Opening query saved on lastmonth

Hello Gurus,
We have made some changes to query and workbook, Now i want to open that workbook which was saved on last month not the changes which we made after that. Is this possible???
Thanks in advance

Hi Mahesh,
If you didn't do a 'save as' then the old query/workbook definition will get overwritten. I don't think it will be possible to revert back to the last month version.
regards,
Sumit

Similar Messages

HT4641 after modifying a document in Pages I found that there are horizontal lines across every line break when opened and saved it in DropBox. Does anyone know why?

after modifying a document in Pages ON MY IPAD AIR I found that there are horizontal lines across every line break when opened and saved it in DropBox. Does anyone know why?

Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.

Report Designer - Error while opening a saved report

Hi,
I am not sure if this is an authorization issue or configuration issue.
When I try to open a saved report on Report designer, I keeping getting an error: Report Version is invalid: "0".
Has anybody faced similar problem?
We are on SP09.
Regards,
Payal.

Payal,
I am afraid, that your report might be corrupted. This might have happened, if in tx SE16 the version is changed. The Report XML displayed in SE16 for table RSERDATA, is limited to ca. 1024 charachters. When editing the version, after pressing the save button, the Report XML is cut off at 1024 charachters and the report is lost.
Please do not set the report version in tx SE16!
I will need to configure the program RS_REPORT_MAINTAIN, such that reports with version "0" can be saved with the minimum version 9.0.
Until then I recommend the following procedure for Reports that are ok, but have the Version "0" bug:
1) in tx SE38, program: RS_REPORT_MAINTAIN
    open your report with option "DT" (designtime)
2) Switch to Edit mode.
    Make a backup copy of the report using the "Save As" Button.
    You can copy the Report XML to the clipboard using Ctrl-A, Ctrl-C
3a) Open a dummy report in RS_REPORT_MAINTAIN created previously with
      Report Desginer ( --> The version is set to 9.0).
      Switch to edit mode and paste the Report XML and Save.
or
3b) Debug FUNCTION rs_bex_report_load_rfc.
      Open a report and change the value of E_REPORT_VERSION to "9.0"
      before leaving the function.
Hope this helps, karim
P.S.
I will update note 1016224

Getting error while opening a saved for later notification: The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action.

Hi All,
While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
This is a custom notification.
Please help.
Thanks
Raghava

HI All,
Please help on this issue.
Thanks
Raghava

Program error when opening or saving. Any fixes or workarounds?

I've been having troubles with opening and saving files in Photoshop CC since upgrading to Yosemite. The problem usually occurs when the save or open command is part of an action. I have the latest updates of both photoshop and Yosemite. It sounds like it's a known bug but I'd really like a solution or a workaround. Any suggestions?

Any other suggestions? As I stated in my original post, I have the most updated version of both photoshop and Yosemite. It was the first thing I checked.

I saw the responses on the page to opening and saving pdfs but it is cumbersome to shut down the function in Mozilla and work around it. Is there a fix coming?

Until the Firefox 23 update I had no difficulty opening or saving pdfs in Firefox, but since the most recent update (Firefox 23) I often get error messages about damaged files when I use the download button and try to open or save files. I've checked with another browser and they open or save fine. I've tried disabling the pdf but it is cumbersome. I am using MSWord 7 if that makes any difference. Is there a fix coming for this?

Hello,
In order to change the default reader for PDF files (to not open PDF files with Firefox's internal PDF reader), follow these steps:
#Go to ''Tools'' > ''Options'' (or ''Firefox'' > ''Options'').
#In the Options window, select the ''Applications'' tab.
#In the ''Search'' field, type ''PDF''. You should find ''Portable Document Format (PDF)''.
#On the right handside you should find an ''Action'' column. Use that to select Adobe Reader Plugin for Netscape (or something similar). Did this fix your problems? Please report back to us!
Thank you.

The report terminated with error: REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document.

