Opening projects created in older versions

IF I install Adobe Photoshop Elements 11 & Adobe Premier Elements 11, will I be able to open and edit projects I created in Elements 6?

Hi Karen, Yes you should be able to open most of the projects.
Here is the list of supported file formats with PSE 11 : http://helpx.adobe.com/photoshop-elements/kb/supported-file-formats-photoshop-elements.htm l

Similar Messages

  • Problems using projects created in older versions of iMovie

    I have a few projects created in older versions of iMovie, as far back as version 2 as well as more recent versions. Most of those projects are finished and I want to burn them to DVD again, but a couple of them could bear a little touch up editing. These projects are precious movies of our kids and hard to replace. Although I could probably find the original video, I put many hours of work into creating these projects.
    In any case, when I open up an old project, I get a warning that goes something like this: "The project was saved with an older version of iMovie. Opening it in this version will cause it to be upgraded, which will make it unreadable by older versions. Are you sure you want to open it?"
    I clicked okay, thinking "sure, I don't need to play it in an older version. I have iMovie HD."
    However, now when I play my old iMovie project, there are a few problems. For example, one original movie's title was over black. When I play the movie, I get a completely white screen and no title. Also, in another movie, when viewing the movie in full screen, the transitions were replaced by a black screen (although the transitions were there when I viewed the movie in the iMovie window). Basically, there are problems cropping up here and there.
    I need to do some more experimenting with all this to more fully understand how many problems there are. I don't know if the projects I opened in iMovie HD are now "broken" since I "upgraded" them with iMovie HD (when prompted to save the project's changes when quitting, I said NO, don't save changes).
    I don't know if I should use older versions of iMovie to view and burn to DVD these projects. (I still have iMovie 2 and 3, but not 4 or 5. I don't know if older versions would even work on my Quad G5 with OS 10.4.7.) I also don't know if the older versions of iMovie would work with the current version of iDVD. How can I tell which version of iMovie was originally used for a given project? How can I find iMovie 4 or 5 if I need it?
    I also wonder if projects I make with iMovie HD can be opened by future versions of iMovie, or if I should export them as Quicktime or something to be safe.
    As I start to look into this further, I would appreciate any comments, suggestions, and experiences that you may be able to offer. I need to get these movies back to their former selves, when they looked good!
    Message was edited by: Anthony M Kassir MD

