Opening PSD with layers in photoshop touch

is it possible to open a PSD document with many layers in photoshop touch?

Sorry, no. (It was probably done as a mechanism to prevent crashing. PS Touch supports up to 12 layers vs. the hundreds (theoretically thousands) available in desktop Photoshop.)
You can, of course, do the reverse; open a PS Touch project exported as PSD or PSDX in Photoshop with layers intact.

Similar Messages

Can I open psd files created in Photoshop CC with lower version? Actually CS5.

Can I open psd files created in Photoshop CC with lower version? Actually CS5.
My home and office have different version each.

Yes, PROVIDED that the file has not been saved with any layers containing any of the specific new features introduced starting with Photoshop CC and higher.
If the file has been flattened or if it was flat to begin with there will be no problems.

Can I open psd file made in photoshop cs3 with photoshop ps2?

Can I open psd file made in photoshop cs3 with photoshop ps2? Thanks in advance!

Actually you can open a CS3 file with smart filters in CS2
the only problem is CS2 will not understand the Smart filter and flatten it.
If you leave the smart filtered object alone in CS2 save the file and it should still be a smart filtered object in CS3

Option missing to open images as layers in Photoshop.

The option to edit in Photoshop CS4 from Lightroom 4 and return is just fine. However, the option to Open images as layers in Photoshop is grayed out as well as the option to open as Smart Object or Merge.

These other options work differently than the simple "Edit in..".
The method that does work for you, with CS4, is using Photoshop as a standard external editor by means of a "dumb" interaction. LR does all the work of converting the image into a bitmp and then saving it as a TIFF or PSD. It knows just enough about the other program, to tell the operating system to start the program executable and to pass it the file that has already been created. Then it keeps an eye on the file, watching for modifications saved to it by the other application.
The only compatibility needed between the two programs is: that PS (or whatever) can understand a TIFF or a PSD made by LR; and in return, that PS (or whatever) can save a modified file which LR can display.
The extended options you mention, rely on LR getting PS to get ACR to do all the work of conversion, and then in due course, for PS to take care of file creation too, and furthermore, to tell LR which file has been created where. This is partly because several conversions are involved rather than one; conversions made directly into Photoshop's memory space but not yet onto disk; which is ACR territory.
In order for this more complex interaction to happen, LR needs to be talking to a fully-compatible PS and ACR partnership - which it knows will properly read all its adjustments, and include them in the bitmap information. At present, from LR4, that means either Photoshop CS6 with ACR 7.x - or else (as a special concession), Photoshop CS5 with ACR 6.7. Unless one of those two setups is detected, these forms of interaction are greyed out. Sorry

Opening files with Illustrator and photoshop doesn't work, i have to drag the files from finder in to the program. This problem appears after opening 4 a 5 files.

Opening files with Illustrator and photoshop doesn't work, i have to drag the files from finder in to the program.
This problem appears after opening 4 a 5 files, rebooting helps another 4 a 5 times and appears again.

I'd recommend reposting in the Boot Camp forum, that is where the Boot Camp and Windows gurus hang out.
Good luck.

Open psd with touch

i have photoshop toch, but i can't open a psd with it (my psd is in creative cloud) So how can i open a psd with my tablet? Thanks

Please choose New from > Creative Cloud.
Be aware that the layers will be flattened.
Thanks!

Working with layers | Learn Photoshop Elements 11 | Adobe TV

In this movie, author Jan Kabili discusses using layers in the Editor workspace in Photoshop Elements 11. Jan explains what layers are, why you might choose to use them, and how to create and work with layers in the Layers panel.
http://adobe.ly/SBQu3E

I have downloaded & installed flash player at least 4 four but your programs do not find it. What do I need to do?

