Opening Query: u0091BEx transport request '' is not available or not suitable"u0092
Hello,
I tried was able to run and modify a query last week. When I try to modify/run it now, it gives the message below and allows me to run it but not modify.
BEx transport request '' is not available or not suitable"
What are the possbile causes and remedies to this problem?
Thanks in advance.
dear Amanda,
here can imply 'copy' since as the result objects(query and elements) in production are exactly same with dev. but the terms 'copy' itself in query normally refer to copy query from one infoprovider to another infoprovider.
(transaction rszc).
i think she mean the query objects included in transport request and will be carried on to qa/production server.
once the new queries 'placed on transport'(in request), we must immediately create a bex request for the same package, otherwise nobody can save their queries (that included in the request).
transport bex
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
copy query
http://help.sap.com/saphelp_bw33/helpdata/en/9f/f57539d6d1c93be10000000a114084/frameset.htm
hope this helps.
Similar Messages
-
U0093BEx transport request u0091ABC3005000u0092 is not available or not suitableu0094
Hi,
In our development, I tried to modify an old report but got the message
BEx transport request ABC3005000 is not available or not suitable
and opened up in BEx but in a read only mode.
My goal was to modify this report.
I therefore spent time to create a new report just like the original report with my modifications. On the next day, I wanted to make some changes in the new report but in opening it, I got the same message as the original one:
BEx transport request ABC3005000 is not available or not suitable
What seems to be going on? What can I do to be able to make modifications in BEx
without this massage?
The switch Change mode is no available to switch.
I assume it implies that the query has been transported already so it wont allow additional changes, but why it the same problem with the new one just created?
ThanksHi,
I went through the steps you suggested:
RSA1 -> Transport Connection
Create transport requests for Bex (BEx truck icon); I double-clicked on a package (click on Assign/Delete) and created a new transport request AABB555.
The problem is that, right after that when I open BEx, select Add-Ins, Open Queries, it attempts to open but instead of bringing up the list of queries for selection to attempt to edit, BEx flashes and freezes up.
Then from there BEx freezes up. Any ideas?
I went into se09 and deleted the new transport request AABB555;
Now, BEx can open up the queries instead of the freezing up, but it gives the message:
"BEx transport request 'AABB555' is not suitable or available. Request/task AABB555' does not exist"
When I choose OK, it brings me into the query but still only in read only mode and can't edit.
Any more ideas? -
BEx Transport Requests '' ist not available or not suitable
hi, all,
I want to change a query, that has been transported back from Prod.System into TestSystem. Changes in the query aren't possible - the error message is
" BEx Transport Requests '' ist not available or not suitable ".
Now, there is a Standard BEx Transport Request and, in the RSA1 -> Transport Connection I see the query complete with that Transport Request.
What can the reason be? Any Idea?
Thanks a lot in advance.
nevenCiao, Paolo,
thank you for the quick responce.
I did exactly as described :
The easiest thing to do is the following:
1) collect your query in transport connection
2) check if it is already assigned to a transport
2a)if assigned to a transport check if this is the standard bex transport. If so go to step 3, If not see if you should just tranport that request (or you can just go to step 3...but i wouldn't advise that)
3) unlock the standard bex request
4) now go back to transport connection and put the collected objects in a new request
5) release and transport your new request
It still doesn't help. I can't change the Query. The error-message is stil the same.
best regards
neven -
BEx Transport Request is not available or not sitable
Hi,
When i try to install some queries from Business Content in the BW DEV box, the error was :
<b>BEx Transport Request is not available or not sitable</b>
Please let me know what has to be done in order to get out of this error
Thanks & Regards,
KishoreHi Ken,
Thanks for responding to my problem.
You are right. I am installing from business content queries that have never been installed before.
so when i am installing the queries from business content the error was :
BEx transport request is not suitable or not available.
How to proceed now ?
Please give reply ASAP....
Thanks & Regards,
Kishore -
(Request for reporting available) is not coming in Cube
Hi All,
I have Cube & DSO.
I added fields in DSO & Cube.
Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
thanks in advance,
Kiran.Hi ....
Have you done the Roll up ?
Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
Regards,
Debjani.... -
"Request for Reporting available " is not displayed after loading the data.
Hi
A DSO feeds the data to a cube and DSO. In dso reporting sysmbol is present. However in the cube "Request for Reporting available " is not present in the manage tab of the cube.
Please advise on this.
