Opening project in other computers?

Hi,
I have a project in FC 6 and I want to open it in another computer, I have material from 1 whole tape, I captured non stop and don't need to use the whole material, my question:
Is there a way to save the project that it contains only the material needed "used", without having to take the whole folder/hard drive where I reset the scratch and save the whole project?

Yes, consolidate and trim your used media using the Media Manager
Its a big topic so head up to your Help menu and crack open the manual and read the chapter on Media Manager ... also check out some of the Media Manager tutorials over on Ken Stone's marvelous website, and also at the LAFCPUG website. Heres a few to get you going:
http://www.kenstone.net/fcphomepage/FCP_4_trim_dangit.html
http://www.kenstone.net/fcphomepage/basic_onliningjordan.html
http://www.lafcpug.org/tutorials/basicmediamanagement.html
Once you have a handle on it, head on back with your questions
Good luck
Andy

Similar Messages

  • How do i save my document on pages so that i can open it on other computers

    How do I sav emy document on pages so that i can open it on other computers?

    Well, that was the short answer, then I rethought your question.
    Will the “other computers,” be Mac, or a mixture of Mac, Windows PC, and possibly Linux?
    What application on the other computers will be accessing the Pages content created on your MacBook Pro?
    Using the File export options I originally mentioned, you could save the files to iCloud. Then on the other computer, you use the web browser to sign into your iCloud account. When you click the iWork icon, the files that you saved from your MBP will be there. You can then right-click on the file you want and a download option exists.

  • I have the exact problem, only have 6 computers with indesign CC version 10.1.0.70, but 2 computers, is version 9, i try actualization no CC, but no success. i can´t use open file, em others computers, because problem version, i liked if all indesign had

    i have the exact problem, only have 6 computers with indesign CC version 10.1.0.70, but 2 computers, is version 9, i try actualization no CC, but no success. i can´t use open file, em others computers, because problem version, i liked if all indesign had the same version.

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • Open tabs on other computers

    Dear sirs c.q. ladies,
    After setting up Sync on several computers, all using Firefox 4.01, I get a welcome screen stating;
    "Your open tabs are available under the History menu. You can also open them via the 'Tabs from Other Computers' option in the Tab List menu on your tab bar."
    However, I cannot find the "Tab List menu" on my tab bar. I would be grateful if you could direct me to it.
    Thanks, Jos

    Hi Joshout!
    The option you are looking for shows up when you click on the small arrow that you can find in the right top corner of your browser.
    I'm including an screenshot that should help you.

  • Is there a keyboard shortcut for the open tabs on other computers?

    I know that you can click the arrow on the right of the tab bar to access the tabs from other computers, but is there a keyboard shortcut for it, or another way to access it?

    And then, you can switch groups by CTRL+` (grave accent, since my kb is portuguese, I have to do CTRL+ SHIFT + ´) or CTRL+~ (tilde)

  • "damaged file" message comes on when I try to open my premiere project on other computers.

    I have a mac and I've done all the updates on Creative Cloud for Premiere Pro. I have no problems when working on my own computer. But when I save my project and try to open it on another computer a message comes on saying that my "project file is damaged" and won't open. Please help. I need to give thie project to another editor for finishing asap!

    Moved from the Creative Cloud to the Premiere Pro forum. They will be able to help you here.

  • Logo image in titles disappear when open project on other PC

    Hi You all!
    Got a problem with Premiere Pro CS5 regarding titles. We´re a group of people who uses the same CS5-project file as a template (write protected) from a server out on different computers.
    For each new project we open the template-project from the server and do a "save as" before we start editing on our own PC.
    The problem occurs with our titles in this template-project. We have a pretty straightforward title with a background and text created in the title editor. Then we also  import a logo in png-format in the title editor. This works great when we open the project on the same computer as its made on. But when someone opens the project on another computer from the server the image is gone and there's a "Logo" text where the logoimage was. To get the image back we ned to open the title in the editor, klick on the "logo" and the smal square in the tools to the right and browse the image file.
    This is hard unecessary work to do when we do changes etc in the template project.
    Hope there is some way to get the logo image to stay in the title when the project is used on other PC:s.
    Hope I have managed to explain the issue ok. Thanks for any help with this.

    You explained it well enough.
    But in my experience, you will have to redo the logo every time you switch computers.  I don't know why PP keeps losing that link, but it does.
    The better option would be to create the title in Photoshop, including the logo, and bring that into the template project instead of using a PP title.