Working with Layers | Learn Photoshop Elements 9 | Adobe TV

With layers, you can work nondestructively and save all of your creative ideas in a single file. Learn about the various options in the Layers panel and how to harness the true power of Photoshop Elements by working with layers.
http://adobe.ly/ynakt0

What is the best way to work on photographs, editing them, and preparing for print if I can't save layers as .jpg or non-layered .tiffs? The photo lab I will be using does not allow layered .tiff. I have seen many videos that show how to let's say enhance eyes using layers, but in this video it says that .jpg cannot be used. I am new to photography and PSE an would like to know if there is an alternative way to edit an image that can be saved as .jpg. Thank you!

How to save a PNG with layers in Photoshop.

i am tryin to save a PNG with layers. Is it poosible ?
What i found on the net is ....PNG is not meant for multiple layers. But still want to know if photoshop have its own proprietory standard for PNG.
Thanks in advance.

No, it is not possible.
PNG doesn't support layers.
A few apps stuff their own private data into PNG to hide layer data, but well, it's private undocumented data.

Writing PSD with layers

I'm trying to generate a Photoshop file with Adjustment Layers. Does anyone have any pointers, or know of any methods of diagnosing problems in the file?
I've been able to make a file with multiple image layers which opens correctly in Photoshop. But when I try to make an adjustment layer, Photoshop won't open it, giving me the error: "Could not complete your request because the file is not compatible with this version of Photoshop." I've tried adding various Image Resources and other bits, to no avail.
The few third party PSD parsers I've used don't seem to find any problem with the files I generate. For example, "psdparse" gives a very verbose breakdown of the file, and finds no errors.
Here's a link to a sample file: http://bensyverson.com/share/photoshop/test.psd (warning: 15MB link)
And here's the psdparse output:
Processing "../../Adobe/test.psd"
PSD (version 1), 3 channels, 1936 rows x 2592 cols, 8 bit RGBColor
(color mode data is empty)
Image resources (506 bytes):
resource '8BIM' ( 1028,""):   15 bytes [IPTC-NAA record (File Info)]
resource '8BIM' ( 1005,""):   16 bytes [ResolutionInfo]
    Resolution 72 x 72 pixels per inch
resource '8BIM' ( 1026,""):    4 bytes [Layers group info]
resource '8BIM' ( 1011,""):    8 bytes [Print flags]
resource '8BIM' ( 1034,""):    1 bytes [Copyright flag]
resource '8BIM' (10000,""):   10 bytes [Print flags info]
resource '8BIM' ( 1013,""):   72 bytes [Color halftoning info]
resource '8BIM' ( 1016,""): 112 bytes [Color transfer functions]
resource '8BIM' ( 1024,""):    2 bytes [Layer state info]
resource '8BIM' ( 1032,""):   16 bytes [Grid and guides info]
resource '8BIM' ( 1057,""):   45 bytes [Version Info]
resource '8BIM' ( 1044,""):    4 bytes [Document specific IDs]
resource '8BIM' ( 1069,""):    6 bytes [Layer Selection ID(s)]
resource '8BIM' ( 1010,""):   10 bytes [Background color]
resource '8BIM' ( 1041,""):    1 bytes [ICC Untagged Profile]
2 layers:
layer 0: (   0,   0,1936,2592), 3 channels (1936 rows x 2592 cols)
    channel 0: 5018114 bytes, id= 0 (R)
    channel 1: 5018114 bytes, id= 1 (G)
    channel 2: 5018114 bytes, id= 2 (B)
(extra data: 256 bytes @ 602)
(no layer mask)
...skipped layer blending ranges (40 bytes)
    name: "Background"
layer 1: (   0,   0,   0,   0), 5 channels (   0 rows x    0 cols)
    channel 0:       2 bytes, id=-1 (transparency mask)
    channel 1:       2 bytes, id= 0 (R)
    channel 2:       2 bytes, id= 1 (G)
    channel 3:       2 bytes, id= 2 (B)