    (when prompted to save the project's changes when
    quitting, I said NO, don't save changes).
    Excellent! That should leave you in pretty good shape. More below.
    I don't know if I should use older versions of iMovie
    to view and burn to DVD these projects. (I still have
    iMovie 2 and 3, but not 4 or 5. I don't know if older
    versions would even work on my Quad G5 with OS
    10.4.7.)
    The old versions of iMovie will run just fine in today's OSX. (But not iMovie 2 if it was the version that ran in Classic instead of Mac OSX.)
    I run versions 2,3,4,5 and 6 today. Problems are minimal.
    I also don't know if the older versions of
    iMovie would work with the current version of iDVD.
    That's not a problem unless your old iMovie projects contain chapters. If you tell iMovie 3 to create a new iDVD project, it might not work. You might not be able to transfer the chapter information to the newer version of iDVD.
    (I just tested iMovie 3 to iDVD 6 and everything worked just fine.)
    Except for iMovie 2, all old versions of iMovie stored a small QuickTime reference movie in the project folder. If you can't get an old version of iMovie to play nice with iDVD, drag that movie into the iDVD window.
    How can I tell which version of iMovie was originally
    used for a given project?
    Drop the project file (discussed below) onto the TextEdit icon in the Dock. The version of iMovie that last saved the project is shown in the first few lines of the project file.
    iMovie 5 used an entirely different project file format, the pList format. The top of the project file will look like this in TextEdit:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    How can I find iMovie 4 or
    5 if I need it?
    eBay?
    I also wonder if projects I make with iMovie HD can
    be opened by future versions of iMovie, or if I
    should export them as Quicktime or something to be
    safe.
    We can never assume any new version of iMovie will be able to understand all features of a older project. It's always smart to make a backup.
    There can be problems Apple can't anticipate. There may be third-party software used to create titles, transitions and special effects, plug-ins not installed with the new version or (more often, incompatible). The fonts installed on our Mac may have changed too. There's lots of features that can't be anticipated. I've never had a problem converting projects, but I never use third-party add-ons and special fonts.
    As I start to look into this further, I would
    appreciate any comments, suggestions, and experiences
    that you may be able to offer. I need to get these
    movies back to their former selves, when they looked
    good!
    My guess is it should be possible to restore the projects back to their original state.
    Note that when imovie 5/6 converts an older project, it does NOT create a true iMovie HD project. Instead of creating an iMovie package, it retains the project FOLDER format. It places new iMovie HD elements inside the old project folder instead of converting it to a package.
    When converting the project it changes the old project file name to "Sample Project Name.iMovie2Project", then creates a NEW project file with the plist format, having the name "Sample Project Name.iMovieProj". (There may NOT be the .iMovieProj extension.) When you save the new project, it adds a new project file "Sample Project Name.~iMovieProj". Note the tilde. The tilde file is a backup of the project file as it was when last saved in iMovie HD.
    For our purposes, ignore the iMovie HD project files. We'll use the file ".iMovie2Project" to restore the project. (The extension is the same for all old versions of iMovie, not just iMovie 2.)
    • In the Finder, Duplicate the entire project folder. Work on the copy.
    • Open the project folder in the Finder.
    • Discard the "Cache" folder, the "Shared Movies" folder, the "Audio Waveforms" folder and the two iMovie HD project files. (Some of those items may not yet exist yet because you didn't save the converted project.)
    • Drop the "Sample Project Name.iMovie2Project" file onto the TextEdit icon in the Dock to get the version. Close it.
    • Remove the ".iMovie2Project" extension, if you want.
    • Launch that version of iMovie. Drop the "Sample Project Name.iMovie2Project" file icon on the iMovie icon in the Dock. With luck, the project should open normally. It's possible any third-party plug-ins used to create the project may not be available. If they aren't available, there might still be problems.
    • Move your unconverted projects to folders that say which version of iMovie created them. To open them in the future, drop the project icon on the appropriate version of iMovie.
    If all this fails, there is another way to do the editing you want. That is to import the project.mov file that's inside the converted project folder to a new iMovie HD project. That will deliver the video and audio of the original project as a single clip. Use that to re-edit the project. The name of the movie is "Sample Project Name.mov".
    (The movie is a QuickTime reference movie, with no video and audio of its own, just pointers to the files in the Media folder. So long as the Media folder hasn't changed, it can play the original project as last saved.)
    Importing the project.mov won't work with iMovie 2 projects, however, for iMovie 2 didn't store a project.mov file in the project folder.
    Even if you end up importing the project.mov, you still may want to "unconvert" the project as described above.
    Hope I haven't skipped a step. Let me know if you bump your head on something.
    Karl

  • I have been able to open pdfs created in older versions of adobe, but not the newest version. Is anyone having issues opening PDFs sent via email created in version 9?

    I have been able to open pdfs created in older versions of adobe, but not the newest version. Is anyone having issues opening PDFs sent via email created in version 9? If so, what was your solution? I have PDF reader app as well.

    Can you open the files in Preview?

  • I can't open 3 documents because trial upgrade to version 5 of pages happened. I don't want to pay $20 to get upgrade. How do I open docs in older version. They were created in older version.

    I can't open 3 documents because trial upgrade to version 5 of pages happened. I don't want to pay $20 to get upgrade. I don't recall fine print stating money would be needed. How do I open docs in older version? They were created in older version.