Regards
loyeeHi,
What is the status in Monitor. If it is ok, go to manage of the infocube,
in that screen on the menu, Environment --> Automatic Request processing. Then you will get three check boxes.
Click the first check box, (Set Quality status to OK). If you aggregates, choose second box.
Hope this helps.
Regards,
Rama Murthy. -
Bex Transport request is not available or not suitable
Guys,
I need to make changes to query when I open it...it's saying Transport req is not available. So I have collected the query in a new transport in transport connection, but when I go back to the query its still giving the same error message. How do I resocve this error?
The transport it is showing in the query was deleted, so I cannot use the old transport.
Thanks,
KrisHello Kris,
What Mahesh said will solve your issue but once you transport that request you will again get the same error when you open any query in BEX. One way to get around this issue is for the first time create a request using the BEX transport button in transport connection and always keep this request open. If you want to transport a query that is assigned to this request just unlock this request using se03 and then collect your query and the corresponding objects in a new request in transport connection and transport the new request. This way atleast everytime you open a query you will not get the error.
Hope this helps.
Thanks -
Bex transport request 'BWDK900073' is not available or not suitable
Hi,
i have transported a cube with "data flow after" option and collected in a package zbexquality.
this request was transported to productin and i can see the queries in production too.
now when i go to change any of the queries on this cube, it gives me the following error:
==========
Diagnosis
There are the following possible causes:
No request has been set up as the standard transport request for BEx objects.
The (set up) request 'BWDK900073' (for the package 'ZBEXQUALITY' ) has already been released.
The (set up) request 'BWDK900073' (for the package 'ZBEXQUALITY' ) is not of the type 'transportable change request'.
System response
The request BWDK900073 can not be used to record changes to BEx objects (queries or Excel workbooks). The changes made to objects you are editing will not be logged.
Procedure
If you want to record changes to BEx objects, set up an open transportable change request as the transport request for BEx objects. (If the package 'ZBEXQUALITY' is not empty, set up a request for this package).
Inform your system administrator of your actions, or enter a new, targeted transport request in the Administrator Workbench in the transport connection by using the 'BEx' pushbutton (Create Transport Requests for BEx).
Procedure for System Administration
====================
when i try to change any other queries( transported using different request and different package earlier), it gives me teh same message.
what is the reason? what is wrong?
thank u in advancehi S B,
as mentioned in your previous thread,
each time you released request for query to be transported for 1st time, you will need to create
BEx request with same package as soon as the request released, otherwise you won't be able to save changes
to the query in that request.
rsa1->transport connection->icon truck and bex,
assign with package ZBEXQUALITY.
hope this helps.
ZBEXQUALITY is not a good naming. some sample
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
Customer Package Description
ZBW BW Package for Custom Objects
ZACTPAY Accounts Payable - Query-only package
ZACTREC Accounts Receivables - Query-only package
ZCONTROLLING Controlling - Query-only package
ZSALES Sales and Distribution Query-only package
ZFIAA Fixed Assets - Query-only package
ZPROJ_SYS Project Systems Query-only package
ZPURCH Purchasing - Query-only package
ZSP_LEDGER Special Ledger - Query-only package -
Query Changes Transport Request
I created TP request for query keyfigure properties decimal poing change.I imported TP request to GRA. I have not seen changes in GRA.
Query in GRA is Display mode. when i try to open the query i am getting message authorisation check is required.
anybody idea how to reflect the changes in GRA query keyfigure decimal point changes.
please let me know.Hi,
You have to make sure that all the elements of the queries are captured in the transport request. For that, in transport connection, while capturing the query, filter on "ELEM" and include them in transport connection.
As for authorization, you will not have it except in development. Thatu2019s the reason why you can not change the query in GRA directly. You always have to transport the changes.
Regards,
Yogesh -
Assigning a SAP Query to Transport Request
Hi Friends
I have a SAP Query, now I want it to transport to the other system, while saving the query it is not prompting for transport request. Is there any possibility to assign that SAP Query to a transport request, if yes, please let me know the process.
Regards
PraveenDear All,
This regarding creation of SAP Query .
Situation:
Infosets and User Groups were created in a DEV SERVER CLIENT 200 and saved in a request ie.REQ01
Now i wanted to create a Query QU01 in the Same User Group in DEV SERVER CLIENT 210 so i tried creating a Infoset but i get this error message
Note: I am not able to create & save an Infoset.
Message no. TK414
Diagnosis
You cannot edit request D01K901880 of user X00012, since this request is reserved for changes in client 200. You are logged on to client 210.
