Which user have you specified when sreating the database ?
Nicolas.

I get the message "Install Adobe Flash" can't be opened because it was not downloaded from the Mac App Store. This is the first time I have gotten the message. What do I need to do?

I get the message "Install Adobe Flash" can't be opened because it was not downloaded from the Mac App Store. This is the first time I have gotten the message. What do I need to do?

Hi Sandra,
you'll need to edit the security settings to install programs 'Mac App Store and identified developers'
Open the Systems Preference and go to Security & Privacy. There will be a section in the 'General' tab for 'Allow apps downloaded from:" The default selection is 'Mac App Store'. Change this setting to 'Mac App Store and identified developers".
This screenshot is taken on OS X 10.10 (Yosemite), so it may look slightly different if you're on a different OS X version.
Maria

I have just bought iphone 5 and i have a problem in charging it , firstly it took a long time to charge when i opened it to the first time , and its nearly dont charge on 110 output, and its taking a long time to charge on 220 reaches 50% in 1 hour

I have just bought iphone 5 and i have a problem in charging it , firstly it took a long time to charge when i opened it to the first time , and its nearly dont charge on 110 output, and its taking a long time to charge on 220 reaches 50% in 1 hour is this normal?

The charger block is universal and is able to handle multiple votages. One hour to reach 50% seems fine to me if the phone was completely flat to start with. Just leave it on charge for as long as it takes to reach 100%. I leave mine connected overnight all the time and it does not harm the battery

Opening premier elements for first time. Been "gathering user info" for 15 minutes...what to do?

Similar Messages

Maybe you are looking for