Opening saved audio files...PLEASE HELP!

Hi People
I used Nokia PC suite to transfer audio recordings to my pc, but when i try open the file it opens up Nokia content copier. No matter what i try i can't get the audio files to play.
Can anyone help? Please!!!
Thx

Which phone do you have?
Try using Mass Storage (file Transfer) mode and drag and drop the files to your PC.
If I recall correct the files should be .AMR or .WAV so once you have the phone connected via USB file transfer you should be able to navigate from Windows Explorer. Find the .AMR or .WAV files (the recordings) and then right click on them and select Open With... and select Quicktime
They should play.
IF they are WAV format in your phone they also play in Windows Media Player.
640K Should be enough for everybody
El_Loco Nokia Video Blog

Similar Messages

Saving/Deleting Files - Please Help!

I am running Illustrator CS on Windows and have this intermittent problem:
Sometimes when I go to save an ai file, I will get a warning that says:
"The file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder."
I never set up a file as Read Only (I wouldn't even know how if I wanted to) and it is a stand-alone computer so I know that no other user has it open. Has anyone else seen this or know what to do?
Not only does this not allow me to save the file without renaming it, but if I try to go back to delete the previously named file, I get this warning:
"File in Use - The action can't be completed because the file is open in another program. Close the file and try again."
So, by the time I am done saving a file a few times, I have several different versions with different names that are filling up tons of disk space with files that can't even be deleted.
I am the only user, so I know these files are not in use by other users. I can even try to delete it from Windows Explorer with Illustrator closed and it still tells me the file is in use.
I contacted Adobe Support to help and they said my software was expired and would offer no help, so I am turning to you folks for help.
Thanks!!

It might be a permissions problem and perhaps someone like Mylenium or jacob will stop by to help you fix it or it could be your settings folder is corrupt in the case try this
1. Quit Illustrator.
2. Rename the AIPrefs file (for example, to AIPrefs.old) in the Users/(user)/AppData/Roaming/Adobe/Adobe Illustrator CS3 Settings folder.
3. Start Illustrator. Illustrator creates a new preferences file.

Captivate 5 won't open Captivate 4 files~Please HELP!

I upgraded from Captivate 4 to the eLearning Suite 2 with Captivate 5. So far, everything's been great, except for the problem I'm having now and how rude the Adobe Tech Support guy I talked with yesterday was.
I can't open my Captivate 4 files with Captivate 5. When I try to, it acts like it's working, then freezes on "Opening Project(s) - Upgrading Resources" (see below). Eventually, it times out and closes all together.
I've tried opening 2 different files and on 2 different machines, one is Windows 7 and the other is XP (both with Captivate 5). I even called Adobe Support, being that I just purchased a $2000 single-user eLearning Suite I thought they would be somewhat helpful, and was told very rudely that Tech Support cannot help me because my computer is connected to a network! Seriously? Needless to say, I'm very frustrated right now, especially under a deadline to update projects I can't even open. Please Help!! Are Captivate 4 files just not compatible with Captivate 5? It's a huge project and I'd hate to have to start over again.
Thanks for any information you can provide me! I'm desperate!

I was never given a case number when I spoke with Tech Support.
I appreciate the offer to help, but this problem was three months ago, on July 28th (sometime around 4pm Mountain Time that I called Tech Support). I was unable to find a solution, and had to spend weeks recreating my projects. At this point I do not need additional support or solutions, although it would have been nice to have back in July. I just wanted to pass my feelings along and share my frustration. I love Adobe's products, but I feel like a sucker that I paid so much money only to increase my workload by that much. Then, it took 3 months of complaining on this forum to get any attention from Adobe. I do really appreciate the offer to help, but by now it is just way too late.
I understand that with new software there are always bugs, quirks, and other problems that need to be worked out. The issue I experienced with the software was only a small fraction of the overall problem. The worst part is that Tech Support was so unwilling to help. The guy I was transferred to refused to talk to me, saying that they don't support the product if it is used on a computer that is on a network. How is that even possible? How many people are going to purchase expensive e-Learning software and not be employed by a company that uses a computer network? He wouldn't make any effor to help, give me any suggestions, or check to see if it was a known bug. The only thing he would tell me is that they don't support it if it's installed on a computer that is ever connected to a network. An acceptable Tech Support group would empathize and do their best to help, even if they are unable to fix the problem right away.
Obviously this is not an isolated incident, as you can find thousands of customer complaints about Adobe Tech Support online. I have personally known dozens of coworkers and friends that have had similer experiences to mine when calling Adobe. I can only hope that someone at Adobe can pull their head out of the sand, recognize the problem with your support team, and do something to correct it.
Again, thank you for the offer to help. I hope I have expressed my opinions and feedback in a way that can help. All I can ask is that you do something to improve your support group, so that if I ever have a problem again that requires Technical Support from Adobe, I don't have to deal with the same ordeal again.