    Hi MBilyeu,
    Thanks for visiting Apple Support Communities.
    You can use these steps to open your Pages documents with the previous version:
    Permanently change the document’s app
    Select the document and choose File > Get Info.
    In the Info window, click the triangle next to “Open with” to expand the section.
    Choose an app from the pop-up menu, or choose Other to locate a different app.
    If you want to use that app to open all documents of the same type as the current document and created by the same app, click Change All.
    Temporarily change the document’s app
    You can open a document in a different app without changing the app that normally opens it. Use either of these methods:
    Control-click the document, choose Open With, and then choose the app you want to use.
    Drag the document to the app’s icon in the Dock or in the Finder.
    From:
    OS X Mountain Lion: Choose an app to open a document
    http://support.apple.com/kb/PH11329
    Regards,
    Jeremy

  • How do I open projects created using Premier Elements 8 with Premier Elements 13

    how do I open projects created using Premier Elements 8 with Premier Elements 13

    ATR
    The DVD Creator.dll file was in the proper location but I could not find a Run As Administrator Option.
    I did delete Prefs file and try again to open the app then the project and received the same problem.  And the scratch disks were all directed to the Elements 13 path
    Yesterday I did try additional solutions
    Removed the Elements 13 App vis the Control Panel, copy the original downloaded .zip File to the Desktop and reload the entire application with no success solving the problem
    In addition to that I contacted a site called Rescue.com? and the guy told me that he was a representative of Adobe, which I was not sure was the truth.  He looked at my system and told me that Premier 13 was not compatible with Windows 7.  I called BS on him told him that Adobe site said it was compatible and he told me I had a Trojan on my system and he would refund my money for Elements 13 and sell me version 12, which would be compatible, along with a better security system than the Norton 360 I told him I had.  At that point I immediately terminated our communications and called Norton to have additional checks performed to ensure no additions were added to my system.  They had me download and run Power Eraser from them and it found nothing wrong. 
    I also temporarily turned off the firewall and tried to use the Elements 13 but had no success.
    I also went to Microsoft Windows site and searched for the Exception code: 0xc0000005 that was displayed in the event viewer and they indicated there was a hotfix available and they would email me that fix.  ave not received the email yet.
    I’m getting very frustrated but thank you for your help.  I will update you with and additional results or actions I get or perform.
    GDBMB

  • How to open project from an earlier version (RH x3) using RoboHelp 6.

    Hello everyone, I need your help. I have recently upgraded
    from RH x3 to RH V6. I have just completed the installation of RH6
    after spending long time with Adobe customer support as it took
    them long time to figure out how to provide me the unlocking key to
    install RH v6.
    BTW I have only installed RoboHelp 6 by itself. I did not
    install their Source Control because we already have Visual Source
    Safe which we have been using in our company.
    Also, since I had Adobe Reader 8 installed on my PC, I did
    not install Acrobat Element 7 either. As I suppose if Acrobat 7 or
    higher is installed RH v6 was not going to install Acrobat Element
    7.
    Well, now after I have installed RH v6, my first step is to
    find out how to open project from an earlier version (RH x3) using
    RoboHelp 6.
    RH x3 is installed on my old PC and I am working on my new PC
    where I have installed RH V6.
    Sorry, for providing you too many details, the purpose is
    only to give you a clear picture.
    Please, give me your feedback if I am doing everything
    correct and how should I open the project from an earlier version.
    Thanks

    Hi Peter,
    Thank you so much for the response. Actually, after I posted
    the question on Forum we had lost internet connection for some time
    and I just went ahead and tried it by myself.
    This is what I did – since we use MS Visual Source
    Safe, my all files were in the working folder of VSS in my c drive.
    I just clicked the Open tab/More Files in RoboHelp Starter and
    located the RoboHelp HTML Project File. It opened without any
    problem. Everything looks alright.
    Is there anything specific I should be checking to make sure
    if it is working fine in this version of RH. Because I did not
    create this project, somebody else did and I have never used this
    tool before this is the first time I will be using.
    I found your site pretty helpful though and it did have some
    information about Source Safe. I still have one question related to
    Visual Source Safe that Is RoboHelp v6 linked to VSS automatically
    and check the files out from it automatically whenever a project is
    opened or we have to manually set the link between the RH6 &
    VSS.
    In RH x3 whenever I would open a project it would prompt a
    message that in order to open this project the following files need
    to be writable, would you like to make them writable, selecting
    that option would checkout all the files from the VSS to make them
    writable. However, in RH V6 I opened an existing project and it
    opened without checking out the project files from VSS. Do you have
    any idea what’s happening?
    Ps: Do you recommend any book on RH 6 for starters or any
    other recommendation?
    Your help is always appreciated