Hi,
I'm getting the below error for reports.
The report terminated with error:
REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
found below
==================================================
Reports Servlet Environment Variables 11.1.1.4.0
Security Mode Non-secure
HTTP Environment Variables 11.1.1.4.0
SERVER_NAME   09.14.4.41
SERVER_PORT   8888
SCRIPT_NAME   /rwservlet
SERVER_PROTOCOL   HTTP/1.1
SERVER_SOFTWARE   undefined
GATEWAY_INTERFACE   undefined
SERVER_PORT_SECURE   undefined
ACCEPT   image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
REQUEST_METHOD   GET
REMOTE_HOST   test-wam-app
REMOTE_ADDR   09.14.4.41
REMOTE_USER   undefined
AUTH_TYPE   undefined
PATH_INFO   showenv
QUERY_STRING   server=RptSvr_test-wam-app_wamtest
PATH_TRANSLATED   undefined
CONTENT_LENGTH   undefined
CONTENT_TYPE   undefined
AUTHORIZATION   undefined
USER-AGENT   Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
REMOTE_IDENT   undefined
REFERER   undefined
Oracle Reports Services - Servlet Environment Variables Select to jump to the top of the page Return to Top
KeyMapFile   /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
DBAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
SYSAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
server   rep_wls_reports_test-wam-app_wamtest1
DIAGNOSTIC   yes
ERRORTEMPLATE   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
SERVER_IN_PROCESS   yes
COOKIEEXPIRE   30
ENCRYPTIONKEY   reports9i
DIAGHEADTAGS   undefined
DIAGBODYTAGS   undefined
HELPURL   undefined
RELOAD_KEYMAP   undefined
IMAGEURL   http://09.14.4.41:8888/reports/rwservlet
SINGLESIGNON   no
Oracle Reports Services - Server and Engine Environment Variables Select to jump to the top of the page Return to Top
PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
DISPLAY
LD_LIBRARY_PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
ORACLE_HOME   /u01/wamtest/FMW_11.1.1/apphome
TNS_ADMIN   /u01/wamtest/FMW_11.1.1/instance1/config
NLS_LANG   AMERICAN_AMERICA.WE8ISO8859P1
USER_NLS_LANG
RW   /u01/wamtest/FMW_11.1.1/apphome/reports
REPORTS_PATH   /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
REPORTS_TMP   /tmp
REPORTS_TAGLIB_URI   /WEB-INF/lib/reports_tld.jar
java.class.path   /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
sourceDir
tempDir
useDataCache
ignoreDataParameter
=========================================================================
ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
Reports server is up though without any issues.
Regards,
Djay

Ensure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
E.g.
report=<reports directory>/test2.rdf

Pages can´t open files saved in iCloud

I can´t open any file save to iCloud
I tried a workaraound:
I couldn´t open a file save to iCloud from my iPad.
I opened it from icloud.com and downloaded it to my iMac.
Opened the downloaded file, and everything semed ok.
I then closed the dokument and opened the file on my ipad again. Made som editing before I closed the dokument.
Then I tried to open it again in Pages on my iMac, but couldent open it.
Translated: Couldn´t open the file ".... ..."
I also tried to open a file saved to icloud (without opening it on other machines and devises). Pages couldn´t open those files either...
Can sombody help me?

Possibly you have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 110 features from Pages 5 and added many bugs.
Peter

Open Office saving documents to Pages

Open Office saving my documents (saved as Microsoft Word 97/2000/XP) in the program Pages. Meaning, documents with .doc are being saved to Pages instead of Open Office, so when I go to open the document, it opens in Pages instead of Open Office.

The problem isn't that they are being saved to Pages. The problem is that Pages is set as the default program to open them. You can change that by doing the following:
1. In Finder, find and select (highlight) a .doc file.
2. Click the "Action" button in the bar at the top of the Finder window and then click "Get Info"
3. The Info window has a section titled "Open with" -- change it to Open Office and then click Change all.

CS3 crashes when Opening and saving files - also runs slow

Today, while using photoshop, it locked up on me & I had to force quit. It then wouldn't open a file either via Bridge or the open menu. I could create a new file, but it would hang while attempting to save.
I downloaded and ran the FixVCUIFramework, and it allowed me to open and save 1 file, before it started not saving or opening again. Running the Fix again has no effect.
I switched to another user account, and everything works fine - in fact PS runs much speedier in the 2nd user account than in my main account. I hadn't noticed how slow it had become in opening and saving.
Any ideas of where to look in trying to repair my main account? I don't want to have to migrate everything over to the 2nd account. Bridge in the 2nd account doesn't allow me to open all my folders, so I'd prefer not to work totally with a new user account.
PSCS3 10.0.1
Mac 2GHZ dual 4.5 gig ram
10 gig external scratch disk - PS running at 71%
Mac OS X.4.11
A day without Photoshop is like a day without sunshine ...
Thanks

A forced quit WILL create corruption.
An Archive and Install of the OS will give you a fresh system in your regular account while preserving your settings. Should take you less than 45 minutes.
But you may want to try deleting your Photoshop preferences and running the 10.4.11 update over your existing 10.4.11 system first. That may work too, and it would be faster.