Audio files PLEASE HELP

ok, can someone explain to me why when i recorded the tracks they had no digital cliping on it and now i just opened the project and they all clip. help me out please

Hi Bassmasterjosh,
There are a few tyes of clippping distortion.
1. The file is distorted. Check your audio file in the sample editor window, and check the peaks. Are they horizontal? Are they normal?
2. The mix buss is distorted, and the resulting mix is distorted. TURN DOWN THE VOLUME of all the tracks!!!
3. The audio driver is bad / corrupted, but still passing audio. This means your audio files are all goood, and your mix buss is not distorting either. You have to re-install the audio driver for your audio hardware. Make SURE the driver is the right one.
Now, which one of these three possibilities is it? Or is it something else?

How to play the audio file please help me

i would like to play audio files such wav files, au files etc
I would like to know how to play audio file easily in Applet and
applications
Thank you

import sun.audio.*; //import the sun.audio package
import java.io.*;
//** add this into your application code as appropriate
// Open an input stream to the audio file.
InputStream in = new FileInputStream(Filename);
// Create an AudioStream object from the input stream.
AudioStream as = new AudioStream(in);
// Use the static class member "player" from class AudioPlayer to play
// clip.
AudioPlayer.player.start(as);
// Similarly, to stop the audio.
AudioPlayer.player.stop(as);

Failure, can't open Adobe .pdf file - Please Help

Hello,
when I save a .pdf document to SAP (Code: CV01N), as you can see in the picture below, and try to open it, I get the failor "Network address DEFAULT of your computer is not maintained".
I'm really new in SAP and don't know how I can change the network or somthing else to solve this problem.
http://img196.imageshack.us/img196/5475/forum2t.jpg
I would be so happy if you can help me. Thanks.
Regards
Marc

Hi,
Please go through below link:
http://www.sapfans.com/forums/viewtopic.php?f=23&t=285987
http://sap.ittoolbox.com/groups/technical-functional/sap-log-pm/attach-document-with-equipment-495748?cv=expanded
Thanks
sunny

Can't open my flash file- please help!!

Hi! I just taught myself Adobe Flash and created a very intricate file with lots of moving parts. I saved it and then went to improve it. Of course it was taking forever so I got up from the computer to let it do its thing and I accidently knocked out my external harddrive. A lil freaked out I exited out of adobe flash- plugged it back in and went to open my file. However, it wont open now! I've saved it a dozen times after I added each new part but I have nothing now! Is there a way to get it to open? The message that comes up simply says failed to open document.
Thanks!!
Oh I'm using CS3 by the way.

Hi,
This error normally pops up if a fla is tried to open in a lower version IDE.
For eg. a CS4 fla is tried to open in CS3.
But in your case its the CS3 only.
So I feel the file some how got corrupted.
Warm Regards
Deepanjan Das
http://deepanjandas.wordpress.com/

Failor, can't open Adobe .pdf file - Please Help

Hello,
when I save a .pdf document to SAP, as you can see in the picture below, and try to open it, I get the failor that SAP is not able to open this .pdf in the "DEFAULT" Network.
I'm really new in SAP and don't know how I can change the network or somthing else to solve this problem.
[http://img196.imageshack.us/img196/5475/forum2t.jpg]
I would be so happy if you can help me. Thanks.
Regards
Marc
Edited by: Marc Brausen on Jun 11, 2009 8:55 PM

Marc, you might want to post this question in the Basis forum, or ask a moderator to move this thread. You'll most likely get more qualified responses there.
SAP NetWeaver Application Server
Also you might want to provide more details as to what kind of document you're trying to open (e.g. in what transaction). And, instead of posting the pictures, just specify the message text and/or message class and number (e.g. V1 100). The error messages are unreadable on your pictures.
And, better yet, ask your manager to get a qualified Basis admin.

Why is print in grey and PDF not a saving option for only one of my photoshop files? All other files I open are fine. Please help!

I am trying to turn a photoshop document in to a pdf. Print is in grey and under Save As PDF is not an option. Any other PS document I open allows me both options. What is wrong with this document?!
What I have tried and was unsuccessful:
I changed it to illustrator and saved as PDF but the colors were very dark.
I have renamed it and opened again.
I duplicated the layers to another doc.
Closed PS and opened it again.
Please help. Thanks!