  • Problem opening projects on other systems

    I have a Mac Pro at work and an iMac at home...
    When I open a project from either box onto the other one, my timelines instances are not visually there on the timeline but if you scroll through it the footage is still there, it's almost like a blank sequence.
    The timeline/sequence turns black and then sometimes an instance will appear randomly, it is really annoying. Only the timeline panel has the issue, all other panels seem fine.
    My only fix is to start a new project and then drag in the project from the other system. I have to do this every time I go from one system to another.
    Anyone having the same issues???
    Cheers

    Sorry but ... from the PP manual... if you have ever read it???
    Clip instance
    A dependent reference to a source clip, used in a sequence. Each time you add a clip to a sequence, you create another instance of the clip. A clip instance uses the name and source file reference used by its source clip. While clip instances are not listed in the Project panel, they are differentiated in the Source Monitor menu if you open instances there. The Source Monitor menu lists instances by name, sequence name, and In point.
    Hope that helps you understand the correct terminology.
    Anyway, I was wondering if anyone can try to duplicate my issue??

  • Opening Project in 2 computers

    I have an HDV project with about 50 hours worth of footage on an external SATA drive.  Sometimes I edit using premiere CS4 on my desktop and sometimes on my laptop. What changes do I need to make so that when I open the project it doesn't need to be reindexed and reconformed etc. everytime I open it on either computer?

    Do this on both your desktop and your notebook:
    Right click on 'My Computer', select 'Manage', select 'Disk Management' and then select the eSATA disk (like this Freecom in the picture below). Then in the lower pane right click on the disk and select properties and select 'Change drive letter', like shown below:
    When you have done this on both machines, you should be OK. Your other settings seem right too.

  • Anyone get this when opening projects on other systems

    Have a project running on my mac pro (system A)... put everything on an external drive... open it on another identical system (system B), and get this:
    Premiere CC 2014 Timeline Issue - YouTube
    It does not matter which way I go... (A to B or B to A) every time I bring the project to another system I always get this issue.
    The only time it opens ok is when the project relinks media from the system the project was saved on.
    The best workaround is to start a new project and drag the project I want to open into it.
    Cheers

    Sorry but ... from the PP manual... if you have ever read it???
    Clip instance
    A dependent reference to a source clip, used in a sequence. Each time you add a clip to a sequence, you create another instance of the clip. A clip instance uses the name and source file reference used by its source clip. While clip instances are not listed in the Project panel, they are differentiated in the Source Monitor menu if you open instances there. The Source Monitor menu lists instances by name, sequence name, and In point.
    Hope that helps you understand the correct terminology.
    Anyway, I was wondering if anyone can try to duplicate my issue??

  • I cannot find how to open tabs from other computers.

    Both of the computers have been set to sync tabs, and they seem to sync bookmarks and history fine. I am using Beta 4 Version 7.

    Never mind, despite the program saying that it is in the History submenu, it is in the Tabs menu. Also, it can be gotten to using "about:sync-tabs". (Minus quotes.)

  • I have a used Mac OSX 10.4.11 in good condition, but I have several concerns. The internet is slow, and doesn't support Google Chrome.  Also, when I create excel and word documents, people aren't able to open them on other computers.

    Is there a way to upgrade my Mac software without paying a fortune? My main concern is Word and Excel - I need people to be able to open these files as attachments for work purposes.  Thanks!

    The Snow Leopard 10.6 DVD should still be available at this time from Apple for $19.99. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 Lion is part of the 10.6.6 update.
    If you wait to long and they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already over $100 on Amazon.
    http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0
    You can upgrade from 10.4 straight to 10.6 with no problems. Any program that runs under 10.4 should run under10.6. See this list for compatibility with 10.6: http://snowleopard.wikidot.com/  You might have to upgrade some drivers for printers, etc....
    And you will have to install Rosetta if you have any Power PC applications http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/   I recently upgraded an older MacBook (model 1,1) straight from 10.4 to 10.6.

  • Firefox won't open a specific website and neither with IE, but it opens fine on other computers

    I have been trying to open a specific website: arabicpod101.com since yesterday, and I keep being given the Problem loading page error and am told that the connection was reset. I can't seem to open it on Internet Explorer either, but had no troubles accessing the website from a friend's computer.

    Reload a web page and bypass the cache with:
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    See [[Keyboard shortcuts]] and [[Mouse shortcuts]]

  • Can't open very large JPEGs from PSE 13 on other computers

    I've produced JPEGs in the 40-300 MB range in PSE 13 (Windows 8.1).  However, I can't open them on other computers operating with Windows Vista or Windows 7.  I get an error message to the effect that "Windows Photo Gallery can't open - file format not supported, or you don't have the latest updates to Photo Gallery".  I do have the latest updates, so that's not the issue.  The photos will open through PSE 11 on one of the other computers, but that won't help if I give the photos to someone who doesn't have PSE on their computer.  Any ideas? 

    Does this help?
    Unable to open very high resolution file in Windows Photo Gallery

  • Going back and forth with open projects

    Using Motion 4, is there a quick way to toggle quickly between open projects?
    (aside from going to window menu, and switching there)

    Kinda works? I use Command-~ all the time, does it not work for you? The only thing you need to be aware of is that it also changes focus between the Utility pane and the Canvas of the current project (which is itself quite handy) so you have to press it two times to get to another open project.

Maybe you are looking for