  • Why will iphoto not open, library corrupted using older version?

    iMac OSX Version 10.6.8 iMac12,2
    Intel Core i5 iPhoto 8.1.2,
    iphoto will not open, library corrupted using older version
    I have removed all iphoto files and avatars as one person has suggested. I am suppose to reinstall iPhoto using the discs that came with the computer.
    I am not sure what to do with any options that might be provided. Any help will be appreciated.

    Be sure the DNG Converter's compatibility is set to provide support for your version of ACR:
    Benjamin

  • Logic will not open files created with earlier versions?

    Logic Pro 9 will not open willnot open files created in earlier versions advising that attempts should be mad using Logic pro 7.  My Mac Pro wil not open this version of Logic "because PowerPC applkcations are no longer supported."  Any help would be very much appreciated since I need to have books reprinted.
    Thanks

    Pancenter wrote:
    Won't help, the "installer" (through Logic 8) uses some PPC code, this person is running Lion which means no version of 7 or 8 can be installed.
    Hi
    I think that the PPC installer can be worked around (?):
    Make disk images of the Install Disks, mount them all, then use Pacifist to run the Install process
    Looks like it should work here..
    CCT

  • Encore Projects built on older version does not open in new Encore

    I have built many projects on older version of Encore 1.5.
    They will not open in CS5 version of Encore.
    What is a poor guy supposed to do? How can I open these Encore files and make another copy? Any suggestions welcome! Thanks.

    Also, are you on the same platform with CS5, that you were on with 1.5, or did you perhaps switch to a Mac?
    Good luck,
    Hunt

  • How to open a VI in older version 6 while is being created by 8.6

    Hello,
     I have some VIs that are being created by version 6.1 and latter when I have version 8.6 I opened these VIs with this version, now when I wanted to open these VIs in other machine which has version 6.1 I couldn't open them.
    please any help
    thanks
    Aneece

    Do you have LV versions 6.1 and 8.6 on the same PC?  Are you trying to open the same VI simultaneously in both versions?  Or did you open up an old VI in 8.6 then happen to save the file?
    If you open up and old VI, it will recompile into the newer version.  If you are trying to simultaneously open it in LV 6.1, you would probably have either file sharing conflicts, or conflicts of trying to have a VI of the same name in memory at the same time.
    If you happened to save the file after you opened it up in 8.6, you won't be able to open it in LV 6.1 because the file version is too new.  You will either have to find a backup version of that VI somewhere (hopefully you did make copies of your VI's for safekeeping?) or you will have resave it back to 6.1 which would be a multiple step process 8.6 to 8.0 to 7.1 to 7.0 to 6.1. 

  • I downloaded the latest version of Pages 5.0 and have been using it for days.  Now, when I try to open documents created with this version, I'm advised that I need latest version of Pages to open.  What's going on?

    First time user.  Need help.  I downloaded latest version of Pages 5.0 and have been using it.  Now, when I try to open documents created by it, I'm advised that I have to downoad Pages 5.0.  What's going on?