Here is what I see...
It is in RGB color / 32 bits/channel
Any suggestions?

Hi, I have a problem with opening files on my desktop. When i double click a file I would lime to open nothing happens. Please help me with this problem :)

Hi, I have a problem with opening files on my desktop. When i double click a file I would lime to open nothing happens. Please help me with this problem

hello, this might be a preference in your google search settings. go to google.com/preferences and disable the option to ''Open search results in a new browser window''.

Illustrator CS4 wont save files, please help?

You can edit a file, go to save, close it down, then when you re-open it the changes made have not been saved?? No error message or warning pops up, and it all looks ok like it has saved properly, until you open it up again. This also happens when you use 'save as' command if you use the original file name. If however you type in a different file name - it saves ok. But obviously that is not great as you cant now trust or rely on the save mechanism of the programme, to make sure any changes to artwork have been stored!! I have never seen an issue like this, it is worrying, I hope somebody can help?
Thanks.
We are running CS4 on windows7 - yes PC!!!

We save in EPS, and its not just one file, its a variety of different files and it seems to be random as to which files it does it on, some work fine - some don't. And it can be anything from a minor text change to a colour change, it doesnt seem to matter on the change made, it reacts the same.
The files are saved over a network connection to a large external hard drive.
Its really puzzling and now starting to cause problems as we do a fair bit of work in it, and can't trust one of the most important features, and that any changes that have been done have been saved and stored!
Hope maybe you can help with any thoughts at all.
Cheers.
Date: Thu, 24 Jun 2010 03:41:40 -0600
From: [email protected]
To: [email protected]
Subject: Illustrator CS4 wont save files, please help?
What file format do you save it in?
What kinds of changes did you make in that file?
Where do you save the file (removable or network media)?
>

Lost unsaved Garage Band File - PLEASE HELP

Lost unsaved Garage Band File - PLEASE HELP
I had an audio file made on Garage Band but it was unsaved. I left my computer on at night and for some reason this morning my computer had seemed tor restart. I opened the garage band file but nothing came up.
Is there any way I can recover this 'unsaved file'? It must be stored in cache somewhere.
Someone please advise.
Thanks.

I would just like to say Thanks to HangTime up there. This trick worked 100% ... I had recorded 8 or 9 rather long tracks; for an unexpected reason (first time I've ever seen the "gray screen of death") the popup window came up and in several languages told me I needed to restart the computer; did what it told me to, begrudingly. Came back online, opened the GB file, nothing was there. Yet, when I checked package contents for the file (which I didn't even know existed, compartmentalized "Media", until after reading this), there were the tracks! I owe you both for getting this up and running... album creds just may be in line. ~Matt

HOW TO - Create new from clipboard and process multiple files - please help

Need help - have new version of photoshop on trial only ATM...
Want to know - HOW TO:
1. Create new from clipbaord
2. Process multiple files
Please help.

For clipboard copy, I start with File > New and the size will be set to what's in the clipboard. Then once the new file is opened, Edit > Paste will place the clipboard contents as a layer in the new document.
You must remember to use the command Layer > Flatten Image of you want to save as jpeg or any other file format that doesn't support layers.
For processing multiple files,
File > Automate > Batch or
File > Scripts > Image Processor...
Check the User guide or google information for those commands if you have specific needs.
Gene

Getting "a drawing error occurred" in Acrobat XI, able to open in Acrobat X, please help

Getting "a drawing error occurred" in Acrobat XI, able to open in Acrobat X, please help

I have had the same problem. Have you found an answer. I solved my problem by
opening the file in acorbat and reducing the size to be compatible with Acrobat 6 or later and it gave me a message that
a masking file was omitted and now i do not get the error when i download the file from the server.

Unable to view SAP Help files --Cannot Open Frameset.htm Files from 'help.s

Unable to view SAP Help files --Cannot Open Frameset.htm Files from 'help.sap.com'
Open Internet Explorer
Types in http://help.sap.com/
Click on mySAP ERP
Click on English
The webpage goes to
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
It shows the status done but what I see is just a blank page
I tried going to different areas of SAP Help files but no success
I cannot even open Help on Help http://help.sap.com/saphelp_erp2004/helpdata/en/3f/a42938955df162e10000009b38f842/frameset.htm
None of the other users have this issue

Hi
I am able to open your links. I think there is some problem in your internet explorer. please check
regards
Srinivas

Opening saved audio files...PLEASE HELP!

Similar Messages

Maybe you are looking for