    channel 4:       2 bytes, id=-2 (layer mask)
(extra data: 324 bytes @ 922)
(has layer mask)
...skipped layer blending ranges (40 bytes)
    name: "Curve"
## layer data begins @ 1246
## layer image data begins @ 1246
layer 0 ("Background"):
blending mode: sig='8BIM' key='norm'(normal) opacity=255(100%) clipping=0(base)
    flags=0x9(transp_prot(1) visible(0) bit4valid(1) pixel_data_irrelevant(0))
Layer 0 additional data:
    data block: sig='8BIM' key='luni' length=     24
    (Unicode name = 'Background')
    data block: sig='8BIM' key='lnsr' length=      4
    (Layer name source = 'bgnd')
    data block: sig='8BIM' key='lyid' length=      4
    (Layer ID = 1)
    data block: sig='8BIM' key='clbl' length=      4
    (Blend clipping = 1)
    data block: sig='8BIM' key='infx' length=      4
    (Blend interior = 0)
    data block: sig='8BIM' key='knko' length=      4
    (Knockout = 0)
    data block: sig='8BIM' key='lspf' length=      4
    (Protected = 5)
    data block: sig='8BIM' key='lclr' length=      8
    data block: sig='8BIM' key='shmd' length=      4
    data block: sig='8BIM' key='fxrp' length=     16
    (Reference point X=0 Y=0)
channel 0:
>>> channel id = 0 @    1246, 5018114 bytes
    compression = 0 (raw)
    uncompressed size 5018112 bytes (row bytes = 2592)
channel 1:
>>> channel id = 1 @ 5019360, 5018114 bytes
    compression = 0 (raw)
    uncompressed size 5018112 bytes (row bytes = 2592)
channel 2:
>>> channel id = 2 @ 10037474, 5018114 bytes
    compression = 0 (raw)
    uncompressed size 5018112 bytes (row bytes = 2592)
layer 1 ("Curve"):
blending mode: sig='8BIM' key='norm'(normal) opacity=255(100%) clipping=0(base)
    flags=0x18(transp_prot(0) visible(0) bit4valid(1) pixel_data_irrelevant(1))
Layer 1 additional data:
    data block: sig='8BIM' key='curv' length=     48
    data block: sig='8BIM' key='luni' length=     16
    (Unicode name = 'Curve')
    data block: sig='8BIM' key='lnsr' length=      4
    (Layer name source = 'cont')
    data block: sig='8BIM' key='lyid' length=      4
    (Layer ID = 2)
    data block: sig='8BIM' key='clbl' length=      4
    (Blend clipping = 1)
    data block: sig='8BIM' key='infx' length=      4
    (Blend interior = 0)
    data block: sig='8BIM' key='knko' length=      4
    (Knockout = 0)
    data block: sig='8BIM' key='lspf' length=      4
    (Protected = 0)
    data block: sig='8BIM' key='lclr' length=      8
    data block: sig='8BIM' key='shmd' length=      4
    data block: sig='8BIM' key='fxrp' length=     16
    (Reference point X=0 Y=0)
channel 0:
>>> channel id = -1 @ 15055588, 2 bytes
    compression = 0 (raw)
    uncompressed size 0 bytes (row bytes = 0)
channel 1:
>>> channel id = 0 @ 15055590, 2 bytes
    compression = 0 (raw)
    uncompressed size 0 bytes (row bytes = 0)
channel 2:
>>> channel id = 1 @ 15055592, 2 bytes
    compression = 0 (raw)
    uncompressed size 0 bytes (row bytes = 0)
channel 3:
>>> channel id = 2 @ 15055594, 2 bytes
    compression = 0 (raw)
    uncompressed size 0 bytes (row bytes = 0)
channel 4:
>>> channel id = -2 @ 15055596, 2 bytes
# layer mask (   0,   0,   0,   0) (   0 rows x    0 cols)
    compression = 0 (raw)
    uncompressed size 0 bytes (row bytes = 0)
## end of layer image data @ 15055598
(global layer mask info section: 16 bytes)
## global additional info @ 15055618 (36 bytes)
    data block: sig='8BIM' key='Patt' length=      0
    (data: Pattern)
    data block: sig='8BIM' key='FMsk' length=     12
    (data: Filter mask)
    00 00 ff ff 00 00 00 00 00 00 00 32
merged image:
>>> merged image data @ 15055654
    compression = 1 (RLE)
    uncompressed size 15054336 bytes (row bytes = 2592)
done.