Can anyone clear this error? what is the solution?
Thanking You
Andrew -
Query - Finding Transport Request
Hello Everyone,
I have queries in different transport requests. Given a query, how do i find out the corresponding transport request it is associated with.
ThanksHi
There are a few way's.
here is quick one:
go to RSA1,'Transport Connection',Query here look for the Query name and copy its technical name.
next, goto se01 and list allthe open transports.
then, stand on the upper node and expand all (via right click).
now search for the Query tech string.
look at this example:
BD3K901829 EHAYUT Repair
5 Elements of the Query Builder
08PZF7C9RLQDY096E84FDEP5P 0FKIJTURI31LH2H7YB9QIH8RF 0NFU8RCIYLVISNUB70IQN6653
0OPF8SUCLC6JYHIUS40FDPRTW
2KUERICC8W93EDPYQHDI24AH
Reg's
Edan -
ChaRM Reporting - Transport Request, Tak and Owner columns not filled
I am using ChaRM reporting functionalities (/TMWFLOW/REPORTING transaction). When I select "display header, project, task list and transport", transport request, task and owner columns are not filled with values.
What is the problem?
Thanks
AntonelloHi,
1. Is it configurd for ChaRM functionality in your systme landscape.
2. If not, please do the ChaRM configuration using by tcode SPRO.
Regards,
Srini Nookala -
Requested resource not available - can not find servlet
I have an application in tomcat that uses jsp and servlets. The JSP works fine, but I keep getting a "requested resource not available" erroe when i try to access a servlet. My jsp is in a directory called ProjectManager, and my servlet classes are in WEB-INF/classes inside ProjectManager and are in a package called pmt.
I can access my jsp using localhost:8080/ProjectManager/index.jsp, but I cannot seem to access the servlets, regardless of the URL I try. I've tried adding a servlet-name and a servlet-mapping in the web.xml file but I'm still stuck.
Does anybody have any ideas?
Thanks in advance.What jar files should be in the library? I have the following:
commons-lang-2.4(2).jar
mysqlconnector-java-5.1.6.bin.jar
webserviceutils.jar
Here is my web.xml as I too am getting "the request resource....cannot be found:
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>
classBlog</display-name>
<servlet>
<description>
</description>
<display-name>
DriverServlet</display-name>
<servlet-name>DriverServlet</servlet-name>
<servlet-class>
edu.ec.web.classBlog.DriverServlet</servlet-class>
</servlet>
<servlet>
<description>
</description>
<display-name>
AddEntityServlet</display-name>
<servlet-name>AddEntityServlet</servlet-name>
<servlet-class>
com.ec.blog.web.AddEntityServlet</servlet-class>
</servlet>
<servlet>
<description>
</description>
<display-name>
DeleteEntityServlet</display-name>
<servlet-name>DeleteEntityServlet</servlet-name>
<servlet-class>
com.ec.blog.web.DeleteEntityServlet</servlet-class>
</servlet>
<servlet>
<description>
</description>
<display-name>
EditEntityServlet</display-name>
<servlet-name>EditEntityServlet</servlet-name>
<servlet-class>
com.ec.blog.web.EditEntityServlet</servlet-class>
</servlet>
<servlet>
<description>
</description>
<display-name>
ViewBlogServlet</display-name>
<servlet-name>ViewBlogServlet</servlet-name>
<servlet-class>
com.ec.blog.web.ViewBlogServlet</servlet-class>
</servlet>
<servlet>
<description>
</description>
<display-name>
ViewEntityServlet</display-name>
<servlet-name>ViewEntityServlet</servlet-name>
<servlet-class>
com.ec.blog.web.ViewEntityServlet</servlet-class>
</servlet>
<servlet>
<description>
</description>
<display-name>
AddEntryServlet</display-name>
<servlet-name>AddEntryServlet</servlet-name>
<servlet-class>
com.ec.blog.web.AddEntryServlet</servlet-class>
</servlet>
<servlet>
<description>
</description>
<display-name>
DeleteEntryServlet</display-name>
<servlet-name>DeleteEntryServlet</servlet-name>
<servlet-class>
com.ec.blog.web.DeleteEntryServlet</servlet-class>
</servlet>
<servlet>
<description>
</description>
<display-name>
EditEntryServlet</display-name>
<servlet-name>EditEntryServlet</servlet-name>
<servlet-class>
com.ec.blog.web.EditEntryServlet</servlet-class>
</servlet>
<servlet>
<description>
</description>
<display-name>
ViewEntryServlet</display-name>
<servlet-name>ViewEntryServlet</servlet-name>
<servlet-class>
com.ec.blog.web.ViewEntryServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>DriverServlet</servlet-name>
<url-pattern>/DriverServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>AddEntityServlet</servlet-name>
<url-pattern>/AddEntityServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>DeleteEntityServlet</servlet-name>
<url-pattern>/DeleteEntityServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>EditEntityServlet</servlet-name>
<url-pattern>/EditEntityServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ViewBlogServlet</servlet-name>
<url-pattern>/ViewBlogServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ViewEntityServlet</servlet-name>
<url-pattern>/ViewEntityServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>AddEntryServlet</servlet-name>
<url-pattern>/AddEntryServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>DeleteEntryServlet</servlet-name>
<url-pattern>/DeleteEntryServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>EditEntryServlet</servlet-name>
<url-pattern>/EditEntryServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ViewEntryServlet</servlet-name>
<url-pattern>/ViewEntryServlet</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
</web-app> -
Query regarding transport request
Hey guys,
I have a question regarding transport requests.