HT2523 textedit won't let me open a saved page; it won't let me save a version of a page; I go to Finder-Get info & all looks ok, but isn't - please help. I can't turn textedit off or else I lose the few pages that I was working on & that went to the doc

Please help me to open my saved TextEdit pages. Help me to "Save a version" of a revised TextEdit page. I'm not able to do either.
This happens every once in a while, and I don't know how to undo it. I go to Finder - Get info, and it looks like I have permission to "read and write", but nothing changes. Thank you very much for your time and help. : )

I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul

Unable to open query designer while able to access BI system

Hi Experts,
   I have problem while opening query designer, analyzer , WAD . I get the below error. But when i access the relevant BI system i am able to access it well , i dont get any RFC Error. Will there any port setting for query designer separately. This is problem faced at offshore which connects to client servers at onsite. Onsite guys are not facing any issues openning query designer or analyser. Please guide as i am not good in basis ..
RFC_ERROR_COMMUNICATION
Message
CMALLC : rc=27 > Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=163.164.XX.XXX, GWSERV=sapgw00, SYSNR=00
LOCATION    SAP-Gateway on host XXXXXXX/ sapgw00
ERROR       timeout during allocate
TIME        Mon Sep 12 14:20:38 201
RELEASE     700
COMPONENT   SAP-Gateway
VERSION     2
RC          242
MODULE      gwr3cpic.c
LINE        2066
DETAIL      no connect of TP sapdp00 from host 163.164.XX.XXX, after 20 sec
Thanks
Vamsi
Edited by: vamsi talluri on Sep 14, 2011 6:57 PM

Hi Experts,
   I have checked with basis team , my issue is resolved, please find the solution .
1) Add corresponding system server names in host files of the offshore desktops.
2) After that basis has added offshore natted ips in sap gatewat parameter/alternate hostnames in system profile (rz10 tcode).
Then offshore are able to access query deisgner etc....
Regards
vamsi

After installing the newest update, when I try to open a saved page Firefox only opens the homepage. Reset didn't help.

I am a web designer. I have saved pages that I update and upload to websites all the time. Now, after the latest updates, when I try to open these saved pages it only opens Firefox and loads the homepage. The saved page does not open. If I'm to keep using Firefox, which I would prefer, I need this functionality back.

''jscher2000 [[#answer-670981|said]]''
<blockquote>
What do you have set up as the default application for .html files? Or are you opening another kind of file that isn't normally/automatically associated with Firefox?
If you drag and drop the file onto a tab (which normally would replace the page there with the local file), what happens?
</blockquote>
I had tried all the suggestions. None of they helped. I can open the files by browsing for they after Firefox is open. I was able to spend some more time troubleshooting the issue yesterday afternoon. The issue has to do with the 64-bit file system. When I right click and select open with and then point it to the installation folder in the Program Files (x86) folder, it still won't open the file just opens to my home page. I did notice that when I was browsing for Firefox.exe that it defaulted to the Program Files folder not the Program Files (x86) folder. So I renamed the exe to LittleFox.exe and browsed for that exe and Firefox would then open the files as expected. So my guess is that it is a registry setting that is all the headache. I don't have time to run that problem down but will just use my workaround by renaming a copy of the exe and use that with my file association.
Thanks

Office 2013 applications cannot be made to show the "Documents" folder when opening and saving files

(Windows Server 2012R2 and Windows 8.1 PRO)
We are redirecting the user's "Documents" folder to the network (using Folder Redirection). The OS hides this fact however, and most applications simply see the "Documents" folder when opening or saving files, including Office 2003.
Office 2013 however displays the actual path, which in this case is:
\\sever1\redirect$\username\documents
Even if you forcibly set the "Default local file location:" in the Options Save area to the 'Documents' folder in, say, Word, Word immediately converts the local path to the network path.
Is there anyway to get Office 2013 to follow the virtual path? All of other apps follow it and expose the users only to "Documents".
Thank you so much.
Dana

There's nothing in my FAQ concerning screen savers, so I'm unsure why you decided to take that approach. From your description, it looks like you only tried a few of the suggestions before throwing in the towel. That's fine, it's your call.
I don't have the problems you described with 10.4.7. Usually when folks have problems after an update, these are caused by either installing an update on an already-corrutped system or they've installed third-party applications or hardware that have been rendered incompatible by the update.
Before installing software updates, you may wish to consider the advice in my "Installing Software Updates" FAQ. Taking the steps therein before installing an update often helps avert problems and gives you a fallback position in case trouble arises.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Getting below error while opening query in bex 3.5x

Dear Guru's
I am getting below error while opening query in bex 3.5x
The following object were not found when accesing the server .
Press repair to correct the problem (included parts of query deleted) press cancel to undo the last action.
Regards
Karan

Hi,
1) When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
2) so create an authorization object for each of these attributes with * (full authorization)
Regards,
Marasa.

Opening query saved on lastmonth

Similar Messages

Maybe you are looking for