Thanks, Tom. The XML output of psdparse is much easier for me to interpret than the verbose console output I had been using.
Incidentally, I think I solved my problem today. From what I can tell, Photoshop cannot handle files with adjustment layers when the Background layer's compression is set to Raw (uncompressed). It's interesting, because PS has no problem opening my images with multiple uncompressed image layers, but as soon as I threw an adjustment layer in there, PS complained ("not compatible with this version of Photoshop").
Switching to RLE for the background seemed to do the trick.
Just an FYI / heads-up for anyone banging their head against this some time in the future.

Export to PDF from Autocad: Acrobat always opens PDF with 'layers panel and page' shown.

Hello,
Whenever I export to PDF from Autocad, Adobe Acrobat opens the PDF with the 'Layers Panel and Page' shown.
Each time I have to manually go to 'Properties' and select 'Page only', close 'Properties' and close the PDF and select to save the changes, in order to show the just the page.
Is there a way to make PDFs always export to 'Page only' automatically as default?
Thanks!
Ione

Thakns Peter, I had seen this thread, but it doesn't really address my issue. I've exported individual chapters from the book file, all with success, so I know there isn't a file corruption issue. The problem seems to do more with memory allocation/usage.
I have tried: quitting and then immediately exporting the file, and even rebooting and then relanuching and exporting. Both of these allow me to get a few pages farther along, but still not through the entire book.
I remember back in the day there used to be a setting for how much RAM/dis c space was allocated to a certain applicatino (I knowm it was a long time ago). I didn't know if there might be something like this hidden somewhere

Open file with... photoshop CS6 by clicking right mouse button..

Hi, I want to open a jpeg Picture with photoshop CS6 by clicking right mouse button open with....photoshop. The PS wont open the Pictures but freezes. I can only close it when using ctrl alt delete. I was asked to update the Version, which I did without success. CS also told me to reset the log file, with no success too, what else can i do to have this issue fixed?

Hi,
In the Finder doa Get Info ona NEF file, look for Open with..., change it to PS6, click the Apply to all box.

Cant open dng with cs 4 photoshop

Every time i try to open a DNG file i get could not complete your request wrong kind of document Any idea would be a great help ?

I havge done that i useedd the new comverter but photo shop says "could not complete your request wrong kind of document " Thanks

How can I open a psd file with layers in touch?

I want to edit a psd file with layers in photoshop touch. Is this possible?

No. (Kind of, sort of.) You can export PS Touch projects for import into desktop Photoshop and have the layers intact for further editing but you cannot do the reverse; any imported PSD will be automatically flattened. (I'm guessing this was done to prevent crashing. PS Touch supports 12 layers max vs. the potential thousands available in desktop Photoshop.)

Photoshop touch can I edit the text from a psd file with that app ....

Can photoshop touch edit the text from a psd file from my iMac on my ipad with that app ....

I don't think you can because a Photoshop file (PSD) with layers will be flattened when you open up in Photoshop Touch.
I prepared a Photoshop file with one layer of image, one layer of text over a background using Photoshop CS6 on my Mac Pro and upload the PSD file onto Creative Cloud. I then open this file in Photoshop Touch (on iPad) but it comes out as a single flat layer merging all three layers. Hope this helps.
Below: 3 layers in Photoshop CS6 (with one layer of text)
Below: Flattened into one layer in Photoshop Touch..

Opening PSD with layers in photoshop touch

Similar Messages

Maybe you are looking for