    You have 2 versions of Pages on your Mac.
    Pages 5.2.2 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Older versions of Pages 5 can not open files from later versions of Pages 5.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has removed over 110 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    You can add the icon of the missing Pages on your Dock or open Pages from the Apple menu > Recent Items list.
    Or you can archive Pages 5 so that it doesn't automatically open.
    If you are unhappy about this review/rate Pages 5 in the App Store.
    Peter

  • Save project created with trial version in Captivate 5.5 with license

    I have a project created with Captivate6 trial version. Now I have a license for Adobe Captivate5.5. The content of my project with Captivate6 will expire when the trial period is over and will not be accessible. I cannot open the .cptx file with Captivate5.5. How can I save my work from the trial Captivate6 to the licensed Captivate5.5? This is the last day of my trail version. Please help as soon as possible.

    Hello and welcome to the forum,
    I'm so sorry, but there is no backwards compatility beteen 5.5 and 6. You cannot copy slides, objects from 6 to  5.5. You can try to export what is available in the Library, some objects you will hopefully be able to reuse in 5.5. But the project will have to be recreated from scratch.
    Lilybiri

  • How do I open movies made with older versions of iMovie?

    I have newer iMac with iMovie 10.0.02 and would like to open movies created with an older version of iMovie.  I was informed by the people at the Apple Store this could be done.  Does anyone know how?  In the end I would like to create high def copies that can be viewed on a Mac laptop.

    Hi
    I was informed by the people at the Apple Store this could be done.
    That depends up-on from what old iMovie version.
    - iMovie 1 to HD6 - is one program and it's evolution - Will Not be possibly to open with any other program.
    - iMovie'08 v.7 to iMovie'13 v.10.0.x - is a compleatly other product (wrongly named as iMovie in my opinion) - can open older files from this evolution. (Not from iM 1 - 6)
    So it depends greatly from what version that You mean.
    Please tell.
    Yours Bengt W

  • Cant open projects created in Beta1

    hi, ive just installed the 2nd beta FC.
    installation was completed successfully. however i cannot open any of my previous saved FC projects (.fxp)
    it just comes up with an error message saying: 'Flash Catalyst cannot open this project because it was created by an incompatible version of Flash Catalyst'.
    so does this mean that all projects created in the 1st beta are rendered useless?
    what should i do
    cheers
    mudd

    Sorry, but in order to support new features and functionality, we have had to make changes to the Flash Catalyst project files that are not backwards compatible. The new beta cannot open files created with earlier prerelease versions.
    I don't know how much use this will be to you: You can use an unzip utility to uncompress your .fxp file and then use a text editor to inspect many of the files within the project. From there, you can try to copy and paste some of your code into (for example) a Flash Builder project and salvage some of the old project.
    -Adam

  • Premiere Pro CC 2014 seems to  Corrupt projects created with earlier versions

    I have opened  in PPro CC 2014  projects created in PPro CS6  or PPro CC. Every time  PPro crashed and got the message " PPro Debug Event - PPro encountered a major problem and has stopped working" After that the project seemed corrupted and could not be opened even in earlier versions.
    I get the following message
    Première Pro Debug Event (Title of the window)
    Premiere Pro has encountered an error
    [c:\caravan\releases 2014.09\shared\adobe\mediacore\mediafoundation\api\incK... (can't read the res...)
    Then there is a "continue" button if I hit this button I get the following window
    Following a serious error PPro must shut down. The program will try to record your current project.
    Has anyone encountered this problem?
    I don't dare open any old project. help!

    Hi there!
    I´ve updated to latest version and then opened my project and got this error.
    Then I found in a forum that I should delete the ADOBE folder in \my documents
    I´ve deleted and then I could open the file again.
    But the .MP4 and some other video files doesn´t open.
    I saw that the 'Effect Presets and Custom Items.prfpset' file on \my documents\adobe\premiere Pro\8.0\Profile-myprofilename was causing the error.
    I also saw in other forum that I should rename Adobe folder to old.adobe from \userfolder\appdata\roaming and \userfolder\appdata\local but this hasn´t solved the problem.
    I tried also to reinstall Quicktime and K-Lite Codec Pack but the problem persists.
    Have you found any solution??
    Regards
    Lucas

Maybe you are looking for