If only the report source code is included in the transport request, the text elements of the program will not be transported to the next box?
when you transprot the main program or the function pool, does it follow that all the changes in FM's under the function pool will be transported to the next box?
Thanks a lot!
Rgds,
MarkHello,
If you create transport request with just the report, text element will not be transported:
LIMU REPS <Program>
For text element, you need the following transport entry:
LIMU REPT <Program>
If you want to transport both, you can have the following entry:
R3TR PROG <Program>
If you have the following transport, all the components of function pool will be transported.
R3TR FUGR <Function Group>
Thanks,
Venu -
"battery not available", battery not charging
I just bought a NuPower battery fo my IBook G4. It's been working fine for a month or so. However, now my computer won't charge the battery. Near the battery icon at the top of the screen, it at first says "caluculating..." and then says "battery not available". Further, sometimes even when the power cord is plugged in (and the LED's are lit up), it still runs on the battery power and says the power is not plugged in. And, the lighting on the LED's do not correspond at all with the battery charge(i.e. it is sometimes green even though there is no battery power). Maybe these are 2 different problems?
Any advice would be appreciated-I'm no where near a MAC service provider.There are two things you could try.
1. "Resetting PowerBook and iBook Power Management Unit" (PMU)
Performing a PMU reset returns the iBook and PowerBook hardware, including NVRAM,
to default settings and forces the computer to shut down. ...
http://support.apple.com/kb/HT1431 - 36k - Cached - Similar pages
2. "Calibrating your computer's battery for best performance"
The battery needs to be recalibrated from time to time to keep the onscreen battery
time and percent display accurate. With all iBooks and PowerBook G4 ...
http://support.apple.com/kb/HT1490 - 27k - Cached - Similar pages
"Mac OS X 10.4 Help: Calibrating an iBook or PowerBook battery"
If you have an iBook or PowerBook portable computer, you should calibrate the
battery to get the longest running life during the first week you have your ...
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1959.html -
Also, you may see what the computer's power and battery life look like in
the Profiler's energy/battery logs. Some widgets are good for battery info.
The battery seller may have some kind of support, since that part is not
an original replacement part and may have issues of its own. Sometimes
the recalibration and pmu resets will help new batteries work properly.
Good luck & happy computing!
Maybe you are looking for
-
Hi everyone, My kids have taken over our older Apple devices - i.e. iPhone and iPad - and have currently got our old stuff, apps, emails etc on their devices. I want to start these devices on a fresh start - although they've got a selected few apps t
-
Numbers instead of names in SMS
Today, my N95 started to use numbers instead of names on SMS messages. I've looked through the other topics about this, and there are no duplicates, and it didn't seem to do this before. Powering off, deleting and remaking contacts all don't seem to
-
Hi friends, I'm am doing a project in BSP. I'm generating various reports like 1. purchase order 2. sales order 3. grr etc. I want to provide a facility so that user will be able to download these reports in PDF format. i just wanted to know, 1. Is i
-
Hi Experts, Could you please describe more detail about the new user type profiles in B1 8.8 SP00 PL17 ? Please help. Regards, Andres
-
I added an image to my envelopes-HOW DO I DELETE IT?
So I was playing around when I was printing envelopes from Contacts. I saw where it says add image. I wanted to see what it was and so I just scrolled through and add a .png image. the problem now is that I don't want anything and there is no option